English dropdown-ico

Manual Technics sx-PR604/M

148 pages 5.86 mb
Download

Go to site of 148

Summary
  • Technics sx-PR604/M - page 1

    QQTG0665 ENGLISH SX- PR604/M SX- PR804/M DIGITAL ENSEMBLE Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. Operating Instructions This manual was print e with soy based ink. ...

  • Technics sx-PR604/M - page 2

    (For United Kingdom) (For the type as show n in figures A and B) For y our safety , plea se read the foll owi ng text care-fully. This appl ianc e is s uppli ed wit h a moul ded th ree pin m ains p lug for your safe ty and c onveni ence. A 5-am pere fuse is fitt ed in this pl ug. Sho uld the fuse ne ed to be r eplaced pl ease ensu re tha t the rep ...

  • Technics sx-PR604/M - page 3

    CAUTI ON: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUAL IFIED SERVICE PERSONNEL. The l ight ning f las h wit h arrow head sym bol, wit hin a n e quilat eral tri - angle , is int ended t o alert the use r to t he pres ence of un insu lated “ danger ous volt age ” wi thin the ...

  • Technics sx-PR604/M - page 4

    4 QQTG0665 ...

  • Technics sx-PR604/M - page 5

    5 QQTG0665 ...

  • Technics sx-PR604/M - page 6

    Read t hese op eratin g instr ucti ons caref ully befo re usin g the uni t. Foll ow the saf ety inst ruct ions on t he unit and the sa fety p recaut ions list ed belo w. K eep thes e oper ating ins truct ions handy f or fut ure re ference. 1. Power Source — Connect the un it to a powe r sour ce of t he type describ ed in the se inst ruct ions or ...

  • Technics sx-PR604/M - page 7

    Caut ions fo r safest use of thi s unit Installati on location 1. A well-ventilated place. Take care not to use this unit in a place w here i t will not receive sufficient vent ilation, and not to permit the ventilation hol es to be covered by cur- tains, or any sim ilar materials. 2. Place away from direct sunl ight and excessive heat from heating ...

  • Technics sx-PR604/M - page 8

    Co ntents Caution s for safest us e of this unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Con trols and func tion s (PR6 04) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 0 Con trols and func tion ...

  • Technics sx-PR604/M - page 9

    Cr e at e a c o mp le te l y ne w r hy th m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 6 Ch o rd Mo d ify Ch a ng e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Pa r t Se t tin g . . . . . . . . . . . . ...

  • Technics sx-PR604/M - page 10

    Contr ols an d functions (P R6 04) Tuning Unlik e an acou sti c piano, you r PR Seri es Di gital Ensembl e ne ver nee ds tuni ng. The pit ch o f this in stru ment c an be adj usted f or wh en playi ng al ong wit h oth er ins trume nts. (R efer to page 107.) About the backup memory The s ettings a nd mem ories are mai ntai ned for a pproxi mat ely 8 ...

  • Technics sx-PR604/M - page 11

    SAX & WOODWIND ORGAN & ACCORDION SOUND EXPLORER BRASS SYNTH MIXTURES MULTI EFFECT CHORUS REVERB PLAY EASY REC SET NEXT BANK BANK VIEW PROGRAM MENUS DISK LOAD CHORD STEP REC DISK IN USE SOLO TECHNI-CHORD DIGITAL EFFECT BRILLIANCE STRINGS TRANSPOSE R1/R2 OCTAVE – PART SELECT CONDUCTOR PANEL MEMORY LEFT RIGHT 2 RIGHT 1 LEFT RIGHT 2 RIGHT 1 + ...

  • Technics sx-PR604/M - page 12

    Control s and f unctions (PR804) FA VORI T ES Fas hion a cus tomi zed di splay in whi ch al l you r fav orite soun ds, rhy thms and styl es are assem bled. ( Refe r to page 33.) DEMO SPLIT POINT MAIN VOLUME APC/SEQUENCER VOLUME MODE CHORD FINDER OFF/ON AUTO SETTING BANK STOP 8&16 BEAT ROCK & POP BALLAD JAZZ & SWING MOVIE & SHOW SOUN ...

  • Technics sx-PR604/M - page 13

    SAX & WOODWIND ORGAN & ACCORDION SOUND EXPLORER BRASS SYNTH SOLOIST MULTI EFFECT CHORUS REVERB PLAY EASY REC SET NEXT BANK BANK VIEW PROGRAM MENUS DISK LOAD CHORD STEP REC DISK IN USE SOLO TECHNI-CHORD DIGITAL EFFECT BRILLIANCE STRINGS TRANSPOSE R1/R2 OCTAVE – PART SELECT CONDUCTOR PANEL MEMORY LEFT RIGHT 2 RIGHT 1 LEFT RIGHT 2 RIGHT 1 + ...

  • Technics sx-PR604/M - page 14

    Getting started 1 Pl ug the p ower co rd in to an ou tlet. 2 Press the POWER button t o turn it on. • The p owe r in dicat or in the le ft f ron t of the bo dy is lit. 3 Touch a ny not e on t he keyb oard. • You r pia no feat ures Touc h Resp onse . Y ou c ontr ol the v olum e by pl ayin g the k eys h ard er or s oft er. 4 Set t h e MAIN VOLUME ...

  • Technics sx-PR604/M - page 15

    Pl ayi ng the pia no You r pia no is equi ppe d with v arious fine funct ions whi ch mak e it a n extrem ely v ersatil e ins trum ent. But i t sh ould be re memb ered tha t it is first of al l a fi ne pian o. S elect o ne of t he pian o soun ds and enjoy its excellent quality. When y ou act iva te the SIMPLE PIAN O fe ature, t he enti re keyb oard ...

  • Technics sx-PR604/M - page 16

    Pr ogre ssi ve Piani st You r pia no offers a fun method of lear ning to p lay p ian o. Sta rt one of t he 100 et udes inc orpora ted in thi s pia no, read the m usic i n the d isplay , lis ten to t he gent le ac compan iment for you r own a nd, have a good p ract ice! 1 Press the PROGRESSIVE PIAN IST butt on. 2 Sel ect t he goal o f the practic e. ...

  • Technics sx-PR604/M - page 17

    Se e and li st en t o th e demon stratio n 1 Press the DEMO bu tton . 2 Use the butt ons to t he lef t and right the d ispl ay to sel ect the de monstr ation tune you wi sh to see and l isten to. • The d em ons trat ion perf orma nce a nd disp lay cor res pond in g to yo ur s el ectio n wil l be gi n. • To en d t he de mons tra tio n befo re i ...

  • Technics sx-PR604/M - page 18

    Select a sound 1 In th e COND UCTOR section on the panel , pr ess the RI GHT 1 but ton t o turn i t on. 2 In th e SOUND GROUP or PIANO sect ion, press o ne of t he sound butt ons. 3 Sel ect a sou nd fr om the l ist of soun ds sho wn on th e dis play. • For mos t of the butto ns , th e list of s ou nds i s cont ain ed on tw o or mor e sc ree n “ ...

  • Technics sx-PR604/M - page 19

    Select the registration for a music style (PIANO STY LIST) 1 Press the PIANO STYL IST butt on to turn i t on. 2 Press the PI ANO STYLES butto n. 3 Use the ARRAN GE MOD E butt on to sel ect t he desir ed typ e of arran gement . • Sel ect t he ty pe yo u wi sh t o play (PIANO SOLO/PIANO & COMBO /PIANO & ENSEMBLE). 4 Us e the SEL ECT M OD E ...

  • Technics sx-PR604/M - page 20

    Automatic panel setti ngs (ONE TOUCH PLAY) 1 In th e RH YT HM GROU P section, pre ss the but ton f or a des ired r hythm. 2 Sel ect a rhy thm f rom the l ist of rhyt hms on the di spla y. 3 Press and ho ld the ONE TOU CH PLAY button for a few seco nds. • The soun d, ef fect s and temp o sui tab le for the se lect ed r hyt hm are aut oma tic al ly ...

  • Technics sx-PR604/M - page 21

    • In t his examp le y ou pl ayed chor ds b y pr essin g the ke ys for the “ root not es ” (ONE FINGER chords). But you can al so sp ecif y the ch ord by pl aying al l th e note s i n th e c hor d. (Ref er to page 47. ) • Yo u can insert a fi ll-in pa tter n wh ile th e pr eset r hyt hm pat tern is pl ayin g by pre ss ing eithe r the FILL IN ...

