-
EverFocus EAN800AW - page 1
EAN800A/EAN800A W User ’ s Manual Copyright © EverFocus Electronics Corp, Release: Dec. 2009 Rev .D ...
-
EverFocus EAN800AW - page 2
EAN800A/EAN800A W 2 Product Name: EAN 800A EverFocus IP Network Cameras Model Number(s): EAN800A/EAN800A W FCC Notice "Declara tion of Conformity Information" RF Declaration should be added. Please check S afety team. This equipment has been tested and found to co mply with the limits for a Class A digital devic e, pursuant to part 15 of ...
-
EverFocus EAN800AW - page 3
EAN800A/EAN800A W 3 EAN800A/EAN800A W complies with CE and FCC. About this document All the safety and operating instructions shou ld be read and followed before the unit is operated. This manual should b e retained for future reference. The information in this manual was current when publish ed. The manufacturer reserves the right to revise and im ...
-
EverFocus EAN800AW - page 4
EAN800A/EAN800A W 4 remove, use a mild deter gent and wipe gently . Do not operate the appliance beyond it s specified temperature, humidity or power source ratings. Do not use the appl iance in an extreme environment where high temperature or high hu midity exists. Use the appliance at temperature within 0 ℃ ~ +40 ℃ / 32 ~ 104 and a hu m ...
-
EverFocus EAN800AW - page 5
EAN800A/EAN800A W 5 T ABLE OF CONTENTS 1. INTRODUCTION.......................................... .......................................................... 6 2. FEA TURES .............................................................................................................. 6 3. ACCESSING THE CAMERA MENU ..................................... ...
-
EverFocus EAN800AW - page 6
EAN800A/EAN800A W 6 1. INTRODUCTION The EAN800A/EAN800A W network camera provides H.264, MP EG-4 and MJPEG compression for multi-streaming capabilities. H.264 is the most advanced video compression technology that saves your bandwidth without sacrificing video qu ality . Designed with advanced digital processing circuitry for high resolution 1/3&ap ...
-
EverFocus EAN800AW - page 7
EAN800A/EAN800A W 7 3. ACCESSING THE CAMERA MENU Step 1.S tart an Internet Explorer browser . Step 2. Enter the IP address or host na me of the camera in the Location/A ddress field of your Internet Explorer browser . (Please refer to EAN800A /EAN800A W Installation Guide for how to find the IP address) Step 3. Input “Use rname” and “Password ...
-
EverFocus EAN800AW - page 8
EAN800A/EAN800A W 8 1. Press button to display the "Live" page. Double click on the image to show a full screen display , double click again or press ESC to return normal display . 2. Press button to enter Setting page. In Settin g page, there are 8 section s: [Sys tem Info], [U ser Config], [N etwork], [V ideo], [Audio], [Us er], [Event] ...
-
EverFocus EAN800AW - page 9
EAN800A/EAN800A W 9 8. Snapshot The Snapshot button saves a snapshot of the video i mage currently being displayed. The location where the snapshot data is saved can be specified in Setting -> User ’ s Config. Please refer to “4.2 User Config” for further information. 9~10. Play Audio/T ransmit Audio Click the “Play Audio” and “T ran ...
-
EverFocus EAN800AW - page 10
EAN800A/EAN800A W 10 4. SETTING Click this button to display the setup menu. 4.1 System Info System information and system log check of the setup menu can be performed on this page. The “System Info” page has 2 tabs: [Information] tab and the [Log] tab. 4.1.1 Information System Information: Firmware version, MAC address, V ideo T ype, Model nu ...
-
EverFocus EAN800AW - page 11
EAN800A/EAN800A W 11 4.1.2 Log System Log : Date/Time : displaying date and tim e of the log. Log message : all information and event message, including login, user ’ s IP , reboot, firmware upgrade, load factory default, configuration reset and event detected. System will keep the newest 256 records. ...
-
EverFocus EAN800AW - page 12
EAN800A/EAN800A W 12 Press button to export syste m log into “.txt” file and select the location where the exported log file will be sav ed to. 4.2 User Config Live view configuration is to b e set by user . Each login user can make his/her own settings for the following items: Te x t S e t t i n g Check the box for text of Machine name , Date/ ...
