English dropdown-ico

Manual EverFocus EDR 810

162 pages 10.78 mb
Download

Go to site of 162

Summary
  • EverFocus EDR 810 - page 1

    I n s t r u c t i o n M a n u a l E E D D R R 1 1 6 6 4 4 0 0 / / 1 1 6 6 2 2 0 0 / / 9 9 2 2 0 0 ...

  • EverFocus EDR 810 - page 2

    E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N E D R 1 6 4 0 / 1 6 2 0 / 9 2 0 I n s t r u c t i o n G u i d e  2 00 5 E ver Foc us El ect ron ic s Corp www .eve rfoc us .com Al l r igh ts res erv ed . N o par t o f t h e co nte nt s of thi s m anua l m ay be re pro duce d or tr an smi tt ed i n any form or by any m eans w ith ou ...

  • EverFocus EDR 810 - page 3

    ii Federal Comm unication Commission Inter ference Statement This equipment has b een tested and found to comply with the limits for a Class B digita l device, pursuant to Pa rt 15 of the FCC Rules. These limits are designed to provide rea sonable protection against harmf ul interference in a residential installation. This e quipment generate s, us ...

  • EverFocus EDR 810 - page 4

    iii Non-L PS or TNV output connectors iden tif y the t ype of circuit, inten ded cable type or rele vant circuit characteristics. (Ma rking or Instruction) “ CATUION : Risk of Explosion if Battery is replaced by an Inc orrect T ype. Dispose of Used Ba tteries According to the Instructions.” ...

  • EverFocus EDR 810 - page 5

    iv TABLE OF CONTENTS 1. PRODUCT OVERV IEW ................................ ................................................................ .. 1 1.1 F EATURES ................................................................ ........................................................... 1 1.2 S PECIFICATIONS ................................ ........... ...

  • EverFocus EDR 810 - page 6

    v 3.11.4 HDD FULL........................................................................................................................................... 61 3.12 S YSTEM S ETUP M ENU ................................ ................................ ................................ .... 63 4. RECORDING OVERVIEW ................................ .. ...

  • EverFocus EDR 810 - page 7

    vi 15.1 T RANSMISSION S ETTING ................................ .............................................................. 133 15.2 R EMOTE C ONT R OL P ROTOCOL ................................................................ ..................... 134 APPENDIX A: RE MOTE CONTROL................................ ................................ . ...

  • EverFocus EDR 810 - page 8

    vii S a f e t y W a r n i n g Notice: The inform ation in this m anual was c urrent when pub lished. The m anufacturer reserves t he right to re vise and im prove its products. All specif ications are therefore subject to change w ithout notice. WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THI S APPLIANCE TO RAIN OR MOISTURE. Pre ...

  • EverFocus EDR 810 - page 9

    viii S a f e t y P r e c a u t i o n s ( 1 )  Refer all work r elated to the installation of this product to qualified service personnel o r system installe rs.  Do not block the ve ntilation opening or slots on the cov er.  Do not drop metallic parts through slots. This could permanently damage t he appliance. If this does happen, turn th ...

  • EverFocus EDR 810 - page 10

    ix S a f e t y P r e c a u t i o n s ( 2 ) Read Instructions — Al l the safety and operating instructions should be read before the unit is operated. Retain Instructions — The safety and operating instructions should be retained fo r future reference. Warnings — All warning s on the unit and in the opera ting instructions should be adhe r ed ...

  • EverFocus EDR 810 - page 11

    1 1 . P r o d u c t O v e r v i e w T he ED R1 6 40 / 16 2 0/ 92 0 DV R’ s ar e th e in d us tr y ’s f i rs t fu l l -f e a tu r ed dig ita l vid e o re co rd e r de s ig n ed sp ec if i ca lly fo r us e wi th in th e CC TV se cu r it y ind ust ry . ED R1 6 40 / 16 2 0/ 92 0 DV R’ s in c or po ra te s al l th e be n e fi ts of di g it a l v i ...

  • EverFocus EDR 810 - page 12

    2 1 . 2 S p e c i f i c a t i o ns Video Form at NTSC or PAL Video Input 16 / 9 BNC camera inputs (1Vp-p/75ohm) 1 BNC video out ( 1Vp-p/75ohm) and S-Video out for Main Monitor 1 BNC video out ( 1Vp-p/75ohm) for Call Monitor Video Output 16 / 9 BNC video out (1Vp-p/75ohm) for Looping Video Compre ssion MPEG4 EDR1640 Rec ording Resolution 720x480 (NT ...

  • EverFocus EDR 810 - page 13

    3 RS-232 9-pin female connector for testing purposes RS-485 For Keyboar d and PTZ connection Audio 4 mono inputs, 1 mono ( SPEAKER) outputs Power Source AC100~240 Power Co nsu mption 60W Dimension 430 (W) x 88 (H) x 300 (D) mm / 17 ” (W) x 3.5 ” (H) x 12 ” (D) Weight 6.24 kg (approx. 13.7 lbs) Operating Tem perature 0 o C ~ +40 o C / 3 2℉ ~ ...

  • EverFocus EDR 810 - page 14

    4 1 . 3 F r o n t P a n e l K e y p a d s K ey s: 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 16 17 18 19 20 21 22 23 1. REC: Press this key to start insta nt recording. 2. STOP: Press this key to stop recor ding and pl aying back. 3. PLAY: Press this key to start p laying back. 4. PAUSE: Press this key to pause the playback picture. 5. SEARCH: Press this ...

  • EverFocus EDR 810 - page 15

    5 12. SEQ: Press this key to enter the auto seq uential switching mode. 13. CALL: Press this key to enter and set up CALL MENU . 14. MENU: Press this key to enter/exit the Main Menu or to exit from any subme nu. 10. MODE: Switch PIP, 4, 7, 9, 10, 13 a nd 16 displays in Live and Playback modes . 11. ZOOM: I n full screen mode, 2x electronic zoom . Z ...

  • EverFocus EDR 810 - page 16

    6 15 . S huttle and Jog Dial Shuttle: In the Playback mode, turn the Shuttle dial to fast forwa rd/rewind the video. In the Pause mode, turn the Shuttle dial to slow forwar d/rewind the video. In the eve nt list, turn the Shuttle to chang e pages. Jog Dial: In the Pause mode, turn the Jog dial to forward/rewind the vide o frame by fra me. In the M ...

  • EverFocus EDR 810 - page 17

    7 1 . 4 Ba c k P a n e l C o n ne c t i o ns 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Audio IN: Audio inputs 1~4 for recording , and it can be set to “ YES ” or “ NO ” in the RECORD SETUP MENU. Audio OUT: Connect an audio output to a monitor or other device. AUDIO 1 2 Main Power plug: power source to AC 100~ 240 V. POWER MAIN MON ITOR: Thi s con ...

  • EverFocus EDR 810 - page 18

    8 LAN Connect or: The RJ-45 network conne ction. LAN 7 RS232 RS232 connector : D -Sub 9 pin connector for testing purposes only . 8 RS485 RS485 connector : RJ 45 Connector for RS485 control (via EKB 500 controller) and for multi Digital Video Rec order c ascade. 9 For EDR920 Ser ies: VIDEO OUT(1~9): Top row B NC connectors for video looping out 1~9 ...

  • EverFocus EDR 810 - page 19

    9 Matrix outputs 1~4: BNC connectors f or Matrix monitor outputs 1~4. Matrix Outputs SCSI Connector: For connecting the optional ED A800 storage ex pansion. SCSI Connector Mouse: PS/2 connec tor for mouse input. Mouse S-Video: PS/2 connec tor for S-Video monitor ou tput. S-Video Cascade 11 12 13 14 15 Cascade is desig ned for connecting a number of ...

  • EverFocus EDR 810 - page 20

    10 1 . 5 M o n i t o r D i s p l a y 1. Channel tag 2. Event sign 3. Select sig n 4. Play status ba r 5. Record status bar The status informa tion of the cameras or machine will show up, an d be located at different place s on the screen. 2. Event sign: Event signals which are small ic ons with a c apital letter and red background show the events o ...

  • EverFocus EDR 810 - page 21

    11 Tempera ture indication. This shows if the hard drive’s temper ature is overheated. Overheat is dete rmined in HDD TEMPERATURE of WARNING SETUP MENU . Fan fail indication. This shows whe n the fan fails to work normally. If you get this warning, con tact technical support for assistance . 3 . Select sign: You can assign a camera to a display b ...

  • EverFocus EDR 810 - page 22

    12 1. Current date The current da te which is set in the TIME/DATE SETUP MENU . 2. Record st atus Displays c urrent Hard Drive and record position. R01: currently recor ding on Disk 1 16%: currently recording a t 16% of total HD position NOTE: Pe rcentage only indicates the physic al point of recording on the Hard Drive, not the total disk space us ...

