-
SonicWALL EM5000 - page 1
PROTECTION AT THE SPEED OF BUSINESS ™ UMA E M 5 0 00 G ett ing Star ted Gu ide ...
-
SonicWALL EM5000 - page 2
SonicWALL UMA EM5000Getting Started Guide Page i SonicW ALL UMA EM5000 Getting Started Guide This Getting St arted Guide contains inst allation procedures and configuration guidelines for deploying the SonicW ALL Universal M anagement Appliance EM 5000 (SonicW ALL UMA EM5000) in your networ k. The SonicW ALL UMA EM5000 ru ns SonicW ALL Global Manag ...
-
SonicWALL EM5000 - page 3
Page ii Document Conten ts Document Contents This document contains the following sections: Before Y ou Begin - p age 1 Connecting and Initializin g th e UMA EM5000 - pa ge 9 Registering Y our Appliance - page 19 Configuring the Role of Y our Appliance - page 23 Using the SonicW ALL GMS Management Interface - page 41 Managing SonicWALL Appliances - ...
-
SonicWALL EM5000 - page 4
Page 1 Befor e Y ou Begin In this Section: This section provides pre - configuration informati on before setting up your SonicWALL UMA EM5000. • Checking Package Contents - page 2 • Overview of the SonicW ALL UMA EM5000 - page 3 • System Requirements - page 5 • Recording Configuration Information - p age 8 1 ...
-
SonicWALL EM5000 - page 5
Page 2 Checking Package Contents Checking Package Contents Before setting up your SonicWALL UMA EM5000, verify that your package contains the following part s: SonicW ALL UMA EM5000 Getting S tarted Guide Crossover Cable Ethernet Cable 1 2 3 4 S tandard Power Cord* Front Bezel Keys Rack Mounting Kit (not pictured) 5 6 7 Any Items Missing? If any it ...
-
SonicWALL EM5000 - page 6
Page 3 Overview of the SonicWALL UMA EM5000 Overview of the SonicW ALL UMA EM5000 Front Panel • Pressing the reset button for several seconds will result in a reboot of the SonicWALL UMA EM5000. • Do not plug devices into any ports (other than those indicated) unl ess explicitly instructed to do so by a So nicW ALL technical support representat ...
-
SonicWALL EM5000 - page 7
Page 4 Overview of the SonicWALL UMA EM5000 Rear Panel For future use USB Ports (2) Power Supply Provides power connection using the supplied power cables Ethernet Port 0 (Management/LAN) Provides configurable Gigabit-capable Ethernet connection to your local network Provides access to a command line interface (CLI) for SonicWALL technical support ...
-
SonicWALL EM5000 - page 8
SonicWALL UMA EM5000 Getting Started Guide Page 5 System Requirements The SonicW ALL UMA EM5000 comes with a default license to manage 10 nod es. Y ou can purchase additional licenses on MySonicW ALL. For more information on licensing additiona l nodes, visit: http://www .sonicwal l.com/us/Products_Solutions.html Database Requir ements The SonicW A ...
-
SonicWALL EM5000 - page 9
Page 6 System Requirements SonicW ALL Platform and Firmwar e Support Legacy or older-generation models are no t supported, such as, SonicW ALL XPRS/XPRS2, Soni cW ALL SOHO2, SonicW ALL T ele2, and SonicWALL PRO-VX. For the most recent platform sup port and firmware version information, refe r to the latest SonicW ALL UMA EM5000 Getting S tart ed Gu ...
-
SonicWALL EM5000 - page 10
SonicWALL UMA EM5000 Getting Started Guide Page 7 GMS Gateway Rec ommendations A GMS gateway is a Soni cW ALL U T M appliance that allows for secure communication between the SonicWALL UMA EM5000 and managed appliance(s) using VPN tunnel s. A GMS gateway is not required in all deployment scenarios, as described in this section. When deployed, the G ...
-
SonicWALL EM5000 - page 11
Page 8 Recording Configuration Information Recording Configuration Information Before deploying the SonicW ALL UMA EM50 00, record the fo llowing configuration informatio n for your reference. SMTP Serv er Addres s : The IP address or host name of your Simple Mail Transfer Protocol (SMTP) server . For example, mail.emailprovider .com. HTTP Web Serv ...
-
SonicWALL EM5000 - page 12
SonicWALL UMA EM5000 Getting Started Guide Page 9 Connecting and Initializing the UMA EM5000 In this Section: This section provides in structions for powering on your SonicWALL UMA EM5000, logging into the ap pliance management interface, running the Host Configura ti on T ool, and then co nnecting the appli ance to your local network. • Powering ...
