English dropdown-ico

Manual Supermicro SuperChassis 213LT-600LPB

70 pages Not applicable
Download

Go to site of 70

Summary
  • Supermicro SuperChassis 213LT-600LPB - page 1

    SC213 Chassis Series SC213A-R900UB SC213A-R900LPB SC213A-R720UB SC213A-R720LPB USER’S MANUAL 1.0a S UPER ® ...

  • Supermicro SuperChassis 213LT-600LPB - page 2

    SC213 Chassis Manual ii Manual Revision 1.0a Release Date: August 7, 2009 The informati on in this User ’s Manual has been carefu lly reviewed and is bel ieved to be accurate. The vendor assumes no respons ibility for any in accuracies that may be contained in this document, makes no commitment to upda te o r t o ke ep current the information in ...

  • Supermicro SuperChassis 213LT-600LPB - page 3

    iii Preface Preface This manu al is writt en fo r prof essional system integrators and PC techni cians. It provides i nformation for the install ation and use o f the SC213 ch assis. Installati on and mainten ance should be per formed by experienc ed technicians onl y . Supermicro’s SC213 chass is features a un ique design , which is highly opti ...

  • Supermicro SuperChassis 213LT-600LPB - page 4

    SC213 Chassis Manual iv Manual Organization Chapter 1 Introduction The introdu ction provides a lis t of the main compo nents included with this chassis and describes the primary features of the SC213 chassis. This chapter also includes contact information. Chapter 2 System Safety Chapter 2 lists warnings, precaution s, an d sy stem safety . Y ou s ...

  • Supermicro SuperChassis 213LT-600LPB - page 5

    v Preface Append ix C This section provides detailed information on the SAS-213A backplane. Additional information can by found on our Web site, at www .supermicro.com ...

  • Supermicro SuperChassis 213LT-600LPB - page 6

    SC213 Chassis Manual vi T able of Contents Chapter 1 Introductio n 1-1 Overview ......................................................................................................... 1- 1 1-2 Shipping List .................................................................................................... 1- 1 1-3 Contacting Supermicro ......... ...

  • Supermicro SuperChassis 213LT-600LPB - page 7

    vii Preface Installation Complete ..................................................................................... 4-1 5 4-1 1 System Fans ................................................................................................. 4-1 6 4-12 Power Supply .................................................................................... ...

  • Supermicro SuperChassis 213LT-600LPB - page 8

    SC213 Chassis Manual viii Notes ...

  • Supermicro SuperChassis 213LT-600LPB - page 9

    Chapter 1 Introduction 1-1 Overview Supermicro’s SC213 chassis provides 16 hot-swappable 2.5” SAS/SA T A hard drive bays, one 5.25” hard drive, one slim DVD and one slim oppy drive in an efcient 2U form factor , designed for the most frequently encountered applications. The chassi s is also equip ped w ith a redun dant 720W Gold L evel ...

  • Supermicro SuperChassis 213LT-600LPB - page 10

    SC213 Chassis Manual 1-2 1-3 Contacting Supermicro Headquarters Address: Super Micro Computer , Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. T el: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (T echnical Support) Web Site: www .supermicro.com Europe Address: Super Micro Comput ...

  • Supermicro SuperChassis 213LT-600LPB - page 11

    1-3 Chapter 1: Introduction 1-4 Returning Merchandise for Service A receipt or copy of your invoice marked with the date of purchase is required be - fore a ny warranty service will be rendered. Y ou can obtain service by ca lling your vendor for a Returned Mer chandise A uthorization (RMA) number. When returni ng to the manufacturer , the RMA numb ...

  • Supermicro SuperChassis 213LT-600LPB - page 12

    SC213 Chassis Manual 1-4 Notes ...

  • Supermicro SuperChassis 213LT-600LPB - page 13

    2-1 Chapter 2: System Safety Chapter 2 System Safety 2-1 Overview This chapter provides a quick setup checkli st to get your chassis up and running. Following the steps in the order provided should enable you to have your chassis setup and operational within a minimal amount of time. This quick set up assumes that you are an experienced technician, ...

