English dropdown-ico

Manual Alto-Shaam 500-2D

27 pages 2.03 mb
Download

Go to site of 27

Summary
  • Alto-Shaam 500-2D - page 1

    MN-29742 (R e v . 1) • 04/13 p r i n t e d i n u . s . a . Drawer Warmers Electric Models : 500-1D, 1DN 500-2D, 2DN 500-3D, 3DN   • InstallatIon  • operatIon • MaIntenance W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 USA PHONE: 262.251.3800 • 800.558.8744 USA / C A N A D A FAX: 262.2 ...

  • Alto-Shaam 500-2D - page 2

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • b Delivery ............................................................................. 1 Unpacking ........................................................................ 1 Safety Procedures and Precautions ................................. 2 Installation Ins ...

  • Alto-Shaam 500-2D - page 3

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 1 DELIVERY This Alto-Shaam appliance has been thoroughly tested and inspected to ensure only the highest quality unit is provided. Upon receipt, check for any possible shipping damage and report it at once to the delivering carrier. See Transportation Damage and ...

  • Alto-Shaam 500-2D - page 4

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 2 CAUTION Used to indicate the presence of a hazard that can or will cause minor personal injury, property damage, or a potential unsafe practice if the warning included with this symbol is ignored. CAUTION Used to indicate the presence of a hazard that can or w ...

  • Alto-Shaam 500-2D - page 5

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 3 SITE INSTALLATION This Alto-Shaam appliance must be installed in a location that will permit it to function for its intended purpose and to allow adequate clearance for ventilation, proper cleaning, and maintenance access. 1. This appliance must be installed o ...

  • Alto-Shaam 500-2D - page 6

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 4 12-5/16" (312mm) 24-5/8" (624mm) 43-3/8" (1101mm) 24-7/8" (631mm) 26-1/8" (664mm) 25-7/8" (657mm) 11-5/8" (296mm) 18-15/16" (481mm) 500-1D 500-2D 500-3D Electrical Connection 6-3/4" (171mm) FOR LEG ST AND OR 5" ...

  • Alto-Shaam 500-2D - page 7

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 5 26-1/8" (664mm) 31-3/16" (792mm) 11-5/8" (296mm) 18-15/16" (481mm) 500-1D 500-2D 500-3D Electrical Connection 6-3/4" (171mm) FOR LEG ST AND OR 5" (127mm) CASTER ST AND ASSEMBL Y 4-7/8" (121mm) FOR CASTER ST AND ASSEMBL Y WITH ...

  • Alto-Shaam 500-2D - page 8

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 6 1. An identification tag is permanently mounted on the cabinet. 2. Plug cabinet into a properly grounded receptacle ONLY, positioning the unit so the power supply cord is easily accessible in case of an emergency. Arcing will occur when connecting or disconnec ...

  • Alto-Shaam 500-2D - page 9

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 7 This appliance is intended for use in commercial establishments where all operators are familiar with the purpose, limitations, and associated hazards of this appliance. Operating instructions and warnings must be read and understood by all operators and users ...

  • Alto-Shaam 500-2D - page 10

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 8 1 . PREHEAT AT 200°F (93°C) FOR 30 MINUTES BEFORE LOADING FOOD. Push power switch to “ON” position. The unit will begin operating at the previous set temperature. 2. Press the Up or Down Arrow Keys to 200°F (93°C). Pressing and releasing the Arrow Keys ...

  • Alto-Shaam 500-2D - page 11

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 9 GENERAL HOLDING GUIDELINES Chefs, cooks and other specialized food service personnel employ varied methods of cooking. Proper holding temperatures for a specific food product must be based on the moisture content of the product, product density, volume, and pr ...

  • Alto-Shaam 500-2D - page 12

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 10 CAUTION TO PROTECT STAINLESS STEEL SURFACES, COMPLETELY AVOID THE USE OF ABRASIVE CLEANING COMPOUNDS, CHLORIDE BASED CLEANERS, OR CLEANERS CONTAINING QUATERNARY SALTS. NEVER USE HYDROCHLORIC ACID (MURIATIC ACID) ON STAINLESS STEEL. NEVER USE WIRE BRUSHES, MET ...

  • Alto-Shaam 500-2D - page 13

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 11 THOROUGHLY CLEAN DAILY : 1. Disconnect unit from power source, and let cool. 2. Remove, cover or wrap, and refrigerate food. 3. Remove drawer pans and clean separately. The drawer assembly is completely removable. Remove from the cabinet and clean to prevent ...

  • Alto-Shaam 500-2D - page 14

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 12 Food fl avor and aroma are usually so closely related that it is diffi cult, if not impossible, to separate them. There is also an important, inseparable relationship between cleanliness and food fl avor. Cleanliness, top operating effi ciency, and appearan ...

  • Alto-Shaam 500-2D - page 15

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 13 THERMOSTAT ACCURACY The electronic thermostat is a precise instrument and is designed to offer trouble free service. If you suspect the temperature inside the holding compartment does not match the temperature indicated on the digital display, follow the inst ...

  • Alto-Shaam 500-2D - page 16

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 14 TROUBLE SHOOTING - ELECTRONIC CONTROL INSTALLATION Code Description Possible Cause E-10 Cavity air sensor shorted Cavity air sensor reading < 5°F. Verify sensor integrity. See sensor test instructions below. E-11 Cavity air sensor open Cavity air sensor r ...

