English dropdown-ico

Manual Paradyne SAM2000G-12

10 pages 0.11 mb
Download

Go to site of 10

Summary
  • Paradyne SAM2000G-12 - page 1

    SAM2000G-12 12-Port SHDSL Access Multiplexer Also: SAM2000Q-12 (2B1Q) and SAM2000-12 (CAP) 1.0 SDSL ACCESS MODULE MODELS SDSL access multiplexers are in tended for use in Net to Net Te chnologies' IPD12000 and IPD4000 DSLAMs. Model types vary by the SDSL line code utilized. 1.1 SAM2000G-12 The SAM2000G-12 operates with Transmission Co nvergenc ...

  • Paradyne SAM2000G-12 - page 2

    2.0 INSTALLATION 2.1 Unpack and Inspect the SAM2000G If there is visible damage, do not attempt to conn ect the device; contact Customer Support at 1-877- 638-2638 (1-603-427-0600 for international customers) or support@nettonet.com . 2.2 Install the SAM2000G in an IP DSLAM Chassis Net to Net Technologies' IP DSLAM interface module s are hot s ...

  • Paradyne SAM2000G-12 - page 3

    (pins 13-25 and 38-50 are not used) 3.0 SAM2000G DEFAULT CONFIGURATIONS No configuration is necessary for the SAM2000G to operate at default settings. 3.1 IP DSLAM Management 3.1.1 User Access 3.1.1.1 Network Management System (NMS) and Command Line Interface (CLI) 3.1.1.2 Simple Network Management Protocol (SNMP) 3.1.2 Management Parameters The pa ...

  • Paradyne SAM2000G-12 - page 4

    3.2 SAM2000G Port Parameters 4.0 SAM2000G MANAGEMENT Once your SAM2000G has been installed, bandwidth and other configurations are software selectable via your IP DSLAM's MUM. Dependent upon the MUM mode l installed, the SAM2000G may be configured via Command Line Interface (CLI), Simple Network Ma nagement Protocol (SNM P) and/or Net to Net T ...

  • Paradyne SAM2000G-12 - page 5

    4.1 Via Command Li ne Interfac e (CLI) 4.1.1 Establish a Connection With Your IP DSLAM Establish a connection between your IP DSLAM and your PC, either directly (through the COM port on the MUM faceplate) or, if your DS LAM has been configured to allow inband management, across your local network. 4.1.2 Launch Your Terminal Emul ator Launch a termi ...

  • Paradyne SAM2000G-12 - page 6

    4.2.4 Log In Log in with your assigned us ernam e and password. For SAM200 0G configuration, you must log in as a superuser (general users have read only access). If your username and/or password are unknown, contact your System Administra tor or Information Technology Manager for assistance. Once you have logged in as a superuser, you will be able ...

  • Paradyne SAM2000G-12 - page 7

    The SAM2000G-12, SAM2000Q-12 and SAM2000-12 each have nine SHDSL bandwidth options; default is 272 kbps. Distance capabilities at each bandwidt h vary, dependent upon the type of line code being utilized. Distances listed below assume the use of 26 American Wire Gauge (AWG) cable; connections made with cable of a greater gauge will link up at gr ea ...

  • Paradyne SAM2000G-12 - page 8

    concurrently; SAM2000G configurations cannot be saved independently. Once your IP DSLAM has been configured as desired (including the SAM2000G), settings can be flash uploaded (to a local file) through a Trivial File Transfer Pr otocol (TFTP) tool with a GET command and the following information: 6.1.2.1 Backup An IP DSLAM backup file records ALL m ...

  • Paradyne SAM2000G-12 - page 9

    (A pulsing LED blinks steadily at a rate of once per second. A flashing LED blinks at a more rapid, less constant rate.) 6.3 Regulatory Complian ce for Class A Eq uipment The following regulatory compliance information applies to the SAM2000G-12, SAM2000Q-12 and/or SAM2000-12 as installed in Ne t to Net Technologies' IP DSLAMs. 6.3.1 US Federa ...

  • Paradyne SAM2000G-12 - page 10

    210-0000026 rev07 © Copyright 2003 Net to Net Technologies, Inc. ™ The Net to Net Logo i s a trade mark of Net to Net Te chnologie s, Inc. Worldwid e Headq uarters Net to Net Technologies 112 Corporate Drive Portsmouth, NH 03801 USA +1 877-638-2638 http://www.NetToNet.com/ Contact@NetToNet.com EMEA Headquarters Net to Net Technologies Victoria H ...

Manufacturer Paradyne Category Network Card

Documents that we receive from a manufacturer of a Paradyne SAM2000G-12 can be divided into several groups. They are, among others:
- Paradyne technical drawings
- SAM2000G-12 manuals
- Paradyne product data sheets
- information booklets
- or energy labels Paradyne SAM2000G-12
All of them are important, but the most important information from the point of view of use of the device are in the user manual Paradyne SAM2000G-12.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Paradyne SAM2000G-12, service manual, brief instructions and user manuals Paradyne SAM2000G-12. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Paradyne SAM2000G-12.

Similar manuals

A complete manual for the device Paradyne SAM2000G-12, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Paradyne SAM2000G-12 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Paradyne SAM2000G-12.

A complete Paradyne manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Paradyne SAM2000G-12 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Paradyne SAM2000G-12, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Paradyne SAM2000G-12, that we can find in the current document
3. Tips how to use the basic functions of the device Paradyne SAM2000G-12 - which should help us in our first steps of using Paradyne SAM2000G-12
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Paradyne SAM2000G-12
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Paradyne SAM2000G-12 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Paradyne SAM2000G-12?

Use the form below

If you did not solve your problem by using a manual Paradyne SAM2000G-12, ask a question using the form below. If a user had a similar problem with Paradyne SAM2000G-12 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)