-
SonicWALL EM5000 - page 13
Page 10 Powering On Your Appliance Powering On Y our Appliance Perform the following steps to turn on your SonicW ALL UMA EM5000 appliance: 1. Plug the supplied power cable into the back of the SonicW ALL UMA EM5000. 2. Plug the other end of the power cable into an AC socket. The SonicW ALL UMA EM5000 automatically power s on and begins the initial ...
-
SonicWALL EM5000 - page 14
SonicWALL UMA EM5000 Getting Started Gui de Page 11 3. Open a Web browser on your management computer . 4. Enter http://192.168.168.169 /appliance/ (the default IP address of the SonicWALL UMA EM5 000) in the Loc ation or Address bar . The SonicW ALL UMA EM5000 appliance management login scree n displays. Note: One or more security warnings may dis ...
-
SonicWALL EM5000 - page 15
Page 12 Using the Host Configura tion Tool Using the Host Configuration T ool The Host Configuration T ool is a wizard that takes you through several basic steps to get your SonicWALL UMA EM5000 configured for your n etwork. The wizard starts automatically af ter you log in for the first time and change the admin password. Y ou can cancel the wizar ...
-
SonicWALL EM5000 - page 16
SonicWALL UMA EM5000 Getting Started Gui de Page 13 3. In the Network Settings screen, configure the network settings for the SonicW ALL U MA EM5000, and the n click Next . Enter network settings values fo r the following fields: • Hostname – A descriptive name for this app liance • Domain – In the form of “sonicwall.com”; this domain i ...
-
SonicWALL EM5000 - page 17
Page 14 Using the Host Configura tion Tool 5. In the Summary screen, verify the settings. Click Back to make changes on a previous screen, or click Apply to accept the settings. 6. W ait for the settings to be applied, possibly for a few minutes. The screen displ ays a progress bar until it finishes, and then displays the status. Note: If you modif ...
-
SonicWALL EM5000 - page 18
SonicWALL UMA EM5000 Getting Started Gui de Page 15 Connecting the SonicW ALL UMA EM5000 to Y our Network T o connect the SonicWALL UMA EM5000 to your network and access the appliance management interface from a management computer o n your LAN, perform the following steps: 1. If you are using the same management computer that you used for initial ...
-
SonicWALL EM5000 - page 19
Page 16 Connecting the Son i cWALL UMA EM50 00 to Your Network The following network diagram illustrates how the SonicWALL UMA EM500 0 co nnect s to an example network: San Jose, USA Management Console UMA Appliance / Database X0 X1 X2 X3 X4 X5 X6 link/spd X0 X1 X2 X3 X4 X5 X6 activity TZ 210 X0 X1 X2 X3 X4 X5 X6 Universal Management Appliance UMA ...
-
SonicWALL EM5000 - page 20
SonicWALL UMA EM5000 Getting Started Gui de Page 17 Configuri ng a Static IP Address on Y our Management Computer This section is prov ided for your reference when preparing to log in for the first time to your SonicW ALL UMA EM5000. Complete the followin g step s to configure your man agement computer with a static IP address: Windows Vista 1. On ...
-
SonicWALL EM5000 - page 21
Page 18 ...
-
SonicWALL EM5000 - page 22
SonicWALL UMA EM5000 Getting Started Gui de Page 19 Register ing Y our Appliance In this Section: This section provides instruct ions for registering your SonicW ALL UMA EM5000 appliance. • Creating a MySonicWALL Account - page 20 • Registering Y our Appliance - page 20 • Registering as an Associated Componen t - p age 22 3 ...
-
SonicWALL EM5000 - page 23
Page 20 Creating a MySonicWALL Account Creating a MySonicW ALL Account A MySonicW ALL account is require d fo r pro duct registration. If you already have an account, continue to the Re gistering Y our Appliance section. Perform the fo llowing steps to create a MySonicW ALL account: 1. In your browser , navigate to www .mysonicwall.com. 2. In the l ...
-
SonicWALL EM5000 - page 24
SonicWALL UMA EM5000 Getting Started Gui de Page 21 3. T ype a descrip tive name for the appliance into the Friendly Name field and then click Submit . The Serial Number field is automatic ally p opulated. Note: If this is t he first SonicWALL UMA EM5000 t hat you have registered, the Friendly Name for this applian ce will also be used as the name ...
-
SonicWALL EM5000 - page 25
Page 22 Registering as an Associated Component Registering as an Associated Component When you have a distribute d SonicW ALL GMS deployme nt involving more than one appliance or software instance of SonicW ALL GMS, you can associate these components on MySonicW ALL. Note: The default 10-node managemen t license is not automatically increased wh en ...
