-
D-Link DES-1316 - page 1
D - Link DES - 1316 Web - Smart 8 - Port 10/100Mbps Ethernet Switch with 8 10/100Mbps 802.3af Power Over Ethernet Ports Manual First edition Building Networks for People ...
-
D-Link DES-1316 - page 2
2 FCC Warning This equipment has been tested and found to comply with the limits for a C lass A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radi ...
-
D-Link DES-1316 - page 3
3 Il presente prodotto appartiene alla classe A. Se utilizzato in ambiente domestico il prodotto può causare interferenze radio, nel cui caso è possibile che l`utente debba assumere provvediment i adeguati. VCCI Warning BSMI Warning ...
-
D-Link DES-1316 - page 4
4 TABLE OF CONTENTS About This Guide ........................................................................................... 6 Purpose ........................................................................................................ 6 Terms/Usage ............................................................................................ ...
-
D-Link DES-1316 - page 5
5 Configuration ................................................................................................ 18 Installing the Web Management Utility ............................................... 18 Discovery List .......................................................................................... 20 Monitor List ....................... ...
-
D-Link DES-1316 - page 6
6 ABOUT THIS GUIDE Congratulations on your purchase of the 8 - Port 10/100Mbps Ethernet Web Smart Switch with 8 - Port PoE . This Switch integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilitie s in a highly flexible package. Since this S witch ’ s Port - 1 to Port - 8 are Power over Ethernet (PoE) ports, it will automatically det ...
-
D-Link DES-1316 - page 7
7 INTRODUCTION This chapter describes the features of the Web Smart Switch and some background information about Ethernet/Fast Ethernet switching technology. Fast Ethernet Technology The growing importance of LANs and the increasing complexity of desktop computing applications are fueling the need for high performance networks. A number of high - s ...
-
D-Link DES-1316 - page 8
8 transmitting among connected Ethernet or Fast E thernet LAN segments. Switching is a cost - effective way of increasing the total network capacity available to users on a local area network. A switch increases capacity and decreases network loading by dividing a local area network into different segments , which do not compete with each other for ...
-
D-Link DES-1316 - page 9
9 Cost Reduction : A VLAN can be used to create multiple broadcast domains, thus eliminating the need of expensive routers. 802.1Q VLAN : The VLAN tagging option is a standard set by the IEEE to facilitate the spanning of VLANs across multiple switches. (Reference: IEEE Std 802.1Q - 1998 Virtual Bridged Local Area Networks.) Power over Ethernet (Po ...
-
D-Link DES-1316 - page 10
10 u Wire speed reception and transmission u Store - and - Forward switching scheme capability to support rate adaptation and ensure data integrity u Up to 4 K unicast address es entities per device, self - learning, and table aging u 512 KBytes packet buffer u Supports IEEE 802.3x flow control for full - duplex mode ports u Supports Back - pressur ...
-
D-Link DES-1316 - page 11
11 UNPACKING AND INSTAL LATION This cha pter provides unpacking and installation information f or the Switch. Unpacking Open the shipping cartons of the Switch and carefully unpacks its contents. The carton should contain the following items: One 8 - Port 10/100Mbps Ethernet Web Smart Switch with 8 - Port PoE One AC power cord, suitable for your ar ...
-
D-Link DES-1316 - page 12
12 Leave at least 10cm of space at the front and rear of the Switch for ve n tilation. Install the Switch on a sturdy, level surface that can support its weight, or in an EIA standard - size equipment rack. For i n formation on rack installation , see the next section, titled Rack Mounting . When installin g the Switch on a level surface, attach th ...
-
D-Link DES-1316 - page 13
13 Connecting Network Cable s The Switch support s 16 10/100M bps Ethernet ports and Port s 1 ~ 8 are PoE Enable d ports . T hese PoE p ort s will be automatically activated when a compatible terminal is identified. T he Switch will supply power through the Ethernet port to the connected PoE device. F or Legacy devices that are not yet compatible , ...
-
D-Link DES-1316 - page 14
14 IDENTIFYING EXTERNAL COMPONENTS This chapter describes the front panel, rear panel, and LED indicators of the Switch. Front Panel The figure below shows the front panels of the S witch. Figure 3. F ront panel of 8 - port 10/100 Ethernet Switch with 8 - port PoE . LED Indicator : Comprehensive LED indicators display the status of the Switch and t ...
