Manual Jacuzzi Z301

16 pages 0.12 mb
Download

Go to site of 16

Summary
  • Jacuzzi Z301 - page 1

    Z101/301 ™ WHIRLPOOL BA TH R Owner's Manual ...

  • Jacuzzi Z301 - page 2

    IMPORT ANT SAFETY INFORMA TION READ AND FOLLOW ALL INSTRUCTIONS Read manufacturer’s safety information provided with all optional equipment. Warning — Risk of injury: Children, the elderly, and the infirm should not use the spa unless they are super- vised at all times. Infants should not be permitted in the spa at water temperatures over 100 ? ...

  • Jacuzzi Z301 - page 3

    Contents Specifications ___________________________________________________ 2 Installation Inspection and Shipping Claim _______________________________________ 3 Positioning Your Spa _______________________________________________ 3 Electrical Requirements ____________________________________________ 3 Outdoor/Indoor Installation _________________ ...

  • Jacuzzi Z301 - page 4

    SPECIFIC A TIONS Product specifications are subject to change without notice. DIMENSIONS 74-1/4" (1886 mm) L 62-5/16" (1582 mm) W 29" ( 737 mm) H PRODUCT WEIGHT 371 lb (169 kg) ELECTRICAL REQUIREMENTS* 115 VAC, 15 AMP, 60 Hz Requires Dedicated Separate Circuit. Equipped with GFCI Incorporated in Line Cord OPERATING GALLONAGE 192 U.S. ...

  • Jacuzzi Z301 - page 5

    INST ALLA TION Inspection and Shipping Claim Check for shipping damage upon receipt of the spa. Jacuzzi Whirlpool Bath is not responsible for damage to the spa sustained during shipping. If damage is evident before unpacking, refer to instructions regarding ship- ping claims on the outside of the carton and immediately file a claim with the carrier ...

  • Jacuzzi Z301 - page 6

    INST ALLA TION Outdoor Installation If you install the spa outdoors, we recommend that you provide a concrete pad for it to rest on. To do this, construct forms for a 4" thick level pad. Install a #10 gauge wire mesh 6" x 6" steel reinforced grid. Attach a #8 solid copper wire to the grid with a ground clamp. This wire should be long ...

  • Jacuzzi Z301 - page 7

    INST ALLA TION Equipment Set-Up 1. Remove the plastic sheet covering the spa. NOTE: Stepping into the spa with shoes will scratch the acrylic surface. 2. Remove any packing materials from the spa. 3. Remove the filter cartridge from its plastic bag. 4. Pull open the skimmer/filter door by the handle lo- cated in the middle of the door and remove th ...

  • Jacuzzi Z301 - page 8

    OPERA TION Operating Instructions Initial Instructions Using a garden hose, fill the spa with water to the water line indicator mark on the skimmer frame. WARNING: Do not provide power to the spa unless it is filled with water to the normal water level. Refer to water line indicator mark on skimmer frame. When- ever the power is ON, the system will ...

  • Jacuzzi Z301 - page 9

    OPERA TION 7 Normal Operation/Whirlpool Sys- tem You can enjoy the spa with or without activating the whirlpool. Either way, bathing in your spa can be pleasurable, as well as therapeutic. After a busy, stressful day, you can look forward to soaking in your spa in still water with no turbulence—only the gentle warmth of the soothing and relaxing ...

  • Jacuzzi Z301 - page 10

    MAINTEN ANCE 8 W ater Quality and W ater Chemistry Maintaining water quality and water chemistry in your spa is extremely important and should be a regular part of your spa maintenance program, as a neglected spa can be a breeding place for dangerous bacteria. The water quality of your spa is maintained by a combination of filtration and chemistry. ...

  • Jacuzzi Z301 - page 11

    MAINTEN ANCE Balancing pH For good hygiene and equipment longevity, main- tain the pH of your spa water according to the instruc- tions provided. pH is the measure to determine if the spa water is too acidic (low pH), or too alkaline (high pH). The ideal range for spa water is 7.4 to 7.6 pH. For excessive acidity (below 7.2 pH) add soda ash or sodi ...

  • Jacuzzi Z301 - page 12

    MAINTEN ANCE The suction cover located in the foot well area should be checked at least once a week for collected debris, such as leaves, hair, etc., and cleaned as necessary. It may not be necessary to remove the suction cover to clean it, but if you need to, remove the center screw with a Phillips screwdriver and clean the cover by flushing with ...

  • Jacuzzi Z301 - page 13

    MAINTEN ANCE Automatic Filtration/Maintenance If you plan to be away, minimum water quality will be maintained by running the filter system. If you will be away for an extended period, however, we recommend that you drain the spa (following the procedure described under Winterizing on this page), as long periods without maintenance of water quality ...

  • Jacuzzi Z301 - page 14

    MAINTEN ANCE 12 Covering Y our Spa An optional rigid spa cover for your spa is available from your Jacuzzi Whirlpool Bath dealer. Use of this cover will help to reduce energy costs by minimizing heat loss and evaporation. In addition, the attractive cover is an effective means of preventing debris such as leaves and dirt from entering your spa when ...

  • Jacuzzi Z301 - page 15

    Jacuzzi Whirlpool Bath Limited W arranty Z101/301 Spa Jacuzzi Whirlpool Bath P .O. Drawer J W alnut Creek, CA 94596-9885 WARRANTY COVERAGE Jacuzzi Whirlpool Bath (the “Company”) offers the following express limited warranty to the original purchaser of any Jacuzzi Whirlpool Bath Spa Line Product (“unit”) who purchases the product for person ...

  • Jacuzzi Z301 - page 16

    RESPONSIBILITIES OF OTHERS Inspecting the unit prior to installation is the responsibility of the installer or building contractor who acts on behalf of the user. They are responsible for ensuring the unit is free of defect or damage. Notices are placed on and in the unit and on the shipping carton advising the installer of this responsibility. In ...

Manufacturer Jacuzzi Category Indoor Furnishings

Documents that we receive from a manufacturer of a Jacuzzi Z301 can be divided into several groups. They are, among others:
- Jacuzzi technical drawings
- Z301 manuals
- Jacuzzi product data sheets
- information booklets
- or energy labels Jacuzzi Z301
All of them are important, but the most important information from the point of view of use of the device are in the user manual Jacuzzi Z301.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Jacuzzi Z301, service manual, brief instructions and user manuals Jacuzzi Z301. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Jacuzzi Z301.

Similar manuals

A complete manual for the device Jacuzzi Z301, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Jacuzzi Z301 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Jacuzzi Z301.

A complete Jacuzzi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Jacuzzi Z301 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Jacuzzi Z301, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Jacuzzi Z301, that we can find in the current document
3. Tips how to use the basic functions of the device Jacuzzi Z301 - which should help us in our first steps of using Jacuzzi Z301
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Jacuzzi Z301
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Jacuzzi Z301 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Jacuzzi Z301?

Use the form below

If you did not solve your problem by using a manual Jacuzzi Z301, ask a question using the form below. If a user had a similar problem with Jacuzzi Z301 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)