  • EverFocus EDR 810 - page 23

    13 2 . I n s t a l l a t i o n T he in s ta l la t io ns d es c ri b e d be lo w sh o ul d be ma de b y q ua li f ie d se r vi c e pe r so n ne l or sy st e m in st a ll e rs . Pl e a se ch e c k a cc es so r ie s in th e pa ck a g in g be f or e be g in n in g in st a ll at i on . Pl e as e re fe r to the fo l lo w in g d ia g r am fo r t h e ba s ...

  • EverFocus EDR 810 - page 24

    14 2 . 1 V i d e o C o n n e c t i o n s, D V R ca s c a d i n g Sa mp le in st a l la t io n w i th m ax im u m c a me ra a nd m o ni t or co nf ig ur at i on : Di ag ram 2 .3 Ca me ra s an d mo n i to r s ha ve to be ca b le d w it h 75 Oh m vi d eo ca b le , e. g . R G - 59 , RG -6 , RG -1 1 a nd su ita ble B N C pl u g s. D ue to in a pp r op r ...

  • EverFocus EDR 810 - page 25

    15 D VR Ca s ca din g T he di g it a l v id e o r e co r de rs p ro v id e " CA SC A DE I N" an d "C A SC A DE OU T" vi d e o c on n ec tio ns. I n c om b in a ti o n wi th EK B 50 0 key bo a rd , up to 25 5 ED R 16 4 0/ 16 20 /9 20 c an be ca sc a de d an d a dm in ist r a te d v ia on e s i ng le ma in mo ni to r. Ca sc a di n ...

  • EverFocus EDR 810 - page 26

    16 2 . 2 A u d i o C o n ne c t i o n I n s t a l l at i o n Sa mp le in st a l la t io n w i th a ud io c o nn e ct i on to v id e o c am er a s pr ov id in g au dio o ut pu t: D ia g ra m 2 .5 T he ED R 16 4 0/ 1 62 0 /9 2 0 DV R s pr ov id e 4 au d io in p u ts a n d 1 a u di o o ut pu t. T he in p ut s a r e d es i g ne d fo r m ax . 5 00 m V t ...

  • EverFocus EDR 810 - page 27

    17 2 . 3 S p e e d D om e I n s t a l l a t i on Sp e e d do me or te le me t ry re c e iv er pa n/ ti lt /z oo m co nt r ol is av ai la b le th r ou g h we b br ow se r o r the o pt io n al Po we r Co n so ft w ar e if th e DV R is c on nec te d to a n et w or k. L oc al te le me t ry co nt r ol is p ro v id e d by t h e o pt io na l E K B 5 0 0 k ...

  • EverFocus EDR 810 - page 28

    18 A TT EN T I ON : Som e Pe l c o- D / -P p r ot o co l d o me s an d r e c ei v e rs r e qu i re a n a dd r es s o f fs e t o f -1 . I n o th e r w or d s, t he a dd r es s a s si g ne d to th e d o me / r ec ei ve r i n t h e D VR ca me ra m en u m u st b e 1 b el o w th e ad d re ss se t i n the d om e / r ec ei ve r it se lf ! ( i. e . D VR I ...

  • EverFocus EDR 810 - page 29

    19 D es c r ip ti o ns : A LM I Nx x : Al a rm in p ut x x (1 ~ 16 ) G ND : co m mo n gr o un d f o r a la rm in pu ts A LM _ CO M x: o utp ut r e la y x , c o nt a c t r oo t A LM _ NO x : o u tp u t re lay x , N O c on ta c t A LM _ NC x: o utp ut re la y x , N C c on ta c t A LM R ST : A la r m r es e t, co ntr ol i np u t fo r al ar m r es et , ...

  • EverFocus EDR 810 - page 30

    20 SPARE_ IN: N.O. Control input for playback f unction, playback is active as long contact is closed. NO contact alarm input co nnection: NC contact alarm input co nnection: Output relay in idle state: ...

  • EverFocus EDR 810 - page 31

    21 2 . 5 E D A 8 0 0 s I n st a ll a t i o n ( o p t i o n a l ) T he ED R 16 4 0/ 16 20 /9 2 0 ima ge st or a g e c a pa c ity c a n be ex p an d ed u si n g ED A8 00 s ha r d d is k e xp an sio n u n i ts . Ma x. 6 E DA 80 0s wi th 8 ha rd d i sk s ea ch c an b e c o nn ec te d vi a SC S I bu s . D ia g ra m 2 .8 F or in s ta l la ti o n de ta il ...

  • EverFocus EDR 810 - page 32

    22 2. 6 . 2. Ne tw or k c o n ne c ti o n th r ou g h pa tc h ca bl e D ia g ra m 2 .1 0 T he co nn e c ti on to a n e xi s ti ng ne tw or k re qu ir e s a no rm al p a tc h c a bl e ( st ra ig h t- thr ou g h) . T he il l us tr at io n sh ow s th e co n ne ct io n to a ne t wo r k s wi t ch , ro u te r o r mo d em . 2. 6 . 3. N et w or k sy st em ...

  • EverFocus EDR 810 - page 33

    23 2 . 8 F i n a l I n s t a l l P r o c e ss O nc e y ou h av e co mp l et e d th e b as i c w ir in g in sta lla ti on an d th e h ar d di sk dr i ve in s ta l la t io n y ou ar e r ea dy t o tu r n on t h e D VR . S im pl y p lu g in th e po we r sou rc e a nd t u rn t h e sw i tc h t o t h e on p o si tio n . Th e PO WER L ED li g ht s wi ll li ...

  • EverFocus EDR 810 - page 34

    24 3 . D V R M e n u S e t u p A ss um i ng y o u ha v e co mp le t ed th e fi r st tw o ch ap ter s of th is ma n ua l , y o u ar e no w rea dy to beg in se tti n g up th e d ig it al v id e o re c or de r. T he fo ll ow ing ch a pt e r wi l l wa lk y o u th ro u g h th e de ta il e d DV R M en u st e p by ste p an d ho w to se t t he DV R fo r y ...

  • EverFocus EDR 810 - page 35

    25 3 . 1 T im e / D a t e S e t u p M e n u Di ag ram 3 .2 D ia g ra m 3. 2 is a sc r e en sh ot of th e TI M E/ D AT E SET U P M EN U . Th is me nu is use d to se t up the c or r e ct ti m e an d da te fo r y our r eg i on o f th e wo r ld . Yo u ar e a bl e to se t up day li g h t sa vi n g s as we ll as sy nc h it w it h a n i n te r ne t b a se ...

  • EverFocus EDR 810 - page 36

    26 5 . DA Y LI G HT SAV IN G : Th is fi e ld r ep r e se n ts th e d ay li g ht sa v in g s on th e DV R. To c ha n g e th is , si m pl y us e t h e J og Di al o n t he D V R. Se l ec t “ ON ” or “ OF F ” to e na bl e o r di s ab le d ay lig ht sa v in g ti m e fu nc ti o n. I n or de r to se t a day li g ht sa v ing ti me zon e, y ou nee d ...

  • EverFocus EDR 810 - page 37

    27 To se t th e e nd i ng t im e cha n ge of da yl ig ht sa vi ng ti m e: Ch oo se wh e n th e tim e c ha n ge s fr om th e ol d t i me ( F RO M ) to th e n e w t im e ( TO ) w he n d ay lig ht s a vi n g en ds . 8 . TI M E SY N CH R ON IZ E Se le ct “ ON ” or “ OF F ” to en a bl e or d is a bl e ti me sy nc h ro n iz e, w h i ch w il l up ...

  • EverFocus EDR 810 - page 38

    28 Pa ci fi c D ay l ig ht Ti m e s ub t ra c t 7 h o ur s f r om GM T Pa ci fi c S ta nd ar d Ti me s ub tr ac t 8 h ou r s f ro m G M T A la s ka Da y lig h t T im e s u bt r ac t 8 ho u rs fr om G M T A la s ka St a nd a rd T im e s ub tr a ct 9 h ou r s f ro m G M T H aw ai i- A le ut ia n D ay li g ht T ime s ub tr ac t 9 h o ur s f ro m G M T ...

  • EverFocus EDR 810 - page 39

    29 3 . 2 Ca m e r a S e t u p M e nu Di ag ram 3 .4 D ia g ra m 3 .4 i s a s cr ee n s ho t o f t h e CA ME RA SE T U P M ENU . Th i s me nu w i ll w a lk y ou t h ro ug h se tti n g u p t h e C am e r a R ec or di n g Spe ed s, Ca m er a ti tl es , c ov er t m od e s, an d r ec or d in g q u a li ty . I n th e C AM ER A SE T UP M EN U t h e f ol l ...

  • EverFocus EDR 810 - page 40

    30 4 . SE Q (M A IN /C AL L) : Se t the dw el l ti me fo r se qu en c e s on th e Ma in or Ca l l M on i to rs . T o c ha ng e t hi s, si mp ly u se th e J og D ia l o n t he D VR . 5 . RE C QU AL IT Y : Se le ct a n i ma g e qu al it y fo r rec or di n g . T he re ar e si x di ff er en t q ua l it ie s a va ila ble . A hi g he r ima ge qu a l ity ...