  • Supermicro SuperChassis 213LT-600LPB - page 14

    SC213 Chassis Manual 2-2 2-4 Electrical Safety Precautions Basic electr ical safety precaut ions should be follow ed to protect yourse lf from harm and the SC213 from damage: Be aware of the locations of the p ower on/off switch on th e cha ssis as well • as t he room’s emergency power-off switch, disconnec tion switch or electrical outlet. ...

  • Supermicro SuperChassis 213LT-600LPB - page 15

    2-3 Chapter 2: System Safety DVD-R OM l aser: CAUTI ON - this server may have come equipped with a • DVD-ROM d rive. T o pr event direct exposure t o the laser beam and hazardous radiation exposure, do not open the enclosure or use the unit in any uncon - ventional way . 2-5 General Safety Precautions Keep the area around the chassis clean and ...

  • Supermicro SuperChassis 213LT-600LPB - page 16

    SC213 Chassis Manual 2-4 T o uch a grounded metal obje ct bef ore re moving any boa rd fr om its antis tatic • bag. Do not let components or PCBs come into contact with your clothing, which may • retain a charge even if you are wearing a wrist strap. Handle a board by it s edges only; do not touch its components, peripheral chips, • ...

  • Supermicro SuperChassis 213LT-600LPB - page 17

    3-1 Chapter 3: System Interface Chapter 3 System Interface 3-1 Overview There are s everal LEDs on the c ontrol panel as well as o ther LEDs on t he drive carriers to k eep you constantly informed of the ove r-all status of the sys tem, as well as the activ ity an d hea lth of spec ic co mponents. Most SC21 3 mod els ar e two buttons on the cont ...

  • Supermicro SuperChassis 213LT-600LPB - page 18

    SC213 Chassis Manual 3-2 Powe r: • Ind icat es powe r is bei ng sup plie d to the sys tem's po wer sup ply uni ts. Thi s LED shou ld nor mally b e illum inated w hen the sy stem is op erati ng. HD D: • In di cat es ID E ch an ne l a cti vi ty . SA S/ SA T A d riv e an d/ or D VD-ROM dri v e activit y w hen ashing. 3-3 Control Pane ...

  • Supermicro SuperChassis 213LT-600LPB - page 19

    3-3 Chapter 3: System Interface Power Failure: • When this LE D ashes, it indicat es a power failure in the power supply . N I C 1: • Ind icate s net work ac tiv ity o n GL AN1 whe n ashin g. NI C2: • Ind icate s net work ac tiv ity o n GL AN 2 when  ashing . Overheat /F an Fai l: • Wh en thi s L ED  ash es it in dic ...

  • Supermicro SuperChassis 213LT-600LPB - page 20

    SC213 Chassis Manual 3-4 3-4 Drive Carrier LEDs Y our cha ssis uses SAS or SA T A, but not both at the same time. SAS/SA T A Drives Each SAS/SA T A drive carrier has two LEDs. Green or Blue: • E ach hard dis k dr ive c ar rie r ha s ei ther a g reen or a bl ue LE D, dep endi ng u pon the har d dis k dr ives an d bac kpl ane use d. W hen i llum ...

  • Supermicro SuperChassis 213LT-600LPB - page 21

    4-1 Chapter 4: Chassis Setup and Maintenance Chapter 4 Chassis Setup and Maintenance 4-1 Overview This chapter covers the steps required to install components and perform mainte - nance on th e SC213 chassis. The onl y tool you will nee d to install compo nents and perform maint enance is a Phillips screw driver , and under certain cir cumstances, ...

  • Supermicro SuperChassis 213LT-600LPB - page 22

    SC213 Chassis Manual 4-2 4-3 Removing the Chassis Cover Removing the Chassis Cover the Chassis Cover Press both release tabs at the same time to release the cover from the locked 1. position. Once the to p cover has been r eleased, slide the cover backwa rds, toward the 2. rear of the chassis. Lift the cover up and off the chassis. 3. W arning: Exc ...

  • Supermicro SuperChassis 213LT-600LPB - page 23

    4-3 Chapter 4: Chassis Setup and Maintenance 7 4-4 Installing Hard Drives The SC213 comes equipped with sixtee n hot -swappable hard drives. Only SAS or enterprise SA T A HDDs are recommended for use in the SC213 chassis. Removing Hard Drive Trays from the Chassis Press the release button on the drive carrier . This extends the drive carrier 1. han ...

