English dropdown-ico

Manual SIIG 04-0288E

12 pages 0.17 mb
Download

Go to site of 12

Summary
  • SIIG 04-0288E - page 1

    1 USB 2.0+1394 DV Kit Quick Installation Guide 04-0288E Introducing the USB 2.0+1394 DV Kit The USB 2.0+1394 DV Kit is a complete DV editing kit -- a combo card with USB 2.0 and FireWire (1394a) interfaces, deluxe DV editing software (full DV, AVI, QuickTime, Windows Media, RealNetworks, and MPEG2 support) and a 1394 6-pin/4-pin DV cable. Features ...

  • SIIG 04-0288E - page 2

    2 • IEEE 1394-1995, P1394a (rev. 1.1) and OHCI Interface Specification 1.0 compliant • Supports serial bus data transfer rates of 100, 200 and 400 Mbps System Requirements • Pentium or equivalent computer with an available PCI slot • Windows 98SE/ME • Windows 2000 (with SP 3) or later • Windows XP (with SP 1) or later • Windows Server ...

  • SIIG 04-0288E - page 3

    3 Board Layout Figure 1. Board Layout Power Connector (optional) USB 2.0 Port USB 2.0 Ports 1394 Ports 1394 Port Note: This power connector (same as the one used with your floppy disk drive) is designed to provide additional power to the board when needed. This connection is optional . We recommend to connect this power connector when the following ...

  • SIIG 04-0288E - page 4

    4 Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed. Static Electricity Discharge may permanently damage your system. Discharge any static electricity build up in your body by ...

  • SIIG 04-0288E - page 5

    5 3. Click Start , then Run . Type in X:setup.exe and click OK . (Change X: to match your CD-ROM drive letter) 4. Click Next , Next , at the Warning box click OK , then click Finish to restart. 5. When the VIA ...Universal Host Controller is detected, click Next . 6. Choose Search for the best driver... and click Next . 7. Clear all check boxes, c ...

  • SIIG 04-0288E - page 6

    6 3. Click Start , then Run . Type X:setup.exe and click OK . (Change X: to match your CD-ROM drive letter). 4. Follow the on-screen instructions to install the driver. When prompted click Finish to restart. 5 . At the Add New Hardware Wizard , choose Automatic search for a better ... , click Next , then click Finish . 6. Click Yes to restart Wind ...

  • SIIG 04-0288E - page 7

    7 8. When Windows restarts, the drivers will install automatically. Windows XP/Server 2003 Windows XP Service Pack 1 (SP 1) or later is required for this installation. Windows XP Service Pack 1 or later will automatically detect and install the correct drivers for this board. Windows 2003 Server will automatically detect and install the correct dri ...

  • SIIG 04-0288E - page 8

    8 b) Under the 1394 Bus Controller or IEEE 1394 Bus host controllers: - VIA OHCI Compliant IEEE 1394 Host Controller Windows 2000 (with SP4 or later): a) Under the Universal Serial Bus Controllers: - VIA ... Universal Host Controller - VIA ... Universal Host Controller - VIA USB Enhanced Host Controller - USB 2.0 Root Hub - USB Root Hub - USB Root ...

  • SIIG 04-0288E - page 9

    9 Ulead VideoStudio Software Installation The USB 2.0 + 1394 DV Kit includes Ulead ® VideoStudio TM digital video editing software for producing home videos complete with attractive titles, transitions and sounds. Before installing VideoStudio, make sure your adapter and DV camcorder are properly installed and configured. See next section, Connect ...

  • SIIG 04-0288E - page 10

    10 To Verify Successful DV Camcorder Setup 1. Check Device Manager to verify successful driver installation. Windows 98SE/ME: From the main desktop, right click My Computer , then click Properties . Click Device Manager tab. Windows 2000/XP/2003: Right click My Computer , click Manage , then click Device Manager . 2. Double click Imaging Device(s) ...

  • SIIG 04-0288E - page 11

    11 Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our website at www.siig.com and click on Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and one of our technical suppor ...

  • SIIG 04-0288E - page 12

    USB 2.0+FireWire DV Kit is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation. Other names used in publication are for identification only and may be trademarks of their respective compan ...

Manufacturer SIIG Category Computer Drive

Documents that we receive from a manufacturer of a SIIG 04-0288E can be divided into several groups. They are, among others:
- SIIG technical drawings
- 04-0288E manuals
- SIIG product data sheets
- information booklets
- or energy labels SIIG 04-0288E
All of them are important, but the most important information from the point of view of use of the device are in the user manual SIIG 04-0288E.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals SIIG 04-0288E, service manual, brief instructions and user manuals SIIG 04-0288E. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product SIIG 04-0288E.

Similar manuals

A complete manual for the device SIIG 04-0288E, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use SIIG 04-0288E by users. Manuals are usually written by a technical writer, but in a language understandable to all users of SIIG 04-0288E.

A complete SIIG manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual SIIG 04-0288E - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the SIIG 04-0288E, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the SIIG 04-0288E, that we can find in the current document
3. Tips how to use the basic functions of the device SIIG 04-0288E - which should help us in our first steps of using SIIG 04-0288E
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with SIIG 04-0288E
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of SIIG 04-0288E in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning SIIG 04-0288E?

Use the form below

If you did not solve your problem by using a manual SIIG 04-0288E, ask a question using the form below. If a user had a similar problem with SIIG 04-0288E it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)