-
D-Link DES-1316 - page 15
15 Ethernet Ports ( Port 9~16 ) : These ports support network speeds of either 10Mbps or 100Mbps, and can operate in half - and full - duplex transfer modes. These ports also support the automatic MDI/MDIX crossover detection function, providing true “plu g and play” capability. Just plug - in the network cable to the Switch directly regardless ...
-
D-Link DES-1316 - page 16
16 UNDERSTANDING LED IN DICATORS The front panel LEDs provide instant status feedback, and helps monitor and troubleshoot when needed. Figure 5. LED indicators of the Switch Po wer and CPU LEDs P O W E R : Power Indicator On : When the Power LED lights on, the Switch is receiving power. Off : When the Power turns off or the power cord has improper ...
-
D-Link DES-1316 - page 17
17 100M bps On : When the 100Mbps LED lights on, the respective port is connected to a 100Mbps Fast Ethernet network. Off : When the respective port is connected to a 10Mbps Ethernet network . PoE Status Green : When the PoE device is connected and the port supplies power successfully. Red : When the PoE port ha s the following failure s : ü PoE p ...
-
D-Link DES-1316 - page 18
18 CONFIGUR ATION Through the Web b rowser you can configure Switch functions such as VLAN, Trunking, and QoS … etc . With the attached Web Management Utility, you can easily discover all the Web Managed Switch es , assign IP Address es , change the password s, and upgrad e new firmware. Installing the Web Management Utili ty The following instru ...
-
D-Link DES-1316 - page 19
19 Figure 6. Web M anagement Utility The Web Management Utility is divided into four parts, Discovery List , Monitor List , Device Setting , and Toolbar function , for detail ed instruction s , follow the section below . ...
-
D-Link DES-1316 - page 20
20 Discovery List This is the list where you can discover all the Web managed devices in the entire network. By pressing the “ Discovery ” button, you can list all the Web Managed devices in the discovery list. Double click or press the “ Add to monitor list ” button to select a device from the Discovery List to the Monitor List. System wor ...
-
D-Link DES-1316 - page 21
21 l S: Shows the system symbol of the Web - Smart device, represent s a device system that is not alive. l IP Address: Shows the current IP address of the device. l MAC Address: Shows the device MAC Address. l Protocol version: Shows the version of the Utility protocol. l Product Name: Shows the device product name. l System Name: Shows the appoin ...
-
D-Link DES-1316 - page 22
22 Figure 8. Note: In order to receive Trap information, the S witch has to be configured with Trap IP and Trap Events in t he Web browser . These settings are available in the Trap Setting Menu (see Page 40 for detail). Add Item: To add a device to the Monitor List manually , enter the IP Address of the device that you want to monitor . Delete Ite ...
-
D-Link DES-1316 - page 23
23 Select the device in the Discovery list or Monitor List and p ress this button , then the Configuration Setting window will pop up (Figure 9 ). A fter fill ing in the data that you want to change , you must fill in the password and press the “ Set ” button to process the data change immediately. Figure 9 . Configuration Setting Password Chan ...
-
D-Link DES-1316 - page 24
24 Firmware Upgrade: When the device has a new function, there will be a new firmware to update the device ; use this function to up grade the firmware . Figure 11. Web Access: Double click the device in th e Monitor List or select a device in the Monitor List and press th e “ Web Access ” button to access the device in Web browser. ...
-
D-Link DES-1316 - page 25
25 Toolbar The toolbar in the Web Management Utility ha s four main tabs : File, View, Options , and Help. In the “File TAB” , there is M onitor Save, Monitor Save As , Monitor Load, and Exit . Monitor Save: To record the setting s of the Monitor List to the default settings so that when you open the Web Management Utility the next time, it wil ...
-
D-Link DES-1316 - page 26
26 Configurin g the Switch The 8 - Port 10/100Mbps Ethernet Web Smart Switch with 8 - Port PoE has a Web GUI interface for smart switch configuration. The Switch can be configured through the Web Browser . A network administrator can manage, control, and monitor the Switch f rom the local LAN . This section indicates how to configure the Switch to ...