  • Supermicro SuperChassis 213LT-600LPB - page 24

    SC213 Chassis Manual 4-4 Figure 4-3: Chassis Drive T ray Figure 4-4: Proper Installation of the Hard Drive into the Hard Drive Bay Installing a Hard Drive into a Drive Carrier Insert a drive into the carrier with the PCB side facing down and the connec - 1. tor end toward the rear of the carrier . Align the d rive in the carrie r so that the mount ...

  • Supermicro SuperChassis 213LT-600LPB - page 25

    4-5 Chapter 4: Chassis Setup and Maintenance I/O Shield The I/O shield holds the motherboar d ports in place. Install the I/O shie ld before installing the mother board. If the mother board you purch ased did not include a standard I/ O shield, contact the motherboa rd vendor for a co mpatible shield. Installing the I/O Shield Review the documentat ...

  • Supermicro SuperChassis 213LT-600LPB - page 26

    SC213 Chassis Manual 4-6 Figure 4-6: Chassis Standoffs Permanent and Optional Standoffs Standoffs prevent short circuits by creating space between the motherboa rd and the chassis surface. The SC213 chass is includes perman ent standoffs in locatio ns used by most motherboards. These standoffs accept the rounded Phillips head screws which are inclu ...

  • Supermicro SuperChassis 213LT-600LPB - page 27

    4-7 Chapter 4: Chassis Setup and Maintenance 4-7 Installing the Motherboard Installing the Motherboard Review the documentatio n that came with yo ur motherboard. Be come familiar 1. with component placement, requirements, precautions, and cable connec - tions. Open the chassis cover . 2. If necessary , remove the air shroud and riser card bracket. ...

  • Supermicro SuperChassis 213LT-600LPB - page 28

    SC213 Chassis Manual 4-8 Figure 4-8: Installing the UIO Motherboard Secure the CPU(s), heat sinks, and other co mponents to the mo therboard as 8. described in the motherboard documentation. Connect the cables between th e motherboard, back plane, chassis, fr ont 9. panel, and power supply , as needed. Additionally , the fans may be temporar - ily ...

  • Supermicro SuperChassis 213LT-600LPB - page 29

    4-9 Chapter 4: Chassis Setup and Maintenance 4-8 Installing the Add-on Cards Add-on card installation in the SC213 chassis differs between the UIO and low- prole chassi s models. See below for di rections that are speci c you your chassis type. InstallingAdd-on Cards in Low-Prole Model Chassis Installing Add-on Card Brack ...

  • Supermicro SuperChassis 213LT-600LPB - page 30

    SC213 Chassis Manual 4-10 Figure 4-1 1: Installing the UIO Riser Card Bracket Installing Riser Cards and Add-on Cards in UIO Models Installing the Riser Card - UIO Chassis Models Remove the chassis cover . 1. Remove the riser bracket. 2. Install the riser card onto t he riser bracket. N ote that there are different cards 3. for the rig ht and left ...

  • Supermicro SuperChassis 213LT-600LPB - page 31

    4-1 1 Chapter 4: Chassis Setup and Maintenance Figure 4-12: UIO Add-on Card Installed Installing the Add-on Cards in UIO Chassis Models Ensure that the riser card an d riser card bracke t have been correc tly installed 1. in the chassis. Remove the blank bracket from the rear slot in the chassis. 2. Slide the add-on card horizontally into the slot ...

  • Supermicro SuperChassis 213LT-600LPB - page 32

    SC213 Chassis Manual 4-12 4-9 Installing the Air Shroud Air shro uds concentrate airow to maximize fan efc iency . The SC213 ch assis air shroud does not require screws for installation. Installing the Air Shroud in the Chassis Installing the Air Shroud Lay the chassis on a at, stable surface and remove the chassis cover . 1. Ensure that t ...

  • Supermicro SuperChassis 213LT-600LPB - page 33

    4-13 Chapter 4: Chassis Setup and Maintenance Figure 4-14: UIO Air Shroud Installation An additiona l a ir shroud is required for high-powered CPUs, to provide extra cooling. Install the additional air sh roud if necessary . Installing the Additional Air Shroud Installing the Additional Air Shroud in the Chassis Remove the left side break-away piec ...

