English dropdown-ico

Manual JVC TK-C215VP12

36 pages 2.64 mb
Download

Go to site of 36

Summary
  • JVC TK-C215VP12 - page 1

    DOME CAMERA TK-C215VP4 TK-C215VP12 INST ALLA TION PRECA UTIONS LST0474-001B T o installation contractor : Be sure to read the followings beforehand for pr oper in stalla- tion. Pass the manu al to user after reading. To u s e r : Please be sure to keep tog ether with the instruction ma nual after reading. TK-C215VP4_JP.book Page 1 Wednesday , Septe ...

  • JVC TK-C215VP12 - page 2

    Precautions rega rding fall prevention 䡵 Mounting screws f or the base Be sure to use M4 screw . 䡵 Mounting the fall pre vention wire Note: ● P a y attention to the length, strength, routing and material (insulation prope r ties) of the fall prev ention wire used. ● The intern al diameter of the rounded por tion on the camera unit to which ...

  • JVC TK-C215VP12 - page 3

    Precautions r egarding water-proof and dust-pr oof 䡵 Fill the hole with sealing material Fill the piping hole as well as the 2 mounting holes mounted with screws using a sealing material. Memo: ● Use GE silicon or its equivalents as the sealing material. Note: ● If the piping hole and the 2 mounting holes mounted with screws are not filled wi ...

  • JVC TK-C215VP12 - page 4

    Precautions r egarding water-proof and dust-pr oof (continued) 䡵 Precautions when mo unting the dome co ver ● Make sure that the dome cov er is fir mly fastened. Otherwise, the humidity lev el may rise, which may result in f ogging and ev en falling of the cov er . ● Ensure that the fall pre vention wire of the dome cover is not caught in the ...

  • JVC TK-C215VP12 - page 5

    DOME CAMERA TK-C215VP4 INSTR U CTIONS For Customer Use: Enter below the Se rial No. which is located on the body . Retain this inf ormation for future ref erence. Model No . TK-C215VP4 Serial No. LST0509-001A TK-C215VP4_JP.book Page 1 Wednesday , September 20, 2 006 5:48 PM ...

  • JVC TK-C215VP12 - page 6

    2 Intr oduction Safety Precautions RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION FOR USA AND CANADA Information for Users on Disposal of Old Equipment Attention: This symbol is only valid in the European Union. [European Union] This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its e ...

  • JVC TK-C215VP12 - page 7

    3 INFORMA TION FOR USA 䡵 INFORMA TION This equipment has been test ed and found to comply with the limits for a Class B digital device , pursuant to P ar t 15 of the FCC Rules. These limits are des igned to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate rad ...

  • JVC TK-C215VP12 - page 8

    4 Intr oduction 䢇 The unit is to be powered by a DC 12 V or an AC 24 V po wer supply . 䢇 The unit is to be powered by a UL Listed DC 12 V or an AC 24 V po wer supply . (F or U type) 䢇 The AC 24 V and 12 V DC power supply shall conform to the f ollowing: Class 2 only (F or USA), Isolated power supply only (F or Europe). 䢇 This installation s ...

  • JVC TK-C215VP12 - page 9

    5 These are general IMPORT ANT SAFEGU ARDS and cer tain items may not apply to all appliances. 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cle ...

  • JVC TK-C215VP12 - page 10

    6 Intr oduction Thank you f or pu rchasing this product. (These instructions are for: TK-C215VP4U/TK- C215V P4E.) Before beginning to oper ate this unit, please read the instruction manual carefully in order to make sure that the best possible perf or mance is obtained. 䡵 Excellent dust-proof and water -proo f performance With the dust-proof and ...

  • JVC TK-C215VP12 - page 11

    7 Intr oduction Safety Precautions .................................... 2 Characteristics .......................................... 6 T able of Contents ................................ ...... 7 Prec auti ons for pro per use of this product .................................. 8 Name of P ar ts ........................................... 9 Camera .. ...

  • JVC TK-C215VP12 - page 12

    8 Intr oduction Storage and Location of Use 䢇 Do not install this unit at the following locations. ● Places that are exposed to v a por or oil, such as kitchens. ● Places that exceed the ambient temperature ( - 10 I to 50 I ) ● Places at which corrosive gases are emitted ● Places at which radi ation or X-ra ys and strong radio wa ves or m ...

  • JVC TK-C215VP12 - page 13

    9 Camera A Mounting hole ⳯ 2 Use these when mounting the camera to the ceiling, wall or electrical box. ( A Pg. 17)( A Pg. 25) Note: ● T o mount the camera using the electrical bo x, consult the dealer from which this product is purchased or any nearby JVC dealer . B Hole for Connecting Cable and Piping This is a hole for dra wing out the conne ...