-
SonicWALL EM5000 - page 26
SonicWALL UMA EM5000 Getting Started Gui de Page 23 Configur ing the Role of Y our Appliance In this Section: This section provide s information about configuring the ro le for your SonicW ALL UMA EM5000, as well as informa tion about deployme nt settings and services. • Overview of SonicW ALL UMA EM5000 Roles - page 2 4 • Using the Role Config ...
-
SonicWALL EM5000 - page 27
Page 24 Overview of SonicWALL UMA EM5000 Roles Overview of SonicW ALL UMA EM5000 Roles The role that you assign to your SonicWALL UMA EM5000 defines the SonicW ALL Universa l Management Suite services that it will pro vide. SonicW ALL GMS use s these services to perform management, monitori ng, and reporting tasks. Y our Soni cW ALL UMA EM500 0 can ...
-
SonicWALL EM5000 - page 28
SonicWALL UMA EM5000 Getting Started Gui de Page 25 The initial Depl oyment > Role page is shown below: Using the Role Configuration T ool The Role Configuration T ool is a wizard that guides you through the process of defining the deployment role for your SonicW ALL UMA EM5000 appliance. Y our system must be registered and licensed for Son icW ...
-
SonicWALL EM5000 - page 29
Page 26 Using the Role Confi guration Tool •T h e Wizards button in the top right corner of the page provides access to th e Role Configuration T ool. T o use the Role Con f iguration T ool, perform the following steps: 1. Log in to the appliance managemen t interface an d navigate to the System > St atus page. 2. Click the Click here lin k at ...
-
SonicWALL EM5000 - page 30
SonicWALL UMA EM5000 Getting Started Gui de Page 27 4. In the Setup T ype page, select Ye s if you are addin g thi s system to an existing SonicWALL GMS deployment on one or more systems. Selecting Y es indicates to th e wizard that there is an existing SonicWALL GMS dat abase on another server . Select No if th is appli ance is p art of a new Soni ...
-
SonicWALL EM5000 - page 31
Page 28 Using the Role Confi guration Tool 7. In the Database Configurat ion page, enter the database parameters that are required for the selected role. The database fields will vary depending on your previous selections. Certain fields will be prepopulated if you made a choi ce of role that automatically include s the MySQL database or if you cho ...
-
SonicWALL EM5000 - page 32
SonicWALL UMA EM5000 Getting Started Gui de Page 29 8. When finished entering the database parameters, click Next . 9. In the Other Configu r ation page, the fields vary depending on the selected role, as follows: • Gateway Paramete rs – Required for All in One, Console, and Agent roles • Syslog Server Parameters - Requ ired for All in One, C ...
-
SonicWALL EM5000 - page 33
Page 30 Using the Role Confi guration Tool 14. W ait for the settings to be applied. The screen d isplays a progress bar until it finishes, an d th en displays the st atus. This phase can take up to 10 minutes, especially if the database was included in the deployment. 15. Click Close to exit the Role Configuration T ool. ...
-
SonicWALL EM5000 - page 34
SonicWALL UMA EM5000 Getting Started Gui de Page 31 Manually Configuring the System Role Y ou can con fig ure the role of the SonicW ALL UMA EM5 000 appliance without using the Role Configuration T ool. All role configuration is perfo rmed in the appl iance management interface, available at the URL: http: // <IP address> : <port> /a pp ...
-
SonicWALL EM5000 - page 35
Page 32 Manually Con figuring the System Role T o deploy your SonicWALL UMA EM5 000 in the All In One role, perform the following steps in the appliance management interface: 1. Navigate to the De ployment > Role page. Under Host Role Configuration , select the All In One radio bu tt on . 2. If this SonicW ALL UMA EM5000 will connect to managed ...
-
SonicWALL EM5000 - page 36
SonicWALL UMA EM5000 Getting Started Gui de Page 33 Configuring the Console Ro le The Console role is used in a multi-server , distributed SonicW ALL GMS deplo yment. In this role, the SonicW ALL UMA EM5000 will run all SonicWALL Universal Management Suite services except for the Database service. In this sce nario, the Database role is assigned to ...
-
SonicWALL EM5000 - page 37
Page 34 Manually Con figuring the System Role Configuring the Agent Role The Agent role can be used in a distributed deplo yment of SonicW ALL GMS. The primary functi ons of this role include the following: • Manages units by acquiring them, pushing configuration tasks to the units and tra cking their up/do wn status • Performs monitoring based ...