  • Supermicro SuperChassis 213LT-600LPB - page 34

    SC213 Chassis Manual 4-14 4-10 Checking the Air Flow Checking the Server's Air Flow Make sure t here are no object s to obstruct airo w in and out of th e server . In 1. addition, i f you are using a front bezel, make sure th e bezel's lter is replaced periodically . Do not oper ate the server wit hout drives or driv e trays in the ...

  • Supermicro SuperChassis 213LT-600LPB - page 35

    4-15 Chapter 4: Chassis Setup and Maintenance Installation Complete In most cases, the chassis power supp ly a nd fa ns a re p re-installed. If you need to install fans continue to the Systems Fan section of this chapter . If the chassis will be installed into a rack, continue to the next chapter for rack installation instructions. ...

  • Supermicro SuperChassis 213LT-600LPB - page 36

    SC213 Chassis Manual 4-16 Three heavy duty fans p rovide cooli ng for the c hassis. These fans circulate air through the chassis as a means of lowering the chassis internal temperature. The SC213 fans are hot-swappable, enabling the fans to be re placed without powering -down the system. 4-1 1 System Fans Figure 4-15: System Fan Release T ab Replac ...

  • Supermicro SuperChassis 213LT-600LPB - page 37

    4-17 Chapter 4: Chassis Setup and Maintenance Figure 4-16: Placing the Low Prole System Fan Figure 4-17: Placing the UIO System Fan ...

  • Supermicro SuperChassis 213LT-600LPB - page 38

    SC213 Chassis Manual 4-18 The SC213 chassis has two redundant 720 or 900 W att power supplies. The power modules are ho t-swappable, enabling the pow er supplies to b e changed without powering dow n the system. These power sup plies are auto-switch ing capable. This enables the power supply to automatically sense and operate at a 100v to 240v inpu ...

  • Supermicro SuperChassis 213LT-600LPB - page 39

    4-19 Chapter 4: Chassis Setup and Maintenance 4-13 Installing the Power Distributor The power distributor provides failover and power supply redundancy and is pre-install ed in the chassis. In t he rare eve nt that you have to rep lace the po wer distributor, follow the steps below . Changing the Power Distributor Power down the server and unplug t ...

  • Supermicro SuperChassis 213LT-600LPB - page 40

    SC213 Chassis Manual 4-20 Figure 4-20: Removing the Screws at the T op of the Backplane 4-14 Removing the Backplane The SC213 chassis backplane is loc ated beh ind the hard drives and in fron t of the front syst em fans. In ord er to change ju mper settings o n the backplane, it may be necessary to remove the backplane from the chassis. Removing th ...

  • Supermicro SuperChassis 213LT-600LPB - page 41

    4-21 Chapter 4: Chassis Setup and Maintenance Loosen but do not remov e the three screws in the sprin g bar , located on th e 6. oor of the chassis, indicated by the arrows below . Gently ease the backplane up and out of the chassis. 7. 6 Figure 4-21: Loosening the Spring Bar Screws in the Floor of the Chassis ...

  • Supermicro SuperChassis 213LT-600LPB - page 42

    SC213 Chassis Manual 4-22 1 4-15 Installing the Backplane Installing the Backplane into the Chassis Ensure that all of the hard drive trays have been removed from the bays in 1. the front o f the chassis and that the spri ng bar has been lo osened as directed in the previous section. Slide the backplane into the chassis at a slight angle, pushing i ...

  • Supermicro SuperChassis 213LT-600LPB - page 43

    5-1 Chapter 5: Rack Installation Chapter 5 Rack Installation 5-1 Overview This chapter provides a quick setup checkli st to get your chassis up and running. Following these steps in the order given should enable you to have the system operational within a minimal amount of time. 5-2 Unpacking the System Y ou sh ould inspect the box which the chas s ...

  • Supermicro SuperChassis 213LT-600LPB - page 44

    SC213 Chassis Manual 5-2 5-4 W arnings and Precautions Rack Precautions Ensure that t he leveling jacks on t he bottom of the rack are f ully extended to • the oor with the full weight of the rack resting on them. In single rack installations, stabilizers should be attached to the rack. • In multiple rack installations, the racks shoul ...