-
EverFocus EAN800AW - page 13
EAN800A/EAN800A W 13 Date/T ime Format Used in T ext Select Date/T i me Format from the following options: T i me Format: 24 Hours or 12 Hours. Press Apply to apply the setting changes or Reset to res et without saving the change. Recording/Snapshot Exp ort Setting Enable Event Record ing to PC: Allo w event vid eo recorded to users' P C if an ...
-
EverFocus EAN800AW - page 14
EAN800A/EAN800A W 14 press the Browse button to locate the new language file (.evb ) and then click the Load button. Press Apply to apply the setting changes or Reset to res et without saving the change. 4.3 Network The network settings and the settings relating to Network, DDNS, Bandwidth, SMTP/FTP and Network Alarm can be configured on this page. ...
-
EverFocus EAN800AW - page 15
EAN800A/EAN800A W 15 • IP address • Subnet mask • Gateway (when using the g ateway server/router) • Primary DNS, Secondary DNS (when using DNS) • HTTP Port IP SETTING IP T yp e DHCP: Configure th e DHCP server not to assign the s ame IP addresses used for the other network cameras and PCs w hose IP address is unique. Refer to the network ...
-
EverFocus EAN800AW - page 16
EAN800A/EAN800A W 16 Secondary DNS If your ISP provides you an IP addres s secondary DNS, please set it here. User name Enter User name of the account (used only for PPPoE). Password Enter Password of the account (used only for PPPoE). Press Apply to apply the setting changes or Reset to res et without saving the change. Port Setting HTTP Port Port ...
-
EverFocus EAN800AW - page 17
EAN800A/EAN800A W 17 4.3.2 DDNS DDNS setting When accessing the ca mera via the Inte rnet fro m the network environment of which the global IP address is obtaine d using DHCP , the DD NS function is necessary . T o use the D DNS function, it is necessary to connect to the dedicated DDNS server . W e offer 4 DD NS server provide rs as follow: ○ ww ...
-
EverFocus EAN800AW - page 18
EAN800A/EAN800A W 18 configure Record ID, FQDN, Username a nd password and register in DDNS server . Refer to the web site for further information about the DDNS. Press Apply to apply the setting changes or Reset to res et without saving the change. 4.3.3 Bandwidth Bandwidth Setting Max. Bandwidth: Specify , Unlimited / 64 K/ 128 K/ 256 K / 512 K / ...
-
EverFocus EAN800AW - page 19
EAN800A/EAN800A W 19 4.3.4 SMTP/FTP Set SMTP The settings relat ing to the mail s erver used to send the e- mail notification from the camera to predefined add resses via SMTP can be configured. SMTP Server: Enter the IP address or the host name of the SMTP server used to send e-mails . SMTP Port: Enter the port number for SMT P . Default is 25. Au ...
-
EverFocus EAN800AW - page 20
EAN800A/EAN800A W 20 Send T est Mail: Press button to send a testing m ail to the assigned address. Set FTP The settings relating to the FTP server used to transmit the alarm i mages can be configured. FTP Server: Enter the IP address or the host name of the FTP server . FTP Port: Enter t he port nu mber for FTP server . Default is 21. Recording Pa ...
-
EverFocus EAN800AW - page 21
EAN800A/EAN800A W 21 4.3.5 Network Alarm (reserved for PowerCon) Set Network Alar m This function is reserved for PowerCon software, for the detail setting please refer to PowerCon network alarm protocol. ...
-
EverFocus EAN800AW - page 22
EAN800A/EAN800A W 22 4.3.6 Wir eless (EAN800A W) W ireless Setting Enable: Check the box to enable wireless connection. SSID: Name of the wireless network the camera. The fie ld accepts up to 32 alphanumeri c characters. The name mus t be exactly the same as the us ed in the wireless access point or the conn ection will not be established. Network ...
-
EverFocus EAN800AW - page 23
EAN800A/EAN800A W 23 WP A (W i-Fi Pr otected A ccess) key should follow either one of the following rules: - As 64 hexadecimal (0-9, A-F) characters. - As 8 to 63 ASCII characters. WEP (W ired Equivalent Protection) key sho uld follow either one of the following rules: - As 5 characters for 64-bit WEP and 13 characte rs for 128-bit WEP . - As 10 he ...