  • EverFocus EDR 810 - page 41

    31 6 . RE C S P EE D & A CT IO N : TP : Sc h ed u le d r ec or di n g tim e 1~ 8 wh i ch ca n be se t in th e SC H ED U LE SE T UP ME N U. “ N” is th e n o rm a l r e co r di n g pe ri o d , w hi c h is a ct iv at ed by p re ss in g t h e R ec or d bu t to n . If y ou h av e se t a Ti m e Pe ri o d in Sc he du l e Se tu p Me n u, th en th e ...

  • EverFocus EDR 810 - page 42

    32 7 . SU M MA RY : Di ag ram 3 .5 D ia l J og to ch a ng e i te m s i n t he SU M M AR Y t ab l e. A ll ca m er as ’ st at u se s ar e sh ow n in th e SU MM AR Y ta b le . Th e ta b le is fo r ch e c ki n g c am er a o ve r a ll s ta tu se s o n ly , no t f or s e tt in g . N ot e : Th e S U MM AR Y ta ble al s o e xi s ts in AL A RM , MO T IO N ...

  • EverFocus EDR 810 - page 43

    33 3 . 3 Re c or d S e t u p M e n u Di ag ram 3 .6 Diagram 3.6 is a screen shot of the RECORD SETUP MENU . This menu is for setting up the options for recording audio and video. In th e RECORD SETUP MENU the following fields are define d as follows: 1 . RE C OR D A U DI O : Y ES : A u di o w i ll be re co r de d w h en ma ch in e i s r e c or di n ...

  • EverFocus EDR 810 - page 44

    34 4 . WA T ER M AR K : ON : Re co r di n g i s o ve rl ai d b y a v is ib le w a te r ma rk ( “W ” ) . OF F: N o w a te r ma r k . 5 . RE SO L U TI ON : Th e r e so lut i on s fo r NT SC a re 72 0 x4 8 0, 7 20 x2 40 an d 3 6 0x 2 40 . Th e d ef a ul t v al u e is 72 0 x2 40 . Th e re sol u ti o ns fo r PA L ar e 72 0 x2 88 , 72 0 x5 76 an d 36 ...

  • EverFocus EDR 810 - page 45

    35 3 . 4 A l a rm S e t u p M e nu Di ag ram 3 .7 D ia g ra m 3. 7 is a s cr e e n s h ot of t he A LA R M SE T U P ME N U . An al a rm is de fi ne d as a n e le ct ro n ic o r me c ha n ic a l de v ic e th a t se n ds a wa rn in g si g n a l u nd e r sp ec if ic c ir c um s ta n c e s. I n th is c as e th e si g n al tr i gg er s th e re c or der ...

  • EverFocus EDR 810 - page 46

    36 3 . LO G Y ES : Se l ec t YE S i f y ou w is h t o r ec or d Al a rm Ev e nt s i n t he L og . N O: Se l ec t N O i f y ou d o n ot w ish to re co r d A la r m Ev en ts i n th e L og . 4 . AC T IV E CA ME R A T hi s f ie l d is to ac ti va t e c am er a y o u wa nt to ha v e th e al a r m en a bl e d to o . Fo r ex am p le if y ou ha d a n e xte ...

  • EverFocus EDR 810 - page 47

    37 1 2. C A LL M ON : Di s pl ay o n a c a ll m o ni t or wh e n a n a l ar m o c c ur s . N O C HA N G E: N o c h an ge o n th e ca ll mo nit o r d i sp l ay w he n an al a r m o cc ur s. SEQUENCE: Display in sequenc e mode on call monitor when an alarm oc curs, according to sequenc e duration set in Camera Setup M enu. ACTIVE CAMER A: Display the ...

  • EverFocus EDR 810 - page 48

    38 3 . 5 M o t i o n S e t u p M e n u Di ag ram 3 .8 D ia g ra m 3. 8 is a sc r e en sh ot of th e M OT IO N SE T UP M EN U . We de fi ne mo ti on as a ch a ng e of p ix il a ti o n in th e f ie ld of vi ew , w hic h i s de te ct e d by th e di g it a l v i de o r ec or de r an d t r ig ge r s t he rec or de r to st a rt r ec or di ng . Th is me n ...

  • EverFocus EDR 810 - page 49

    39 3 . LO G Y ES : Se l ec t YE S i f y ou w is h t o r ec or d Mo ti o n E ve nt s i n t he L og . N O: Se l ec t N O i f y ou d o n ot w ish to re co r d Mo ti on E ve nts in th e L og . 4 . DU R AT I ON T he am o un t o f t im e a m ot i on ev en t w il l r e co r d - f ro m 1 s e c to 9 9 s ec on ds . T h e d ef au lt va l ue i s 5 se co nd s. ...

  • EverFocus EDR 810 - page 50

    40 1 3. M O TI ON A RE A E nt e r a de si r ed ch an ne l an d p re ss SEL EC T o r mi dd le mo u s e bu tt o n to ed i t a mo ti o n a re a. M OT I O N mus t b e s e t a s “ E na b le ” in o r de r t o e di t t h e m o ti on de te ct i on a re a . To quit the motion are a edit, press MENU or righ t-click the mouse to obtain a selec tion menu, ...

  • EverFocus EDR 810 - page 51

    41 3 . 6 V I D E O L O S S S e t u p M e n u Di ag ram 3 .9 Diagram 3.9 is a screen shot of t he VIDEOLOSS (Video Loss) SETUP MENU . VIDEOLOSS event is caused b y no video signal input for the channe l, usually when the camera fails or loses power. How to se t up s ystem re sponse for VIDEOLOSS is introduced in this se ction. In the VIDEOLOSS SETUP ...

  • EverFocus EDR 810 - page 52

    42 5 . AL A RM EM AI L : Se le ct “ Y ES ” fo r se n di ng a n e m ai l wh e n V id eo L oss e v en t o cc ur s. T he e ma i l a dd r e ss c an be se t in th e N ET W OR K SE T UP M E NU . 6 . BU Z Z ER : A ud i bl e a l ar m b uz ze r. EN AB LE : To en a b le a V I D EO L O SS b uz ze r . D IS AB L E : T o d i sa b le a VI DE OL O SS b uz z er ...

  • EverFocus EDR 810 - page 53

    43 3 . 7 N e t w o r k S e t u p M e n u Di ag ram 3 .1 0 D ia g ra m 3. 1 0 is a sc r ee n sh ot of th e NE TW OR K SE T UP M EN U . Th is me nu is fo r se t ti ng up th e c on f ig ur a ti on s fo r ne tw o rk in g t o th e DV R . Th er e ar e 6 su be nt ri e s in th e NE TW OR K S ET U P M EN U : C ON F I G , AL A RM , EM A IL , P A SS W OR D , ...

  • EverFocus EDR 810 - page 54

    44 2 . IP A dd re ss T hi s f ie l d sh ow s t he cu r re nt I P Ad dr e ss fo r the DV R . A F ix e d I P ad dr es s do es n ot ch a ng e an d mu st be se t ma nu al ly . To c ha ng e th is , si m pl y us e th e Jo g Di a l on th e DV R . Wh e n DH CP is se le ct e d , th e D HC P s e rv er w i ll a ss ig n t h is va l u e a ut o ma tic al ly . N ...

  • EverFocus EDR 810 - page 55

    45 1 0. B W C ON TR OL T hi s c on fi g ur a ti o n a ll ow s u se r t o c o nt r ol th e b a nd w i dt h o f D V R. 1 1. M A C AD DR T hi s f ie l d is fo r tho se I nt er ne t se r vi c e p ro v id e rs or Ne tw or k ad mi n is tr a to r s wh o r eq u ir e a MA C a dd r e ss o f th e n e tw o rk c ar d of t he D VR . T h is op tio n ca nn ot be c ...

  • EverFocus EDR 810 - page 56

    46 4 . SE RV E R 1 : a ss ig n th e I P ad dr es s o f A l ar m s e r ve r 1 . 5 . SE RV E R 2 : a ss ig n th e I P ad dr es s o f A l ar m s e r ve r 2 . 6 . SE RV E R 3 : a ss ig n th e I P ad dr es s o f A l ar m s e r ve r 3 . 3. 7 . 3 EM AI L I n t he E M AI L of th e N ETW OR K SET U P M E NU , we d ef i ne : Di ag ram 3 .1 2 I n t he E M AI ...

  • EverFocus EDR 810 - page 57

    47 5 . P AS SW D I n pu t the p as s wo r d i f t he SM T P se rv er r eq uir es A u th e nt i ca tio n . 6 . RE C EI V. EM A IL AD D R I n pu t th e e - ma il a dd re ss fo r r e ce ivi n g e -m a il me s sa g e s w he n t h e E VE NT i s e n ab l ed an d tr ig ge r ed . E xa mp l e: I n Mo t io n Se t u p Me nu , if th e “E M AI L/ N ET WO RK ? ...