  • Supermicro SuperChassis 213LT-600LPB - page 45

    5-3 Chapter 5: Rack Installation Always keep the rack's front door and all panels and component s on the servers • closed when not servicing to maintain prop er cooling. 5-5 Rack Mounting Considerations Ambient Operating T emperature If installed in a closed or multi-unit rack assembly , the ambient operating tempera - ture of the rack en ...

  • Supermicro SuperChassis 213LT-600LPB - page 46

    SC213 Chassis Manual 5-4 5-6 Rack Mounting Instructions This sectio n provides informat ion on installing th e chassis into a ra ck unit with the rails provid ed. There are a var iety of ra ck units o n the mark et, which may mean that the assemb ly proce dure wil l differ slightl y from the instruc tions pr ovided. Y ou should al so refer to the i ...

  • Supermicro SuperChassis 213LT-600LPB - page 47

    5-5 Chapter 5: Rack Installation Figure 5-2: Extending and Releasing the Inner Rail 1 2 1 1 1 3 1 4 Locking T abs Each inner rail has a locking tab. This tab locks the chassis into place when installed and p ushed fully into th e rack. Thes e tabs also lock the chas sis in place when fully extended from the rack. This pr events the se rver f rom c ...

  • Supermicro SuperChassis 213LT-600LPB - page 48

    SC213 Chassis Manual 5-6 Figure 5-4: Inner Rails Installed on the Chassis (The chassis above are an example only . Actual chassis may differ slightly) Figure 5-3: Installing the Inner Rails Installing The Inner Rails on the Chassis Installing the Inner Rails Conrm that the left and right inner rails have been correctly identied. 1. Place the ...

  • Supermicro SuperChassis 213LT-600LPB - page 49

    5-7 Chapter 5: Rack Installation Installing the Outer Rails on the Rack Installing the Outer Rails Press upwar d on the locking t ab at the rear end of the middl e rail. 1. Push the middle rail back into the outer rail. 2. Hang the hooks of the front of the outer rail onto the slots on the front of 3. the rack. I f necessary , use screws to secure ...

  • Supermicro SuperChassis 213LT-600LPB - page 50

    SC213 Chassis Manual 5-8 Figure 5-6: Installing into a Rack Standard Chassis Installation Installing the Chassis into a Rack Conrm that the inner rails are properly installed on the chassis. 1. Conrm that the outer rails a re correctly instal led on the rack. 2. Pull the middle rail out from the front of the outer rail and make sure that the ...

  • Supermicro SuperChassis 213LT-600LPB - page 51

    5-9 Chapter 5: Rack Installation Optional Quick Installation Method The follo wing quick inst allation method may be used to install the chas sis o nto a rack. Installing the Chassis into a Rack Install the whole rail assembly onto the rack as described on page 5-7. 1. Release the inner rail withou t retracting the mi ddle rail. 2. Install the inne ...

  • Supermicro SuperChassis 213LT-600LPB - page 52

    SC213 Chassis Manual 5-10 Notes ...

  • Supermicro SuperChassis 213LT-600LPB - page 53

    A-1 Appendix A: Chassis Cables Appendix A SC213 Chassis Cables A-1 Overview This appendix list s support ed cables for your chassi s system. It only include s the most commonly used comp onents and congurations. For more compa tible cables, refer t o the manu facturer of the m otherboard you a re using a nd our Web si te at: www .supermicro.com. ...

  • Supermicro SuperChassis 213LT-600LPB - page 54

    SC213 Chassis Manual A-2 A-3 Compatible Cables These cables are compatible with the SC213 Chassis. Description: This c able ha s one SF F-8484 (32 pin) connec tor on one end and 4 SAS connect ors (7 pins each) at t he other. Th is cable c onnects f rom the Ho st (motherboard or other controller) to the backplane SAS hard drive port. Cable Name: SAS ...

  • Supermicro SuperChassis 213LT-600LPB - page 55

    A-3 Appendix A: Chassis Cables Extending Power Cables Although Supermicro chassis are designed to be efcient and cost-effective, some compatible motherboards have power connectors located in different areas. T o use these motherboards you may have to extend the power cables to the moth - erboards. T o do this, use the following chart as a guide. ...

