English dropdown-ico

Manual Kuppersbusch GMS 955.1

10 pages 0.62 mb
Download

Go to site of 10

Summary
  • Kuppersbusch GMS 955.1 - page 1

    Gas Cooktop Installation, User and Service Instructions GMS 955.1 ...

  • Kuppersbusch GMS 955.1 - page 2

    1 IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR ’ S USE. READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. OBSERVE ALL FEDERAL, STATE AND LOCAL C ODES AND ORDINANCES WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing Property damage, personal injury or death. Do not store or use gasoli ...

  • Kuppersbusch GMS 955.1 - page 3

    2 Gas Installation Requirements This appliance shall be installed by an authorized person and installed in accordance to The manufactures installation instructio ns. IMPORTANT: This Appliance must be installed in strict Compliance with all Federal, State and Local laws (Where applicable) In the absence of local codes, the installation must conform ...

  • Kuppersbusch GMS 955.1 - page 4

    3 Dimensions and D istances requirements C abinet overhead and side clearances The minimum overh ead clearances shall be in accordance with the minimum values indicated in Fig . 1 for square angle cuts and Fig. 2 for roun ded cuts . Minimum Clearances Inches Millimeters L2 1 9/16 ” 40 L3 3 3/8 ” 86 L4 18 ” 457 L5 24 ” 610 L6 13 ” 330 L7 3 ...

  • Kuppersbusch GMS 955.1 - page 5

    4 Overall and Cutout Dimensions Below are the required cutout di mensions and the overall dimensions of the cooktop as indicated in Fig. 4 Overall Cutout Inches Millimeters Inches Millimeters W 33 7/8 ” 860 W 33 1/16 ” 840 D 19 11/16 ” 500 D 18 7/8 ” 480 Gas tubing and electrical location Fig 5 shows the location of the gas supply and elect ...

  • Kuppersbusch GMS 955.1 - page 6

    5 Install the Cooktop into the cabinet. Install the supplied hold down brackets (A) to the underside of t he Cooktop using the supplied Phillips head screws (B) as shown in Fig. 6. Slide the hooks into position and secure the cooktop to the countertop. Trim any exposed gasket seal. Gas Connection Check the ‘ gas type ’ sticker attached to the C ...

  • Kuppersbusch GMS 955.1 - page 7

    6 Electrical Connection WARNING! This appliance is equipped wi th a three - prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded receptacle. Do not cut or remove the grounding prong from the plug. Please refer to Fig. 5 0n page 5 for the location of the e lectrical wall plug. This uni ...

  • Kuppersbusch GMS 955.1 - page 8

    7 By - pass jet adjustment for low flame setting 1) Turn the right front burner on to ignite. Once lit, turn to the lowest setting (small flame). 2) Remove the knob from the cookt op and place in a secured location . Locate t he adjustment screw shown in Fig. 8 in the center of the burner valve sha f t. 3) Using a small flat blade screwdriver, loca ...

  • Kuppersbusch GMS 955.1 - page 9

    8 User instructions WARNING! Keep the appliance area clear and free from combustible materials, gasoline and other flammable vapors and liquids . Do not store dangerous or flammable material in the cabinet areas above the appliance. Store all flammable materials In a safe lace to avoid potential hazards. For safe use of appliances, do not use this ...

  • Kuppersbusch GMS 955.1 - page 10

    9 Maintenance - Never use an abrasive cleaner - Before cleaning the ap pliance it is available that t he unit should be disconnected from the power supply . - Cleaning the work surface periodically . Clean the burner heads, the enameled steel pan supports and the burner caps using warn water and a mild detergent. Avoid using steel wool for the fibe ...

Manufacturer Kuppersbusch Category Cooktop

Documents that we receive from a manufacturer of a Kuppersbusch GMS 955.1 can be divided into several groups. They are, among others:
- Kuppersbusch technical drawings
- GMS 955.1 manuals
- Kuppersbusch product data sheets
- information booklets
- or energy labels Kuppersbusch GMS 955.1
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kuppersbusch GMS 955.1.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kuppersbusch GMS 955.1, service manual, brief instructions and user manuals Kuppersbusch GMS 955.1. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kuppersbusch GMS 955.1.

Similar manuals

A complete manual for the device Kuppersbusch GMS 955.1, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kuppersbusch GMS 955.1 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kuppersbusch GMS 955.1.

A complete Kuppersbusch manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kuppersbusch GMS 955.1 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kuppersbusch GMS 955.1, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kuppersbusch GMS 955.1, that we can find in the current document
3. Tips how to use the basic functions of the device Kuppersbusch GMS 955.1 - which should help us in our first steps of using Kuppersbusch GMS 955.1
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kuppersbusch GMS 955.1
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kuppersbusch GMS 955.1 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kuppersbusch GMS 955.1?

Use the form below

If you did not solve your problem by using a manual Kuppersbusch GMS 955.1, ask a question using the form below. If a user had a similar problem with Kuppersbusch GMS 955.1 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)