English dropdown-ico

Manual Extron electronics HSA 200S

30 pages 1.74 mb
Download

Go to site of 30

Summary
  • Extron electronics HSA 200S - page 1

    User ’ s Manual © 2008 Extron Electronics. All rights reserved. Hideaway Surface Access Products 68-695-01 Rev . H 08 08 HSA 200S & HSA 200SE HSA 200C & HSA 200CE HSA 222S & HSA 222C ...

  • Extron electronics HSA 200S - page 2

    Precautions This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product's enclosure that may present a risk of electric shock. Caution Read In ...

  • Extron electronics HSA 200S - page 3

    ...

  • Extron electronics HSA 200S - page 4

    iii HSA 200/222 Series • Table of Contents Chapter 1 • Introduction .......................................................... 1-1 About the Hideaway Surface Access Products ....... 1-2 About the Extender board line driver .................................. 1-4 Features ........................................................................... ...

  • Extron electronics HSA 200S - page 5

    iv HSA 200/222 Series • Table of Contents T able of Contents, cont’d HSA 200/222 Series Surface Access Pr oducts 1 Chapter One Introduction About the Hideaway Surface Access Products Features 68-695-01 Rev . H 08 08 All trademarks mentioned in this manual are the properties of their r espective owners. Appendix A • Reference Information ..... ...

  • Extron electronics HSA 200S - page 6

    HSA 200/222 Series • Introduction HSA 200/222 Series • Introduction Introduction 1-2 1-3 About the Hideaway Surface Access Products The Extron Hideaway HSA 200 series and HSA 222 series are furniture-mounted, architectural solutions for inconspicuous computer video and/or network access and control. The HSA 200C (figure 1-1) and HSA 200S (figur ...

  • Extron electronics HSA 200S - page 7

    HSA 200/222 Series • Introduction HSA 200/222 Series • Introduction Introduction 1-4 The installed enclosures fit nearly flush within a table or podium top (figure 1-4), storing the connectors out of the way and out of sight. T o access the connectors, the user presses down on the top of the enclosure, r eleasing a mechanical latch. A gas lift ...

  • Extron electronics HSA 200S - page 8

    HSA 200/222 Series • Introduction Introduction HSA 200/222 Series Surface Access Pr oducts 2 Chapter T wo Installation Installation Overview Preparing the Routing Template Preparing the Table and Mounting the Enclosure Underside Features and Cabling Connections Front Panel Connectors Pre-installation Testing and Troubleshooting (HSA 200CE and HSA ...

  • Extron electronics HSA 200S - page 9

    HSA 200/222 Series • Installation HSA 200/222 Series • Installation Installation 2-3 Preparing the Routing T emplate Extron pr ovides a metal template for each HSA model at no charge . Appendix A lists the HSA 200 and HSA 222 template part numbers. Extron r ecommends using this template as a guide to cut the hole in the table where the HSA will ...

  • Extron electronics HSA 200S - page 10

    HSA 200/222 Series • Installation HSA 200/222 Series • Installation Installation, cont’d 2-5 2-4 Preparing the T a ble and Mounting the Enclosure The preferr ed and recommended method for preparing the table is to use the appropriate Extron r outing template and a router . The templates are available at no cost ; see the part numbers for the ...

  • Extron electronics HSA 200S - page 11

    HSA 200/222 Series • Installation HSA 200/222 Series • Installation Installation, cont’d 2-6 Preparing the table with a hole saw (HSA 200C, HSA 200CE, or HSA 222C— US version only) 1 . Locate the desired mounting location on the tabletop or other installation surface. Mark the 6" circle, then find the center and mark it as well. Wear s ...

  • Extron electronics HSA 200S - page 12

    HSA 200/222 Series • Installation HSA 200/222 Series • Installation Installation, cont’d 2-8 2-9 5 . Snugly tighten the Philips head screws on the scre w clamps to secure the enclosure to the surface. CA UTION Overtightening the Philips head screws on the screw clamps can bend the clamp’ s horizontal flange. 6 . T ighten the locking thumbsc ...

  • Extron electronics HSA 200S - page 13

    HSA 200/222 Series • Installation HSA 200/222 Series • Installation Installation, cont’d All HSA 200 and HSA 222 models 4 Screw clamp bracket/screw clamp — These two brackets/ clamps hold the enclosure firmly in place in the mounting hole. 5 AC power input connection — Connect this cord to the power source. For US-domestic versions, this ...