  • EverFocus EDR 810 - page 58

    48 T o ch a n g e th is , pr es s En t e r to mo ve to ea c h c ha r a ct e r a nd us e th e Jog Di a l on th e DV R to c ha ng e e ac h c ha ra c te r. N ot e t ha t t h e p as s wo r d i s lim i t ed to nu mb e r s on ly . T he r e a re 3 l e ve l t y pe s: 1 . Ad m in : U se r ha s al l th e ri g h ts in cl u di n g vi e wi n g li ve vi d eo , p ...

  • EverFocus EDR 810 - page 59

    49 4. SECONDARY DN S If your ISP provide s you with a secondary DNS address, plea se set it in here. NOTE: Please com plete all settings in the PPPoE Setup Menu before changing IP CONFIG to PPPoE in the CONFIG options. If y ou make this change be fore completing PPPoE settings, then the PPPoE fun ction will not work. 3. 7 . 6 DD NS I n t he D D NS ...

  • EverFocus EDR 810 - page 60

    50 4. RECORD ID Identity tag used b y c ertain DDNS providers 5. FQDN T he do m ai n n a me o f th is ac c ou nt. NOTE: If using “EverF ocusDDNS.com” as the server, there is less information required . For more details on DD NS setup, see the Networking sec tion of the manual . ...

  • EverFocus EDR 810 - page 61

    51 3 . 8 S c h e d u l e S e t u p M e n u Di ag ram 3 .1 6 D ia g ra m 3. 16 is a sc re en sh ot o f th e SC HE D UL E SE TU P ME NU . I n th i s me n u y ou ca n se t a u ni qu e ti m er to st a rt re c or d in g fr om a sp e ci f ie d st a r t ti me to an e nd ti me . Th i s me n u wo r ks tog et h er w it h t he CA ME R A me nu ; y o u wi ll no ...

  • EverFocus EDR 810 - page 62

    52 Ho ur : 0 ~ 23 in 2 4 ho u r t im e f or ma t; 1~ 1 2 in 1 2 ho u r t im e f or ma t . M in ut e s: 0 0 ~ 5 9 3 . EN D T hi s f ie ld is us ed to s e t t h e tim e y o u w is h t o s to p th e ti m er re co rd ing . T o c ha ng e th is , sim p ly us e th e Jog D ia l on th e D V R. Ho ur : 0 ~ 23 in 2 4 ho u r t i me fo r ma t ; 1~ 1 2 in 12 h o ...

  • EverFocus EDR 810 - page 63

    53 3 . 9 D i s k S e t u p M e n u Di ag ram 3 .1 7 D ia g ra m 3. 1 7 is a s cr e en sh o t o f th e DI S K SET U P ME NU . Th is me nu is fo r vi ew in g D is k in f or ma ti o n an d f or ma tt in g th e di s ks . F or in it i al se tu p or ma jo r se tu p ch a ng es w e re co mm e nd f or m at t in g t h e H a rd Di s k. I n t he DI SK S ET UP ...

  • EverFocus EDR 810 - page 64

    54 Note: System will ask you to stop rec ording if you try to delete the disk w hile still in the record mode. 3 . TH ER M OM ETR IC SC AL E Se le ct C ELS I U S o r FA HR EN H EI T fo r th e rm o m et ri c s ca le o f t h e d is k . 4 . NO Sh o ws th e h a r d d ri v e n um be r . Th e n umb er o f d isk s d is pl ay ed ma y va ry d e pe nd ing o ...

  • EverFocus EDR 810 - page 65

    55 3 . 1 0 C o nt r o l S e t u p M e n u Di ag ram 3 .1 8 D ia g ra m 3. 18 is a sc r e en sh ot of th e Co n tr o l Se t ti n g Me nu . T hi s me nu is to de fi n e th e se tti n g s fo r D VR re mo t e c on t ro l thr ou g h se ri al in te r fa ce in th e RS2 3 2 /R S48 5 m en u . T h e fo llo w in g fi e ld s a re d ef i ne d i n t h e Co n tr ...

  • EverFocus EDR 810 - page 66

    56 4 . RS 23 2 Da t a B it T hi s f ie ld is t he d a ta b it at wh ic h y o u w i ll be tr an s fe rr i ng . T he r e a r e t wo s et t in g s f or t h is op tio n : 8 o r 7 . T he de fa ul t i s s et to 8 . T o c ha n g e t hi s , si m pl y u se t h e Jo g Di a l o n th e DV R. R S4 85 : 1. RS485 Baud Rate This field is to set the spe ed at which ...

  • EverFocus EDR 810 - page 67

    57 3 . 1 1 W a r n i n g S e t u p M e n u D ia g ram 3 .1 9 D ia g ra m 3. 1 9 is a sc r e en sh o t of th e W ar ni ng Se tu p Me nu . Th is me nu is to se t th e wa r ni n g sy ste m se tti n g s. I f any cr it i ca l er ro r s oc cu r, th is po rt io n o f th e me nu d ir e c ts ho w th e sy ste m re ac ts . I n t he W ar n in g Se tu p M e n u ...

  • EverFocus EDR 810 - page 68

    58 5 . SE ND EM AI L: Y ES : Se n d a n em ai l w h en t he f an do e s n ot wo r k. N O: D o n o t se nd a n e ma il wh en t h e f a n do es n o t w or k . T he em a il se t ti ng s c a n b e s e t i n th e NE T WO R K S E TU P ME N U . 3. 1 1. 2 HD D T EM P I n HD D TE MP , w e d e fi ne : Di ag ram 3 .2 0 I n HD D TE MP , w e d e fi ne : 1 . BU ...

  • EverFocus EDR 810 - page 69

    59 4 . NE TW O RK A LA RM Y ES : T o e n ab le n e tw o rk a la r m. N O: To di s ab l e n et w or k al a rm . 5 . SE ND EM AI L Y ES : Se n d a n e ma il w he n H DD ’s t e mp e ra tur e is o ve rh ea te d. N O: W il l n ot s en d an em a i l w he n H D D ’s te mp er at u re i s ov er he at ed . T he em a il se t ti ng s c an be se t in t h e ...

  • EverFocus EDR 810 - page 70

    60 3. 1 1. 3 NO HD D I n N O HD D , we de fi ne : Di ag ram 3 .2 1 I n N O HD D , we de fi ne : 1 . BU Z Z ER : NO HD D bu zz e r. EN AB LE : T o e na bl e a b u zz er wh e n n o H D D i s de te ct e d . D IS AB L E: T o d i sa b le N O H D D b uz ze r . 2 . AL A RM OU TP U T T hi s w il l tr an sm i t a si g na l to an ot h er de vi ce . Th e se t ...

  • EverFocus EDR 810 - page 71

    61 5 . SE ND EM AI L: Y ES : Se n d a n em a il w he n n o H D D h a s b ee n fo u nd . N O: W il l n ot s en d an em a il w he n no HD D h a s be en f ou n d. T he em a il se t ti ng s c an be se t in t h e NE T WO R K S E TU P M EN U . 3. 1 1. 4 HD D F UL L I n HD D F UL L , w e d e fi n e: Di ag ram 3 .2 2 I n HD D F UL L , w e d e fi n e: 1 . B ...

  • EverFocus EDR 810 - page 72

    62 4 . NE TW O RK A LA RM : Y ES : T o e n ab le n e tw o rk a la r m. N O: To di s ab l e n et w or k al a rm . 5 . SE ND EM AI L: Y ES : Se n d a n em ai l w h en H D D is fu ll. N O: W il l n ot s en d an em a il w he n HD D i s f u ll . T he em a il se t ti ng s c an be se t in t h e NE T WO R K S E TU P M EN U . ...

  • EverFocus EDR 810 - page 73

    63 3 . 1 2 S y s t e m S e t up M e n u Di ag ram 3 .2 3 D ia g ra m 3. 23 is a sc re en sh ot of t he SY S T EM S ET UP M EN U . Th is me n u is fo r se tt in g up any a dd i ti on a l o pt io ns an d r e st or in g de fa ul t s to th e d i g it a l re co r de r . I n t he SY ST E M S ET U P M EN U th e f o ll o wi n g f ie ld s a re d ef i ne d: ...

  • EverFocus EDR 810 - page 74

    64 4 . UP DA TE SY ST E M S OF TW A RE : T u rn th e j o g to e n te r th e s e le c ti o n w in d o w. Y ES : P re ss S EL E CT o n YE S to u pd a te sy ste m so f tw a re f ro m U S B. N O: Pr e ss SE LE C T on N O to c an ce l u pd a ti n g . N ot e : Sy st e m w il l a sk y o u to st o p r ec or di n g i f y o u try t o up d at e w hi le sy st ...

