English dropdown-ico

Manual Manley Labs 120 Watt Monoblock Amplifier

10 pages 0.03 mb
Download

Go to site of 10

Summary
  • Manley Labs 120 Watt Monoblock Amplifier - page 1

    MANLEY LABORATORIES, INC. OWNER'S MANUAL MANLEY 120 W ATT MONOBLOCK AMPLIFIER Manley Laboratories, Inc. 13880 Magnolia Ave. Chino, CA. 91710 tel: (909) 627-4256 fax: (909) 628-2482 emanley@manleylabs.com http://www.manleylabs.com ...

  • Manley Labs 120 Watt Monoblock Amplifier - page 2

    CONTENTS INTRODUCTION 3 MAINS CONNECTIONS 4 CONNECTING YOUR AMPLIFIER 5 BIAS PROCEDURES 6 OPERATIONAL NOTES 7 SPECIFICATIONS 8 WARRANTY 9 WARRANTY REGISTRATION 10 SECTION PAGE ...

  • Manley Labs 120 Watt Monoblock Amplifier - page 3

    THANK YOU!... for choosing the Manley 120 Watt Monoblock Amplifiers. Designed around the concept that less is more, the Manley 120 Watt Monoblock Amplifiers very fine components, with the shortest and cleanest signal path possible, and with the use of our own milling equipment we can provide you with an amplifier that looks as good as it sounds. We ...

  • Manley Labs 120 Watt Monoblock Amplifier - page 4

    MAINS CONNECTIONS Your amplifier has been factory set to the correct mains voltage for your country. The voltage setting is marked on the serial badge, located on the rear panel. Check that this complies with your local supply. Export units for certain markets have a moulded mains plug fitted to comply with local requirements. If your unit does not ...

  • Manley Labs 120 Watt Monoblock Amplifier - page 5

    CONNECTING YOUR AMPLIFIER IMPORTANT: PLUG IN THE TUBES. We do not ship the amps with the output tubes inserted to prevent breakage. Before plugging in anything, locate the 2 tubes (KT-90s or 6550s) packed with the amp and insert them in the two large tube sockets. The sockets are marked 1 and 2, the tubes are marked 1 and 2 - Put 1 in 1 and 2 in 2. ...

  • Manley Labs 120 Watt Monoblock Amplifier - page 6

    BIAS PROCEDURES The Manley 120 Watt Amplfier uses a variable "fixed bias" system that requires very little attention. If you wish to adjust or check the bias, complete the following steps. For this procedure you will need a multimeter to read millivolts (less than 2 volt range) and a small flat screwdriver. 1. Looking at the front section ...

  • Manley Labs 120 Watt Monoblock Amplifier - page 7

    OPERATIONAL NOTES SWITCHING ON The power switch is located on the lower left hand corner of the front panel. Push the top of the rocker switch (1) to turn on the amplifier and the bottom of the rocker to turn off the amplifier. The LED on the right side of the front panel will illuminate indicating that the amplifier is operating. Do not turn on an ...

  • Manley Labs 120 Watt Monoblock Amplifier - page 8

    SPECIFICA TIONS Vacuum Tubes: 2 x KT-90 or 6550 (or good KT-88) , 1 x 5751, 1 x 7044 Output Power 120 Watts tetrode, 65 triode Frequency Response, +/- 1 dB 20 Hz - 50 KHz Input Sensitivity 1 Volt nominal Input Impedance 100 KOhm Load Impedance 5 Ohm. Factory preset for 5 Ohm S/N Ratio @100W -100 dB Power Consumption 120 Watts Quiescent 360 Watts Fu ...

  • Manley Labs 120 Watt Monoblock Amplifier - page 9

    W ARRANTY All Manley Laboratories equipment is covered by a limited warranty against defects in materials and workmanship for a period of 90 days from date of purchase to the original purchaser only. A further optional limited 5 year warranty is available to the original purchaser upon proper registration of ownership within 30 days of date of firs ...

  • Manley Labs 120 Watt Monoblock Amplifier - page 10

    WARRANTY REGISTRATION We ask that you please fill out this registration form and send the bottom half to: MANLEY LABORATORIES REGISTRATION DEPARTMENT 13880 MAGNOLIA AVE. CHINO CA, 91710 Or you may FAX it to: 909-628-2482 Registration entitles you to product support, full warranty benefits, and notice of product enhancements and upgrades. You MUST c ...

Manufacturer Manley Labs Category Stereo Amplifier

Documents that we receive from a manufacturer of a Manley Labs 120 Watt Monoblock Amplifier can be divided into several groups. They are, among others:
- Manley Labs technical drawings
- 120 Watt Monoblock Amplifier manuals
- Manley Labs product data sheets
- information booklets
- or energy labels Manley Labs 120 Watt Monoblock Amplifier
All of them are important, but the most important information from the point of view of use of the device are in the user manual Manley Labs 120 Watt Monoblock Amplifier.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Manley Labs 120 Watt Monoblock Amplifier, service manual, brief instructions and user manuals Manley Labs 120 Watt Monoblock Amplifier. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Manley Labs 120 Watt Monoblock Amplifier.

Similar manuals

A complete manual for the device Manley Labs 120 Watt Monoblock Amplifier, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Manley Labs 120 Watt Monoblock Amplifier by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Manley Labs 120 Watt Monoblock Amplifier.

A complete Manley Labs manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Manley Labs 120 Watt Monoblock Amplifier - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Manley Labs 120 Watt Monoblock Amplifier, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Manley Labs 120 Watt Monoblock Amplifier, that we can find in the current document
3. Tips how to use the basic functions of the device Manley Labs 120 Watt Monoblock Amplifier - which should help us in our first steps of using Manley Labs 120 Watt Monoblock Amplifier
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Manley Labs 120 Watt Monoblock Amplifier
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Manley Labs 120 Watt Monoblock Amplifier in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Manley Labs 120 Watt Monoblock Amplifier?

Use the form below

If you did not solve your problem by using a manual Manley Labs 120 Watt Monoblock Amplifier, ask a question using the form below. If a user had a similar problem with Manley Labs 120 Watt Monoblock Amplifier it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)