  • Extron electronics HSA 200S - page 14

    HSA 200/222 Series • Installation HSA 200/222 Series • Installation Installation, cont’d 2-12 Power connector wiring 1 . See figure 2-10. Plug the input connector of the included 100-240 V A C, 50/60Hz, 12 VDC power supply into the AC power outlet on the underside of the enclosure ( 1 on figure 2-5). R AUDI O R L L POWER 9-1 8 VDC MEDIUM peak ...

  • Extron electronics HSA 200S - page 15

    HSA 200/222 Series • Installation HSA 200/222 Series • Installation Installation, cont’d 2-14 The Universal AC outlet is fully compatible with Europlug, British, Indian, Danish, and Italian plug types. See the universal AC outlet guide on the Extron Web site, www .extron.com , for compatibility details on all plug types. 2 Computer video inpu ...

  • Extron electronics HSA 200S - page 16

    HSA 200/222 Series • Installation Installation, cont’d HSA 200/222 Series Surface Access Pr oducts 3 Chapter Thr ee Maintenance and Modifications Removing and Replacing the Enclosure Replacing the Bezels Replacing the Gas Lift Adjusting the Top Panel 2-16 Pre-installation T esting and T roubleshooting (HSA 200CE and HSA 200SE Models Only) Befor ...

  • Extron electronics HSA 200S - page 17

    Maintenance and Modifications HSA 200/222 Series • Maintenance and Modifications HSA 200/222 Series • Maintenance and Modifications 3-2 The most probable corrective maintenance pr ocedures for your HSA 200 or HSA 222 are leveling the top surface and r eplacing the gas lifts. Most of the maintenance procedures r equire removing the surface mount ...

  • Extron electronics HSA 200S - page 18

    HSA 200/222 Series • Maintenance and Modifications HSA 200/222 Series • Maintenance and Modifications Maintenance and Modifications, cont’d 2 . (HSA 222 models only) Remove the four Philips head screws fr om the front access panel (figur e 3-1). Retain the screws. Lift the panel away from the enclosur e. Remove front access panel. Figure 3-1 ...

  • Extron electronics HSA 200S - page 19

    HSA 200/222 Series • Maintenance and Modifications HSA 200/222 Series • Maintenance and Modifications Maintenance and Modifications, cont’d 3-6 4 . Remove the four 1/16" hex head screws on the right and left sides of the front panel (figure 3-3). Retain the scr ews. Lift the panel away from the enclosure. Figure 3-3 shows an HSA 200 mode ...

  • Extron electronics HSA 200S - page 20

    HSA 200/222 Series • Maintenance and Modifications HSA 200/222 Series • Maintenance and Modifications Maintenance and Modifications, cont’d 3-8 Replacing the Gas Lift The gas lift that raises the HSA surface is rated for 100,000 opening and closing cycles. Replace the gas lift as follows: Ensure that AC power is disconnected before servicing ...

  • Extron electronics HSA 200S - page 21

    HSA 200/222 Series • Maintenance and Modifications HSA 200/222 Series • Maintenance and Modifications Maintenance and Modifications, cont’d 3-10 7. (HSA 222 models only) Remove the four Philips head screws fr om the front access panel (figur e 3-7). Retain the screws. Lift the panel away from the enclosur e. Remove front access panel. Figure ...

  • Extron electronics HSA 200S - page 22

    HSA 200/222 Series • Maintenance and Modifications HSA 200/222 Series • Maintenance and Modifications Maintenance and Modifications, cont’d 3-12 Remove pivot nut. Remove gas lift. Figure 3-9 — Replacing the gas lift, HSA 222 model 9 . Insert the piston end of the replacement gas lift thr ough the hole in the bottom of the enclosure adjacent ...

  • Extron electronics HSA 200S - page 23

    HSA 200/222 Series • Maintenance and Modifications Maintenance and Modifications, cont’d HSA 200/222 Series Surface Access Pr oducts A Appendix A Reference Information Specifications HSA Part Numbers Included Parts Routing Templates Replacement Parts Accessories Top Plate Dimensions 3-14 ...