-
D-Link DES-1316 - page 27
27 Figure 12. Or through the Web Management Utility, you do not need to remember the IP Address . S elect the device shown in the Monitor List of the Web Management Util ity to settle the device on the Web Browser. When the following dialog page appears, enter the default password "admin" and press Login to enter the main configuration wi ...
-
D-Link DES-1316 - page 28
28 Figure 14. Device Status ...
-
D-Link DES-1316 - page 29
29 Setup Menu When t he m ain page appe ars , f ind the Setup menu on the left side of the screen (Figure 15) . Click on the setup item that you want to configure . There are 12 options: Port Settings, VLAN Settings, Trunk Settings, Mirror Settings, PoE Settings, Device Status, Statistic s , System Settings, Trap Setting s , Password Settings, Back ...
-
D-Link DES-1316 - page 30
30 Configuring Setup Se tting s There are six items , including Port Settings, VLAN Settings, Trunk Settings, Mirror Settings, and PoE Settings in Setup menu . Port Settings In the Port Settings menu (Figure 16) , this page will display each port’s status . P ress the ID parameter to s et each port ’ s S peed , Flow Control , and QoS settings . ...
-
D-Link DES-1316 - page 31
31 To change the port setting s , click on the ID parameter to enter the selected port to configure its Speed/ Duplex and Flow control. Figure 17. Speed/Duplex: This setting has six modes — 100M Full , 100M Half , 10M Full , 10M Half , Auto , and Disable — for speed /duplex or to disable the port . Flow Control: This setting determines whether ...
-
D-Link DES-1316 - page 32
32 VLAN Settings (Virtual Local Area Network) A VLAN is a collection of switch ports that make up a single broadcast domain. You can configure a VLAN for a single switch, or for multiple switches. When you create a VLAN, you can control traffic flow and ease the administration of moves, adds, and changes on the network, by eliminating the need to c ...
-
D-Link DES-1316 - page 33
33 When you select Port VLAN setting, fill in each port ’ s PVID value between 1 and 4094, Pri ority value between 0 and 7. Figure 19. Trunk Setting The Trunk function enables the Switch to connect two devices using multiple ports, increasing the bandwidth up t o 4 times that of a single port ( 800 Mbps in full - duplex mode). There are 3 selecti ...
-
D-Link DES-1316 - page 34
34 Mirror Setting s Port Mirroring is a method of monitoring network traffic that forwards a copy of each incoming and /o r outgoing packet from one port of a network switch to another port where the packet can be studied. It enables the manager to keep close track of switch performance and alter it if necessary. Configuring the port mirroring by a ...
-
D-Link DES-1316 - page 35
35 PoE Setting s When you click on the PoE Setting s , the status of the PoE will appear on the screen, it will dis play PoE Enable, Power (W), Voltage (V), Current (mA), classification , and Status. Figure 22. Press the “ Refresh ” button to refresh the status of the PoE settings . Pre ss “ SetPoE ” button to configure the PoE Port setting ...
-
D-Link DES-1316 - page 36
36 Device Status Click on the “ Status ” button to display the device status on this screen . I t will display the System Status, Port Status, VLAN Status, Trunk Status, Mirror Status, QoS Status , and PoE St atus. Press “ Refresh ” when you need to renew the posted information. Figure 24. Status ...
-
D-Link DES-1316 - page 37
37 Statistics The S tatistic s Menu screen will display the status of each port pa cket count. Figure 25. S tatistic s ...
-
D-Link DES-1316 - page 38
38 For d etail ed packet information, click on the ID parameter as Figure 26. Figure 26. ...
-
D-Link DES-1316 - page 39
39 System Settings The System Setting s include the Web Server Port, System name, Location name, Login Timeout, IP Address, Subnet Mask , and Gateway. Through the Web Management Utility, you can easily recognize the devi ce by using the System Name and the Location Name. The Login Timeout is to s et the idle time - out for security issue s. W hen t ...
-
D-Link DES-1316 - page 40
40 Trap Setting s The Trap Setting s enable the device to monitor the Trap through the Web Manage ment Utility . S et the Trap IP Address of the manager where the trap is to be sent. Figure 28. Trap Setting u System Events: Monitoring the system ’ s trap. Device Bootup: A trap when booting up the system. Illegal Login: A trap whe n there is a wro ...