  • EverFocus EDR 810 - page 75

    65 8 . P AS SW O RD a nd RI G H TS : Th e d if f er en t lo g i n p a ss wo rd s in d ic a te th e di f f e re nt le ve l of us e rs ; n o lo g in na m e is ne c e ss a ry . Ea c h nu m be r wi ll r ep la ce th e “ * ” si g n w he n the di g it is hi g h li g h te d . T ur n th e Jog to ch a ng e the se le c te d di g i t of th e pa ssw or d; p ...

  • EverFocus EDR 810 - page 76

    66 REC 4 . R e c o r d i n g O v e r v i e w B e fo re co n ti nu i ng wi th th e Re c o rd i ng Ov er v ie w ple as e b e su r e to ha v e re v ie w e d Ch a pt e r 3 , sp ec if i ca lly th e Ca m er a & Sc he du l e me nu s . Y ou ar e no w re ady to b eg i n se tti n g up the ma c hi ne fo r r ec or di n g . T hi s ch a pt e r wil l sho w y ...

  • EverFocus EDR 810 - page 77

    67 4 . 2 S c h e d u l e R e c o r d i ng S e tu p Se t up th e DA Y , STA RT tim e , EN D ti me an d th e n tur n S ET t o “ ON ” in th e SC HED UL E SET U P M EN U. Di ag ram 4 .1 Pl e a se re fe r to SC H ED U LE S ET UP M EN U f or s et ti n g p r oc ed ur e an d mo r e de ta il s. 4 . 3 E v e nt R e c o r d i n g S e t u p We wi l l no w d ...

  • EverFocus EDR 810 - page 78

    68 Di ag ra m 4 .2 2 . Wh e n the e ve n t i s s e t, e nt e r t he C AM ER A SE TU P ME N U to se t th e e v en t re c or d in g sp e e d ( I PS) o f th e ca me ra i n th e ti me pe ri od (T P ) se ct io n . Di ag ram 4 .3 3 . O n ce th e ev e n t an d re c or d a nd sp e e d ar e se t, y ou ne e d to ac tiv a te I ns ta n t Re co r di n g or se t ...

  • EverFocus EDR 810 - page 79

    69 N ot e : 1 . I f y ou wa nt to re co rd ev en t a c ti vi ty (m o ti on or a la rm ) O NL Y, s et th e no rm a l re c or d sp e ed as 0 I PS in th e C AM ER A SET U P M ENU . 2 . I f th e r ec or di ng sp e ed is c ha n g e d wh i le th e ma ch in e is re c or di ng , th e ne w re co r di ng sp e e d wi ll no t ta ke e ff ec t u n ti l r ec or d ...

  • EverFocus EDR 810 - page 80

    70 5 . P l a y b a c k O v e r v i e w B e fo re co n ti nu i ng pl e as e be su re t o ha v e re vi ew ed D VR Me nu Se t up (C ha pt e r 3) a nd Re co rd in g Se tup (C h ap te r 4) . Yo u ar e no w re a dy to be gi n se tt i ng up th e DV R fo r pl ay ba c k. Th is ch a pt e r wi l l sh ow y ou h o w t o se tu p th e r ec or de r fo r b a si c p ...

  • EverFocus EDR 810 - page 81

    71 (4) Slow Forward/Re verse Playback During pla ybac k mode, press PAU SE key to freeze the playing back picture . Turn the Shuttle dial clockwise to begin slow forward playbac k. Turn the Shuttle dial counterclock wise to begin slow reverse playback. The speed w ill show on the status bar of the bottom screen. The availa ble speeds are 1/2, 1/4, ...

  • EverFocus EDR 810 - page 82

    72 Di ag ram 5 .1 (1) TIME / DATE Sear ch Playback The SEARCH MENU will show up after pressing SEARCH key. Select “BY TIME / DATE”, and then select the start date/time you want t o search. Then, select the camera number and Disk Number to be sear ched. Lastly, press SELECT or the tilt whe el of mouse to start searc h. Note: If there is no video ...

  • EverFocus EDR 810 - page 83

    73 (2) EVENT Search P layback To search by “EVENT”, select “BY EVENT” for Method. Set the Start and En d Date/Time limits for the events to be sea rched. Choose from 7 search filters: ALARM, MOTION, VLOSS, A/M, A/V, M /V and A/M /V The indications of each filter are shown below. T he n , s el e c t Ca me ra n um be r an d Di sk n um be r fo ...

  • EverFocus EDR 810 - page 84

    74 T he ev en t ty pe s a n d n um b er sh ow o n t he s ec on d c ol u mn of th e s e ar ch l i st . An : an Alarm e vent, n = the alar m number. Dn : HDD overh eated, n = drive number . Fn : Fan fa il, n = 1~3 fan number. LH : (Logic al Head): b eginning of recor ding (earliest recorded da te) LUn : L ocal User login, n = 1~3 ; where 1 is Adminis ...

  • EverFocus EDR 810 - page 85

    75 6 . C o p y i n g V i d e o B e fo re co n ti nu ing p le a se be s ur e t o ha ve re vi ew e d th e p re c e di ng ch a pt e rs . Y ou a r e no w re ady to co py a n i ma g e o r v i de o f ro m t he D V R. Th i s c ha p te r wi ll s ho w y ou h o w t o c op y a sti ll i m ag e o r m ov ie fr om th e re c o rd e r. I n se rt th e U S B p oc ke ...

  • EverFocus EDR 810 - page 86

    76 Di ag ram 6 .1 I n t he CO P Y M EN U , we de f in e : 1 . CO P Y Se le ct I m ag e fo r c o py ing i m ag es /v ide o to m o vi e f ile . Se le ct V ie we r f or c o py in g D VR Vi e we r pl ay er . 2 . DI SK N O D is k n um b er y ou w i sh t o c o py f ro m . 3 . CA M ER A NO Ca me ra c ha nn el nu m be r . Yo u ca n s e le ct a n i nd iv id ...

  • EverFocus EDR 810 - page 87

    77 6 . DE V IC E T he me d ia y ou w an t t o s to r e t he f il e t o. A ft e r c h oo si n g c opy s et ti n g s, pr e ss SEL E CT o r th e t il t wh ee l o f t he mo u se t o b e g in c opy . 1 . E ve ry 30 -m in u te s o f da ta w il l b e sa ve d a s o ne f i le . H o we ve r , if th i s f il e siz e e xc ee ds 2 G , D VR w il l au to ma t ic ...

  • EverFocus EDR 810 - page 88

    78 7 . C a l l O v e r v i e w This chapter will give you basic details on how to setup the CALL MENU on the DVR. Press the CALL key and the C ALL MENU w ill pop up as below. Diagram 7.1 In CALL M ENU, you can do the f ollowing settings for the selecte d monitor: 1. SEQ: Sequence displa y on the call monitor. Press SEQ key or Middle wheel of mouse ...

  • EverFocus EDR 810 - page 89

    79 Diagram 7.2 Dial jog to set sequence dwell time for each camera on matrix monitor 1~4. Sequence dwell time can be se t from 00 to 99 seconds. Press Enter/Call key to go next/previous se lection. ...

  • EverFocus EDR 810 - page 90

    80 8 . S c r e e n D i s p l a y S e t t i n g & M o d e In a full scree n displa y , press SEL ECT key to pop up the display a djustment window as below: Di ag ram 8 .1 I n t he s cr e en di s pl ay s e tt in g me n u, we d ef ine : 1 . CA M ER A: Th e c ur re n t ca m er a. ( c an n ot be ch an ge d) 2 . BR IG HT NE S S: T h e b ri g ht ne ss ...

  • EverFocus EDR 810 - page 91

    81 Wh e n SHA RP NE SS i s O FF , th e i ma g e b ec ome s b lu r re d in a n ind o or en v ir o nm e nt . H ow ev er , th i s se t ti n g is su ita ble fo r o ut do or us e . I f im ag e fli c ke r s fr o m a br ig ht , ou td oo r en v ir o nm e nt , th i s c an be r e du ce d by tu rn in g S HA RPN ES S O F F . T he se le ct ed it e m wi ll sh ow ...

  • EverFocus EDR 810 - page 92

    82 8 . 1 M o d e B u t t o n Pr es s MO D E to s w it c h 4 , 7 , 9 , 1 0, 13 , 16 an d PI P (p ic tu re in pi c tu r e ) d is p la y s f or Li v e an d P lay ba ck mo de . ...

  • EverFocus EDR 810 - page 93

    83 9 . F i r m w a r e U p g r a d e This chapter will give you detailed i nstruction on how to up grade the DVR ’s software. You can check the System Menu for the current firmware version. Please check our website (http://www.eve rfocus.com/support_bulletins.asp ) for the la test firmware updates. 1. Copy the .ET W file to your USB pocket drive ...

  • EverFocus EDR 810 - page 94

    84 1 0 . N e t w o r k i n g O v e r v i e w This chapter will try to give you a de tailed instruction on how to network the DVR. Before we begin th e process of networking your di gital recorder we should have a working knowledge of what a netw ork is and how it works. This will be a helpful in co mpleting the networking proce ss. 1 0 . 1 I nt r o ...

