English dropdown-ico

Manual Kenwood KDC-BT51U

59 pages 1.93 mb
Download

Go to site of 59

Summary
  • Kenwood KDC-BT51U - page 1

    Before reading this manual, click the button below to check the latest edition and the modified pages. IM327_Ref_E_en_01 © 2010 Kenwood Corporation All Rights Reser ved . KDC-B T51U KDC-5751SD KDC-5051U CD-RECEIVER INSTRUCTION MANU AL Check the latest edition ...

  • Kenwood KDC-BT51U - page 2

    2 | KDC-BT51U/ KDC-5751SD/ KDC-5051U Con tents Before use 4 Component names 6 F unction setting 6 F unction setting operation Audio adjustments 7 Audio control Audio preset Memor y Audio preset recall iPod contr ol operation 9 Music search Alphabet search Related search Direct search Skip search Skip search ratio setting Play mode Registering a son ...

  • Kenwood KDC-BT51U - page 3

    English | 3 ...

  • Kenwood KDC-BT51U - page 4

    4 | KDC-BT51U/ KDC-5751SD/ KDC-5051U Before use Before using this unit for the first time This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the Demonstration mode. Refer to <Exit Demonstration Mode> (page 4) of Quick star t guide. 2 W ARNING T o prevent injury or fire, take the following pre ...

  • Kenwood KDC-BT51U - page 5

    English | 5 ...

  • Kenwood KDC-BT51U - page 6

    6 | KDC-BT51U/ KDC-5751SD/ KDC-5051U F unction setting Function setting operation Pref erences of this unit can be set in the Function setting mode. For detailed setting procedure and items, refer to the explanation for each source function.  Select the source Press the [SRC ] button. Switch to the source to display the items to set.  Enter F ...

  • Kenwood KDC-BT51U - page 7

    English | 7 Audio a djustments ⁄ • Y ou can set Bass, M iddle, and T reble for each source. About Supreme T echnology to extrapolate and supplement with proprietar y algorithm, the high-frequency range that is cut off when encoding at low bit rate (less than 128K bps, Sampling frequency is 44.1kHz). Supplementing is optimized by compression for ...

  • Kenwood KDC-BT51U - page 8

    8 | KDC-BT51U/ KDC-5751SD/ KDC-5051U Audio a djustments Audio preset recall Recalling the sound setup registered by <Audio preset Memor y> (page 8) .  Select the source Press the [SRC] button.  Enter Audio control mode Press the Control knob.  Select Audio preset memor y mode The item can be selected and determined as follows . “De ...

  • Kenwood KDC-BT51U - page 9

    English | 9 Music search Searching for the song you want to play .  Enter Music search mode Press the [ ] button. “MUSICSEARCH” is displayed.  Search for music Operation type Opera tion Movement between items T urn the Contr ol knob. Move to the Alphabet search mode Press the [ ] button for at least 1 second. Refer to <Alphabet search& ...

  • Kenwood KDC-BT51U - page 10

    10 | KDC-BT51U/ KDC-5751SD/ KDC-5051U iPod c ontrol operation Related search Browsing for music of the same ar tist or genre as the one being played.  Enter Search selec t mode Press the [ ] button for at least 1 second.  Select Related search mode T urn the Control knob to selec t “Related Search ” , and then press the Control knob.  ...

  • Kenwood KDC-BT51U - page 11

    English | 11 Skip search The number of songs to be skipped is determined by the ratio of the total number of songs in the list which is selected.  Enter Music search mode Press the [ ] button. “MUSICSEARCH” is displayed.  Enter Search selec t mode Press the [ ] button.  Select Skip search mode T urn the Control knob to selec t “Skip ...

  • Kenwood KDC-BT51U - page 12

    12 | KDC-BT51U/ KDC-5751SD/ KDC-5051U iPod c ontrol operation Registering a song in the playlist Y ou can register your favorite songs to make a playlist. Y ou can register up to ten songs in the playlist.  Play the song you want to register Push the Control k nob towards up, down, right, and lef t.  Enter Search selec t mode Press the [ ] bu ...

  • Kenwood KDC-BT51U - page 13

    English | 13 Playing the playlist  Enter Search selec t mode Press the [ ] button for at least 1 second.  Select Recall playlist mode T urn the Control knob to selec t “Recall My Playlist” , and then press the Control k nob.  Play a song in the playlist T urn the Control knob to selec t the song you want to play, and then press the Con ...