-
SonicWALL EM5000 - page 38
SonicWALL UMA EM5000 Getting Started Gui de Page 35 Configuring the Monitor Role The Monitor role is used to dedicate the SonicWALL UMA EM5000 to monitoring applian c es and applications in a multi - server SonicW ALL GMS deployment. The monitoring is based on ICMP probes, TCP probes, and SNMP OID retrievals. Only the SonicW ALL Universal Managemen ...
-
SonicWALL EM5000 - page 39
Page 36 Manually Con figuring the System Role T o deploy your So nicW ALL UMA EM5000 in the Syslog Collector role, perform the following steps in the appliance management interfac e: 1. Navigate to the De ployment > Role page. Under Host Role Configuration , select the Syslog Collector radio button. 2. If this SonicW ALL UMA EM5000 listens for s ...
-
SonicWALL EM5000 - page 40
SonicWALL UMA EM5000 Getting Started Gui de Page 37 T o configure the database settings for any role, perform the following steps in the appliance manage ment interface: 1. Navigate to the De ployment > Role page and select the role for this appliance. 2. T o run the MySQL d at abase on this SonicWALL UMA EM5000, select the Include Database (MYS ...
-
SonicWALL EM5000 - page 41
Page 38 Configuring Deployment Se ttings Configuri ng Deployment Settings This section describes the settings available on the Deployment > Setti ngs page of the appliance management interface. Configuring Web Port Settings T o change the Web port settings, p erform the following steps: 1. On the Deployment > Settings page under Web Por t Con ...
-
SonicWALL EM5000 - page 42
SonicWALL UMA EM5000 Getting Started Gui de Page 39 Starting and Stopping Host Services Y ou can stop, start, or restart any of the SonicW ALL UMS services on the Deployment > Services page of the appliance management interface. T he p a ge displays different services depending on the ro le of the appliance. The image b elow shows all nine servi ...
-
SonicWALL EM5000 - page 43
Page 40 Starti ng and Stopping Host Services ...
-
SonicWALL EM5000 - page 44
SonicWALL UMA EM5000 Getting Started Gui de Page 41 Using the SonicW ALL GMS Management Interface In this Section: This section provides informatio n abo ut the SonicW ALL GMS manage me nt interface. The Soni cW ALL GMS application runs on the SonicW ALL UMA EM5000. • Accessing the Correct Management Interface - page 42 • SonicW ALL GMS Managem ...
-
SonicWALL EM5000 - page 45
Page 42 Accessing the Correct Managemen t Interface Accessing the Correct Management Interface The SonicW ALL UMA EM5000 comes installed with two separate management interfaces: • SonicW ALL UMA Appliance Managem ent I nterface – Used for system management of the applianc e, including registration and licensing, setting the admin password, crea ...
-
SonicWALL EM5000 - page 46
SonicWALL UMA EM5000 Getting Started Gui de Page 43 Switching Between Manage ment Interfaces On appliances deployed in the All In One or Console role, you can easily switch between the appliance management interface and the SonicW ALL GMS management interface. The log in page of each interface provides a link to the login page of the other interfac ...
-
SonicWALL EM5000 - page 47
Page 44 SonicWALL GMS Login Scree n SonicW ALL GMS Login Screen The SonicW ALL GMS management interface login screen allows you to securely l ogin to SonicW AL L GMS using your User ID and Password. After you have registered your SonicW ALL UMA EM5000 and it is licensed for SonicWALL GMS, the SonicW ALL GMS login screen is the first screen that dis ...
-
SonicWALL EM5000 - page 48
SonicWALL UMA EM5000 Getting Started Gui de Page 45 Left Pane Overview The left pane of the SonicW ALL GMS management interface provides a tree control that displays the current view and a list of managed appliances within the current tab. The left p ane is only displayed for the three appliance tabs: Firewalls , SSL-VPNs and CDPs . The current cat ...
-
SonicWALL EM5000 - page 49
Page 46 Right P ane Overview Right Pane Overview The right pane displays the available status or tasks based on the current selection of navigati onal tab, lef t pane and center pane options. Configurations performed in the right pane modify global, group or appliance settings. For example, the right pane image below displays the status and tasks a ...
-
SonicWALL EM5000 - page 50
SonicWALL UMA EM5000 Getting Started Gui de Page 47 T wo blue boxes with a clock indicate that tasks are currently scheduled to execute at a future time on one or more appliances within the group. One blue box with a clock i ndicates that one or more tasks are scheduled on the appliance. One yellow box indicates t hat the appliance has been added t ...