  • EverFocus EDR 810 - page 95

    85 identify a host or computer on the L AN which assigns the IP addresses to your network. For example, a Linksys router has an IP address of 192.168.1.1. If you were using t his t ype of router within yo ur LAN, then your gateway would be th e IP address of the Linksys router. The reason this would be y our gateway is because the Links y s is assi ...

  • EverFocus EDR 810 - page 96

    86  Note: Everfocus suggests having a minimum upload speed of 256KBps. This can be addre ssed by the Internet Service Prov ider. Who is yo ur Internet provider? ______________  Please confirm that your internet service p rovider that our upload speed is at least 256KBps. What ty pe of modem/router do you have? ______________ Modem/route r mod ...

  • EverFocus EDR 810 - page 97

    87 1 0 . 6 W h a t T y p e o f N e t w o r k C o n n e c t i o n d o y ou h a v e ? Everfocus D VR’s can operate using three dist inct types of networking connections. 1. Simple One to One Connection: A simple one to one connection is the most simple network connection. Basically it is a connection betwee n a Computer and Another Computer or in t ...

  • EverFocus EDR 810 - page 98

    88 Diagram 10.1 Connection P rocedure:  The First step is to purchase or make a cross over cable. We recommend purchasing on e if you have never made a cross ove r cable. Pl ease remember you can not use a straight through network cable for this application  Once you have a cross over cable plu g one end into t he L AN port on the back of the ...

  • EverFocus EDR 810 - page 99

    89 ...

  • EverFocus EDR 810 - page 100

    90 ...

  • EverFocus EDR 810 - page 101

    91 ...

  • EverFocus EDR 810 - page 102

    92  Once you have reached this point click ok and restart both the computer and the digital recorder.  To access the DVR from the computer simply open Internet Ex plorer and in the address bar type: http://192.168.1.3 ...

  • EverFocus EDR 810 - page 103

    93 A ct iv e X A ct i ve X i s a c omp on en t f ro m Mi c ro sof t t ha t e n ab le s i n te ra c ti ve co n te n t fo r a we b s it e . Wi th A c ti v eX , We b pa g e s ar e ab le to in c lu d e mu lt i me d ia , in te ra c ti ve pr og r am s , an d so ph is ti ca te d ap pl i ca tio n s th a t g iv e us e r th e sa m e ex pe ri e nc e as a hi g ...

  • EverFocus EDR 810 - page 104

    94 ...

  • EverFocus EDR 810 - page 105

    95  O nc e i n C U ST O M L EV EL , Sc r ol l d ow n to A CT I VE X C ON T RO L S A ND PL UG -I NS . S e t th e F ol lo w in g Se tt i ng s:  D ow n lo a d Sig ne d Ac t iv e X co nt r ol s : Pr omp t  Ru n Ac ti v eX c on t ro ls an d pl u g -i ns : E na b le  Sc ri pt Ac ti v eX co n t ro l s Ma rk ed s af e f or sc rip tin g : : E na ...

  • EverFocus EDR 810 - page 106

    96 1 0 . 8 D ir e c t H i g h S p e e d M o de m C on n e c t i o n Straight Through Ether net Cable Pin outs: The Diagram be low shows the pin configurations for a stra ight cable. Diagram 10.2 Connection P rocedure:  The First step is to purchase or make a straight throug h cable. We recommend purchasing one if you have n ever made a straight ...

  • EverFocus EDR 810 - page 107

    97  Now Log into the Everfocus DVR menu and using the jo g dial from the previous chapter go to the Networ k Setting Menu.  Assign the Static IP address which yo u obtained f rom th e internet service provider to the DVR, the Subnet mask from the internet service provider to the DVR, and the default gateway o f the internet service provider. ...

  • EverFocus EDR 810 - page 108

    98 1 0 . 9 R o ut e r o r L A N C o n n e c t i o n Straight Through Ether net Cable Pin outs: The Diagram be low shows the pin configurations for a straight cable. Diagram 10.3 Connection P rocedure:  The First step is to purchase or make a straight through cable. We recommend pur chasing one if you have n ever made a straight through cable. Pl ...

  • EverFocus EDR 810 - page 109

    99  Once you have a straight t hrough cable plug one end into the LAN port on the back of the recorder and the other into the router.  Now Log into the Everfocus DVR menu and using the jo g dial from the previous chapter go to the Networ k Setting Me nu.  If you have a Linksys Route r:  Assign an IP address of 192.168.001.050 to the DVR ...

  • EverFocus EDR 810 - page 110

    100  Note: Make sure the modem is in bridge m ode. If your Internet Service Provider is BellSouth you may have a m odem/router. BellSouth provides a Westell modem that includes a built- in router. You will nee d to disable the router functionality.  The next step is to open ports within your router. Open virtual ports in th e router (Log into ...

  • EverFocus EDR 810 - page 111

    101 1 1 . L i n k s y s P o r t F o r w a r d i n g This chapter will cover a few simple configurations for the Linksys router. Please understand we do not support this product and will not give tech support on it. If you need Technical support on this router you must call Linksys. This Chapter is to offer some help to the installer and end user no ...

  • EverFocus EDR 810 - page 112

    102 The Applications and Gaming Tab allows you to set up public se rvices on your network, such as web se rvers, ftp servers, e-mail se rvers, or other specialized Internet app lications. (Specialized Internet applications are any applications that use Internet a ccess to perform functions such as videoconfere ncing o r online gaming. Some Internet ...

  • EverFocus EDR 810 - page 113

    103 Application - In this field, enter the name you wish to give the application. Each name can be up to 12 cha racters. Start/End - This is the port range. Enter the number that starts the port range under Start and the number that ends the range under End . Protocol - Enter the protocol used for this applic ation, either TCP or UDP , or B oth . I ...

  • EverFocus EDR 810 - page 114

    104 Example: ( Here we open ports for up to 10 clients) DVR 80 to 80 Both 192.168.1.50 Enable DVR 1600 to 1610 Both 192.168.1.50 Enable DVR 37260 to 37270 Both 192.168.1.50 Enable  Note: If your Internet service pro vider blocks port 80 and you are usin g a different port to access the DVR through the D VR’s Network Menu Setup please open thos ...

  • EverFocus EDR 810 - page 115

    105 1 2 . D - L i n k P o r t F o r w a r d i n g This chapter will cover a few simple configurations for the D -Link router. Please understand we do not support this product and will not give tech support on it. I f you need Technical support on this router you must call D-Link. This Chapter is to offer some help to th e installer and end user not ...

  • EverFocus EDR 810 - page 116

    106 Example: Firewall - Select Enable d or Disabled Name - Enter the name referenc ing the virtual service Action – Either Allow or Disallow its use. Source - The s erver computer in the WAN (Wide Area Network) that w ill be providin g the virtual service s. If you have a Web server that you wanted Internet use rs to access at all times, you wo u ...

  • EverFocus EDR 810 - page 117

    107 times, y ou would need to enable it. Web (HTTP) server is on LA N (Local Area Network) computer 192.168 .1.10 HTTP uses port 80, TCP and UDP. Protocol Type - The pro tocol used for the virtual service. Public Ports - The port number on the WAN (Wide Area Network) side that will be used to access the virtua l service. Schedule - The schedule of ...

  • EverFocus EDR 810 - page 118

    108 1 3 . E v e r F o c u s D D N S S e t u p Note : You MUST have firmware ve rsion 1.6.2 or higher in order to use the EverFocu s DDNS server.  Set up the Networ k Menu according to the instru ctions detailed in the Networking chapter.  Go to the website http://everf ocusddns.com and c heck for an available name.  In DVR’s Network M en ...

  • EverFocus EDR 810 - page 119

    109  Press the Select button to synchronize the DVR with the DDNS server. You should see the word “Success” at the b ottom of the screen. If you see “Could Not Find Server” instead , double check your network setting s until you get “Success”.  You should now be a ble to connect by typing in the host na me y ou created. Example: h ...

  • EverFocus EDR 810 - page 120

    110 1 4 . V i e w i n g t h r o u g h I n t e r n e t E x p l o r e r To access the DVR from a computer simpl y op en Internet Explorer and in the address bar type: http:// (LAN or IP address of your internet service provider)  The digita l video login page will appear on the scre en similar to the one shown above.  User must enter a user nam ...

  • EverFocus EDR 810 - page 121

    111  Installing A ctiveX controls When you first connect to the DVR’s IP address , you will see a pop- up alert. Click OK t o close the window. After a few seconds, you should s ee a screen like the one below. If you do not see a yellow bar like the one the arrow is pointing at, your security settings may be too high. If so , go to the section ...

  • EverFocus EDR 810 - page 122

    112 Install the MP4D VR file when prompted to do so. Type in the username and password and click Login to view the cameras. Default username: admin Default password: 11111111 ...