-
D-Link DES-1316 - page 41
41 Abnormal* Tran smit Erro r: A trap when there is transmit data error in copper port. Abnormal*: 50 error packet count within 10 seconds. u PoE Events: Monitoring the PoE ports status. PoE Power fail: A trap when the port ’ s power source fail s or the PD64012 fail s . Power on/ Power down: A trap when the PoE port ’ s power is on and down. P ...
-
D-Link DES-1316 - page 42
42 Figure 29. Set Password Backup Setting s The backup tools help you to backup the current setting of the Switch. On ce you need to backup the setting s , press the “ Backup ” button to save the setting s . To restore a current setting s file to the device, you must specify the backup file and press the “ Restore ” button to proce ss the s ...
-
D-Link DES-1316 - page 43
43 Reset Setting The Factory Reset button helps you to reset the device back to the default setting s from the factory . Be aware that the entire configuration will be reset ; the IP address of the device will be set to the default setting of 192.168.0.1. Figure 31. Reset Setting Logout When you select this function, the W eb configuration will log ...
-
D-Link DES-1316 - page 44
44 TECHNI CAL SPECIFICATIONS General Standards IEEE 802.3 10BASE - T Ethernet IEEE 802.3u 100BASE - TX Fast Ethernet IEEE 802.3x Full Duplex Flow Control IEEE 802.3af compliant IEEE 802.1Q VLAN Protocol CSMA/CD Data Transfer Rate Ethernet: 10Mbps (half - duplex), 20Mbp s (full - duplex) Fast Ethernet: 100Mbps (half - duplex), 200Mbps (full - duplex ...
-
D-Link DES-1316 - page 45
45 Physical and Environmental A C inputs 100 - 240V AC, 50 - 60 Hz internal universal power su p ply Power Consumption 9 W atts ( m ax . no PD Device connected ) 130Watts (max. with 8 x 15.4 w PoE Device connected ) Temperature Operating: 0 ° ~ 40 ° C (32 ° ~ 104 ° F), Storage: - 10 ° ~ 70 ° C (14 ° ~ 158 ° F) Humidity Operating: 10% ~ 90%, ...
-
D-Link DES-1316 - page 46
46 P erformance Transmits Method : Store - and - forward Filtering Address Table: 4 K entries per device Packet Filtering/Forwarding Rate: 10Mbps Ethernet: 14,8 80/pps 100Mbps Fast Ethernet: 148,800/pps MAC Address Learning : Automatic update Transmits Method : Store - and - forward RAM Buffer : 512 K b ytes per device ...
-
D-Link DES-1316 - page 47
47 Warranty and Registra tion Information (All countries and regions excluding USA ) Wichtige Sicherheitshinweise 1. Bitte lesen Sie sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den spätern Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen . Vervenden Sie keine Flüssig - oder Aerosolreiniger. ...
-
D-Link DES-1316 - page 48
48 OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. D - LINK NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION W ITH THE SALE, INSTALLATION MAINTENANCE OR USE OF D - LINK'S PRODUCTS. D - LINK SHALL NOT BE LIABLE UNDER T ...
-
D-Link DES-1316 - page 49
49 Warranty service for software products m ay be obtained by contacting a D - Link office within the applicable warranty period. A list of D - Link offices is provided at the back of this manual, together with a copy of the Registration Card. If a Registration Card for the product in question has not been returned to a D - Link office, then a proo ...
-
D-Link DES-1316 - page 50
50 Subject to the terms and conditions set forth herein, D - Link Systems, Inc. (“D - Link”) provides this Limited warranty for its product only to the person or entity that originally purchased the product fro m: • D - Link or its authorized reseller or distributor and • Products purchased and delivered within the fifty states of the Unite ...
-
D-Link DES-1316 - page 51
51 Non - Applicability of Warranty: The Limited Warranty provided hereunder for hardware and software of D - Link's products will not be applied to and does not cover any refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D - Link, the sellers, or the liquidators expressly ...
-
D-Link DES-1316 - page 52
52 Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D - LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY F OR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FO ...
-
D-Link DES-1316 - page 53
53 Register online your D - Link product at http://support.dlink.com/register/ ...
Do you have a question concerning D-Link DES-1316?
Use the form below
If you did not solve your problem by using a manual D-Link DES-1316, ask a question using the form below. If a user had a similar problem with D-Link DES-1316 it is likely that he will want to share the way to solve it.