-
SonicWALL EM5000 - page 51
Page 48 Description of Managed Applia nce States ...
-
SonicWALL EM5000 - page 52
SonicWALL UMA EM5000 Getting Started Gui de Page 49 Managing SonicW ALL Appliances In this Section: SonicW ALL appliances must be ru nning supported firmware to be managed using SonicW ALL GMS. For information about configurin g other SonicW ALL appliances for management, see the SonicWALL GMS Administrator ’ s Guide . This section provides instr ...
-
SonicWALL EM5000 - page 53
Page 50 Configuring a SonicWA LL NSA 2400 for Management Configuri ng a SonicW ALL NSA 2400 for Management The SonicWALL gateway security (firewall) appliance u nder management by SonicWALL GMS must be running So nicOS S tandard or Enhanced 2.0 or later . T o configure a SonicWALL appliance for SonicWALL GMS management, perform the following steps: ...
-
SonicWALL EM5000 - page 54
SonicWALL UMA EM5000 Getting Started Gui de Page 51 4. T ype the SonicWALL GMS sysl og server port in the GMS Syslog Server Port field. The default port is 514. 5. Leave the box next to Send Heartbeat St atu s Messages Only unchecked, unless yo u don’t want to receive reports for this managed appliance. 6. If your SonicWALL UMA EM5000 appliance i ...
-
SonicWALL EM5000 - page 55
Page 52 Configuring a SonicWA LL NSA 2400 for Management • If the SonicW ALL appliance will be manag ed th rough an existing tunnel or is on the same network as the SonicW ALL UMA EM5000 appli ance, select Existing Tu n n e l . V erify that a tunnel has been created between the SonicW ALL UMA EM5000 subnet and the appliance. • If the SonicW ALL ...
-
SonicWALL EM5000 - page 56
SonicWALL UMA EM5000 Getting Started Gui de Page 53 Adding a SonicW ALL NSA 2400 to SonicW ALL GMS T o add your appliance to SonicWALL GMS, perform the following steps: 1. Log in to the SonicW ALL GMS management interface. 2. Expand the SonicW ALL GMS tree and select the group to which you will add the SonicW ALL appliance. Then, righ t- click the ...
-
SonicWALL EM5000 - page 57
Page 54 Configuring a SonicWA LL SSL-VPN 2000 for Managemen t The new SonicW ALL appliance displays in the left pane of the SonicW ALL GMS interface as a yellow icon, which means the unit has not been acquired by SonicWALL GMS. Af ter the appliance has been acquired, the icon will eithe r turn red, indicating that the appli ance status is down, or ...
-
SonicWALL EM5000 - page 58
SonicWALL UMA EM5000 Getting Started Gui de Page 55 6. Enter the desired interval for sending heartbeats to the SonicW ALL GMS server , in seconds, in the Hear tbeat Interval (seconds) field. The maximum heartbeat interval is 86400 (24 hours). 7. Click Accept . Adding a SonicW ALL SSL-VPN 2000 to SonicWALL GMS T o add your appliance to th e SonicWA ...
-
SonicWALL EM5000 - page 59
Page 56 Configuring a SonicWA LL SSL-VPN 2000 for Managemen t The new SonicW ALL SSL-VPN appliance displays in the left pane of the SonicW ALL GMS interface as a yellow icon , which means the unit has not been acquire d by SonicWALL GMS. After the appliance has been acquired, the icon will either turn red, indicating that the applia nce status is d ...
-
SonicWALL EM5000 - page 60
SonicWALL UMA EM5000 Getting Started Gui de Page 57 Reporting In This Section: This section contains information about SonicW ALL Universal Management reporting. • Overview of SonicWALL GMS Reporting - page 58 • Using the SonicWALL GMS Summarize Now Feature - page 61 7 ...
-
SonicWALL EM5000 - page 61
Page 58 Overview of SonicWALL GMS Reportin g Overview of SonicW ALL GMS Reporting SonicW ALL GMS reporting complements SonicWALL GMS monitoring and other SonicWALL Internet security offerings by providing detailed and comprehensive reports of network activity . SonicW ALL GMS reporting allows you to review network access, enhance security , and ant ...
-
SonicWALL EM5000 - page 62
SonicWALL UMA EM5000 Getting Started Gui de Page 59 The SonicWALL GMS reporting feature receives its information from the stream of syslog data sent by each SonicW ALL appliance, processes the data, and stores it. SonicWALL GMS Reporting can be enabled or disabled. The SonicWALL GMS reporting module provides the follow ing information: • Custom r ...