  • EverFocus EDR 810 - page 123

    113  Enabling ActiveX Controls Note: This section is onl y necessary if you DO NOT se e the yellow ActiveX ba r at the top of your browser screen. At the top of the Intern et Explorer Window, click o n Tools, then select In ternet Options. Click the Security tab at th e top of the window, then choose Custom Level near the bottom. ...

  • EverFocus EDR 810 - page 124

    114 In the Security Settings wi ndow, scroll to “ActiveX controls and plug-ins” Set the controls as follo ws: “ Enable ”:  Allow previously unused ActiveX controls to run wit hout prompt ( Internet Explorer 7 o nly )  Allow scriptlets ( I E7 only )  Automatic prompting for ActiveX controls  Binary and script behaviors  Displa ...

  • EverFocus EDR 810 - page 125

    115 Close the window so you are back at the DVR Viewer screen. Click the Refresh button t o reload the page. Install the MP4D VR file when prompted to do so. Type in the username and password and click Login to view the c ameras. Default username: admin Default password: 11111111 . ...

  • EverFocus EDR 810 - page 126

    116 The above diagram is the main screen display. The icons on the lower corner of the screen are mainly f or control and configuration; those on the right side are for status i ndication. If any icon is gra yed , it means that the specific function is not accessible in the current mode. The following s are a brief description for eac h of t he ico ...

  • EverFocus EDR 810 - page 127

    117 7. There are two methods of searching past video: by Event and by Ti me. 8. Type s of events to be searched: Alarm , Motion and/or Vloss . 9. All available events are shown in the list. Click the desire d event to highlight it. 10. Click on “ P lay ” to play back highligh ted video event. 11. Press “ Update ” to ref resh the event list. ...

  • EverFocus EDR 810 - page 128

    118 20. Event Descr iption: By clicking on the ○ ? sign, an event de scription list will show up as follow: 21. Recor d: Press the button to remotely activate the DVR’ s record function . Pr ess again to stop recording. 22. Audio: This function allows you to tr ansmit audio from DVR to your PC’s remote site. Select audio source 1/2/3/4, or ? ...

  • EverFocus EDR 810 - page 129

    119 1 4 . 1 S e a r c h 14 . 1. 1 Se ar c h b y T IM E There are 3 wa ys to do searc h b y time. Press Pick a date first. 1. Press the M button to change the Month to be searche d, D for da y , h for hour, m for minute and s for second. The butt ons on the left- hand si de are to decrease the value, whereas those on the righ t-hand side are to incr ...

  • EverFocus EDR 810 - page 130

    120 14 . 1. 2 Se ar c h by EV EN T 1. Select Event Typ e from Alarm , Mot ion and Vlos s . Note: Ple ase keep at least one event type c hecked. 2. Select the Disk No. from which y ou would like to search events. 3. Press Update button to r efresh the event list. 4. All events of the selected ty pe will be displaying along with Date/Time, event type ...

  • EverFocus EDR 810 - page 131

    121 1 4 . 2 P T Z c o n t r o l 1. Select the PTZ camera from drop-dow n menu. 2. Select Action Mode y ou want to use. There are 4 options available: Continuous , Step x10 , Step x5 and Step x1 . 3. Use Direction Arrows (up, down, le ft, right) t o move/adjust the focus to your desired direction and a ngle. 4. Press Z+ for Zooming In or Z- for Zoom ...

  • EverFocus EDR 810 - page 132

    122 1 4 . 3 R e m o t e A r c hi v e To Archive files: 1. Select Disk No .: The hard drive you want to a rchive from 2. Disk Storage Tim e: Start Time/End Time indicates the start and end time of the se lected disk 3. Camer a: Select the camera that you wish to archive from. 4. Start: Selec t the start time of the archived video. 5. End: Select the ...

  • EverFocus EDR 810 - page 133

    123 2) Move the slide bar between the buttons to change Month, Day, H our, Mi nute, and sec ond to be searche d. Move the slide bar to the left to decrea se the value, or to the right to increase the value. 3) Enter Month, Day , Hour, Minute, and second direc tly in displa y bar. 4) Press OK to select time. 6. Press ARCHIVE button to start archivin ...

  • EverFocus EDR 810 - page 134

    124 2. Select “ Run ” or “ Save ” the file. 3. Open the DVRViewe r.exe for loading the archived EDR MPEG4 F iles (.arv) ...

  • EverFocus EDR 810 - page 135

    125 Detailed e xplanation of DVRViewer is as follows: i. Load File : to loa d the archived EDR MPEG4 F iles (.arv). ii. Stop : to stop play ing video. iii. Play : to play video. iv. <<Step : step bac kward after pausing. v. Pause : to pa use playing. vi. Step>> : step for ward after paus ing. vii. Capture : to ca pture the current image ...

  • EverFocus EDR 810 - page 136

    126 1 4 . 4 R e m o t e C o n fi gu r a t i on Click on the “CONFI G” tab to open a page where you can remote l y c hange the DVR’s settings. Click on each option to go to the settings for tha t page. When you f inish making changes on a screen, press Apply to save the settings. Press Reset to display the DVR’s c urrent menu settings. The s ...

  • EverFocus EDR 810 - page 137

    127 DATE/TIME setup menu Set Date/Time Ma nuall y 1. Click on the ca lendar button to set Date/Time manually . A calendar will show u p as shown below. 2. Click “<<” to decrease Year value, “>>” to increase Year value. 3. Click “<” to de crease Month value, “>” to increase Month value. 4. Click on the selec ted dat ...

  • EverFocus EDR 810 - page 138

    128 CAMERA setup me nu RECORD setup me nu ALARM setup me nu ...

  • EverFocus EDR 810 - page 139

    129 MOTION setup menu Set Motion Grid 1. Non-green squ ares are disabled for motion; gre en squares are enabled. 2. Click and hold the mouse to begin selecting squares in the motion grid. 3. Drag the mou se to highlight the desired area . 4. The selec ted area will switch to the opposite colo r. 5. Click Apply to save the c hanges. VIDEO LO SS setu ...

  • EverFocus EDR 810 - page 140

    130 NETWORK 1 se tup menu The Networ k Configuration Settings can not be changed remotely. These must be changed in the DVR’s Network Menu. NETWORK 2 se tup menu After saving changes to the account, pa ssword, or level, the changes w ill take effect the next time y ou log in to the network viewer. ...

  • EverFocus EDR 810 - page 141

    131 SCHEDUL E setup menu CONTROL setup menu ...

  • EverFocus EDR 810 - page 142

    132 WARNING setup menu SYSTEM setup men u All recording should be stopped be fore making any change s on this menu. Update F i rmware 1. After clic king Apply , an “Open File” windo w appears. 2. Find the folde r where the firmware upgrade is saved and c hoose Open. 3. On the DVR’s monitor , you will see a notice that the firmwa re is being u ...

  • EverFocus EDR 810 - page 143

    133 1 5 . I n t e r f a c e S p e c i f i c a t i o n s RS485 This Digital Video Reco rder may be controlled by a c omputer or control keyboard (EKB500) via the RS485 interface. Pin definition of RS-485 conne ctor on DVR back panel is shown in the followin g picture. 1 5 . 1 T r a n s m i ss i o n S e t t i n g There a re 6 different speeds that ca ...

  • EverFocus EDR 810 - page 144

    134 1 5 . 2 R e m o t e C o n t r o l P r o t oc o l A computer can b e used to control the DVR by sending the packet as follows. == = == == === = == == = == === = = == == = == = == == = == == == == == == == = == == = = ED R 16 40 / 16 2 0/ 9 20 48 5 C on t ro l C o de Pro t oc o l == = == == === = == == = == === = = == == = == = == == = == == == = ...

  • EverFocus EDR 810 - page 145

    135 0x 4B ( O Pc od e = k ey ) 0x 0 B (D A TA 1 = "P l ay " ke y co de ) 0x 5 9 (c h e ck s um ) 2- 1. The fo rm at of m ess age p a ck e t is as f ol l ow s: L en g th B y t e ( Pr e fi x : 0 x8 6, 0x 87 , or 0x 88 .. .. . ) Re c ei v er I D h i gh b y t e Re c ei v er I D l ow b y te Op c od e B y te Da t a By te 1 Da t a By te 2 Da t a ...

  • EverFocus EDR 810 - page 146

    136 1 00 000 00 0 00 0 00 1 00 01 ID = 1 2 00 000 00 0 00 0 01 0 00 02 ID = 2 .. . . 12 6 0 00 0 00 0 1 11 111 0 00 7e I D = 1 2 6 12 7 0 00 0 00 0 1 11 111 1 00 7f ID = 1 27 12 8 0 00 0 00 1 0 00 000 0 01 00 ID = 1 28 12 9 0 00 0 00 1 0 00 000 1 01 01 ID = 1 29 25 5 0 00 0 0 01 1 11 11 11 01 7 f I D = 2 55 25 6 0 00 0 01 0 0 00 000 0 02 00 ID = 2 ...