  • Technics sx-PR604/M - page 22

    Recor d your perfo rmance (SEQUENCER) 1 In th e SEQUENCER section, press the EASY REC butt on to tur n it on. 2 Press the O K button. • The di sp lay ch an ges t o th e REA LTIM E RECORD display. DEMO SPLIT POINT MAIN VOLUME APC/SEQUENCER VOLUME MODE CHORD FINDER OFF/ON AUTO SETTING BANK STOP 8&16 BEAT ROCK & POP BALLAD JAZZ & SWING M ...

  • Technics sx-PR604/M - page 23

    3 Pl ay the son g on the keyboa rd. 4 When y ou have fini shed p layi ng, pre ss the EASY REC button agai n to turn i t off. • The PLAY bu tton in th e SEQUENCER se cti on turns on . Playing back your recorded performance A Press the SEQUENCER RESET ( FIL L IN 1 ) bu tton . B Press the START/ST OP but ton. • You r per for ma nc e is play ed ba ...

  • Technics sx-PR604/M - page 24

    Store yo ur pa nel settings (PAN EL ME MORY) 1 Set up the des ired p anel sett ings (sou nds, v olum es, etc .) 2 Use the NEXT BANK but ton to s elect a bank (A, B , C). • The bank names are shown on the disp lay . 3 Wi th th e SET butto n held do wn, pr ess one of t he number ed but tons o f the PANEL MEMORY ( 1 to 8 ). • Th e curr ent pa nel ...

  • Technics sx-PR604/M - page 25

    Sav e d ata on a fl op py dis k 1 Insert a disk you wish to save to into the D isk Dri ve sl ot. Pu sh it all t he way in unt il y ou hear a cli ck. 2 On the DISK MENU disp lay, select SAVE. • If yo u attemp t to use t he SAVE procedu re wh en an unfo rma tte d d isk i s in sert ed in to t he Di sk Dri ve sl ot, the FO RMAT disp lay appe ars . Fo ...

  • Technics sx-PR604/M - page 26

    Recall data from a floppy disk 1 Press and ho ld the DISK but ton f or a few se conds. 2 Select the file you wish to load. 3 Press the LO AD butt on. • The data is copie d to the in terna l memory of t his instr um ent. 4 Press the PLAY butt on in t he SEQUENCER secti on to tur n it on. 5 Press the ST ART/STOP butt on. • Th e reca lle d s ong i ...

  • Technics sx-PR604/M - page 27

    Loa d r hyth m dat a fr om a Te chni cs pattern disk (COMPOSE R LOAD) 1 Insert a commercially sold Techn ics patt ern dis k int o the D isk Dri ve sl ot. 2 In th e RH YT HM GROU P section, pre ss and h old th e LOA D ( MEMORY ) butt on fo r a few seco nds. 3 Sel ect t he name of the pat tern t o load . 4 Press the LOAD but ton. • Rh yth m da ta i ...

  • Technics sx-PR604/M - page 28

    Play back co mmercial song disks (DIRECT PLAY) 1 Inser t the s ong di sk in to th e Disk Drive slot. 2 On the DISK MENU disp lay, select DIRECT PLAY. 3 Use the butt ons b elow t eh displ ay to select a song. • For SMF so ng s, us e th e PL AY AS bu tto n t o spec ify a sou nd arra ngem ent mo de. 4 Press the START butt on. • Th e sel ected song ...

  • Technics sx-PR604/M - page 29

    Theatre Sonic (PR804) The THEATRE SO NIC fe ature cr eate s a speci al s ound fi eld t o give s tereosc opic e ffect s to t he inst ru- ment sound. This ef fect can b e enhanced by add ing external rear sp eakers . A Press the THEATRE SONIC button to turn i t on. • The e ffect is app lied. • Ev en if r ear spe aker s are no t conn ec ted, a vi ...

  • Technics sx-PR604/M - page 30

    Remote Contro ller (PR8 04) You can use the in clud ed wirel ess rem ote con tro l to ad just the M AIN V OLUME , act ivate D IRECT PLAY (page 9 8), and a cti vate SE QUENCER pla yback ( page 67 ). • To op era te DIRECT PL AY with the re mote cont roll er, t he n orma l pl ayba ck dis play mu st be prese nt wi th the dis k ins erte d, and f or th ...

  • Technics sx-PR604/M - page 31

    About the di splay A l arg e-si ze d isp lay, ea sy to op erat e w ith ex ce llent r ead ab ilit y, is u sed f or d isp layin g v ari ous in fo rmat ion s uch a s t he na mes of th e sel ec ted so un ds an d rh yt hms e tc . and w hen se tti ng t he fu nc tio ns. Le t ’ s ta ke a lo ok. • The di splay illu stra tions sho wn in th is Us er ’ s ...

  • Technics sx-PR604/M - page 32

    PAGE When th ere are addit ion al par ts t o the cu rr ent di sp lay, a p ag e num ber indic ati on, fo r examp le P AGE 1/2, appe ars in the uppe r rig ht cor ner of the s cre en. F or ex ampl e, 1/2 indic ates tha t ther e are two p ages of the d ispl ay, and the c urr ent page is p ag e 1. In t his c ase, you ca n us e t he up per and low er PAG ...

  • Technics sx-PR604/M - page 33

    HELP Yo u can fi nd an ex plan ati on of eac h but ton ’ s fun ction on th e d ispl ay. 1. Press the HELP butt on. • The follo wing displ ay ap pears . 2. Use the but tons bel ow the disp lay to s elect a langu age. 3. Press the OK button . 4. Press a button on the pane l who se expl anati on you wish to read. • An ex pla nati on of th e butt ...

  • Technics sx-PR604/M - page 34

    Selecti ng sounds Se lect t he so un ds for the t hr ee pa rts yo u ca n play on the keybo ard — RIGHT 1 , RIGHT 2 and LEFT . After first selec ting a part and a SOUND GROUP , ch oo se the de si red soun d fro m the di sp lay. Select a sound 1. In th e PART SELECT section, choose RIGHT 1 , RIG HT 2 or LE FT . • The CONDUCTOR butt ons are use d ...

  • Technics sx-PR604/M - page 35

    SOU ND EX PL ORER Thi s is a co nv enie nt feat ure fo r fi ndi ng the so und yo u want fr om th e many avai labl e sou nds. 1. In th e PART SELECT sectio n, select a part. 2. Press the SOUND EXPLORER button to t urn it on. • Us e th e but ton s t o the l eft an d rig ht of t he dis pla y to se lec t the soun d. 3. Use the ∧ an d ∨ buttons to ...

  • Technics sx-PR604/M - page 36

    Assigni ng pa rts to the key boar d The CONDUCTOR bu ttons are used to a ss ign t he p arts ( RIGHT 1 , RIGHT 2 , LEFT ) t o th e key boar d in many di ffer ent w ays. COND UCTOR • The volu me for each par t ca n be a djus ted inde pend ently . (R efer to page 31.) • The f oll owin g con dit ions are in effe ct whe n the AUT O PLAY CHORD is use ...

  • Technics sx-PR604/M - page 37

    SPLIT You can spl it th e key boar d int o ri ght an d le ft sect ions ( SPLIT ), and a ssi gn a dif fere nt s ound to ea ch sect ion. 1. Press the LEF T bu tton in t he CONDU CTOR to tu rn it on . • If t he LEFT p art does not turn on, th en t urn off th e AUTO PLAY CHORD , or s ele ct any m ode exce pt PIANI ST. 2. Use the SPLIT POINT button t ...

  • Technics sx-PR604/M - page 38

    Pedals Susta in pedal When a key is releas ed while th is pe da l is de pre ssed , th e soun d is sust ained so that it li nge rs and slowl y fa des out . • Thi s effe ct does n ot w ork f o r the soun ds in the DRUM KITS grou p. • This eff ect does not wor k for som e sou nds. • The le ngth of t h e sus tai n can be se t for each part. (Refe ...

  • Technics sx-PR604/M - page 39

    Touch Sens iti vity Adj ust keyb oar d to uch re sponse . 1. Press the PROGRAM MENU S butt on to turn it on. • The d isplay l ooks simil ar to th e follow ing. 2. Select T OUCH SENSITIVIT Y. • The d isplay l ooks simil ar to th e follow ing. 3. Use the buttons t o the left o f th e displ ay t o sel ect the fun ction you wi sh to set. Use the ? ...