  • Supermicro SuperChassis 213LT-600LPB - page 56

    SC213 Chassis Manual A-4 Notes ...

  • Supermicro SuperChassis 213LT-600LPB - page 57

    B-1 Appendix B: Power Supply Specications Appendix B SC213PowerSupplySpecications This appendix lists power supply specications for your chassis system. SC213A-R900UB, SC213A-R900LPB 900W MFR Part # PWS-902-1R with PDB Rated AC V oltage 100 - 240V 60 - 50Hz 1 1 - 4.5 Amp +5V standby 4 Amp +12V 75 Amp +5V 45 Amp +3.3V 24Amp -12V 0. ...

  • Supermicro SuperChassis 213LT-600LPB - page 58

    SC213 Chassis Manual B-2 Notes ...

  • Supermicro SuperChassis 213LT-600LPB - page 59

    C-1 Appendix C: SAS-213A Backplane Specications Appendix C SAS-213A BackplaneSpecications T o avoid personal injury and property damage, carefully follow all the safety steps listed below when accessing your system or handling the components. C-1 ESD Safety Guidelines Electrostatic Discharge (ESD) can damage electronic com ponents. T ...

  • Supermicro SuperChassis 213LT-600LPB - page 60

    C-2 SC213 Chassis Manual C-3 A Note to Users All images and layouts shown in this user's guide are based upon the latest PCB • Revision av ailable at the time of publishing. The card yo u have received may or may not look exactly the same as the graphics shown in this manual. C-4 Introduction to the SAS-213A Backplane The SAS-213A backpla ...

  • Supermicro SuperChassis 213LT-600LPB - page 61

    C-3 Appendix C: SAS-213A Backplane Specications JumperSettingsandPinDenitions C-5 Front Connectors and Jumpers Front Connectors Y2 C6 C5 C47 C44 C201 C197 JP78 JP69 JP13 JP10 JP46 JP48 JP37 JP52 JP95 JP96 JP35 JP36 JP84 R132 R131 R125 R123 R392 R169 R351 R365 R124 R126 R302 R303 R624 JP18 JP80 F3 C213 C212 C133 C132 C139 C380 C130 ...

  • Supermicro SuperChassis 213LT-600LPB - page 62

    C-4 SC213 Chassis Manual C-6 Front Connector and Pin Denitions 1. Upgrade Connectors The upgrad e connectors are designated JP69, and JP78 are used for manufacturer's diagnos - tic purposes only . 2. - 5. I 2 C Connectors The I 2 C Connectors, desig nated JP37 , JP95, JP52 and JP96 are used to monitor HDD ac - tivity and stat ...

  • Supermicro SuperChassis 213LT-600LPB - page 63

    C-5 Appendix C: SAS-213A Backplane Specications 1 1. - 12. ACT_IN: The activity LED connectors , designated JP26, an d JP2 7 are u se d to ind ic ate th e act ivi ty stat us o f e ach SAS drive. The activit y LE D connector is located on the front panel. For the activity LED connector to work properly , connect using a 10-pin LED cable. This is ...

  • Supermicro SuperChassis 213LT-600LPB - page 64

    C-6 SC213 Chassis Manual 13. JP80 I 2 C Addr On C0, Off C2 (Not populated) 14. Chip Reset JP36 1-2 Reset, 2-3 No Reset (Not populated) 15. Buzzer Reset* JP18 16. JP84 1-2 SGPIO, 2-3 I 2 C 17. Chip Reset JP35 1-2 Reset, 2-3 No Reset (Not populated) C-7 Front Jumper  Locations and Pin Denitions Y2 C6 C5 C47 C44 C201 C197 JP78 JP69 JP13 ...

  • Supermicro SuperChassis 213LT-600LPB - page 65

    C-7 Appendix C: SAS-213A Backplane Specications I 2 C and SGPIO Modes and Jumper Settings This backplane can utilize I 2 C or SGP IO. S GPIO is the de fault mode and can be used without making changes to your jumper . The following information details which jumper must be congured to use SGPIO mode or restore your backplane to I 2 C mode. SGP ...