  • Alto-Shaam 500-2D - page 17

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 15 SERVICE 1 23 4 5 6 27 26 25 22 21 24 10 19 20 16 15 18 17 11 12 13 14 9 7 8 23 SERVICE VIEW - EXTERIOR 500-2D Shown Part numbers and drawings are subject to change without notice. ...

  • Alto-Shaam 500-2D - page 18

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 16 MODEL > 500-1D 500-2D 500-3D ITEM DESCRIPTION PART NO. QTY PART NO. QTY PART NO. QTY 1 TOP COVER 1012473 1 1012473 1 1012473 1 2 REAR TRIM 1012665 1 1012674 1 1012446 1 3 RIVET , BLIND, #44, S/S 28 RI-2100 24 RI-2100 28 RI-2100 30 4 GASKET ADHESIVE 0.125 x ...

  • Alto-Shaam 500-2D - page 19

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 17 SERVICE 3 4 5 1 2 12 11 10 6 13 8 7 9 SERVICE VIEW - DRAWER ASSEMBLY (5013915) 500-D Part numbers and drawings are subject to change without notice. ITEM DESCRIPTION PART NO. QTY 1 WASHER, 1/4" LOCK WS-2294 2 2 NUT 1/4-20 NC ACORN #18-8 S/S NU-2187 2 3 P ...

  • Alto-Shaam 500-2D - page 20

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 18 SERVICE 4 6 5 1 2 11 12 10 17 18 19 20 23 24 25 26 27 28 29 21 22 13 14 15 16 3 9 7 8 SERVICE VIEW - EXTERIOR 500-1DN Shown Part numbers and drawings are subject to change without notice. ...

  • Alto-Shaam 500-2D - page 21

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 19 SERVICE MODEL > 500-1DN 500-2DN 500-3DN ITEM DESCRIPTION PART NO. QTY PART NO. QTY PART NO. QTY 1 TOP COVER 1012779 1 1012779 1 1012779 1 2 GASKET ADHESIVE 0.125 x 0.375 [lin ft] GS-23622 8 GS-23622 8 GS-23622 8 3 BUSHING, STRAIGHT , STRAIN RELIEF BU-3964 ...

  • Alto-Shaam 500-2D - page 22

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 20 SERVICE 7 6 5 9 10 12 14 13 4 1 8 3 2 11 SERVICE VIEW - DRAWER ASSEMBLY (5014435) 500-DN Part numbers and drawings are subject to change without notice. Item #10 must be order ed when installing item #11 ITEM DESCRIPTION PART NO. QTY 1 RAIL, P AN, LEFT -HAND ...

  • Alto-Shaam 500-2D - page 23

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 21 SERVICE 6 5 8 7 4 3 1 2 10 9 SERVICE VIEW - ELECTRICAL Part numbers and drawings are subject to change without notice. ITEM DESCRIPTION PART NO. QTY 1 BUSHING, 3/8" HOLE BU-3419 1 2 ELECTRIC CHASSIS 5014441 1 3 WASHER, INT . LOCK WS-2467 1 4 SCREW , 10-3 ...

  • Alto-Shaam 500-2D - page 24

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 22 ...

  • Alto-Shaam 500-2D - page 25

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 23 ...

  • Alto-Shaam 500-2D - page 26

    MN-29742 • Rev. 1 (04/13) • Drawer Warmer Installation/Operation/Service Manual • 24 ...

  • Alto-Shaam 500-2D - page 27

    TRANSPORTATION DAMAGE and CLAIMS All Alto-Shaam equipment is sold F.O.B. shipping point, and when accepted by the carrier, such shipments become the property of the consignee. Should damage occur in shipment, it is a matter between the carrier and the consignee. In such cases, the carrier is assumed to be responsible for the safe delivery of the me ...

Manufacturer Alto-Shaam Category Food Warmer

Documents that we receive from a manufacturer of a Alto-Shaam 500-2D can be divided into several groups. They are, among others:
- Alto-Shaam technical drawings
- 500-2D manuals
- Alto-Shaam product data sheets
- information booklets
- or energy labels Alto-Shaam 500-2D
All of them are important, but the most important information from the point of view of use of the device are in the user manual Alto-Shaam 500-2D.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Alto-Shaam 500-2D, service manual, brief instructions and user manuals Alto-Shaam 500-2D. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Alto-Shaam 500-2D.

Similar manuals

A complete manual for the device Alto-Shaam 500-2D, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Alto-Shaam 500-2D by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Alto-Shaam 500-2D.

A complete Alto-Shaam manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Alto-Shaam 500-2D - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Alto-Shaam 500-2D, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Alto-Shaam 500-2D, that we can find in the current document
3. Tips how to use the basic functions of the device Alto-Shaam 500-2D - which should help us in our first steps of using Alto-Shaam 500-2D
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Alto-Shaam 500-2D
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Alto-Shaam 500-2D in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Alto-Shaam 500-2D?

Use the form below

If you did not solve your problem by using a manual Alto-Shaam 500-2D, ask a question using the form below. If a user had a similar problem with Alto-Shaam 500-2D it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)