  • Technics sx-PR604/M - page 40

    2. Use the ▲ and ▼ but tons to sele ct an e ffect gro up. • The EFFE CT ME MOR Y is f or e dit ed eff ects (s ee be low) . 3. Use the buttons t o the right of the di splay to sel ect t he type. • If the type s c ompr ise mor e th an on e di splay “ pa ge, ” us e the PAG E butt ons to swit ch pa ge s. • If yo u pre ss the VARI button t ...

  • Technics sx-PR604/M - page 41

    RE VERB REVERB ap plies a rever ber atio n eff ect t o the sound . Thi s eff ect is appl ied t o all t he pa rt s in c omm on. ⇒ Press the REVERB butt on to turn i t o n. • This eff ect does not w ork f or th e METRONOM E . Type a nd parame ter sett ings 1. Press and ho ld the REVERB button for a f ew seconds. • The displ ay ch ange s to th e ...

  • Technics sx-PR604/M - page 42

    4. Use the buttons t o the left o f th e displ ay t o select an item you wish to set (MIC REVERB SETTING/MIC EFFECT SETTING ). 5. Use the PARAMETER ▲ and ▼ butt ons to sel ect th e function , and us e the VALUE ∧ an d ∨ but tons t o chan ge the se tti ng. MIC REVERB (separa te reverb for mic inp ut) TYPE: Type of reverb (ROOM/KARAOKE/STAGE/ ...

  • Technics sx-PR604/M - page 43

    Techni -chor d TECHNI-CHORD t urn s y our s ingl e no te m elod ies int o fu ll ch ords a nd o ffe rs you a ch oice of diff ere nt ty pes f rom a simp le du et wh ich ad ds one h arm ony not e to y ou r melo dy note, to b ig band reed s wh ich ad ds f our h arm ony not es t o your m el ody no te . If TECHNI-CHORD is part of a ONE TOUCH PLAY or PIAN ...

  • Technics sx-PR604/M - page 44

    Selecti ng rhythm s Man y exci tin g r hythm s a re sto red in the me mo ry of th is inst rum ent . Fir st s el ect one of the r hyt hm gr oups and the n ch oo se t he desi red r hyt hm. Select a rhythm 1. In th e RHYTHM GRO UP section, select a rhyt hm gro up. • For info rmati on ab out t h e ME T RON OM E , s ee th e foll ow- ing secti on. • ...

  • Technics sx-PR604/M - page 45

    MET RONOME 1. In th e RHYTHM GRO UP section, select METRONOME . • The follo wing displ ay ap pears . 2. Sel ect t he time si gna ture f or the met rono me. • Selec t “ M etr onom e Off ” if you do not wi sh the f irst beat of the m ea sure t o be ac cent ed . • Pr ess t he START/STOP butto n to start t he metro nome. Start the rhythm The ...

  • Technics sx-PR604/M - page 46

    Playin g the rh ythm Int ro, f ill -i n and end ing p atter ns f i t ti ng ea ch di ffer ent rhyth m pat ter n ar e pe rman ently rec ord ed in yo ur ins trume nt, th us al lo wi ng a ver sati le r hyt hm pe rf or manc e. • Thes e p att erns a re n ot avail able f or t he METRONOME . INTRO Be gin th e rh yth m pe rfor ma nce wi th a n in tro patt ...

  • Technics sx-PR604/M - page 47

    FI LL IN You can ins ert a f ill- in patte rn any time dur ing the rh ythm per forma nce. C hoo se fr om t wo di ffer ent f ill- in patte rns. 1. Sel ect a rhyt hm and press the START/STOP butt on. 2. Press the FI LL I N 1 or FILL I N 2 butt on. • A fi ll-in patte rn i s hea rd im med iately for th e re main der of the meas ure. • When a FILL I ...

  • Technics sx-PR604/M - page 48

    <One-finger> Pre ss a ke y in th e le ft k eybo ard se ct ion t o sp ec ify the r oo t not e. Th e ma jor c hor d corr esp ondi ng to t his roo t n ote is aut o- mat ica lly pl ay ed in a n acc omp anim en t patt ern. • When thr ee or more ke ys o f a ch ord are pres se d, it is re cogn ized as a < fing ered> chord . Min or, sev enth ...

  • Technics sx-PR604/M - page 49

    How to us e the AUTO PLAY CH ORD 1. Sel ect the desi red rhyth m and sound(s ), a nd set th e te mpo. • Do no t sel ect MET RONOME . 2. Press the AUTO PLAY CHO RD ’ s OFF/ ON bu tt on to tu rn it on . 3. Press the AUTO PLA Y CHORD ’ s MODE but- ton t o turn it on. • The d isplay l ooks simil ar to th e follow ing. 4. Sel ect an A UTO PLA Y ...

  • Technics sx-PR604/M - page 50

    APC V OLU ME To ad jus t th e volu me ba lance be twee n the au to matic accom - pani ment and th e part s you pl ay man ually o n the keyboa rd, the v olume of all th e autom atic accom panime nt parts can b e low ered as on e. ⇒ Us e the APC/SEQUENCER VO L UME sl ide contr ol t o adjust the vol ume. • Us e thi s contr ol to lo wer the aut om ...

  • Technics sx-PR604/M - page 51

    Fade I n/Fade Out Add inter est t o you r pe rform anc e by s tart ing a p art w ith a f ade -in or e nd ing it wi th a fade -ou t. FADE IN At th e begi nni ng of the s ong, t h e v olum e of ea ch pa rt r ises slo wly. 1. Set up the p anel se tti ngs for you r pe rfor m- anc e. 2. Turn on the FA D E I N butt on. • The ind icator flashe s. In thi ...

  • Technics sx-PR604/M - page 52

    Sound Ar rang er The SOUND ARRANGER feat ur e let s yo u sel ec t ot her soun ds f or t he AUTO PLAY CHORD par ts of each rhy thm. 1. Sel ect th e rhythm w hose sou nd you wish t o cha nge. • Do no t sel ect the ME TR ONO M E o r the MEM ORY bu tton. 2. In t h e SO UND AR RANGE R sectio n, press the SET butt on to t urn it on. • The d isplay l ...

  • Technics sx-PR604/M - page 53

    Piano Styl ist Thi s feat ure au toma tic ally l aun ches the a ppr opr iate i nstr um ent s etti ngs wh en you s elec t the s tyle o f t he ar rang emen t you wish t o pla y in. By usin g this fea tur e, you can e asily achi eve a perf orma nce l ike tha t o f a fi rst-r ate pi ani st. PIANO STYLES Sel ect a su itabl e styl e for y our pe rforma n ...

  • Technics sx-PR604/M - page 54

    Musi c St yle Arrange r The MUSIC ST YLE ARRANGER hel ps you to mak e prof essio nal re gistr atio n ch anges d uring your pe rfor manc e. Sel ect be tween fo ur co ntr astin g reg ist rati on s at th e push of a but ton , or let you r inst rum ent chan ge th e reg istr at ion auto m ati cally fo r you wh en you us e FILL IN 1 or 2 . Th e MUSIC STY ...

  • Technics sx-PR604/M - page 55

    Panel Me mory PANEL MEMORY sto res al l the c urr ent p an el se tti ngs so yo u c an r ecal l th em at the pu sh of a b utt on. How to store the panel settings St ore up to 24 panel setti n g s (3 bank s x 8 memor ie s). By sto ring al l the pan el sett ing s you us e for a so ng in t he same ban k, fo r ex ampl e, y ou can sw itch f rom on e pa n ...

  • Technics sx-PR604/M - page 56

    Recall the panel setup 1. Press the BANK VIEW but ton to t urn it on. Sel ect a ba nk. 2. Press the desi red PANEL MEMORY n umber butt on ( 1 to 8 ). • The pa nel s etu p ch an ges t o t he on e s tore d in th e s peci fie d memo ry. • You can the n cha nge the so und se ttin gs , etc . manu all y; how ever , the cont ent s of th e memo ry r em ...

  • Technics sx-PR604/M - page 57

    Playin g phra ses Duri ng your pe rfor manc e, y ou c an in sert a sh ort r ec ord ed p hrase or e ffect sou nds by p ressi ng a pa d butt on. A diff ere nt gr oup of phr ase s is recor ded in each ba nk. 1. Press the BANK button. 2. Sel ect t he desir ed bank f rom t he displ ay. • The li st of ba nks c onsis ts of thr ee s cre en pa ges. Us e t ...