  • Supermicro SuperChassis 213LT-600LPB - page 66

    C-8 SC213 Chassis Manual Y2 C6 C5 C47 C44 C201 C197 JP78 JP69 JP13 JP10 JP46 JP48 JP37 JP52 JP95 JP96 JP35 JP36 JP84 R132 R131 R125 R123 R392 R169 R351 R365 R124 R126 R302 R303 R624 JP18 JP80 F3 C213 C212 C133 C132 C139 C380 C130 C35 JSM1 JP26 JP27 JSM2 JSM3 JSM4 MH2 MH1 MH3 + + + + + + + 6 5 2 1 6 5 2 1 4 1 4 1 4 1 4 1 3 1 3 1 3 1 1 1 + + A1 B1 A1 ...

  • Supermicro SuperChassis 213LT-600LPB - page 67

    C-9 Appendix C: SAS-213A Backplane Specications RP3 RP6 R301 R90 R89 R87 R86 R83 R468 R467 R466 R465 R464 R461 R460 R435 R428 R253 R251 R250 R215 R214 R213 R180 R179 R178 R175 R174 R173 R165 R164 R85 R84 R463 R614 F13 F14 F15 F16 D87 D42 D41 D40 D26 D25 D24 D22 D15 D14 D13 D12 D111 D106 D104 D102 D88 D8 D7 D6 D5 D39 D38 D37 D31 D30 D29 D23 D110 ...

  • Supermicro SuperChassis 213LT-600LPB - page 68

    C-10 SC213 Chassis Manual Rear LED Indicators Rear LED Hard Drive Activity Failure LED SAS #0 D12 D5 SAS #1 D22 D23 SAS #2 D40 D37 SAS #3 D102 D107 SAS #4 D13 D6 SAS #5 D24 D29 SAS #6 D41 D38 SAS #7 D104 D108 SAS #8 D14 D7 SAS #9 D25 D30 SAS #10 D42 D39 SAS #1 1 D106 D109 SAS #12 D15 D8 SAS #13 D26 D31 SAS #14 D87 D88 SAS #15 D1 1 1 D1 10 ...

  • Supermicro SuperChassis 213LT-600LPB - page 69

    C-1 1 Appendix C: SAS-213A Backplane Specications Notes ...

  • Supermicro SuperChassis 213LT-600LPB - page 70

    C-12 SC213 Chassis Manual Disclaimer (cont.) The products sold by Supermicro are not intended for and will not be used in life sup- port systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to per- form be reasonably expected to result ...

Manufacturer Supermicro Category Computer case

Documents that we receive from a manufacturer of a Supermicro SuperChassis 213LT-600LPB can be divided into several groups. They are, among others:
- Supermicro technical drawings
- SuperChassis 213LT-600LPB manuals
- Supermicro product data sheets
- information booklets
- or energy labels Supermicro SuperChassis 213LT-600LPB
All of them are important, but the most important information from the point of view of use of the device are in the user manual Supermicro SuperChassis 213LT-600LPB.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Supermicro SuperChassis 213LT-600LPB, service manual, brief instructions and user manuals Supermicro SuperChassis 213LT-600LPB. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Supermicro SuperChassis 213LT-600LPB.

Similar manuals

A complete manual for the device Supermicro SuperChassis 213LT-600LPB, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Supermicro SuperChassis 213LT-600LPB by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Supermicro SuperChassis 213LT-600LPB.

A complete Supermicro manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Supermicro SuperChassis 213LT-600LPB - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Supermicro SuperChassis 213LT-600LPB, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Supermicro SuperChassis 213LT-600LPB, that we can find in the current document
3. Tips how to use the basic functions of the device Supermicro SuperChassis 213LT-600LPB - which should help us in our first steps of using Supermicro SuperChassis 213LT-600LPB
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Supermicro SuperChassis 213LT-600LPB
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Supermicro SuperChassis 213LT-600LPB in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Supermicro SuperChassis 213LT-600LPB?

Use the form below

If you did not solve your problem by using a manual Supermicro SuperChassis 213LT-600LPB, ask a question using the form below. If a user had a similar problem with Supermicro SuperChassis 213LT-600LPB it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)