  • Kenwood KDC-BT51U - page 14

    14 | KDC-BT51U/ KDC-5751SD/ KDC-5051U Music disc/ Audio file ( CD , U SB, or SD ) O peration Music search Selecting the music you want to listen to from the device or media being played now .  Enter Music search mode Press the [ ] button. “MUSICSEARCH” is displayed.  Search for music Audio file Operation type Operation Movement between fo ...

  • Kenwood KDC-BT51U - page 15

    English | 15 Play mode Y ou can selec t a Play Mode, such as Random play and Repeat play .  Select CD/ USB/ SD source Press the [SRC ] button. Select the “CD ” , “USB” , or “SD” display .  Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd.  Select the Play func tion mode T urn the Control knob to sel ...

  • Kenwood KDC-BT51U - page 16

    16 | KDC-BT51U/ KDC-5751SD/ KDC-5051U T uner Op eration Auto memory Memorizes 18 (FM)/ 6 (AM) stations with good reception automatically .  Select T uner source Press the [SRC ] button. Select the “ TUNER” display.  Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd.  Select the Auto memor y mode The item can ...

  • Kenwood KDC-BT51U - page 17

    English | 17  Exit Function setting mode Press the [ ] button for at least 1 second. T uner setting Sets the tuner items.  Select T uner source Press the [SRC ] button. Select the “ TUNER” display.  Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd.  Select the Setting mode T urn the Control knob to selec ...

  • Kenwood KDC-BT51U - page 18

    18 | KDC-BT51U/ KDC-5751SD/ KDC-5051U T uner Op eration PTY (Program T yp e) Selecting the Program T ype below and searching for a station; Program T ype Display Speech “Speech” Music “Music” News “News” Curr ent Affairs “ Affairs ” Information “Info ” Sport “Spor t” Educa tion “Educat e ” Drama “Drama ” Cultur e “ ...

  • Kenwood KDC-BT51U - page 19

    English | 19 Changing Language for PTY Function Selecting the Program T ype display language as follows; Language Display English “English ” Fr ench “Fr ench ” German “German ”  Enter PTY mode Press the [ ] button twice.  Enter Changing L anguage mode Press the Con trol k nob.  Select the language T urn the Control knob to sele ...

  • Kenwood KDC-BT51U - page 20

    20 | KDC-BT51U/ KDC-5751SD/ KDC-5051U Log memory Log memor y item lock Locks Log memor y items to avoid them being deleted.  Display the Log memory list Press the [LOG] button.  Lock the Log memory item T urn the Control knob to selec t item, and then press the Control knob for at least 1 second. Locked items are indicated with “ ” .  ...

  • Kenwood KDC-BT51U - page 21

    English | 21 Deleting a Log memory item Deletes Log memor y items.  Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd.  Select the Log delete mode The item can be selected and determined as follows . “Settings” > “Log ” > “L og Delete” T o select the item, turn the Control knob. T o determine the ...

  • Kenwood KDC-BT51U - page 22

    22 | KDC-BT51U/ KDC-5751SD/ KDC-5051U Log memory T uner log memory time setting Y ou can set the timing to log the station by the reception time.  Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd.  Select the T uner log time set mode The item can be selected and determined as follows . “Settings” > “Log ? ...

  • Kenwood KDC-BT51U - page 23

    English | 23 ...

  • Kenwood KDC-BT51U - page 24

    24 | KDC-BT51U/ KDC-5751SD/ KDC-5051U Displa y settings Selecting text display Changes displayed information on each of the following sources: In T uner source Information Display Fr equency & Program Service name (FM) “Frequency/PS” Song title † (FM)* “Song T itle ” Artist name † (FM)* “ Ar tist Name” Title & Ar tist name ? ...

  • Kenwood KDC-BT51U - page 25

    English | 25 In Bluetooth Audio “BT AUDIO EXT” (Optional accessory K CA-BT200, K CA-BT300) source Information Display Source name “Source Name ” Spectrum analyzer & Clock “Speana/Clock” Date “Da te ” Title & Ar tist name (KCA-BT300 only) “Title/Artist” Album & Ar tist name (KCA-BT300 only) “ Album/Ar tist” Blank ...

  • Kenwood KDC-BT51U - page 26

    26 | KDC-BT51U/ KDC-5751SD/ KDC-5051U Displa y settings Illumination color selec tion Selecting the I llumination Color of the panel.  Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd.  Select Color select mode The item can be selected and determined as follows . “Settings” > “DISP&ILL UMI” > “ ...