-
SonicWALL EM5000 - page 63
Page 60 Overview of SonicWALL GMS Reportin g FTP Usage The amount of FTP usage that occurs through the selected appliances. Mail Usage The amount of mail usage tha t occurs through the selected SonicW ALL appliances. VPN Usage The amount of VPN usage that occurs through the selected SonicW ALL appliances. Att acks The number of attacks that were di ...
-
SonicWALL EM5000 - page 64
SonicWALL UMA EM5000 Getting Started Gui de Page 61 Using the SonicW ALL GMS Summarize Now Feature The Summ a r iz e Now feature allows the administrator to force the summarizer to proce s s all data received since the last summarization. This can be done i n order to display report data that has not yet been processed. The SonicWALL GMS Summarize ...
-
SonicWALL EM5000 - page 65
Page 62 Using the SonicWALL GMS Summar ize Now Feature 4. Navigate to Lo g > View Logs . Search for the message Report Data Summarized to verify that the Summarize Now action has completed. 5. When Summarize Now has comple te d, navigate to the Firewall or SSL-VPN t ab at the top of the screen. In the left-most pane, click GlobalView or click a ...
-
SonicWALL EM5000 - page 66
SonicWALL UMA EM5000 Getting Started Gui de Page 63 Monitor ing In this Section: This section contains information about SonicW ALL Universal Management monitoring. • Overview of SonicW ALL GMS Monitoring - p age 64 • Monitoring a SonicWALL NSA 2400 Using SNMP - page 65 • Monitoring an FTP Server Using Ping - page 71 8 ...
-
SonicWALL EM5000 - page 67
Page 64 Overview of SonicWALL GMS Monitori ng Over view of SonicWALL GMS Monitor ing The SonicW ALL GMS monitoring feature is used for re al-tim e monitoring of SonicW ALL appliances, VPN tunnels, network devices, and syslog informatio n. Monitoring critical network even ts and activity , such as security threats, ina ppropriate W eb use, and bandw ...
-
SonicWALL EM5000 - page 68
SonicWALL UMA EM5000 Getting Started Gui de Page 65 The SonicW ALL monitoring feat ure provides the following configur ab l e moni t ors: Monitoring a SonicW ALL NSA 2400 Using SNMP SonicW ALL GMS can monitor Simp le Network Management Protocol (SNMP)-capable SonicW ALL and non-SonicWALL devices. T o monitor a SonicW ALL NSA 2400 using SNMP , perfo ...
-
SonicWALL EM5000 - page 69
Page 66 Monitori ng a SonicWALL NSA 2400 Using SNMP Enabling SNMP on the T arget Appliance 1. Log in to the SonicW ALL NSA 2400. 2. Navigate to Syste m > Administration and select the Enable SNMP checkbox. SNMP is now configured. Note: If a SonicWALL appliance is already under SonicWALL GMS management, you can select the Enable SNMP checkbox and ...
-
SonicWALL EM5000 - page 70
SonicWALL UMA EM5000 Getting Started Gui de Page 67 Enabling SNMP Monitoring in SonicW ALL GMS Tip: You can also add appliances to Net Moni to r when you add the appliance by cli cking the checkbox next to Add this unit to Net Monitor . Alternatively, if an appliance is already added to SonicWALL GMS, you can right click the appliance an d select A ...
-
SonicWALL EM5000 - page 71
Page 68 Monitori ng a SonicWALL NSA 2400 Using SNMP 4. In the All Devices b y Views column, select the Sonicwall appliance and click the right arrow to add the device to the Selected GMS Devices column. 5. Click Next . The Add GMS Device Wizard Monitor Information page displays. ...
-
SonicWALL EM5000 - page 72
SonicWALL UMA EM5000 Getting Started Gui de Page 69 6. Select the Add a New Category rad io button and type in a category name, for example, Firewalls . 7. Select the priority of the SonicW ALL appliance(s) from the Category Priority list box, either High , Medium , or Low . 8. From the Monitor ing T ype drop-down , select SNMP . Ent er a Monitor P ...
-
SonicWALL EM5000 - page 73
Page 70 Monitori ng a SonicWALL NSA 2400 Using SNMP 10. Press the OK button to save the SNMP advanced settings. 1 1. S pecify how often, in seconds, the appliance will be tested in the Polling interval (in secs.) field. The default polling interval is 60 seconds. 12. S pecify the ideal response time of the appliance, in milliseconds, in the Ideal R ...