  • Technics sx-PR604/M - page 58

    Copying p hrases Yo u can co py the de sir ed da ta, as phr ases , fro m t he SEQUENCER to ea ch pad m emor y of a “ User Bank ” . • Ch ord dat a is a lso copi ed to p ad bu tto ns 5 and 6 ( SOLO ). PHRA SE C OPY Co py a p hra se from o ne pad t o an ot her . 1. Press the PROGRAM MENU S butt on to turn it on. • The d isplay l ooks simil ar ...

  • Technics sx-PR604/M - page 59

    Compile Yo u can assig n d esir ed p hra se s fro m dif fere nt bank s in “ Comp ile Ban k ” 1 an d 2 . 1. Press the PROGRAM MENU S butt on to turn it on. • The d isplay l ooks simil ar to th e follow ing. 2. Select PIANO PERFORMANCE PADS. • The d isplay l ooks simil ar to th e follow ing. 3. Select COM PILE SET. • The d isplay l ooks sim ...

  • Technics sx-PR604/M - page 60

    6. Press the OK button . • For de tails ab out KEY SETTI NG , refe r to page 87. • For det ai ls about CHORD MODIFY CHANGE, refer to page 88 . 7. Select the part to record to. • Press the button f or PART 1 or PART 2. • Rec ordi ng be gins as so on as the pad is s ele cted. • Two parts can be recorded (PAD 1 – 4). • The d isplay l ook ...

  • Technics sx-PR604/M - page 61

    Outlin e of the Seque ncer A se quen cer recor ds y our pe rfor ma nce i n a s imila r wa y to a tape r eco rde r. Thi s in str um ent ’ s SEQUENCER al lows you t o r eco rd up t o 1 0 perf orma nc es in a va riet y o f wa ys. You ma y wan t to rec ord your ent ire p erf orm an ce in one g o (espe cia lly if yo u ar e us i ng AUTO PLAY CHO RD to ...

  • Technics sx-PR604/M - page 62

    3. Select RECORD & EDIT, COPY & PAST E or RAN GE E DIT, a nd fol low t he c orrespo nding pro cedure . <RECORD & EDIT> <COPY & PASTE> <RANGE EDIT > Sum mary of th e SEQU ENCER m enu items REC ORD & EDI T The se fun cti ons are re cordi ng and ed iti ng ope rati ons us ed for c rea t i ng a new pe rfor manc e. R ...

  • Technics sx-PR604/M - page 63

    Slide Show This ins trum ent c an s ho w va riou s imag es whic h ch ange auto mati ca lly corr esp on ding to the m usic p rog res sion ju st l ike the DEMO per forma nce. Us ing th e Sli de Sho w func tio n, y ou ca n c rea t e a m ult i-med ia sh ow o f im ages sync hroni zin g wi th the sound. Schematic Set the im ages To s et t he im ages , pr ...

  • Technics sx-PR604/M - page 64

    Sequence r part s The f oll owin g sum mary expl ain s what is s tor ed in e ach SEQUENCER part . • You can use the TRACK ASSIG N function to assign part s to tracks as y ou wish. (Refer t o page 7 6.) • Thos e i tems abov e wh ich ar e no t o per ation s a vaila ble w ith t his i nstr ume nt can be recor ded on ly from MI DI i nput. Par t name ...

  • Technics sx-PR604/M - page 65

    Easy Rec ord Su ppos e yo u are pl ay ing yo ur in stru m ent an d yo u wish t o rec ord a nd p lay bac k your per for manc e to hear how it soun ds . You can by pass the set- up p roc edur es of t h e full -sca le se qu ence r and b egi n re cordi ng qui ckly and e asi ly. • No te t hat by ex ecut ing EASY REC , the origi nal dat a in t he s ele ...

  • Technics sx-PR604/M - page 66

    • The d isplay l ooks simil ar to th e follow ing. 6. Use the buttons bel ow the dis play t o turn on the “ REC ” indi catio n ab ove the t rack n umbers you are go ing to record. • Whi le you a re rec ordi ng, you can play back trac ks w hich ar e alr eady rec ord ed. P ress the c orre spon ding bal anc e but tons t o dis pl ay “ PL AY ? ...

  • Technics sx-PR604/M - page 67

    CYCLE RECOR D This mode allo ws you t o have spe ci fied r ecord ing m e asure s con tin uous ly re peat ed . Th us yo u can rec ord meas ures b y addi ng n otes duri ng an y c yc le. 1. On t he REA LTIM E RECO RD disp lay, spec ify “ REC ” for a trac k numbe r you are goi ng to record, a nd “ PLAY ” for t ra ck numbers you w ish to ha ve p ...

  • Technics sx-PR604/M - page 68

    8. When you are fini shed pl ayi ng bac k you r per- form ance , press t he SEQU ENCER PL AY bu t- ton to tu rn it off. CYCL E PLA Y Yo u can have sp ecifie d m eas ure s play ed ba ck rep eate dly. 1. On the SEQUENCER PLAY display, specify “ PLAY ” for track numbers yo u wish to have play ed back . 2. Pr e ss th e CY CLE butt on. • The d isp ...

  • Technics sx-PR604/M - page 69

    SEQUEN CER VOLUME When pl aying the keyb oa rd al ong w ith a recor ded pe rform - ance , you ca n adj ust the tot al vo lume of a l l the pl ayb ack par ts as one. ⇒ Us e the APC/SEQUENCER VO L UME sl ide contr ol t o adjust the vol ume. • Use th is control to lower th e volume o f the recorde d pl ayba ck pa rts whe n it is to o l oud r elat ...

  • Technics sx-PR604/M - page 70

    Song Sel ect You can s ele ct a des ired song fr om t he lis t of r ecor ded so ngs. 1. On the SEQ MENU display, select RECORD & EDIT. 2. On the RECORD & EDIT di splay, select SO NG SELECT. • The d isplay l ooks simil ar to th e follow ing. 3. Use th e SONG SEL ECT ▲ and ▼ bu tt on s to select a song. • The total amou nt of m em or ...

  • Technics sx-PR604/M - page 71

    AUT O PUNCH RECO RD You can a lso set th e punc h-i n and pu nch- out poi nts b efore - han d, so that rec ord ing a uto mat ica lly be gi ns an d ends at the spe cified poin ts. 1. On t he PUNCH RECO RD dis play, pres s the AUT O: OFF button. • If REC i s not s how n fo r any trac k, th e bu tto n does not turn ON. • The d isplay l ooks simil ...

  • Technics sx-PR604/M - page 72

    5. Use the CURSOR and b utto ns to move the cu rsor to the no te pos ition ( dot ) you are goi ng t o st ore . • Ea ch do t rep res ent s on e-e ight h of a qua rte r-no te (a thirt y- se cond no te) . • When storin g tripl ets, it may not be possibl e to matc h the tim ing ex actly with th e 1/32- not e s teps. H owe ver, if you sele ct triple ...

  • Technics sx-PR604/M - page 73

    Assigning the i mages Ass ign im ages to t he se lect ed p oint ( PIC) of a so ng. 1. Use the SONG SELECT ∧ and ∨ of th e SEQUENCER MENU display to select a song numb er to whi ch the i mages will be as signed, and s elect RECORD & E DIT. 2. Sel ect ST EP RECO RD on t he RECO RD & EDIT display. 3. Use the balance bu ttons below the di s ...

  • Technics sx-PR604/M - page 74

    Store a chord prog ression St ore th e c hor d prog ressi on f or t he AUT O PLAY CHORD i n th e trac k for the C HO RD pa rt. T hen, wh en th e AUTO PLAY CHORD is us ed dur ing p lay back , e ven if yo u do n ot s peci fy t he chor ds wi th y ou r lef t hand , th e c hor ds ch ange au to matic al ly. • The c ho rd len gth is sp ecif ied wi th t ...

  • Technics sx-PR604/M - page 75

    <M easu re 4> (1) W hile p layi ng a D7 chord , pres s the  key one t ime. (2) W hile pl ayi ng a G7 chor d, pre ss the  key one t ime. • Yo u can pr ess th e INTRO & ENDING bu tto n or a FI LL IN bu tto n on th e pa nel to sto re th e desi red pat tern at the c urs or posi ti on. (An INTRO or COUNT INTRO ca n be st ore d only at ...

  • Technics sx-PR604/M - page 76

    Co rr ect the rec ord ed rh yth m pr ogres sion 1. Foll ow t he pr ocedur e to selec t the ST EP RE- CORD: RHYTHM di spl ay. 2. Use the MEAS butt o ns to g o to the me asure you wish to modify. (The * is hig hli ghted .) 3. Cor rect th e rhythm data. • Pr ess t he ERS butt on to er ase da ta at th e curso r p ositi on. • If y ou wish to cancel ...

