English dropdown-ico

Manual ClearOne comm PSR1212

145 pages 9.94 mb
Download

Go to site of 145

Summary
  • ClearOne comm PSR1212 - page 1

    PSR1212 Digital Matrix Mix er Installation & Operation Manual ...

  • ClearOne comm PSR1212 - page 2

    ii T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 ©2002 ClearOne Communications, Inc. All rights reser ved. No part of this document may be reproduced in any form or by any means without written permission from ClearOne Communications, Inc. Printed in the United States of America. ClearOne Communications, Inc. reser ves specific ...

  • ClearOne comm PSR1212 - page 3

    iii T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 PSR1212 Installation and Operation Manual T able of Contents CHAPTER 1: Introduction . . . . . . . . . . . . . . . . . . . . . .1 Product over view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 N e w F e a t u r e s . . . . . . . . . ...

  • ClearOne comm PSR1212 - page 4

    iv T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 CHAPTER 3: System Configuration . . . . . . . . . . . . . . . .21 G-W are R equirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 C r e a t i n g F l o p p y D i s k C o p i e s . . . . . . . . . . . . . . . . . . . . . . . ...

  • ClearOne comm PSR1212 - page 5

    v T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 CHAPTER 5: Operation . . . . . . . . . . . . . . . . . . . . . . . .65 Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Signal Generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • ClearOne comm PSR1212 - page 6

    vi T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 ...

  • ClearOne comm PSR1212 - page 7

    T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Congratulations on purchasing the PSR1212, a highly advanced twelve-by-twelve digital matrix mixer with audio processing. It utilizes an inter nal macro language and 32 user -definable presets to quickly adapt to a variety of sound reinforcement and room-combining applications in aud ...

  • ClearOne comm PSR1212 - page 8

    Introduction ~ New F eatures 2 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 New F eatures • Virtual references. The PSR1212 now features four user -definable virtual references. These references can use multiple signals as the P A Adapt reference point without sacrificing an analog output. • Front panel gain and mute contro ...

  • ClearOne comm PSR1212 - page 9

    3 Introduction ~ Professional Services Group T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Professional Ser vices Group If you need any additional information on how to install, set up, or operate your system, please contact us at one of the locations listed below. We welcome and encourage your comments so we can continue to imp ...

  • ClearOne comm PSR1212 - page 10

    Ensure that the following items were received with your shipment: Introduction ~ Unpacking 4 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 ClearOne is not responsible for product damage incurred during shipment. Y ou must make claims directly with the carrier. Inspect your shipment carefully for obvious signs of damage. If the s ...

  • ClearOne comm PSR1212 - page 11

    5 Introduction ~ Controls and Connections T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 C. s / t These buttons scroll up and down through vertical programming options within a specific PSR1212 programming parameter or increases/decreases a numeric value. D. Esc. This button steps you out of a selected parameter or moves you up o ...

  • ClearOne comm PSR1212 - page 12

    Introduction ~ Controls and Connections P ower is supplied through the RS-485 ports to the remote Control Panels from the PSR1212. This power is limited to a total of 300mA at 15 volts for each connector. Over-current protection is provided on the +15V pins to prevent damage in the event of shorting. Exter nal power can be provided to control devic ...

  • ClearOne comm PSR1212 - page 13

    7 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Introduction ~ Networking Networking The latency or propagation delay is <1ms. - Expansion bus The digital mix-minus expansion bus (RJ-45 L AN) is used to connect up to eight PSR1212s (or XAP 800/400s and 16 XAP TH2 units), where the total number of microphone inputs does not ex ...

  • ClearOne comm PSR1212 - page 14

    Introduction ~ Operational R equirements 8 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 P ower The PSR1212 automatically accommodates voltage requirements of 100–240V AC, 50/60Hz, 15W. Equipment placement The PSR1212 units are designed for installation in a standard 19-inch equipment rack. Y ou can also purchase side panels f ...

  • ClearOne comm PSR1212 - page 15

    T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 The PSR1212 is designed for easy installation and setup. All connections are made through rear -panel connectors. This chapter provides instr uctions on making hardware connections, creating an expansion bus network, assigning device ID numbers, selecting the mixer mode, and using th ...