-
SonicWALL EM5000 - page 74
SonicWALL UMA EM5000 Getting Started Gui de Page 71 Monitoring an FTP Server Using Ping T o monitor an FTP se rver using Ping, add the ap pliance to SonicW ALL GMS, then perform the following tasks: 1. Click the Monit or tab at the top of the screen. 2. In the center pane, navigate to T o ols > Net Monitor . 3. Click the Add button and select Ad ...
-
SonicWALL EM5000 - page 75
Page 72 Monitoring an FTP Server Using Ping 7. Click Next . The Add Non-GMS Device Wizard Monitor Information page displays. 8. Select the radio button next to Add a New Category and type in a category name, for example, FTP . 9. Select the pri o ri ty of the FTP serv er fro m th e Ca tegory Priority list box, either High , Medium , or Lo w . 10. F ...
-
SonicWALL EM5000 - page 76
SonicWALL UMA EM5000 Getting Started Gui de Page 73 Fr ont Panel LCD Contr ols In this Section: This section provides informa tion about using the LCD c ontrols on the front panel of the SonicW ALL UMA EM5000. • Front Panel Control Features - page 74 • Using the Main Menu - page 74 • About the S tatus Menu - page 75 • Using the Configure Me ...
-
SonicWALL EM5000 - page 77
Page 74 Front P anel Control Features Front Panel Contr ol Features The SonicW ALL UMA EM5000 appliance is equipped with a front panel interface that allows an administrator to customize certain aspects of the appliance or simply monitor its st atus without having to log into it through a separate terminal. By default, the LCD display cycles throug ...
-
SonicWALL EM5000 - page 78
SonicWALL UMA EM5000 Getting Started Gui de Page 75 About the Status Menu The S tatus menu allows you to view sp ecific aspects of the appliance. The LCD cycles through the S tatus list by default when no other menu is in use. Y ou can also navigate the list using the Up and Down buttons. S t atus values in the list include the following: • Appli ...
-
SonicWALL EM5000 - page 79
Page 76 Using the Restart Opti on Using the Restart Option When you select Rest art from the Main Menu, you are asked to confirm the appliance restart. Press the Right button for yes or the Left button f or no. Using the Shutdown Option When you select Shut down from the Main Menu, you are asked to confirm the appliance shutdown. Press the Right bu ...
-
SonicWALL EM5000 - page 80
SonicWALL UMA EM5000 Getting Started Gui de Page 77 1 0 Support and T raining Options In this Section: This section provide s SonicW ALL support and training information. • Customer Support - page 78 • Knowledge Portal - page 78 • SonicW ALL Live Product Demos - page 79 • User Forums - page 80 • T raining - page 81 • Related T echnica l ...
-
SonicWALL EM5000 - page 81
Page 78 Customer Support Customer Support SonicW ALL offers W eb-based and telephone support to customers who have a va lid W arranty or who purch ased a Support Contract. Please review our W arranty Support Pol icy for product coverage. SonicW ALL also of fers a full range of consulting services to meet your needs, from our innovati ve implementat ...
-
SonicWALL EM5000 - page 82
SonicWALL UMA EM5000 Getting Started Gui de Page 79 SonicW ALL Live Product Demos The SonicW ALL Live Demo Site prov ides free te st drives of SonicW ALL security products and se rvices through interactive live product installations: • SonicW ALL GMS and ViewPoint • Unified Threat Management Platform • Secure Cellular Wireless • Continuous ...
-
SonicWALL EM5000 - page 83
Page 80 User Forums User Forums The SonicWALL User Forums is a resource that provides users the ability to communicate and discuss a variety of security and appliance subject ma tters. In this forum, the following categories are availa ble for users: • Content Security Manager topics • Continuous Data Protection topics • Email Security topics ...
-
SonicWALL EM5000 - page 84
SonicWALL UMA EM5000 Getting Started Gui de Page 81 T raining SonicW ALL offers an extensive sales and technical training curriculum for Network Administ rators, Security Experts and SonicW ALL Medallion Partners who need to enhance th eir knowledge and maximize their investment in SonicWALL Products and Security Applications. So nicW ALL Training ...
-
SonicWALL EM5000 - page 85
Page 82 Related Technical Documentation Related T echnical Documentation SonicW ALL user guide reference documentation is available at the SonicW ALL T echnical Documentation Online Libra ry: http://www .sonicwal l.com/us/Support.html The SonicW ALL Universal Management Appliance documentation set includes the following refere nce guides: • Sonic ...
-
SonicWALL EM5000 - page 86
SonicWALL UMA EM5000 Getting Started Gui de Page 83 SonicW ALL Secure W ireless Network Integrated Solutions Guide The Official Guide to SonicW AL L ’s market-leading wireless networking and security devices. This 512 page book is available in hardcopy . Order the book directly from Elsevier Publishing at: http://www .sonicwall.com/us/p roducts/r ...
