English dropdown-ico

Manual Travis Industries 99200149

8 pages 1.46 mb
Download

Go to site of 8

Summary
  • Travis Industries 99200149 - page 1

    ZC Kit – Large Pellet Insert (99200149) Page 1 of 8 10/9/06 © Travis Industries, Inc. Compatibility • Astoria Bay Pellet Insert • Yankee Bay Pellet Insert Packing List • ZC Can Rear Panel • ZC Can Top/Side Panel • ZC Can Rear Vent Shield • (26) # 8 x 3/8” Type A Screws Overview This kit allows an installer to build the above pellet ...

  • Travis Industries 99200149 - page 2

    ZC Kit – Large Pellet Insert (99200149) Page 2 of 8 10/9/06 © Travis Industries, Inc. Vent Requirements • Must be 4" diameter Type "L" (except for masonry fireplace installations) - or - connect the vent to a factory built type "A" chimney. All vent joints (including adapters, elbows, etc…) must be sealed with 500° ...

  • Travis Industries 99200149 - page 3

    ZC Kit – Large Pellet Insert (99200149) Page 3 of 8 10/9/06 © Travis Industries, Inc. Vent Termination Requirements (See the illustration below) • Must have an approved cap (to prevent water from entering) or a 45 ° downturn. • If the termination is located on a windy side of the house, an approved house shield is recommended to prevent soo ...

  • Travis Industries 99200149 - page 4

    ZC Kit – Large Pellet Insert (99200149) Page 4 of 8 10/9/06 © Travis Industries, Inc. Minimum Enclosure Dimensions Min. Max. Recommended Height* 29 ” 31 ” ** 30 ” Width 36 ” 43 ” ** 40 ” Depth*** 18 ” 22 ” **** 20 ” * The enclosure height must be raised the same amount as the floor protection (e.g. if you are using 1 ” floor ...

  • Travis Industries 99200149 - page 5

    ZC Kit – Large Pellet Insert (99200149) Page 5 of 8 10/9/06 © Travis Industries, Inc. Minimum Floor Protection • The insert must be placed on a non-combustible floor protector (cement board, sheet metal, etc.) a minimum .018 ” thick (26 gauge). This floor protection must extend the full width and depth of the enclosure and must protrude 6 ? ...

  • Travis Industries 99200149 - page 6

    ZC Kit – Large Pellet Insert (99200149) Page 6 of 8 10/9/06 © Travis Industries, Inc. ZC Can Construction Construct the zc can as shown below. WARNING : The sheet metal edges are sharp. Use gloves when handling the zc can. Top of ZC Can Knock-out for top vent applications Use the included screws to secure the zc can sides and top to the zc can r ...

  • Travis Industries 99200149 - page 7

    ZC Kit – Large Pellet Insert (99200149) Page 7 of 8 10/9/06 © Travis Industries, Inc. ZC Can Placement • Place the zc can inside the enclosure. The zc can must be placed so the front edge of the mounting flanges are flush with the enclosure opening. Secure the enclosure to the floor protection (and sub-floor) with screws. • When venting hori ...

  • Travis Industries 99200149 - page 8

    ZC Kit – Large Pellet Insert (99200149) Page 8 of 8 10/9/06 © Travis Industries, Inc. Insert Preparation and Placement • Place the extending hopper into its highest position (see the manual for details). This increases the pellet capacity of the heater. • Install the surround panels onto the insert and slide it into place. The surround panel ...

Manufacturer Travis Industries Category Stove

Documents that we receive from a manufacturer of a Travis Industries 99200149 can be divided into several groups. They are, among others:
- Travis Industries technical drawings
- 99200149 manuals
- Travis Industries product data sheets
- information booklets
- or energy labels Travis Industries 99200149
All of them are important, but the most important information from the point of view of use of the device are in the user manual Travis Industries 99200149.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Travis Industries 99200149, service manual, brief instructions and user manuals Travis Industries 99200149. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Travis Industries 99200149.

Similar manuals

A complete manual for the device Travis Industries 99200149, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Travis Industries 99200149 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Travis Industries 99200149.

A complete Travis Industries manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Travis Industries 99200149 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Travis Industries 99200149, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Travis Industries 99200149, that we can find in the current document
3. Tips how to use the basic functions of the device Travis Industries 99200149 - which should help us in our first steps of using Travis Industries 99200149
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Travis Industries 99200149
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Travis Industries 99200149 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Travis Industries 99200149?

Use the form below

If you did not solve your problem by using a manual Travis Industries 99200149, ask a question using the form below. If a user had a similar problem with Travis Industries 99200149 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)