-
EverFocus EAN800AW - page 24
EAN800A/EAN800A W 24 St ream Setting The system can output 4 video stream s simultaneously . For each of them, user can set compression for mat, resolution, quality and frame rate individually . Stream 1 is always enabled for live view . Check “Enable” box to enable other streams. Format: Select encode format from H.264, MPEG4 and MJPEG . Resol ...
-
EverFocus EAN800AW - page 25
EAN800A/EAN800A W 25 4.4.2 Camera Image setting Hue : to in crease or decrease hue of video images. It is adjustable from 0~255. Contrast : to increase or decrease object contrast of i mages. It is adjustable fro m 0~255. Saturation : to increase or decrease color saturation of video images. It is adjustable from 0~255. Brightness : to incre ase or ...
-
EverFocus EAN800AW - page 26
EAN800A/EAN800A W 26 BLC : Select ON or OFF for Backlight Compensat ion. ON: When the background of the subject is very bright and the subject itself is dark , set the BLC ON . The BLC will mea sure the lig ht of the image center and the lens iris will auto matically set for optimu m image quality . OFF: Backlight w ill not be co mpensated. FL : Se ...
-
EverFocus EAN800AW - page 27
EAN800A/EAN800A W 27 4.5 Audio The EAN800A/EAN800A W camera can transmit audio to other clients using a built-in microphone or connecting to external microphone to play audio received from other clients via connected speakers. This s ection describes how to configure the basic audio settings. Audio Check Enable Audio box to enable audio function. A ...
-
EverFocus EAN800AW - page 28
EAN800A/EAN800A W 28 4.6 USER User Information Maximum 10 users can be set for using the IP camera. The user information displays the authorized users and acc ess levels: • Sup ervisor/Administrator –a supervisor/administrator has unrestricted access to the Setting menu and can determine the registration of all other users. H owever , administr ...
-
EverFocus EAN800AW - page 29
EAN800A/EAN800A W 29 4.7 EVENT An event in the camera is when an Ev ent T y pe is activated and causes cert ain actions to be performed. The e vent type is the set of conditions that specifies how and when which actions will be performed. This table describes how to setup action types and event ty pe. E v e n t T y p e Action T ype Alarm Inpu t Man ...
-
EverFocus EAN800AW - page 30
EAN800A/EAN800A W 30 Press button to add an event condition. T o modify the event list, click on the event and it will be highlighted. Pr ess button to modify the setting. T o remove an event fro m event list, click on the event and it will be highlight ed. Press button to remove the event. Check Enable checkbox to activate event actions when the e ...
-
EverFocus EAN800AW - page 31
EAN800A/EAN800A W 31 This example describes how to set the camera to upload i mages to FTP when someone press Manual trigger button: 1. Click button in Event pag e. 2. Enter an ev ent name for the event, e.g. Event 1 3. Select “Manual T rigg er” as event ty pe. 4. Select “Upload to FTP” as action type. 5. Check “Enable Pre-alarm Buf fer? ...
-
EverFocus EAN800AW - page 32
EAN800A/EAN800A W 32 4.7.2 Motion Motion Detection User can define the motion area to be detected by left clicking the mouse to draw lines. Every click is an end point of the lin e. When the detec tion area is formed, double click the mouse to have all the lin es connected. T o remove the selection, simply right click the mouse, the selected po lyg ...
-
EverFocus EAN800AW - page 33
EAN800A/EAN800A W 33 4.7.3 Alarm Alarm Output Setting Conta ct T ype: No rmal Close, Normal Op en Duration T ime: Select duration time of alarm output from 5 sec, 10 sec, 20 sec, 30 sec, 60 sec, 2 min, 3 min and 5 min. Press Apply to apply the setting changes or Reset to res et without saving the change. Pre/Post Alarm Setting This function is used ...
-
EverFocus EAN800AW - page 34
EAN800A/EAN800A W 34 Re-trigger Filter Setting Re-trigger Filter: Set a re-trigger filter time, if another event is triggered during this time, this triggered event will be ignored. Press Apply to apply the setting changes or Reset to res et without saving the change. 4.7.4 Time Mask T i me Mask Setting T i me mask setting allows you to schedule ev ...
-
EverFocus EAN800AW - page 35
EAN800A/EAN800A W 35 An example on how to set we ekend as time mask is as fol lows: 1. Click f ro m time mask set ting . 2. Enter Mask name, e.g. W eekend. 3. Check “Sun” & “Sat” boxes. 4. Select “Start time” and “End time” or “Full day”. Press Apply to apply the setting changes or Reset to res et without saving the change. ...
