English dropdown-ico

Manual Transition Networks SCSCF30XX-10X

7 pages 0.63 mb
Download

Go to site of 7

Summary
  • Transition Networks SCSCF30XX-10X - page 1

    * Typical maximum cable distance. Actual distance is dependent upon the physical characteristics of the network. Part Number Port One - Copper Port Two - Duplex Fiber-Optic SCSCF3011-100 75 ohm coax (BNC) ST, 1300 nm multimode 2 km (1.2 miles)* SCSCF3013-100 75 ohm coax (BNC) SC, 1300 nm multimode 2 km ( 1.2 miles)* SCSCF3014-100 75 ohm coax (BNC) ...

  • Transition Networks SCSCF30XX-10X - page 2

    2 SCSCF30xx-10x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Part Number Port One - Copper Port Two - Single Fiber Optic SCSCF3029-102 and -103 are intended to be installed in the same network where one is the local converter and the other is the remote converter. *Typical maximum cable distance. Actual distance is ...

  • Transition Networks SCSCF30XX-10X - page 3

    4 SCSCF30xx-10x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued CAUTION: Wear a grounding device and observe electrostatic discharge precautions when setting the jumper. Failure to observe this caution could result in damage to, and subsequent failure of, the Device. Set the Coax Gr ounding Ju ...

  • Transition Networks SCSCF30XX-10X - page 4

    SCSCF30xx-10x 6 Operation After installation, the Device should function without operator intervention. Use the status LEDs to monitor the Device operation in the network. SDC Green on The coax link is up. Green flashing The coax link is in loop-back mode. Yellow on AIS (Alarm Indication Signal) on the coax link. SDF Green on The fiber link is up. ...

  • Transition Networks SCSCF30XX-10X - page 5

    8 SCSCF30xx-10x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Cable Specif ications -- Continued SCSCF3029-102 1310 nm (TX) / 1550 nm (RX) simplex SCSCF3029-103 1550 nm (TX) / 1310 nm (RX) simplex Fiber-optic Transmitter Power: min: -8.0 dBm max: -3.0 dBm Fiber-optic Receiver Sensitivity: min: -33.0 dBm max: -3.0 dBm ...

  • Transition Networks SCSCF30XX-10X - page 6

    10 SCSCF30xx-10x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 6. Is Data Transfer Failing? YES • Verify the local copper connection by starting a local copper loop-back (set the loop-back switch on the local Device to “CL”) and then use a bit error test unit at the local location to run a bit error test. • V ...

  • Transition Networks SCSCF30XX-10X - page 7

    Trademark Notice All trademarks and registered trademarks are the property of their respective owners. Copyright Restrictions © 2001, 2004 Transition Networks. All rights reserved. No part of this work may be reproduced or used in any form or by any means - graphic, electronic, or mechanical - without written permission from Transition Networks. P ...

Manufacturer Transition Networks Category Network Cables

Documents that we receive from a manufacturer of a Transition Networks SCSCF30XX-10X can be divided into several groups. They are, among others:
- Transition Networks technical drawings
- SCSCF30XX-10X manuals
- Transition Networks product data sheets
- information booklets
- or energy labels Transition Networks SCSCF30XX-10X
All of them are important, but the most important information from the point of view of use of the device are in the user manual Transition Networks SCSCF30XX-10X.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Transition Networks SCSCF30XX-10X, service manual, brief instructions and user manuals Transition Networks SCSCF30XX-10X. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Transition Networks SCSCF30XX-10X.

Similar manuals

A complete manual for the device Transition Networks SCSCF30XX-10X, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Transition Networks SCSCF30XX-10X by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Transition Networks SCSCF30XX-10X.

A complete Transition Networks manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Transition Networks SCSCF30XX-10X - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Transition Networks SCSCF30XX-10X, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Transition Networks SCSCF30XX-10X, that we can find in the current document
3. Tips how to use the basic functions of the device Transition Networks SCSCF30XX-10X - which should help us in our first steps of using Transition Networks SCSCF30XX-10X
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Transition Networks SCSCF30XX-10X
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Transition Networks SCSCF30XX-10X in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Transition Networks SCSCF30XX-10X?

Use the form below

If you did not solve your problem by using a manual Transition Networks SCSCF30XX-10X, ask a question using the form below. If a user had a similar problem with Transition Networks SCSCF30XX-10X it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)