English dropdown-ico

Manual Fortec FS-4200

15 pages 3.06 mb
Download

Go to site of 15

Summary
  • Fortec FS-4200 - page 1

    ...

  • Fortec FS-4200 - page 2

    ...

  • Fortec FS-4200 - page 3

    A Digital Satellite Receiver is a convenient product that allows you to view a variety of programs provided through satellite. This user's guide covers the installation of the DSR and the necessary steps to implement various features. This also explains special features available only in this DSR in detail, which will allow you to make full of ...

  • Fortec FS-4200 - page 4

    For Y our Safety Be sure to turn the Receiver off and disconnect the AC power cord before cleaning the Receiver surface. If the surface is dirty, wipe clean with a cloth which has been dipped in a weak soap-and- water solution and wrung out thoroughly, and then wipe again with a dry cloth. Switch the receiver off whenever it remains out of service ...

  • Fortec FS-4200 - page 5

    RCU Key Function Turns power ON/OFF of the DSR When watching a channel, mute the sound Switches between TV and Radio mode 0~9 MENU EXIT OK, LIST PR+, PR- Enter number of the required menu item or select a channel number to watch Press this key one time to run menu onscreen Return to the previous menu on the menu screen or escape from the menu Press ...

  • Fortec FS-4200 - page 6

    Name and Function of Each Part on the Rear Panel(optional) 1. LNB IN: CONNECT TO SATELLITE ANTENNA 2. AUDIO(R)/AUDIO(L): CONNECT TO AUDIO R/L TO TV OR AUDIO TUNER 3. RF OUT : CONNECT TO TV ANTENNA OUTPUT 4. RS 232 :CONNECT TO A PC FOR S/W UPGRADE 5. TV: CONNECT TO TV USING A SCART CABLE 6. CVBS: COMPOSITE VIDEO BROADCAST SIGNAL Name and Function of ...

  • Fortec FS-4200 - page 7

    Main Menu This menu consists of 4 major main menus as follow. - Channel - Satellite - System - T ools During the installation the OK key confirms a selection and LIST key shows Down List Box if the column has mark. You can also use the numeric keys on the RCU to enter numeric value. Use the PR+ , PR- key to move upwards and downwards from one line ...

  • Fortec FS-4200 - page 8

    1)Press number key 1 to enter Delete window. Select the program and press OK key to mark this program with the deletion mark. You can cancel this mark by pressing OK key again. Press EXIT key to pop up the dialogue "Are you sure to save?". Select Yes button and press OK key to save, or select NO button and press OK key to exit without sav ...

  • Fortec FS-4200 - page 9

    1.2 Radio Channel The same operation as 1.1 TV Channel , here we don't explain any more. 2. Satellite 2.1 Add Satellite Satellite : Press OK key enter to the rename. In this option, you can input new satellite . LNB T ype: Select your LNB Type. If you have universal LNB, select Universal. Freq1: Press key to select Freq1. 1) Press PR+, PR- key ...

  • Fortec FS-4200 - page 10

    8 2.5 NIT Search Satellite : Press keys to select in circle. TP : Press keys to select proper TP . TP Frequency , Symbol Rate : Use numeric keys to input the proper value. Polarity : Select between H and V . Search : Select between All and Free. Edit Satellite : Operation same as 2.1. Add TP : Press OK key enter the Add TP . Satellite : Press keys ...

  • Fortec FS-4200 - page 11

    9 3.3 RF Channel Press OK key to enter into the RF Channel window. Press keys to select the RF in circle, while press PR+,PR-, keys to move the cursor up or down in circle. 1) RF System : Select among NTSC, P AL-B/G, P AL-I, P AL- D/K. 2) RF Channel : Under the NTSC condition, you can select between 14-83.P AL:21-69. 3.4 Auto Shut Down Press OK key ...

  • Fortec FS-4200 - page 12

    4.1 Information Press INFO key to the Information window. 3.7 Parent Lock Setup Before entering into the Parent Lock Setup window, you need input the correct password. The default password is 0000. Menu Lock :Press keys to select between YES and N0. Channel Lock :Press keys to select between YES and N0. New Password :User numeric key (0-9) to input ...

  • Fortec FS-4200 - page 13

    During the viewing, you can press PAUSE key to stop the picture while the volume continues. Y ou can play the picture by pressing PAUSE key once again. 5.6 Pause Press key to close the volume. You can press key once again to restore the volume, or press keys to open the volume. 5.5 Mute 1. During the viewing or listening, press OK key to pop up the ...

  • Fortec FS-4200 - page 14

    12 1. Press FAV key to pop up the favourite group window. 2. Press keys to select the favorite group. Press PR+, PR- keys to select the channel up or down.. Press OK key at the selected channel to view it in full-screen. Press MENU or EXIT key to exit. 3. If there is no favorite channel, system will inform " No FA V Channel!" when you pre ...

  • Fortec FS-4200 - page 15

    Problem Possible causes What to do The display on the front panel does not light up. No sound or picture, but the front panel shows red light. Main cable is not connected. The is in standby mode. receiver Check that the main cable is plugged into the power socket. Press the standby button. No sound or picture. The satellite dish is not pointing at ...

Manufacturer Fortec Category Satellite TV System

Documents that we receive from a manufacturer of a Fortec FS-4200 can be divided into several groups. They are, among others:
- Fortec technical drawings
- FS-4200 manuals
- Fortec product data sheets
- information booklets
- or energy labels Fortec FS-4200
All of them are important, but the most important information from the point of view of use of the device are in the user manual Fortec FS-4200.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Fortec FS-4200, service manual, brief instructions and user manuals Fortec FS-4200. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Fortec FS-4200.

Similar manuals

A complete manual for the device Fortec FS-4200, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Fortec FS-4200 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Fortec FS-4200.

A complete Fortec manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Fortec FS-4200 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Fortec FS-4200, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Fortec FS-4200, that we can find in the current document
3. Tips how to use the basic functions of the device Fortec FS-4200 - which should help us in our first steps of using Fortec FS-4200
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Fortec FS-4200
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Fortec FS-4200 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Fortec FS-4200?

Use the form below

If you did not solve your problem by using a manual Fortec FS-4200, ask a question using the form below. If a user had a similar problem with Fortec FS-4200 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)