-
EverFocus EAN800AW - page 36
EAN800A/EAN800A W 36 Machine Name Setting Machine Nam e: Enter the name of the camera. The entered name will be displayed in the status display area. Press Apply to apply the setting changes or Reset to res et without saving the change. Set T ime Zone T ime Zone: Select a time zone according to the lo cation where the camera is in use. Set Date/T i ...
-
EverFocus EAN800AW - page 37
EAN800A/EAN800A W 37 Press Apply to apply the setting changes or Reset to res et without saving the change. 4.8.2 Daylight Saving Set Daylight Saving Check Enable Daylight Saving checkbox to enable day light saving. Set the start time to daylight sav ing time. Set the start week of day light saving ti me: 1 st / 2 nd / 3 rd / 4 th / Last Set the st ...
-
EverFocus EAN800AW - page 38
EAN800A/EAN800A W 38 Set the end month of daylight saving ti me: January / February / March / April / May / June / July / Augus t / September / October / November / December . Set the ending time change of daylight sav ing time: Choose the “From” time and “End” time when daylight saving ends. Press Apply to apply the setting changes or Rese ...
-
EverFocus EAN800AW - page 39
EAN800A/EAN800A W 39 Event Recording: FTP backup only: Event video will re cord to SD card when network is disconnected . Normal: Follow the event actions settings you have made in “Event” menu to record event video to S D card. Overwrite: Select ON for overwriting data when SD card memory is full. Select OFF for not overwriting SD card data. P ...
-
EverFocus EAN800AW - page 40
EAN800A/EAN800A W 40 4.8.4 Maintenance Maint enance Se rver Reboot: The unit is rebooted without changing any of the settings. Use this method by pressing Reboot button if the unit is no t behaving as expected. Restore: The unit is restarted and most current settings are reset to the factory defaul t value s by pre ssing Re stor e button. The onl y ...
-
EverFocus EAN800AW - page 41
EAN800A/EAN800A W 41 Save/Load Configuration Server T o take a backup of all of the configurations, press Save to save all configurations to a config. file. If necess ary , it is then possible to return to the prev ious settings if the settings are changed and there is unexp ected behavior . Press the Browse button to locate the saved config. file ...
-
EverFocus EAN800AW - page 42
EAN800A/EAN800A W 42 5. SPECIFICA TIONS CAMERA Pickup Device 1/3" Sony Super HAD Inter laced CCD Pixel Effe ctive NTSC: 768 (H) x 494 (V); P AL: 752 (H ) x 582 (V) Sensitivity 0.4 Lux / F=1.2 Day & Night Ye s Lens Optional C/CS mount, manua l / DD control supported V ideo Output BNC socke t, composi te 1 V p-p / 75 Ω V ideo Outpu t Resol ...
-
EverFocus EAN800AW - page 43
EAN800A/EAN800A W 43 Power Supp ly 12 VDC & PoE Power cord w ith 5.5 mm cable socket, 5.5 mm adapter cable 20 cm included in packag e Power Over Ethernet Y es (PoE 802.3af) Power Co nsumpti on 5W m ax. (12V DC) PHYSICAL W eight 500 g ; 1.102 LBS Dimensions 68 (W) x 57 (H) x 136 (D) mm / 2.7" (W) x 2.2" (H) x 5.4" (D) W ith BN C s ...
-
EverFocus EAN800AW - page 44
EAN800A/EAN800A W 44 China Office: Room B-05D-1, KESHI PLAZA, Shangdi Information Industry Base,Haidian District, Beijing China 100085 TEL: +86-10-62973336/37/38/39 F AX: +86-10-62971423 www .everfocus.co m.cn Eur ope Offi ce: Albert-Einstein-Strasse 1 D-46446 Emmerich, Germany TEL: 49-2822-9394-0 F AX: 49-2822-939495 www .everfocus.de Japan Office ...
Do you have a question concerning EverFocus EAN800AW?
Use the form below
If you did not solve your problem by using a manual EverFocus EAN800AW, ask a question using the form below. If a user had a similar problem with EverFocus EAN800AW it is likely that he will want to share the way to solve it.