English dropdown-ico

Manual Graco 245185

22 pages 0.54 mb
Download

Go to site of 22

Summary
  • Graco 245185 - page 1

    28:1/33:1 RA TIO, W ALL MOUNT Bulldog r Pumps For ambient temperature spray applications. Part No. 245187, 33:1, Series B 3300 psi (22.8 MPa, 228 bar) Maximum Fluid Working Pressure 100 psi (700 kPa, 7 bar) Maximum Air Input Pressure Part No. 253697, 28:1, Series A 2800 psi (19.3 MPa, 193 bar) Maximum Fluid Working Pressure 100 psi (700 kPa, 7 bar) ...

  • Graco 245185 - page 2

    2 307932 T able of Contents W arnings 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation/Maintenance 14 . . . . . . . . . . . . . . . . . . . . . . . . Parts 17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Graco 245185 - page 3

    3 307932 W ARNING SKIN INJECTION HAZARD Spray from the gun, leaks or ruptured components can inject fluid into your body and cause extremely serious injury , including the need for amputation. Fluid splashed in the eyes or on the skin can also cause serious injury .  Fluid injected into the skin might look like just a cut, but it is a serious in ...

  • Graco 245185 - page 4

    4 307932 W ARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in a fire or explosion and serious injury .  Ground the equipment and the object being sprayed. Refer to Grounding on page 5.  If there is any static sparking or you feel an electric shock while us ...

  • Graco 245185 - page 5

    5 307932 Installation General Information NOTE: Reference numbers and letters in parentheses in the text refer to the callouts in the figures and the parts drawing. NOTE: Always use Genuine Graco Parts and Acces- sories, available from your Graco distributor . Refer to the Product Data Sheet for your pump, Form No. 305791. If you supply your own ac ...

  • Graco 245185 - page 6

    6 307932 Installation Supplied Components Refer to Fig. 2 for a typical installation of an airless system. W ARNING A red-handled bleed-type master air valve (14) and a fluid drain valve (7) are supplied in your system. These accessories help reduce the risk of serious injury , including fluid injection and splashing of fluid in the eyes or on the ...

  • Graco 245185 - page 7

    7 307932 Installation E 01763A A C 14 8 G H 15 45 1 2 7 4 24 25 F D Fig. 2 KEY SUPPLIED COMPONENTS 1 Pump 2 Pump W all Bracket 4 Fluid Filter 7 Fluid Drain V alve (required) 8 Pump Air Regulator 14 Red Handled Bleed-T ype Master Air Valve (required, for pump) 15 Air Manifold 24 Suction Hose 25 Suction Tube 45 Ground Wire (required; see page 5 for i ...

  • Graco 245185 - page 8

    8 307932 Installation Models 245187 and 253697 (for Ambient T emperature Spray Applications) NOTE: Refer to page 10 to convert Pump Model 245187 or 253697 to a heated system. 1. Mount the pump wall bracket (2) 5 ft (1.5 m) above the floor . Be sure the wall is strong enough to support the weight of the pump and accessories, fluid, hoses, and stress ...

  • Graco 245185 - page 9

    9 307932 Installation Models 245185 and 245186 (for Heated T emperature Spray Applications) 1. Be sure the wall is strong enough to support the weight of the pump and accessories, heaters, hoses, fluid, and stress caused during operation. 2. Mount the pump wall bracket (2) 5 ft (1.5 m) above the floor . Refer to the Mounting Hole Layout on page 20. ...

  • Graco 245185 - page 10

    10 307932 Installation Converting to a Heated System T o convert Model 245187 or 253697 to a heated circulating system, order the following parts. The heaters are available in three voltages. Specify which voltage you desire.  Tw o V iscon HP Fluid Heaters – Model 245848 (120 V , single-phase, 19.2 amp) – Model 245863 (240 V , single-phase, ...

  • Graco 245185 - page 11

    11 307932 Installation 5. Screw the 3/4 npt street elbow (28*) into the pump’ s fluid outlet. Assemble the nipple (27*), check valve (29*), coupling (30*), and swivel (50*) as shown in Fig. 6. The arrow on the check valve must point down, toward the coupling. 6. Screw an elbow (32*) onto the lower heater ’s inlet. Screw the coupler (63) onto th ...

  • Graco 245185 - page 12

    12 307932 Installation Installing Circulating Kit 222312 W ARNING Before installing the heaters, dual heater mounting kit and circulating kit, follow the Pressure Relief Procedure on page 14. Disconnect all hoses from the pump. NOTE: Reference numbers marked with a symbol (for example, 37  ) are included in kit 222312. Apply pipe sealant (36  ...

  • Graco 245185 - page 13

    13 307932 Installation 1 2 7 4 5 6 25 24 26* 28* 27* 30* 31* 32* 32* 31* (Ref) 33* 38  40  39  41  1 2 3 4 Specify desired heater voltage (see page 10). Part of the heater (44). 5 29* 44 20 Connect to the main fluid supply line to the guns. Connect to the main fluid return line. 31* (Ref) 3 2 1 45 47 22 33* 34* 64* 37  21 22 39  4 ...