  • Extron electronics HSA 200S - page 24

    HSA 200/222 Series • Reference Information HSA 200/222 Series • Reference Information Reference Information A-3 A-2 Specifications Video — HSA 200SE, HSA 200CE Gain ................................. Selectable: unity (0.7 V), (0.75 V) 50%, (0.8 V) 100% Bandwidth ..................... 300 MHz (-3 dB) ID bits are terminated on pins 4 and 11. Vi ...

  • Extron electronics HSA 200S - page 25

    HSA 200/222 Series • Reference Information HSA 200/222 Series • Reference Information Reference Information, cont’d A-4 General The Universal AC outlet is fully compatible with Europlug, British, Indian, Danish, and Italian plug types. See the Universal AC outlet guide on the Extron Web site, www.extron.com , for compatibility details on all ...

  • Extron electronics HSA 200S - page 26

    HSA 200/222 Series • Reference Information HSA 200/222 Series • Reference Information Reference Information, cont’d HSA 200C/HSA 200CE — international circular models Top plate (outer rim) ................... 8.5" diameter circle (21.6 cm diameter) circle Surface cutout (inside rim) ......... 8.0" diameter (20.3 cm diameter) circl ...

  • Extron electronics HSA 200S - page 27

    HSA 200/222 Series • Reference Information HSA 200/222 Series • Reference Information Reference Information, cont’d A-9 A-8 Included Parts Part Part number HSA 200 and HSA 222 User ’s Manual RJ-45 connector bezel plug-in inserts (assorted colors) 70-201-01 Power supply , 100-240V AC, 50/60Hz, 12VDC (HSA 200SE and HSA 200 CE only) 28-104-01 ...

  • Extron electronics HSA 200S - page 28

    HSA 200/222 Series • Reference Information Reference Information, cont’d HSA 200/222 Series Surface Access Pr oducts B Appendix B Packaging for Shipment A-10 Figure A-2 — HSA 200C/HSA 200CE/HSA 222C cutout dimensions 6.000 0.0325" (15.24 0.083 cm) 6.5" (16.5 cm) 8.0" (20.3 cm) 8.5" (21.6 cm) SURF ACE CUT -OUT AREA = 6.000 ...

  • Extron electronics HSA 200S - page 29

    HSA 200/222 Series • Packaging for Shipment HSA 200/222 Series • Packaging for Shipment Packaging for Shipment 2 . Disconnect all cables and remove the HSA 200 or HSA 222 from the table or desk. See Removing and Replacing the Enclosure , steps 1 through 4 , in chapter 3, Maintenance and Modifications . 3 . Place the enclosure on a flat, horizon ...

  • Extron electronics HSA 200S - page 30

    HSA 200/222 Series • Packaging for Shipment Packaging for Shipment , cont’d B-4 6 . Place the remaining foam shell on the other side of the HSA (figure B-4). Firmly push the foam shells together as far as they will go to completely suspend the HSA unit. Figure B-4 — HSA unit suspended in the foam 7 . Place the foam-protected HSA 200 or HSA 22 ...

Manufacturer Extron electronics Category Network Card

Documents that we receive from a manufacturer of a Extron electronics HSA 200S can be divided into several groups. They are, among others:
- Extron electronics technical drawings
- HSA 200S manuals
- Extron electronics product data sheets
- information booklets
- or energy labels Extron electronics HSA 200S
All of them are important, but the most important information from the point of view of use of the device are in the user manual Extron electronics HSA 200S.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Extron electronics HSA 200S, service manual, brief instructions and user manuals Extron electronics HSA 200S. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Extron electronics HSA 200S.

Similar manuals

A complete manual for the device Extron electronics HSA 200S, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Extron electronics HSA 200S by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Extron electronics HSA 200S.

A complete Extron electronics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Extron electronics HSA 200S - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Extron electronics HSA 200S, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Extron electronics HSA 200S, that we can find in the current document
3. Tips how to use the basic functions of the device Extron electronics HSA 200S - which should help us in our first steps of using Extron electronics HSA 200S
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Extron electronics HSA 200S
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Extron electronics HSA 200S in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Extron electronics HSA 200S?

Use the form below

If you did not solve your problem by using a manual Extron electronics HSA 200S, ask a question using the form below. If a user had a similar problem with Extron electronics HSA 200S it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)