  • Technics sx-PR604/M - page 77

    Quantiz e The Q UA NTI ZE f u nc tio n c an corr ect t he timi ng of yo ur per forma nce a fte r it has be en r ecord ed. If the rhyt hm i s s light ly ou t of s ync or inexa ct, it wi ll a utomati cally be co rrec ted to the sp ecifi ed qu antiz e leve l. 1. On the SEQ MENU display, select RECORD & EDIT. 2. On the RECORD & EDIT displa y, s ...

  • Technics sx-PR604/M - page 78

    Track Cle ar Er as e th e con tent s of a spe cifi c trac k. 1. On the SEQ MENU display, select RECORD & EDIT. 2. On the RECORD & EDIT displa y, select TRACK CLEAR. • The d isplay l ooks simil ar to th e follow ing. 3. Use the bal ance but tons t o sele ct the trac k or tracks you wish to clear. • A “ CLR ” ma rk i s sho wn fo r t h ...

  • Technics sx-PR604/M - page 79

    CYCLE PL AY Yo u can aur ally ch eck the data yo u ar e edit ing by ac cess in g the CYCL E PLAY display f rom the NOTE EDIT display. • If y ou wi sh othe r trac ks to be pla yed b ack, t hey shou ld be s ele cted befor eha nd o n the SEQU ENCE R P LA Y di s- pl ay. ( Ref er to page 67 .) 1. On t he NOT E EDIT disp lay, pr ess the PLAY butt on. ? ...

  • Technics sx-PR604/M - page 80

    Copy and pas te the recor ded da ta Yo u can copy an d pas te spe ci fic po rtio ns of t he rec ord ed da ta. Select the function 1. On t he SEQ M ENU dis play, use the SON G ∧ and ∨ butt ons to sel ect t he nu mber o f t he song. Th en select COPY & PASTE. • The d isplay l ooks simil ar to th e follow ing. 2. On the COPY & PASTE di s ...

  • Technics sx-PR604/M - page 81

    ME ASUR E CO PY Cop y reco rded da ta of sp eci fie d meas ure s to a sp ecif ied poi nt. • On th e d estin ati on t r ack, th e n ew da ta re plac es t he cu rren t me asur e cont ents . 1. Spe cify the measu res yo u w ish t o co py from the source track (FROM). • On the FROM side, speci fy the settings w ith the corre- spon di ng butt ons . ...

  • Technics sx-PR604/M - page 82

    ME ASUR E IN SER T Ins ert sp eci fie d meas ures a t a s pe cif ied p oin t. • The leng th o f the perf ormanc e ac cordi ngly i ncre ases by th e num ber of ins ert ed meas ure s. 1. Spe cify the measu res yo u w ish t o co py from the source track. • On the FROM side, speci fy the settings w ith the corre- spon di ng butt ons . TR AC K: Spe ...

  • Technics sx-PR604/M - page 83

    VELO CITY CHAN GE Modify the recorded velocit y in specif ic meas ures of spec ific tracks. 1. Use the TRACK ∧ and ∨ but tons to sel ect t he track you wish to edit. • Yo u ca nn ot s ele ct th e tra ck fo r t he CON TROL, R HYTHM or CHORD part. • If ALL is sel ected , all tr acks wi ll b e edit ed. 2. Use the F IRST MEASURE ∧ and ∨ but ...

  • Technics sx-PR604/M - page 84

    ADVA NCE/ DEL AY Sp eed u p or d elay t he s ound prod uct ion o f sp ecifie d p er- fo rm ance dat a. 1. Use the TRACK ∧ and ∨ but tons to sel ect t he track you wish to edit. • Yo u ca nn ot s ele ct th e tra ck fo r t he CON TROL, R HYTHM or CHORD part. • If ALL is sel ected , all tr acks wi ll b e edit ed. 2. Use the F IRST MEASURE ∧ ...

  • Technics sx-PR604/M - page 85

    Outlin e of the Compo ser The COMPOSER en able s you to c rea t e your o wn acc ompa nime nt pa tterns . A patt er n is c ompr ised of 8 par ts: DRUMS 1 , 2 , BASS and ACCOMP1 – 5 par ts. T hes e par ts wo uld f o rm t h e back ing of a son g. Rhythm co mponents whic h can be stored Di ffe ren t INTR O 1 , 2, V AR IAT ION 1 to 4, EN DI NG 1, 2 p ...

  • Technics sx-PR604/M - page 86

    Three w ays to re cord in the C OMPOSER The re ar e thre e wa ys to c reate and re cord a rhyt hm. Simple record ing method Use EASY COMPOSER to quickl y create a unique rhythm just by se lect ing a patte rn f or eac h part . Crea te a co mpl etel y new rhyth m Co mpos e all t he part s of a co mple tel y new rhy thm fr om sc ratc h. • Yo u ca n ...

  • Technics sx-PR604/M - page 87

    3. On the RECORD MEMORY display, press the OK button. • The d isplay l ooks simil ar to th e follow ing. 4. Press the CLEAR T HE ENTIRE PAT TERN butt on. • The d isplay l ooks simil ar to th e follow ing. 5. Press the YES bu tton. • Al l the d ata fo r the s ele cted pa tter n is era se d. 6. Use the MEA SURE ∧ and ∨ bu tt ons to spe cif ...

  • Technics sx-PR604/M - page 88

    4. Record the part. • The spec ifie d num ber of m eas ure s ar e re peated ly played back , d uri ng whi ch ti me any ne wly playe d notes a re a dded to t hos e al ready rec ord ed. The cur ren t me asur e num ber is sh own on the di sp lay as “ MEASURE= ” . • Record the perf ormance in C major for correct chord progress ions d uring p la ...

  • Technics sx-PR604/M - page 89

    Part Settin g You can m ake d etail ed se ttin gs fo r ea ch pa rt. 1. On t he RE ALTIME R ECOR DING disp lay, pre ss the P ART S ETTIN G button . • The s et tin gs co mpr ise th ree pages of th e d ispla y. Us e the PAG E butt ons to swit ch pa ge s. 2. Use the PAR T ▲ and ▼ b uttons to select a par t. 3. Us e the ∧ and ∨ button s to set ...

  • Technics sx-PR604/M - page 90

    Step Rec ord Use ST EP RECO RD to sto re the not es one -by -one on th e dis play . This is a co nven ient w ay t o stor e comp lic ated patt erns th at ar e dif fi cult to pl ay. Recor ding procedur e 1. Whil e yo u are record ing, press t he S TEP RE- CORD b utton. • The disp lay chan ges t o the STEP R EC ORD dis pla y si mila r to the follo w ...

  • Technics sx-PR604/M - page 91

    Measu re Edit Yo u can edit the r eco rde d dat a o ne meas ure at a ti me . Select the functio n you wis h to edit. 1. During recording, press th e MEASURE EDIT butt on. • The d isplay l ooks simil ar to th e follow ing. 2. Sel ect t he funct ion. 3. Foll ow the pro cedure to ed it t he fu nction (see below ). • On ly the cont ent s of th e sa ...

  • Technics sx-PR604/M - page 92

    ME ASUR E DELE TE Del ete spec ifi ed m eas ure s fr om al l pa rt s at o nce. • The len gt h of t he per fo rmanc e acco rdin gly d ec rease s b y th e num ber of de let ed me asur es. 1. Use the FIR ST MEASURE ∧ a nd ∨ but tons, to spe cif y the f irst m easur e to del ete. 2. Use the LAST MEASUR E ∧ and ∨ buttons t o spe cify the l ast ...

  • Technics sx-PR604/M - page 93

    4. On t he FR OM si de, use the b utto ns to s pecif y the p art to copy f rom. • For the DRUM part you can s p ecify the DRUMS 1 or 2 par t; for oth er p art s you ca n spe cif y a pa rt ot he r tha n a DRUMS part. 5. On the TO side , use the FUNC ∧ and ∨ but tons to spec if y for ea ch par t whethe r or not t o copy the d ata. KEEP: Pa rt d ...