  • Graco 245185 - page 14

    Model 254187 Shown Fig. 7 U 4414B 14 307932 Operation/Maintenance Pressure Relief Procedure W ARNING SKIN INJECTION HAZARD The system pressure must be manually relieved to prevent the system from starting or spraying accidentally . Fluid under high pressure can be injected through the skin and cause serious injury . T o reduce the risk of an injury ...

  • Graco 245185 - page 15

    15 307932 Operation/Maintenance Starting and Adjusting the Pump 1. Be sure the air regulator and bleed-type master air valve are closed. NOTE: Do not install the spray tip yet! 2. Open the bleed-type master air valve. 3. Hold a metal part of the spray gun firmly to the side of a grounded metal pail and trigger the gun. 4. Slowly open the air regula ...

  • Graco 245185 - page 16

    16 307932 Operation/Maintenance Shutdown and Care of the Pump W ARNING T o reduce the risk of serious injury whenever you are instructed to relieve pressure, always follow the Pressure Relief Procedure on page 14. For overnight shutdown, stop the pump at the bottom of its stroke to prevent fluid from drying on the ex- posed displacement rod and dam ...

  • Graco 245185 - page 17

    05364 1 2 7 4 1 0 9 3 5 6 25 24 12 20 45 4 See Detail at left. 4 5 15 16 17 8 18 14 19 47 22 AIR REGULA TOR DET AIL 5 21 22 11 A A 53 52 54 17 307932 Parts Model 245187, 33:1, Series B Model 253697, 28:1, Series A Ref No. Part No. Description Qty 1 2451 17 33:1 BULLDOG PUMP (245187 only) See 309340 for parts 1 245167 28:1 BULLDOG PUMP (253697 only) ...

  • Graco 245185 - page 18

    18 307932 Parts Model 245185, Series A (240 V olt Heater) Model 245186, Series A (480 V olt Heater) Ref No. Part No. Description Qty Ref No. Part No. Description Qty 1 2451 17 33:1 BULLDOG PUMP See 309340 for parts 1 2 206294 BRACKET , wall, pump 1 4 218029 FLUID FIL TER See 307273 for parts 1 5 100509 PLUG, pipe, sq hd; 1/4 npt 4 6 150286 ADAPTER; ...

  • Graco 245185 - page 19

    19 307932 Parts Model 245185, Series A (240 V olt Heater) Model 245186, Series A (480 V olt Heater) 29a 29b 29c 29d 29e CHECK V AL VE DET AIL 1 2 3 4 Specify desired heater voltage (see page 10). Part of the heater (44). See Air Regulator Detail. 5 See Check V alve Detail. 6 5 15 16 17 8 18 14 19 AIR REGULA TOR DET AIL Connect to the main fluid sup ...

  • Graco 245185 - page 20

    20 307932 Mounting Hole Layout 7.375 in. (187 mm) 12.375 in. (314 mm) 15 in. (381 mm) 8.5 in. (216 mm) 6 in. (152 mm) 5 in. (127 mm) 7/16 in. diameter holes for pump wall bracket (mount 5 ft [1.5 m] above floor; refer to 306783 for instructions). M8 or 5/16 in. diameter holes for heater wall brackets (or use brackets as templates to mark wall). 6 i ...

  • Graco 245185 - page 21

    21 307932 T echnical Data Category Data Maximum fluid working pressure Model 245187: 3300 psi (228 bar , 22.8 MPa) Models 245185, 245186: 3000 psi (207 bar , 20.7 MPa) Model 253697: 2800 psi (193 bar , 19.3 MPa) Maximum air input pressure Models 245187, 253697: 100 psi (7 bar, 700 kPa) Model 245185, 245186: 90 psi (6 bar , 600 kPa) Ratio Models 245 ...

  • Graco 245185 - page 22

    22 307932 Graco Standard W arranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco w ill, for a period of twelve months from the ...

Manufacturer Graco Category Water Pump

Documents that we receive from a manufacturer of a Graco 245185 can be divided into several groups. They are, among others:
- Graco technical drawings
- 245185 manuals
- Graco product data sheets
- information booklets
- or energy labels Graco 245185
All of them are important, but the most important information from the point of view of use of the device are in the user manual Graco 245185.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Graco 245185, service manual, brief instructions and user manuals Graco 245185. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Graco 245185.

Similar manuals

A complete manual for the device Graco 245185, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Graco 245185 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Graco 245185.

A complete Graco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Graco 245185 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Graco 245185, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Graco 245185, that we can find in the current document
3. Tips how to use the basic functions of the device Graco 245185 - which should help us in our first steps of using Graco 245185
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Graco 245185
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Graco 245185 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Graco 245185?

Use the form below

If you did not solve your problem by using a manual Graco 245185, ask a question using the form below. If a user had a similar problem with Graco 245185 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)