  • Kenwood KDC-BT51U - page 27

    English | 27 “ILL UMI Dimmer” Reduces the key Illumination brightness. “ Auto” : D ims the illumination in conjunction with the Light switch of the vehicle. “Manual1” : D ims the illumination constantly . “Manual2” : D ims the illumination darker than Manual1. “OFF” : D oes not dim the illumination. “ILL UMI Effect” Sets whe ...

  • Kenwood KDC-BT51U - page 28

    28 | KDC-BT51U/ KDC-5751SD/ KDC-5051U General operation Adjusting the Clock  Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd.  Select the Clock Adjust mode The item can be selected and determined as follows . “Settings” > “Clock&Da te ” > “ Clock Adjust” T o select the item, turn the Control ...

  • Kenwood KDC-BT51U - page 29

    English | 29 Dual clock display Sets time for two different cities.  Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd.  Select the City Selec t mode The item can be selected and determined as follows . “Settings” > “Clock&Da te ” > “ City Select ” T o select the item, turn the Control knob. T ...

  • Kenwood KDC-BT51U - page 30

    30 | KDC-BT51U/ KDC-5751SD/ KDC-5051U General operation Auxiliary input display setting Sets the display when switched to AUX source.  Select the AUX source Press the [SRC ] button. Select the “ AUX” display.  Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd.  Select the Name set mode The item can be select ...

  • Kenwood KDC-BT51U - page 31

    English | 31 Initial setting Configures initial settings of this unit.  Select Standby Press the [SRC ] button. Select the “ST ANDBY” display.  Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd.  Select the Initial setting mode T urn the Control knob to selec t “Initial Settings” , and then press the Con ...

  • Kenwood KDC-BT51U - page 32

    32 | KDC-BT51U/ KDC-5751SD/ KDC-5051U General operation Demonstration mode S etting T urning the demonstration mode ON/OFF .  Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd.  Select the Demonstration mode T urn the Control knob to selec t “DEMO Mode” , and then press the Control knob.  Set the Demonstrati ...

  • Kenwood KDC-BT51U - page 33

    English | 33 ...

  • Kenwood KDC-BT51U - page 34

    34 | KDC-BT51U/ KDC-5751SD/ KDC-5051U Operation of hands-f ree phoning Before use KDC-BT51U • I f your cell-phone is not yet registered, register (pair) it by referring to <R egistering cell-phone> (page 9) in the Quick Star t Guide or <Registering cell-phone> (page 34) in this document. • T o register a new cell-phone, you can also ...

  • Kenwood KDC-BT51U - page 35

    English | 35 Receiving a call Answering a phone call KDC-BT51U Press the [ ] button. KDC-5751SD KDC-5051U Press the Control knob. ⁄ • The following operations disconnec t the line: - I nsering a CD. - Connecting a USB device. • The name of the calling par ty is displayed if it has already been registered in the Phone Book . Rejecting an incom ...

  • Kenwood KDC-BT51U - page 36

    36 | KDC-BT51U/ KDC-5751SD/ KDC-5051U Calling a number in the call log  Enter Bluetooth mode KDC-BT51U Press the [ ] button. KDC-5751SD KDC-5051U Press the [LOG] button for at least 1 second. “BT MODE” is displayed.  Select the c all log mode T urn the Control knob to selec t “Incoming Calls” , “ Outgoing Calls” , or “Missed Cal ...

  • Kenwood KDC-BT51U - page 37

    English | 37 Speed dialing (Preset dial)  Enter Bluetooth mode KDC-BT51U Press the [ ] button. KDC-5751SD KDC-5051U Press the [LOG] button for at least 1 second. “BT MODE” is displayed.  Select the Preset dial mode T urn the Control knob to selec t “Pr eset Call” , and then press the Control knob.  Select the number you want to rec ...

  • Kenwood KDC-BT51U - page 38

    38 | KDC-BT51U/ KDC-5751SD/ KDC-5051U During a call Disconnecting a Call Press the [SRC ] button. Switching to the Privat e mode Push the Control k nob towards right or left. Switches between Private talk (“PRIV A TE”) and Hands-free talk each time this button is pressed. ⁄ • Depending on the type of your cell-phone, switching to the privat ...

  • Kenwood KDC-BT51U - page 39

    English | 39 Making a voice dialing call  Enter Bluetooth mode KDC-BT51U Press the [ ] button. KDC-5751SD KDC-5051U Press the [LOG] button for at least 1 second. “BT MODE” is displayed.  Enter voice recognize mode T urn the Control knob to selec t “V oice Recognize ” , and then press the Control knob.  Hav e the unit recognize your ...