  • Technics sx-PR604/M - page 94

    Outlin e of the Disk Dri ve func tion The Disk Dri ve enab les you to s tor e r ecord ed an d st ored data f rom t his inst rumen t ’ s mem ori es on d is ks, as wel l as pl ay co mme rcia l re co rde d d isks o n t his in stru m ent . Internal m em ory and Floppy Di sk Dri ve The stora ble in ter nal memor y of t his ins tr ume nt a s wel l as t ...

  • Technics sx-PR604/M - page 95

    Playback of commercial song disks DIREC T PL AY lets you enjo y playin g co mmer cially s old s ong dis ks di rect ly f rom a dis k. It ’ s fas t beca use you don ’ t hav e to load the disk da ta i nto yo ur i ns trum ent ’ s memory . • DIREC T PLAY is poss ible f rom th e follo win g disks: St anda rd M IDI F ile St anda rd M IDI F ile wit ...

  • Technics sx-PR604/M - page 96

    Loa din g dat a Rec all ( loa d) the data f rom th e disk to thi s in str umen t ’ s m e mor ie s. • No te t hat t he lo ad pr oce dur e cau ses a ny da ta whic h is c urre ntl y stor ed i n th e re leva nt me mo ries t o be era sed. LOAD Load dat a th at sav ed to a di sk int o th is in strum ent ’ s me mory. 1. Inser t the di sk wit h the s ...

  • Technics sx-PR604/M - page 97

    SMF LOA D Load dat a wh ich was s aved in the “ Stan da rd MID I File ” (SM F) form at. 1. On t he LO AD (PA GE 1/ 3) d isplay , pre ss t he SM F but t on. • The d isplay l ooks simil ar to th e follow ing. • For disk s w hic h con tai n SMF file s on ly, t his disp lay ap- pear s a uto mati ca lly whe n LOAD is s elect ed on th e DISK MENU ...

  • Technics sx-PR604/M - page 98

    Direct Pl ay Yo u can enjo y imme diat e p layba ck of “ Stan dard MI DI Fi le ” (SMF), “ Di sk O rch estr a C oll ecti on ” (DOC) a nd “ Pian oDi sc ” dis ks — all wi t h out lo adi ng the s ong d ata . 1. Inser t the di sk wit h the sto red data int o the Dis k Drive. 2. On the DISK MENU display, select DIRECT PLAY. • The d isplay ...

  • Technics sx-PR604/M - page 99

    Song M edl ey So ngs s av ed fr om th e SEQUENCER to a dis k (disk data) in t he TECHNICS F ORMAT can be pl ayed back i n a medley. 1. On the D ISK MENU display, sel e ct SO N G MEDLE Y from the d isplay . • The d isplay l ooks simil ar to th e follow ing. 2. Sel ect t he order of fil es in the medl ey. • If A LL is pr es sed, all th e file s a ...

  • Technics sx-PR604/M - page 100

    2. Press the YES bu tton to format the d isk, or pre ss the NO butt on to can cel the forma t. • When the YES but ton is pressed , disk format begins. Aft er abou t 1 – 2 m inut es, for mat tin g is com ple ted an d DIS K NAMI NG di splay i s sh own. 3. Use the butt ons b elow t he displ ay to as sign a name . • Us e the P OSITI ON but ton s ...

  • Technics sx-PR604/M - page 101

    <SAVE OPTION> Spe cify t h e ki nd o f da t a you wish to sa ve to the d isk. To maxi mize eff e c tiv e use of d isk m e mo ry or to minimize the sav e time, s elect on ly the typ e of data you wi sh to save. 1. Us e the PAGE butto ns to access the 2 /3 SAVE OPTION display. • The d isplay l ooks simil ar to th e follow ing. 2. Use the butt ...

  • Technics sx-PR604/M - page 102

    8. Use the SAVE AS butto n to se lect the so und gener ator mod e (GM/ GM2/NX) . • If th e dat a c reat ed o n th is ins tru ment was save d in th e GM / G M2 mod e , th e sound s et c. m ay ch ange . If savin g data in th e GM/GM2 m ode, b e sure to sele ct sounds f rom the SO UND EXPLORER soun d g rou ps w hen y ou crea te dat a. — GM: GM BAS ...

  • Technics sx-PR604/M - page 103

    Outlin e of the Sound The SOUND mode is used for making fine adjustments to the f unctions related to sound, such as tone, and tuning. 1. Press the PROGRAM MENU S butt on to turn it on. • The d isplay l ooks simil ar to th e follow ing. 2. Select SOUND. • The d isplay l ooks simil ar to th e follow ing. 3. Sel ect t he desir ed menu. 4. Foll ow ...

  • Technics sx-PR604/M - page 104

    <PAGE 1> SOUND: Use the SOUND ∧ an d ∨ bu tto ns to s elec t a s ound . • The b utt on s on the co ntro l pane l m ay also b e used t o se lect a so un d. VOLUME: Us e the V OLUM E ∧ and ∨ butto ns to adj ust th e volume (0 t o 12 7). PAN: Us e the P AN ∧ and ∨ bu tto ns to a dj ust the st ere o ba lanc e (L64 – CENTER(CT R)-R ...

  • Technics sx-PR604/M - page 105

    <PAGE 4> MONO / PO L Y MO DE: Use the M O NO/POL Y MODE ∧ an d ∨ butto ns to select the outp ut mo de. PORTAMENTO : Us e the ON /OFF butt ons to en ab le or dis able th e por ta- me nto f unc tio n. ( Port amen to is a conti nuou s gl idi ng mo ve- men t fr om one to ne to anoth er. ) • Use the ∧ and ∨ b uttons to s pecify th e port ...

  • Technics sx-PR604/M - page 106

    <PAGE 3/5> DI GITA L E FFE CT: Se lect DIG ITAL EFF . Us e th e butt ons belo w t he disp la y to set t h e D IGITAL EF FECT to O N or O FF fo r th e corr esp ondi ng par t. CHORUS: Select CHORUS. Use th e buttons b elow the dis play to set t h e CHORUS to O N o r OF F f o r ea ch pa r t. CHORUS DEPTH: Select CHORUS DEPTH. Us e the buttons be ...

  • Technics sx-PR604/M - page 107

    Maste r Tuni ng This s etting i s us ed t o f ine -tu ne th e p itch of the e nti re i nstr ume nt. This is conv enien t wh en this inst rum en t is p layed wit h o t her inst r umen ts or wit h a r ecor ded per form anc e. 1. On the SOUND MENU display, select MASTER TUNI NG. • The displ ay ch ange s to th e foll owin g . 2. Use the ∧ an d ∨ ...

  • Technics sx-PR604/M - page 108

    Sound Lo ad Opti on The d ata for eac h individ ual sound is set with th e most suitab le effect se ttings, etc ., but in som e c ase s when switc hing f rom o ne sound to another and these s ettings are recalled, t he setup is not th e way you want it. By using the SOUND LOAD OPTION, you can adjus t th e set tings so tha t spe cif ic dat a is no t ...

  • Technics sx-PR604/M - page 109

    Outlin e of the Rever b & Effect In th e REVERB & EFFECT mod e, you can m ake detai led setti ngs relat ed to this instrumen t ’ s ef f ect s. 1. Press the PROGRAM MENU S butt on to turn it on. • The d isplay l ooks simil ar to th e follow ing. 2. Select REVERB & EFF ECT. • The d isplay l ooks simil ar to th e follow ing. 3. Sel e ...

  • Technics sx-PR604/M - page 110

    Outlin e of the Sound Edi t SOUND EDIT enables you to create your own ne w s ound by altering one of th e this instrument ’ s pr eset so unds . Y our new sound can be s tored in one of t he sound mem ory locations. SOUND EDIT has two methods of u se. You can edi t in detail usin g functions more co m mo nly associate d with a synthesizer, or you ...

  • Technics sx-PR604/M - page 111

    Easy Edi t The m o st com mon ly us ed ed it fu nc tions are cons ol idate d o n one displ ay, provi din g con veni en t and q ui ck ed iting o pe rat ion. 1. On t he S OUND EDI T menu disp lay, s elec t EASY EDIT. • The displ ay ch ange s to th e foll owin g . 2 Use the butt ons bel ow the dis play to specif y the va lue of the at tribu te. • ...

  • Technics sx-PR604/M - page 112

    6. Us e the DET UNE ∧ and ∨ butt ons for fine adjus tment of the p itc h deviat ion. 7. Us e the P ANNI NG ∧ and ∨ butt ons to ad just the st ere o balance . • PA N: CTR i s th e cen ter p oint. At L 64, th e soun d is all t he way to the left, a t R6 3 all the wa y to th e right. • If STEREO R or STEREO L is selected for the MODE, th e ...

