English dropdown-ico

Manual Diamond Audio Technology HA 700.4

12 pages 1.51 mb
Download

Go to site of 12

Summary
  • Diamond Audio Technology HA 700.4 - page 1

    HA 700.2 | HA 700.4 | HA 750.1 AMPLIFIER INST ALL A TION MANUAL ...

  • Diamond Audio Technology HA 700.4 - page 2

    2 Congratulations! Thank you for choosing a Diamond Audio T echnologies HEX amplier . We sincerely believe that HEX ampliers have the very best performance and value. DA T pr oducts are engineer ed and produced with the highest quality materials and incorporate the latest technology. We think you will nd your new HEX amplier meets or ex ...

  • Diamond Audio Technology HA 700.4 - page 3

    3 Fr equency Response: 20Hz to 20KHz +/-1 dB Signal to Noise Ratio: > 83dBA (20 to 20kHz) Channel Separation 53dB THD+N(T otal Harmonic Distortion + Noise) < 0.4%(Output-1W 4 Ohms) RCA Input Sensitivity: 150mV to 5V Min to Max V oltage requirements 9V to 15.5V DC High/Low Pass Cr ossover: 24dB/Oct Variabl e From 35-350Hz Cros sover Congura ...

  • Diamond Audio Technology HA 700.4 - page 4

    4 Connections and Contr ols This section describes how all of the terminals and adjustments of HEX Series ampliers function. 4 gauge power and ground wir e is recommended for all models. ...

  • Diamond Audio Technology HA 700.4 - page 5

    5 RCA Input and Pass-Thru Output - These RCA jacks allow for a normal Left and Right channel signal input. Simply connect to the source unit using RCA type audio cabl es, keeping them away from power wiring wherever possible. On the 4 channel amplifier (HA 700.4) “Fr ont” and “Rear” input jacks are present. The“Pass-Thru” output allows ...

  • Diamond Audio Technology HA 700.4 - page 6

    6 Installation Guidelines T ools and Supplies Listed bel ow are the tools and supplies needed to c omplete this installation: • V olt/Ohm Meter • Wir e strippers and wir e cutters • #2 Phillips scr ewdriver • Battery post wr ench • Hand held drill w/assorted bits • High quality electric al tape or heatshrink tubing • Soldering ir on a ...

  • Diamond Audio Technology HA 700.4 - page 7

    7 Mounting Locations Engine Compartment Never mount this unit in the engine c ompartment. Mounting the unit in the engine compartment will void your warranty . T runk Mounting Mounting the amplier v ertically will provide adequate cooling of the amplier . If you will be mounting it t o an existing panel, be sur e it’ s not prone to e xcessi ...

  • Diamond Audio Technology HA 700.4 - page 8

    8 3) T rim the power cabl e within 18 inches (45.7mm) of the positive battery post and splice in a in-line fuse holder . DO NOT install the fuse at this time. 4) Strip 1/2 inch (12.7mm) fr om the batt ery end of the po wer cabl e and crimp a lar ge ring terminal to the cabl e. Connect the ring terminal to the positive (+) batt ery post. 5) Prepa r ...

  • Diamond Audio Technology HA 700.4 - page 9

    9 Connecting Multiple Speak ers If you mus t connect more than one speaker per channel, ther e are two methods in which to do so: Series or Parallel. P arall el connections ar e har der on the amplier than series connections, as the total impedance is lower compar ed to driving a single speaker, and the amplier must pr oduce mor e current to ...

  • Diamond Audio Technology HA 700.4 - page 10

    10 Installing the Remote Le vel Controll er The HA 750.1 comes packaged with a r emote le vel contr ol. This all ows you to contr ol the l evel by attenuating the amplitude or incr easing (up to the maximum set-point) of the amplier’ s input gain c ontr ol. This contr ol does not add additional gain, it simpl y allows you to c ontrol the le ve ...

  • Diamond Audio Technology HA 700.4 - page 11

    11 Adjustment of Built-In Crosso ver (All Models) Placing the switch in the OFF position sets the amplier to Full Range . This setting allows ALL frequencies to pass to the speaker s. (Not availabl e on HA 750.1). Placing the switch in the ON position activates the cr ossov er . Placing the switch in the HP position sets the amplier to the Hi ...

  • Diamond Audio Technology HA 700.4 - page 12

    041807 Diamond Audio W arranty Diamond Audio T echnologies, (DA T) warrants this pr oduct to be free from def ects in material and workmanship for a period of one (1) y ear fr om the original date of purchase pro vided it was purchased from an authorized DA T ret ailer within the United States. Howe ver, if this pr oduct was ins tall ed by an autho ...

Manufacturer Diamond Audio Technology Category Stereo Amplifier

Documents that we receive from a manufacturer of a Diamond Audio Technology HA 700.4 can be divided into several groups. They are, among others:
- Diamond Audio Technology technical drawings
- HA 700.4 manuals
- Diamond Audio Technology product data sheets
- information booklets
- or energy labels Diamond Audio Technology HA 700.4
All of them are important, but the most important information from the point of view of use of the device are in the user manual Diamond Audio Technology HA 700.4.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Diamond Audio Technology HA 700.4, service manual, brief instructions and user manuals Diamond Audio Technology HA 700.4. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Diamond Audio Technology HA 700.4.

Similar manuals

A complete manual for the device Diamond Audio Technology HA 700.4, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Diamond Audio Technology HA 700.4 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Diamond Audio Technology HA 700.4.

A complete Diamond Audio Technology manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Diamond Audio Technology HA 700.4 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Diamond Audio Technology HA 700.4, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Diamond Audio Technology HA 700.4, that we can find in the current document
3. Tips how to use the basic functions of the device Diamond Audio Technology HA 700.4 - which should help us in our first steps of using Diamond Audio Technology HA 700.4
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Diamond Audio Technology HA 700.4
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Diamond Audio Technology HA 700.4 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Diamond Audio Technology HA 700.4?

Use the form below

If you did not solve your problem by using a manual Diamond Audio Technology HA 700.4, ask a question using the form below. If a user had a similar problem with Diamond Audio Technology HA 700.4 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)