  • Kenwood KDC-BT51U - page 40

    40 | KDC-BT51U/ KDC-5751SD/ KDC-5051U Display s of phone number type (category) The category items in the Phone Book are displayed as follows: Display Information “ General” / General “ Home” / Home “ Office ” / Office “ Mobile” / Mobile “ Other” / Other Operation of hands-f ree phoning F unction of KDC-BT51U, KCA-BT300/BT200 (O ...

  • Kenwood KDC-BT51U - page 41

    English | 41 ...

  • Kenwood KDC-BT51U - page 42

    42 | KDC-BT51U/ KDC-5751SD/ KDC-5051U Bluetooth audio opera tion Before Use • Y ou need to register your Bluetooth audio player before using it with this unit. For more details, see <Registering Bluetooth device> (page 44) . • Y ou need to selec t the Bluetooth audio player you wish to connect. Refer to <S electing the Bluetooth device ...

  • Kenwood KDC-BT51U - page 43

    English | 43 ...

  • Kenwood KDC-BT51U - page 44

    44 | KDC-BT51U/ KDC-5751SD/ KDC-5051U Bluetooth setup Registering Bluetooth device T o make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pair ing). Y ou can register up to five Bluetooth devices to this unit. When registering from Bluetooth devices  T urn on the this unit.  Start registering a unit by ope ...

  • Kenwood KDC-BT51U - page 45

    English | 45 Registering Special bluetooth device Allow registration of a special device that cannot be register ed normally (pairing).  Enter Bluetooth mode KDC-BT51U Press the [ ] button. KDC-5751SD KDC-5051U Press the [LOG] button for at least 1 second. “BT MODE” is displayed.  Enter Function setting mode Press the Con trol k nob fo r ...

  • Kenwood KDC-BT51U - page 46

    46 | KDC-BT51U/ KDC-5751SD/ KDC-5051U Downloading the Phone b ook Download the phone book data from the cell- phone to this unit so that you can use the Phone Book of this unit. Downloading automatically If the cell-phone suppor ts a phone book synchronization function, the phone book is downloaded automatically after Bluetooth connection. ⁄ • ...

  • Kenwood KDC-BT51U - page 47

    English | 47 Deleting a registered Bluetooth device Y ou can delete a registered Bluetooth device.  Enter Bluetooth mode KDC-BT51U Press the [ ] button. KDC-5751SD KDC-5051U Press the [LOG] button for at least 1 second. “BT MODE” is displayed.  Enter Function setting mode Press the Con trol k nob fo r at le ast 1 seco nd.  Select Bluet ...

  • Kenwood KDC-BT51U - page 48

    48 | KDC-BT51U/ KDC-5751SD/ KDC-5051U Adding a voice dialing command Add a voice tag to the phonebook for voice dialing. Y ou can register up to 35 voice tags.  Enter Bluetooth mode KDC-BT51U Press the [ ] button. KDC-5751SD KDC-5051U Press the [LOG] button for at least 1 second. “BT MODE” is displayed.  Enter Function setting mode Press ...

  • Kenwood KDC-BT51U - page 49

    English | 49 Setting a voice command for category Add a voice tag to the phone number category (type) for voice calling.  Enter Bluetooth mode KDC-BT51U Press the [ ] button. KDC-5751SD KDC-5051U Press the [LOG] button for at least 1 second. “BT MODE” is displayed.  Enter Function setting mode Press the Con trol k nob fo r at le ast 1 sec ...

  • Kenwood KDC-BT51U - page 50

    50 | KDC-BT51U/ KDC-5751SD/ KDC-5051U Bluetooth setup F unction of KDC-BT51U, KCA-BT300/BT200 (Optional Accessory) Bluetooth detail setting Configures initial settings of this unit.  Enter Bluetooth mode KDC-BT51U Press the [ ] button. KDC-5751SD KDC-5051U Press the [LOG] button for at least 1 second. “BT MODE” is displayed.  Enter Functi ...

  • Kenwood KDC-BT51U - page 51

    English | 51 SMS ( S hort Message Ser vice ) F unction of KDC-BT51U, KCA-BT300/BT200 (Optional Accessory) Displaying the SMS The SMS received by at the cell-phone is displayed on the receiver . A newly received message is displayed. ¤ • T o prevent car accidents, the dr iver should not read the SMS while driving. When a new message arrives “SM ...