  • Technics sx-PR604/M - page 113

    VELO CITY LA YER Adjus t these setti ngs to regula te the tone outp ut relat iv e to the velo city. 1. Use the PAGE but tons to view the 3/ 4 disp lay. • The d isplay l ooks simil ar to th e follow ing. 2. Use the buttons t o the left o f th e displ ay t o sel ect a t one (1s t, 2nd, 3rd o r 4th). 3. Us e the L-F AD E ∧ and ∨ butt ons a nd th ...

  • Technics sx-PR604/M - page 114

    PIT CH E NVELOP E Sp ecify ho w th e pit ch chan ge s ov er t ime, fr om th e ti me th e key i s pl ay ed t o the t im e the soun d di es out. 1. Use the PAGE but tons to view the 2/ 3 disp lay. • The d isplay l ooks simil ar to th e follow ing. 2. Use the buttons t o the left o f th e displ ay t o sel ect a t one. 3. Adj ust t he sett ings f or ...

  • Technics sx-PR604/M - page 115

    <Eq uali zer > For LPF (6)+EQ /HPF (6) +EQ fi lte rs, t he soun d qua lity can b e mod ifi ed by the EQU ALIZ ER. RANGE Se lect th e s ettin g ra ng e (HIG H or LOW). FREQ Se t th e stan da rd f req uenc y. GAIN Set the le vel inc rea se or decr eas e from t he v alue set f o r FREQ (dB). 6. Repeat step s 2 t o 5 fo r each ton e, as des ired. ...

  • Technics sx-PR604/M - page 116

    FI LTER ENVE LOPE TO UCH & K EY FOL LOW Spe cify h ow th e fi lte r en velope (cur ve) chan ges re lati ve to to uch o r no te pit ch . 1. Use the PAGE but tons to view the 4/ 4 disp lay. • The d isplay l ooks simil ar to th e follow ing. 2. Use the buttons t o the left o f th e displ ay t o sel ect a t one. 3. Use the TOUCH ∧ an d ∨ butt ...

  • Technics sx-PR604/M - page 117

    ENVELO PE TOU CH & KE Y FOLLO W Sp ecify ho w the volu me chan ges r elat ive to to uch o r not e pit ch ov er ti me . 1. Use the PAGE but tons to view the 3/ 3 disp lay. 2. Use the buttons t o the left o f th e displ ay t o sel ect a t one. 3. Use the TOU CH ∧ and ∨ b utto ns to c hange the t ouch s etting s. • Us e the A TK ∧ and ∨ ...

  • Technics sx-PR604/M - page 118

    Effect Edit Thes e a re set tin gs r elate d to the v ario us ef fec ts ap pli ed to y our edite d sou nd . EFFEC T 1. On t he S OUND EDI T menu disp lay, s elec t EFFECT. • The d isplay l ooks simil ar to th e follow ing. 2. Us e the r espe cti ve CHO RUS ∧ and ∨ but tons to spe cif y how the CHORUS is app li ed. 3. Use the R EVERB ADJUST ? ...

  • Technics sx-PR604/M - page 119

    Store the ne w sou nd The MEMORY button in the SOUND GROUP s ectio n acce ss es m emor y banks res erv ed for t he so unds you cre ate wit h the S OUN D EDIT . Y ou ca n sto re u p to 40 or igin al soun ds t hen s elec t th e s ound s just lik e the o th er s ound s in t he SOUND GROUP . Procedure 1. When y ou have ed ited t he sou nd to just the w ...

  • Technics sx-PR604/M - page 120

    Outlin e of Control functi ons Va riou s set tin gs rela te d to the o pe rati on of this inst rum en t are adju ste d wi th t he CONT ROL fu nctio ns. 1. Press the PROGRAM MENU S butt on to turn it on. • The d isplay l ooks simil ar to th e follow ing. 2. Sel ect CONTR OL. • The d isplay l ooks simil ar to th e follow ing. 3. Sel ect a f uncti ...

  • Technics sx-PR604/M - page 121

    Pedal Setti ng By ass ignin g one of th e ma ny p rog ram mab le f unc tio ns to e ach o f t he so ft an d sos te nuto pe dals, yo u ca n th en c ont rol the fu ncti on dur ing yo ur p erf orm ance just by p ressi ng the peda l. 1. On the CONTROL M ENU display, select PEDAL SETTING. • The d isplay l ooks simil ar to th e follow ing. 2. Us e the ? ...

  • Technics sx-PR604/M - page 122

    Outlin e of Customi ze fun ctions Ma ny of this i nstr um ent ’ s set tin gs ca n be c us tomiz ed f or maxi mum playi ng conv enien ce and e ase. 1. Press the PROGRAM MENU S butt on to turn it on. • The d isplay l ooks simil ar to th e follow ing. 2. Selec t CUSTOM IZE. • The d isplay l ooks simil ar to th e follow ing. 3. Sel ect a f uncti ...

  • Technics sx-PR604/M - page 123

    Dis play Tim e Ou t Nu mer ous m ess age d isp lays an d sett ing di splay s con veni en tly guide you t hr oug h th e ope rat ion step s o f thi s inst rum en t. Onc e you b ecom e f am iliar wi th th e oper atio n of y ou r inst r umen t, how ever, y ou m ay w ish to sho rte n or ev en sus pend th e di sp lay t im e of t he m ess age d ispl ays . ...

  • Technics sx-PR604/M - page 124

    MIDI Setti ng Load O ption Spe cify h ow M IDI d ata is hand led wh en da ta i s lo aded from a disk . 1. On the CUSTOMIZE MEN U di spl ay, select MIDI SETTI N G LOAD OPT I O N. • The d isplay l ooks simil ar to th e follow ing. 2. Use the ▲ an d ▼ buttons to sel ect an item. Load MI DI Paramete r s ? Fr om Regi stra tion f ile: Spe cify w he ...

  • Technics sx-PR604/M - page 125

    Theatr e So nic Spe aker M ode ( PR804 ) Spe cify w hethe r the T HE AT RE SON I C e ffect is to be c rea ted usi ng on ly sp eake rs of th e ins trume nt or usin g ext e r nal rear s peak ers as we ll. 1. On the CUSTOMIZE MEN U di spl ay, select THEATRE SONIC SPEAKER M ODE. • The d isplay l ooks simil ar to th e follow ing. 2. Sel ect a m ode. V ...

  • Technics sx-PR604/M - page 126

    What is MIDI? MID I (Mus ica l In strum ent Di g ita l Int erf ace) is the inte rnati ona l st anda rd f o r dig ital commu nicat ion of el ectr onic m usi cal instr umen t dat a. T his me ans th at any eq uipm ent whi ch ha s a MIDI t e r min al — su ch as el ect ron ic mus i c al inst rumen ts an d per so nal co mput- ers — can e asil y ex ch ...

  • Technics sx-PR604/M - page 127

    The following kinds of data can be transmitted/ received. NO TE d ata Thi s is the m ost bas ic kind o f MIDI dat a wh ich i s exch ange d, and i s us ed t o sp ecif y whi ch k eys are pla yed a nd how hard th ey are pl ayed . NOTE NUMBER: Number specifying which key is played. NOTE O N: Spec ifies t hat a k ey is playe d. NOT E OF F: S pec ifi es ...

  • Technics sx-PR604/M - page 128

    Part Settin g Follo w this p rocedure to set t he functio ns which ca n be set f or each part: MIDI CHANNELs, t he OCTAVE d ata to NO TE data dur in g tra nsmi ssion , an d LOCA L CON TROL ( whe ther o r not th e soun d ge ner ator of th is instr um ent is acti ve d urin g tra nsmi ssion ). 1. On the MIDI M ENU display, select PART SET- TI NG. • ...

  • Technics sx-PR604/M - page 129

    Cont rol M essages Ena ble or dis abl e the ex chan ge of v ariou s con tr ol da ta. 1. On t he MIDI M ENU d isplay, select CONTROL MESSAGES. • The d isplay l ooks simil ar to th e follow ing. • The CONTROL MESSAGES display consists of 3 p ages. Use the PAGE but tons to swit ch betw een p ag es. 2. Use the MESSAG E ▲ and ▼ buttons to select ...