  • EverFocus EDR 810 - page 147

    137 - - -- -- - -- --- - --- --- --- --- --- --- - -- - -- - 0x 4 B Ke y cod e A rem ot e k ey pr es se d - - -- -- - -- - -- - -- - -- -- - -- -- --- --- --- - -- - -- - - 2- 4- 1. A re m ote k ey pr es sed ( O Pc o de =0 x 4B ) - - -- -- - -- - -- - -- - -- -- - -- -- --- --- Da t a1 Ke y - - -- -- - -- --- --- --- --- --- --- -- 0x 0 0 C H1 0x 0 ...

  • EverFocus EDR 810 - page 148

    138 0x 1f JO G > 0x 2c SE L EC T 0x 2 0 C H5 0x 2d C AL L 0x 21 C H 6 0x 2e EN TER 0x 2 2 C H7 0x 2f (r es erv ed ) 0x 23 C H 8 0x 30 (r e s er ve d) 0x 2 4 C H9 0x 31 (r e se rv ed ) 0x 2 5 C H 10 0x 32 (r e se rv ed ) 0x 2 6 C H 11 0x 33 (r e se rv ed ) 0x 2 7 C H 12 0x 34 (r e se rv ed ) 0x 2 8 C H 13 - - -- -- - -- - -- - -- - -- - -- - -- - ...

  • EverFocus EDR 810 - page 149

    139 A p p e n d i x A : R e m o t e C o n t r o l The remote controller (RC200, Diagram A1) is an accessor y to enhance the handy o perations of the DVR. You ca n perform all the settings and operations by the remote controller. The effective distan ces are up to10 meters without any obstacle. The keypad f unctions are same as the front pane l ke y ...

  • EverFocus EDR 810 - page 150

    140 A p p e n d i x B : M o u s e I n s t a l l a t i o n T o u se a P S 2 mo us e w i th t he DV R s i mp ly tu rn o ff t h e D VR fi r st . Th en pl u g in a P S2 Opt ic al mo u se wi t h Sc r ol l Wh e e l to th e PS 2 Mo use po r t on th e ba ck o f th e DV R . Wh e n y ou po we r th e DV R ba c k u p th e mo u se wi l l h a ve be e n l oa de d ...

  • EverFocus EDR 810 - page 151

    141 o pt io n a n e w me n u wi l l a pp e a r. F or ex a mp le Di a g ra m B 2 sh o ws a n e xa mpl e o f a n e w m en u o nc e y o u h av e c lic ke d o k f or th e me n u. D ia g ra m B 2 ...

  • EverFocus EDR 810 - page 152

    142 F ro m t h is m e n u y ou c a n lef t c l ic k o n a ny o n e o f t he m en u t o s e le c t t ha t m e nu . D ia g ra m B 3 T o go ba ck to y ou r ma i n sc re en fr o m he re si mp ly c li c k on th e B ac k ar ro w lo ca te d on th e to p r ig ht h an d o f t h is s c r ee n. ...

  • EverFocus EDR 810 - page 153

    143 A p p e n d i x C : A l a r m B o a r d C o n f i g u r a t i o n A p p e n d i x C ...

  • EverFocus EDR 810 - page 154

    144 A p p e n d i x D : L a p s e M o d e R e c o r d i n g T a b l e EDR164 0 – D1 mode l A p p e n d i x D NTSC Unit: Hour PICTURE QUALITY (KB) LOWER LOW BASIC STANDARD HIGH SUPERIOR simple complex simple complex simple complex simple complex simple complex simple complex Recording Speed (IPS) 8.04 12.33 8.42 13.7 10.15 16.72 11.86 19.56 14.72 ...

  • EverFocus EDR 810 - page 155

    145 EDR1640 – Half D1 model EDR164 0 – CIF model NTSC Unit: Hour PICTURE QUALITY (KB) LOWER LOW BASIC STANDARD HIGH SUPERIOR simple complex simple complex simple complex simple complex simple complex simple complex Recording Speed (IPS) 3.53 7.82 3.87 8.36 4.21 8.9 4.92 9.54 5.62 10.17 6.41 12.89 240 81.97 37.00 74.77 34.61 68.73 32.51 58.81 30 ...

  • EverFocus EDR 810 - page 156

    146 E DR 16 2 0/ 92 0 – D 1 mo d el NTSC Unit: Hour PICTURE QUALITY (KB) LOWER LOW BASIC STANDARD HIGH SUPERIOR simple complex simple complex simple complex simple complex simple complex simple complex Recording Speed (IPS) 1.76 4.56 1.87 4.87 1.97 5.46 2.38 6.51 2.67 7.08 3.63 9.02 480 82.2 31.73 77.37 29.71 73.44 26.50 60.79 22.22 54.19 20.43 3 ...

  • EverFocus EDR 810 - page 157

    147 NTSC Unit: Hour PICTURE QUALITY (KB) LOWER LOW BASIC STANDARD HIGH SUPERIOR simple complex simple complex simple complex simple complex simple complex simple complex Recording Speed (IPS) 8.04 12.33 8.42 13.7 10.15 16.72 11.86 19.56 14.72 24.63 18.6 30.05 60 144 93.87 137.46 84.48 114.03 69.22 97.59 59.17 78.63 46.99 62.23 38.52 48 179.9 117.34 ...

  • EverFocus EDR 810 - page 158

    148 E DR 16 2 0/ 92 0 – H a lf D 1 mod el NTSC Unit: Hour PICTURE QUALITY (KB) LOWER LOW BASIC STANDARD HIGH SUPERIOR simple complex simple complex simple complex simple complex simple complex simple complex Recording Speed (IPS) 3.53 7.82 3.87 8.36 4.21 8.9 4.92 9.54 5.62 10.17 6.41 12.89 120 163.9 74.00 149.54 69.22 137.46 65.02 117.62 60.66 10 ...

  • EverFocus EDR 810 - page 159

    149 E DR 16 2 0/ 92 0 – C IF mo de l NTSC Unit: Hour PICTURE QUALITY (KB) LOWER LOW BASIC STANDARD HIGH SUPERIOR simple complex simple complex simple complex simple complex simple complex simple complex Recording Speed (IPS) 1.76 4.56 1.87 4.87 1.97 5.46 2.38 6.51 2.67 7.08 3.63 9.02 240 164.4 63.45 154.73 59.42 146.88 52.99 121.58 44.45 108.37 4 ...

  • EverFocus EDR 810 - page 160

    150 N ot e : T he ab o ve re co r di ng ta b le s a r e c a lc ul a te d ba se d o n 25 0 G B o f sy st em st or ag e . T er ms of Use The HDD size required in yo ur DVR may vary from this calcula ted test resul t under some cond itions. Total storage capa city may vary depending on complex ity of video scen es, DVR specifi cations and featur es us ...

  • EverFocus EDR 810 - page 161

    151 T r o u b l e s h o o t i n g If y ou have difficult y operating your system, run through the following checklist to see if y ou c an solve the pr oble m.  The DVR will not go into r ecord mode?  Make sure the HDD is locke d in with the ke ys. Also check to make sure the hard drives are set to Master. A diagram located on the Hard Drive L ...

  • EverFocus EDR 810 - page 162

    EverFoc us Electronics Corp. Head Office: 12F, No.79 Sec . 1 Shin-Tai Wu Road, Hsi-Chih, Taipei, T aiwan TEL: + 886-2-26982334 FAX: +886- 2-26982380 www.everfoc us.com.tw USA Office: 1801 Highla nd Ave. Unit A Duarte, CA 910 10, U.S.A. TEL: + 1-626-844-8888 FAX: +1-62 6-844-8838 www.everfoc us.com USA N.Y. Office: 415 Oser Ave nue Unit S Hauppaug e ...

Manufacturer EverFocus Category DVR

Documents that we receive from a manufacturer of a EverFocus EDR 810 can be divided into several groups. They are, among others:
- EverFocus technical drawings
- EDR 810 manuals
- EverFocus product data sheets
- information booklets
- or energy labels EverFocus EDR 810
All of them are important, but the most important information from the point of view of use of the device are in the user manual EverFocus EDR 810.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals EverFocus EDR 810, service manual, brief instructions and user manuals EverFocus EDR 810. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product EverFocus EDR 810.

Similar manuals

A complete manual for the device EverFocus EDR 810, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use EverFocus EDR 810 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of EverFocus EDR 810.

A complete EverFocus manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual EverFocus EDR 810 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the EverFocus EDR 810, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the EverFocus EDR 810, that we can find in the current document
3. Tips how to use the basic functions of the device EverFocus EDR 810 - which should help us in our first steps of using EverFocus EDR 810
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with EverFocus EDR 810
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of EverFocus EDR 810 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning EverFocus EDR 810?

Use the form below

If you did not solve your problem by using a manual EverFocus EDR 810, ask a question using the form below. If a user had a similar problem with EverFocus EDR 810 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)