-
SonicWALL EM5000 - page 87
Page 84 SonicWALL Secure Wireless Netwo rk Integrated Soluti ons Gui de ...
-
SonicWALL EM5000 - page 88
SonicWALL UMA EM5000 Getting Started Gui de Page 85 11 Pr oduct Safety and Regulatory Information In this Section: This section provides safety , regulato ry , trade mark, and copyright information. • Mounting the SonicWALL UMA EM5000 - page 86 • Montage-Anweisungen auf Deutsch - page 86 • Replacing a Single Hard Drive - page 87 • Safety an ...
-
SonicWALL EM5000 - page 89
Page 86 Mounting the SonicWALL UMA EM5000 Mounting the SonicW ALL UMA EM5000 When mounting your SonicWALL UMA EM5000: • Use the mounting hardware reco mmende d by the rack manufacturer and ensure that the rack is adequate for th e application. • Four mounting screws, compatible with the rack desi gn, must be used and hand tightened to ensure se ...
-
SonicWALL EM5000 - page 90
SonicWALL UMA EM5000 Getting Started Gui de Page 87 Replacing a Single Hard Dr ive Y ou can ord er a replaceme nt hard drive from SonicW AL L fo r your SonicW ALL UMA EM5000. The 750GB replacem ent hard drive can be inserted into any drive slot on your SonicWALL UMA EM5000. Y o u can insert the drive while the appliance is powered on. The front bez ...
-
SonicWALL EM5000 - page 91
Page 88 Replacing a Single Hard Drive Inserting the Rep lacement Drive into the SonicWALL UMA EM5000 Warning: Do not i nsert anything other than the SonicWALL approved hard drive into the SonicWALL UMA EM5000. T o view the hard drive array and insert the replacement dri ve into the SonicWALL UMA EM5000, perform the following steps: 1. Remove the ha ...
-
SonicWALL EM5000 - page 92
SonicWALL UMA EM5000 Getting Started Gui de Page 89 Safety and Regulatory Information Unauthor ized Ports Do not plug devices into any ports (other than those indicated) unless explicitly instructed to do so b y a SonicW ALL technical support representative. Doing so may void your warranty . Regulatory Model/ T ype Product Name 1RK19-066 UMA EM5000 ...
-
SonicWALL EM5000 - page 93
Page 90 FCC Part 15 Class A Notice FCC P ar t 15 Class A Notice This equipment was tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inte rference when the equipment is operated in a commercial enviro nment. This e ...
-
SonicWALL EM5000 - page 94
SonicWALL UMA EM5000 Getting Started Gui de Page 91 CISPR 22 (EN 55022) Class A Complies with EN 550 22 Class A and CISPR22 Class A. This is a class A product. In a d omestic environment, this product may cause radio interference in wh ich case the user ma y be required to take adequate measures. Regulatory Information f or Korea All products with ...
-
SonicWALL EM5000 - page 95
Page 92 Lithium Batter y Warning Lithium Battery W arning The Lithium Battery used in the SonicW ALL Internet security appliance may not be replaced by the user . The SonicW ALL must be returned to a SonicWALL authorized service center for replacement with the same o r equivalent type recommended by the manufacturer . If, for any rea son, the batte ...
-
SonicWALL EM5000 - page 96
SonicWALL UMA EM5000 Getting Started Gui de Page 93 Copyright Notice © 2009 SonicW ALL, Inc. All rights reserved. Under the copyright laws, this manual or the software described within, can not be copied, in w hole or part, without the written consent of the manufacturer , except in the normal use of the software to make a backup copy . The same p ...
-
SonicWALL EM5000 - page 97
Page 94 Trademarks ...
-
SonicWALL EM5000 - page 98
SonicWA LL, Inc. 1 14 3 Bo rregas Ave nue T + 1 4 08.745. 96 00 w ww.so nicw all.co m Sunny val e CA 94 089 - 1306 F + 1 40 8.7 45. 930 0 ©20 0 9 Son icWAL L, I nc. is a regi ste red t ra dema rk o f So nic WALL, Inc . O ther pro duc t na mes men tio ned here in m ay b e tr adem ark s a nd/o r re gist ered tra dem ark s o f th eir r esp ec tive co ...
Do you have a question concerning SonicWALL EM5000?
Use the form below
If you did not solve your problem by using a manual SonicWALL EM5000, ask a question using the form below. If a user had a similar problem with SonicWALL EM5000 it is likely that he will want to share the way to solve it.