  • Technics sx-PR604/M - page 130

    Comm on Setting Set th e functio ns whi ch are commo n to al l parts. 1. On the MIDI MENU display, select C OMMON SETTING. • The d isplay l ooks simil ar to th e follow ing. 2. Use ▲ and ▼ butt ons to se lect the i tem. NOTE ONL Y: Of th e pe rfor ma nce da ta, spe cify whe the r o r not o nly n ot e dat a is exch an ged. PROGRAM CHANGE TO P. ...

  • Technics sx-PR604/M - page 131

    Mode Sett ing Initi alize the setti ngs for when the NX SOUND or GM LEVEL 2 mod e i s ON . 1. On the M IDI MENU display, se l ect MODE SETTING. • The d isplay l ooks simil ar to th e follow ing. 2. Sel ect t he mode . • There are two mo des for GM LEVEL 2 depen ding on th e par ts to us e. • The c onfirma tion disp lay appears . Press the YES ...

  • Technics sx-PR604/M - page 132

    MIDI Pres ets Es tablis h the op timum se ttin gs dep en ding on h ow t his Ke yboa rd i s con nect ed to othe r eq ui pmen t, and on whet he r th is Keyb oa rd is us ed as th e mas te r or th e sla ve . 1. On the M I DI MENU display, select MI DI PRE- SETS. • The d isplay l ooks simil ar to th e follow ing. 2. Us e the ▲ and ▼ buttons to sel ...

  • Technics sx-PR604/M - page 133

    Program Chan ge MIDI Out Use th is func tio n to imm edia tely t ran smit s peci fic PR OGR AM C HA NGE and BA NK SEL ECT da ta from thi s di spla y on a spec ifi ed MID I chan nel. 1. On the MIDI MENU display, select PROGR AM CHA NGE MIDI OU T. • The d isplay l ooks simil ar to th e follow ing. 2. Use the ▲ an d ▼ buttons to select a fun cti ...

  • Technics sx-PR604/M - page 134

    Computer Con nection The se set ti ngs are used to sel ect th e mode relat ed t o MIDI sign al flo w when a perso nal c ompu ter is c onne cte d to t he USB term inal of t his inst rumen t. • Whe n conn ectin g t o a per son al co mputer , i nst all th e USB dr iv er on the i ncl uded CD- ROM to th e c omput er fi rst. (Ref er to t he separate ma ...

  • Technics sx-PR604/M - page 135

    Init ial ize Thi s in strum ent h as many setta ble fu ncti ons and s t o rab le mem or i e s. Ho wev er, yo u can retu rn the set tings and m emory to the fa ct ory- pre set stat us. INITIAL 1. Press the PROGRAM MENU S butt on to turn it on. • The displ ay ch ange s to th e foll owin g . 2. Sel ect CONTR OL. • The d isplay l ooks simil ar to t ...

  • Technics sx-PR604/M - page 136

    Connecti ons THEATRE SONI C EXT OUT (PR804) External rear spe akers for th e THEATRE SONIC e ffect can be co nnec ted to these termi nal s. ( Refe r to pa ge 12 4.) AUX IN (in put le vel 0.5 V rms, 6 k Ω ) Ot her inst rumen ts su ch as a so und ge nerat or can be con - nect ed t o thi s ter min al, and th e sou nd wil l be ou tpu t fr om this ins ...

  • Technics sx-PR604/M - page 137

    Assembly (PR604) Follow the steps below to assemble your Technics piano. Make sure you are using the correct parts and that they are in the corr ect direction. • At least 2 people are required for assembly. • To disassemble the piano, reverse the procedure. 1. Remove the packing and take the parts out of the carton. Confirm that all the parts o ...

  • Technics sx-PR604/M - page 138

    Assembly (PR804) Follow the steps below to assemble your Technics piano. Make sure you are using the correct parts and that they are in the corr ect direction. • At least 2 people are required for assembly. • To disassemble the piano, reverse the procedure. 1. Remove the packing and take the parts out of the carton. Confirm that all the parts o ...

  • Technics sx-PR604/M - page 139

    Symptoms which appear to be signs of trouble The fo llowing cha nges in perf ormance ma y occur in the Te chnics Keyboa rd but do not ind icate tr ouble. Phenome non Re medy Sounds and effects Th e button s, keys , etc. malf unct ion . • Turn off the POWER button once, th en turn it on again. If this proc edure is no t successf ul, turn of f the ...

  • Technics sx-PR604/M - page 140

    Phenome non Re medy COMP OSER Storag e is not pos sible. • Th e remaining me mory capacity of the CO MP OSE R is 0. Settin g th e tim e signa ture a nd num ber of measur es is not possible. • The t ime signat ure a nd num ber o f measur es can not b e change d for a pa ttern wh ich is currently recorded in t he COMPO SER . If you w ish to cha n ...

  • Technics sx-PR604/M - page 141

    Error messages No. C ontents 00 The dat a on the disk that you ar e using is for a diffe rent produc t. 01 An e rror h as occurr ed wh ile the disk was loadin g. Pleas e try again! 02 Th ere i s no di sk in th e Dis k Dri ve . 03 The file t hat you t ried to loa d is empty. 05 An err or has occ urre d while t he disk was savin g. Pleas e try again! ...

  • Technics sx-PR604/M - page 142

    Index A ADVANCED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 APC CONTROL (MIDI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 APC/SEQUENCER VOLUME . . . . . . . . . . . . . . . . . . . . . . . 50, 69 AUTO PLAY CHORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 AUTO P ...

  • Technics sx-PR604/M - page 143

    PART SELECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 PART SETTING (SOUND) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 PART SETTING (MIDI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 PATTERN COPY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Peda ...

  • Technics sx-PR604/M - page 144

    Specific ati ons SX-PR604/M SX-PR80 4/M KEYBOARD 88 KEYS SOUND GENERATOR PCM MAX. POL YPHONY 64 NOTES 128 NO TES SOUNDS NUMBER OF SOUNDS 1039 SOUNDS (1005 SOUNDS + 2 ORGAN DRAWBARS + 32 DRUM KI TS) 1123 SOUNDS (1082 SOUNDS + 2 ORGAN DRAWBARS + 39 DRUM KI TS) PIANO GROUP GRAND, UPRIGHT, ELECTRIC, M ODERN SOUND GROUP GUITAR & HARPSI, STRI NG S, B ...

  • Technics sx-PR604/M - page 145

    SX-PR604/M SX-PR80 4/M REVERB & EFFECT TONE CONTROL, REVERB, CHORUS, MULT I, SOUND LOAD OPTION, MIXER CUSTOMIZ E DISPLAY TI MEOUT, DATA PRO TECTION, FAVORI TES SETTING, MIDI SETTING L OAD OPTI O N, LANGUAGE SETTING, DISK PREFERENCE DISPLAY TI MEOUT, DATA PRO TECTION, FAVORI TES SETTING, MIDI SETTING L OAD OPTI O N, LANGUAGE SETTING, DISK PREFER ...

  • Technics sx-PR604/M - page 146

    Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively referred to as “ the warrantor ” ) will, for the length of the period indicated on the chart below, which starts with the date of original purchase ( ? ...

  • Technics sx-PR604/M - page 147

    147 QQTG0665 ...

  • Technics sx-PR604/M - page 148

    ENGLISH QQTG0665 Se0402S0 Matsushita Electric Industrial Co., Ltd. Web Site: http://www.panasonic.co.jp/global/ Printed in Japan ...

Manufacturer Technics Category Electronic Keyboard

Documents that we receive from a manufacturer of a Technics sx-PR604/M can be divided into several groups. They are, among others:
- Technics technical drawings
- sx-PR604/M manuals
- Technics product data sheets
- information booklets
- or energy labels Technics sx-PR604/M
All of them are important, but the most important information from the point of view of use of the device are in the user manual Technics sx-PR604/M.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Technics sx-PR604/M, service manual, brief instructions and user manuals Technics sx-PR604/M. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Technics sx-PR604/M.

Similar manuals

A complete manual for the device Technics sx-PR604/M, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Technics sx-PR604/M by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Technics sx-PR604/M.

A complete Technics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Technics sx-PR604/M - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Technics sx-PR604/M, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Technics sx-PR604/M, that we can find in the current document
3. Tips how to use the basic functions of the device Technics sx-PR604/M - which should help us in our first steps of using Technics sx-PR604/M
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Technics sx-PR604/M
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Technics sx-PR604/M in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Technics sx-PR604/M?

Use the form below

If you did not solve your problem by using a manual Technics sx-PR604/M, ask a question using the form below. If a user had a similar problem with Technics sx-PR604/M it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)