  • Kenwood KDC-BT51U - page 52

    52 | KDC-BT51U/ KDC-5751SD/ KDC-5051U Appendix About Audio file • Playable Audio file AAC-L C (.m4a), MP3 (.mp3), WMA (.wma) • Playable disc media CD-R/R W/ROM • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. • Playable USB device USB mass storage class • Playable USB device and SD card file system F A T16, F ...

  • Kenwood KDC-BT51U - page 53

    English | 53 About “KENWOOD Music Editor ” • This unit suppor ts the PC application “KENWOOD Music Editor Light ver1.1” or later. • When you use the audio file with database information added by the “KENWOOD Music Editor Light ver1.1” , you can search a file by title, album or artist name using the <Music search> (page 14) . ? ...

  • Kenwood KDC-BT51U - page 54

    54 | KDC-BT51U/ KDC-5751SD/ KDC-5051U T roubleshooting guide Some func tions of this unit may be disabled by some settings made on this unit. ! • Cannot set up Display . ▲ <Demonstration mode Setting> (page 32) is not set to Of f. ! • Can no t se t up “Text Se le ct ” , “Side S el ec t ” , a nd “Sta tus” of “Disp lay Sel e ...

  • Kenwood KDC-BT51U - page 55

    English | 55 No Music Data/Error 15: • The connected USB device contains no playable audio file. • Media was played that does not have data recorded that the unit can play. USB ERROR: Some trouble may have occurred to the connected USB device.  Remove the USB device, then c ycle the power switch to ON. I f the same display is repeated, use a ...

  • Kenwood KDC-BT51U - page 56

    56 | KDC-BT51U/ KDC-5751SD/ KDC-5051U FM tuner sec tion Fr equency range (50 kHz step) : 87.5 MH z – 108.0 MHz Usable sensitivit y (S/N = 26dB) : 1 μV/75 Ω Quieting Sensitivit y (S/N = 46dB) : 2.5 μV/75 Ω Fr equency response (±3.0 dB) : 30 H z – 15 kH z Signal to Noise ratio (MONO) : 63 dB Stereo separation (1 kHz) : 40 dB MW tuner secti ...

  • Kenwood KDC-BT51U - page 57

    English | 57 Specifications subject to change without notice. Auxiliary input Fr equency response (±3 dB) : 20 H z – 20 kH z Input Maximum Voltage : 1200 mV Input Impedance : 10 kΩ General Operating voltage KDC-BT51U : 14.4 V (10.5 – 16V allowable) KDC-5751SD/ KDC-5051U : 14.4 V (11 – 16V allowable) Maximum Current consumption : 10 A Insta ...

  • Kenwood KDC-BT51U - page 58

    This Product is not installed by the manufac turer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU M ember State. Information on Disposal of Old Elec trical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems) Products and batteries wit ...

  • Kenwood KDC-BT51U - page 59

    Magyar • Alulírott , Kenwood, kijelenti, hogy a jelen KDC-BT51U megfelel az 1999/5/EC irányelvben meghatár oz ott alapvető köv etelményeknek és egyéb vonatko zó előírásoknak. Svenska • Härmed intygar Kenwood att denna KDC-BT51U stär l överensstämelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framg? ...

Manufacturer Kenwood Category Car Stereo System

Documents that we receive from a manufacturer of a Kenwood KDC-BT51U can be divided into several groups. They are, among others:
- Kenwood technical drawings
- KDC-BT51U manuals
- Kenwood product data sheets
- information booklets
- or energy labels Kenwood KDC-BT51U
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kenwood KDC-BT51U.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kenwood KDC-BT51U, service manual, brief instructions and user manuals Kenwood KDC-BT51U. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kenwood KDC-BT51U.

Similar manuals

A complete manual for the device Kenwood KDC-BT51U, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kenwood KDC-BT51U by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kenwood KDC-BT51U.

A complete Kenwood manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kenwood KDC-BT51U - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kenwood KDC-BT51U, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kenwood KDC-BT51U, that we can find in the current document
3. Tips how to use the basic functions of the device Kenwood KDC-BT51U - which should help us in our first steps of using Kenwood KDC-BT51U
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kenwood KDC-BT51U
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kenwood KDC-BT51U in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kenwood KDC-BT51U?

Use the form below

If you did not solve your problem by using a manual Kenwood KDC-BT51U, ask a question using the form below. If a user had a similar problem with Kenwood KDC-BT51U it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)