  • JVC TK-C215VP12 - page 14

    10 Intr oduction Camera (continued) G Base Mount the base to the ceiling, wall or electrical box bef ore mounting the camera. ( A Pg. 17)( A Pg. 25) H Fastening Screw f or Dome Cover This is a fastening scre w for the dome cov er. Use a supplied wrench to fasten/unf asten the scre w . I A C 24 V/DC 12 V P ower Suppl y Wire DC 12 V Input: Red (+12 V ...

  • JVC TK-C215VP12 - page 15

    11 Camera (Interior) L Rotation Knob Rotate the lens unit to adjust the inclination of the image. ( A Pg. 22) M Rotation Center Mark ( A Pg. 22) N Fall Prevention Wire Use this to connect the base G to the dome cover D . O Camera Unit Fastening Screw ⳯ 2 Use this to f asten the camera unit Q to the base G . To r e m o v e ( A Pg. 17) P [MONIT OR] ...

  • JVC TK-C215VP12 - page 16

    12 Intr oduction Set the video setting switches on the camera unit before mounting it. T o set the switches, use a fine-tipped scre wdriver . A [RESET/SPO T] RESET/SPOT b utton When this button is pressed, the v alue of the white balance or phase adjusted manually is reset to the default v alue. ● When the 2 [SELECT] switch is set to WHT .BAL., t ...

  • JVC TK-C215VP12 - page 17

    13 3. [SYNC] Synchronization system selection swit ch. This switch sets the synchronizing system for the camera. INT: This is set for internal synchronization LL (Line Lock): The camera’ s ver tical synchronization is lock ed to the A C 24 V 60 Hz or 50 Hz power line frequency . Whe n switching between multiple cameras using a s witch er , select ...

  • JVC TK-C215VP12 - page 18

    14 Installation and Co nnection ● T ur n off the power of de vices to be used bef ore connecting the cables . ● Read through the “Instr uction Manual” of the devices to be used carefully bef ore connecting. Memo: ● When mounting the heater (sold separately: KA-ZH215), make sure to connect the wire to an AC 24 V po wer supply during use. ? ...

  • JVC TK-C215VP12 - page 19

    15 The maximum connection distance varies with the type of cable used. Please refer carefully to the table f or each cable during connection. * Be sure to tur n off the power of devices bef ore connecting cables. Note: ● When mounting the heater (sold separately: KA-ZH215), make sure to connect the wire to an AC 24 V po wer supply during use. Vid ...

  • JVC TK-C215VP12 - page 20

    16 Installation and Co nnection Follo w the procedures below to connect/set this unit. T ur n off the power of de vices to be used before connecting the cables . K K K K K K Procedures fr om Connection to Setting 䢇 Before touching the camera unit, make sure to touch the metal surface of the [MONIT OR] terminal to discha rge any static electricity ...

  • JVC TK-C215VP12 - page 21

    17 Remov e the dome cover , followed b y setting the video image switches. 1. Removing the dome cover Remov e the dome cover b y unf astening the 3 fastening scre ws using the wrench supplied. Memo: ● The dome cov er and base are connected with fall pre vention wire. 2. Removing the inner dome The inner dome is fastened using lugs at 3 different ...

  • JVC TK-C215VP12 - page 22

    18 Installation and Co nnection 2. Mounting the fall p revention wire to the base (fall prevention wire is not supplied) Remov e the f astening screw f or the f all prev ention wire and mount the fall pre vention wire. Note: ● P a y attention to the length, strength, routing and material (insulation proper ties) of the fall prev ention wire used. ...

  • JVC TK-C215VP12 - page 23

    19 1. Connecting the coaxial cable ( A Pg. 15) Lower the protection co ver and connect the connectors. Upon connecting, cov er the connectors using the protection cover . 2. Connecting the AC 24 V/DC 12 V power supply wires Note: ● T o mount a heater (sold separately) to this unit, make sure to connect it to an AC 24 V supply during use. 3. Bindi ...

  • JVC TK-C215VP12 - page 24

    20 Installation and Co nnection Fill the piping hole and mounting hole wit h a sealing material, mount the camera unit to the base, and inser t the silica gel. 1. Fill the hole with se aling material Fill the piping hole as well as the 2 mounting holes mounted with screws using a sealing material. Memo: ● Use GE silicon or its equivalents as the ...

  • JVC TK-C215VP12 - page 25

    21 4. Inserting the silica gel suppli ed T ake out the silica gel from the aluminum package , inser t it into the silica gel inser tion space of the camera unit and fasten using the lug plate. Memo: ● During reconnectio n or re-installation after repair or maintenance, make sure to replace the silica gel with a new one. ● Consult your nearby JV ...

  • JVC TK-C215VP12 - page 26

    22 Installation and Co nnection Upon mounting the camera, adjust the images while checking the actual image. Mounting the test monitor Connect the [MONITOR] terminal of this unit to the test monitor to adjust the camera’ s shooting direction, angle of view and f o cus. Memo: ● Before setting, ensure to turn on the power of the system. Adjusting ...

  • JVC TK-C215VP12 - page 27

    23 Adjusting the angle of view , focus and brightness Upon deter mining the imaging direction, adjust the angle of view , focus and brightness accordingly . Note: ● When adjusting the focus, make sure to cov er the dome cover o ver the lens. The dome cov er of this unit is thick. Therefore , if the focus is not adjusted with the dome co ver cov e ...

  • JVC TK-C215VP12 - page 28

    24 Installation and Co nnection After setting is complete, mount the inner dome to the camera. 1. Mounting the inn er dome Mount the inner dome to the 3 lugs. Note: ● Mount the inner dome such that it does not cov er the lens. ● When mounting the inner dome, make sure not to move the position of the lens. Doing so may cause the preset angle of ...

  • JVC TK-C215VP12 - page 29

    25 Note: ● Make sure that the dome cov er is fir mly fastened. Otherwise, the humidity lev el may rise, which may result in f ogging and ev en falling of the cov er . ● Ensure that the fall pre vention wire of the dome cover is not caught in the space between the dome cov er and base. F ailing to do so may cause the dust-proof and w ater- proof ...

  • JVC TK-C215VP12 - page 30

    26 Installation and Co nnection Use the piping hole to mount the camera. Mounting the camera usin g the piping hole at the bottom surface of the base 1. Setting the switches ( A Pg. 17) 2. Removing the camera unit from the base. ( A Pg. 17 , step 1) 3. Mount the fall prevention wire to the base ( A Pg. 18) 4. Binding the sealing tape Bind at least ...

  • JVC TK-C215VP12 - page 31

    27 Mounting the camera usin g the piping hole at the side surface of the base If the camera cannot be mounted directly to the ceiling, mount it to the pipe using the piping hole at the side surface of the base. 1. Setting the switches ( A Pg. 17) 2. Dismantle the camera unit from the base and mount the fall prevention wire ( A Pg. 17)( A Pg. 18) 3. ...

  • JVC TK-C215VP12 - page 32

    28 Installation and Co nnection As a general characteristic unique to CCDs, white-spots may appear on the screen with age. In order to reduce this phenomenon, this unit is equipped with a white-spot correction feature. Switch on the camera pow er supply and wait f o r at least 30 minutes. 1. Remove the dome cover . 2. Cover the lens surfac e using ...

  • JVC TK-C215VP12 - page 33

    29 Other s 䡵 Camera Signal system: U type : Based on NTSC standard E type : Based on P AL standard Scanning frequencies U type : 15.734 kHz (Horizontal), 59.94 Hz (V er tical) E type : 15.625 kHz (Horizontal), 50 Hz (V er tical) Image device: 1/4" IT CCD Effective picture elements: U type : 380,000 pixels , 768 (H) x 494 (V) E type : 440,000 ...

  • JVC TK-C215VP12 - page 34

    30 Other s 䡵 General P ower supply : AC 24 V H 50 Hz/60 Hz DC 12 V P ower consumption U type : 4.2 W : 23 W (When using KA- ZH215) E type : 340 mA : 1 A(When using KA-ZH215) Ambient temperature : - 10 I to 50 I (14 g to 122 g ) (Operation) :0 I to 40 I (32 g to 104 g ) (Recommended) When using KA-ZH215 : - 30 I to 50 I ( - 22 g to 122 g ) (Operat ...

  • JVC TK-C215VP12 - page 35

    31 F ocus char t TK-C215VP4_JP.book Page 31 Wednesda y, September 20, 2006 5:48 PM ...

  • JVC TK-C215VP12 - page 36

    © 2006 Victor Company of J apan, Limited LST0509-001A TK-C215VP4 DOME CAMERA TK-C215VP4_JP.book Page 32 Wednesda y, September 20, 2006 5:48 PM ...

Manufacturer JVC Category Security Camera

Documents that we receive from a manufacturer of a JVC TK-C215VP12 can be divided into several groups. They are, among others:
- JVC technical drawings
- TK-C215VP12 manuals
- JVC product data sheets
- information booklets
- or energy labels JVC TK-C215VP12
All of them are important, but the most important information from the point of view of use of the device are in the user manual JVC TK-C215VP12.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals JVC TK-C215VP12, service manual, brief instructions and user manuals JVC TK-C215VP12. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product JVC TK-C215VP12.

Similar manuals

A complete manual for the device JVC TK-C215VP12, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use JVC TK-C215VP12 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of JVC TK-C215VP12.

A complete JVC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual JVC TK-C215VP12 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the JVC TK-C215VP12, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the JVC TK-C215VP12, that we can find in the current document
3. Tips how to use the basic functions of the device JVC TK-C215VP12 - which should help us in our first steps of using JVC TK-C215VP12
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with JVC TK-C215VP12
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of JVC TK-C215VP12 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning JVC TK-C215VP12?

Use the form below

If you did not solve your problem by using a manual JVC TK-C215VP12, ask a question using the form below. If a user had a similar problem with JVC TK-C215VP12 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)