  • ClearOne comm PSR1212 - page 16

    Installation ~ Hardware Setup 10 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 T o connect the unit 1. Place the unit in a standard 19-inch rack and attach it securely. 2. If you are using a custom controller for control and status, plug it into the DB-25 Control/Status A or B port [D]. If you are using an external RS-232 contro ...

  • ClearOne comm PSR1212 - page 17

    11 Installation ~ Networking Units T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Expansion bus connections Using the Expansion Bus ports (RJ-45), you can connect up to eight PSR1212s or XAP 800/400s and 16 XAP TH2 units, where the total number of microphone inputs does not exceed 64. Make co nn ections between units in daisy-cha ...

  • ClearOne comm PSR1212 - page 18

    Installation ~ Networking Units 12 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Device IDs Once your expansion bus connections are made (and if you have more than one PSR1212 at a site), you need to set up a unique expansion bus device ID number— a network address— for each PSR1212 on the network. As shipped from the factor ...

  • ClearOne comm PSR1212 - page 19

    13 Installation ~ LCD Programming T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 The PSR1212’s front panel is intuitive to operate, thanks to its simple inter face: a 2x16 character LCD, menu buttons, and a peak-level LED bar meter. Although most of the PSR1212’s features are programmed with G-W are sof tware (see page 23), t ...

  • ClearOne comm PSR1212 - page 20

    Installation ~ LCD Programming 14 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 The five main menus are: System, RS-232, Meter , Inputs, and Outputs. All submenu items are arranged under these menus. Use the Enter button to select items and the s and t buttons to scroll through menus and submenus. When the last menu item is reac ...

  • ClearOne comm PSR1212 - page 21

    15 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Installation ~ LCD Programming Menu items can still be scrolled through when the panel is locked. However , settings cannot be entered until the panel is unlocked with the appropriate passcode. - T o unlock the front panel, attempt to adjust a parameter. The PSR1212 will prompt fo ...

  • ClearOne comm PSR1212 - page 22

    Installation ~ LCD Programming 16 ClearOne recommends that you leave Flow Control enabled. - The modem initialization string can be set only via the MINIT serial command (see page 113 or the G-W are software). It cannot be set through the front panel LCD. - Y ou can set the modem password using the MP ASS serial command (see page 114) or in G-W are ...

  • ClearOne comm PSR1212 - page 23

    17 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Installation ~ LCD Programming Inputs Select which input (1–12) you want to monitor on the LCD and LED display. Scroll to the input, then press Enter. The meter displayed is the post-gain meter. Outputs This submenu allows you to choose which output (1–12) you want to monitor ...

  • ClearOne comm PSR1212 - page 24

    Installation ~ LCD Programming 18 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Outputs menu There are two submenus under the Outputs menu: Mute and Gain. T o access these submenus you must first select the output. Choose from Outputs 1–12. Use the s and t buttons to select the Outputs menu, then scroll through the options and ...

  • ClearOne comm PSR1212 - page 25

    19 Installation ~ LCD Programming T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Fine Input Gain Phantom Powe r On/Off Mic 55, 25 Line Fine Input Gain Fine Input Gain Fine Input Gain Fine Input Gain Fine Input Gain Fine Input Gain Fine Input Gain On On On On On Off Off Off Off Off Mute Fine Input Gain Input Processing On Off Mute ...

  • ClearOne comm PSR1212 - page 26

    20 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 ...

  • ClearOne comm PSR1212 - page 27

    T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 CHAPTER 3: System Configuration G- W are Requirements ClearOne’s G-W are sof tware provides an easy inter face for configuring and controlling your PSR1212. While some configuration can be done using the front panel LCD menus, G-W are is required to complete the custom configuratio ...

  • ClearOne comm PSR1212 - page 28

    System Configuration ~ Installing G-W are 22 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 T o select an alternate destination directory , click Browse and use the Choose Directory window to find the desired location. Click OK to return to the previous window. - Figure 3.1. Desktop icon Creating Floppy Disk Copies Depending upon ...

  • ClearOne comm PSR1212 - page 29

    23 System Configuration ~ Site Setup T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Site Setup Creating a new site New site files are created through the Site Properties window in G- Ware. A site file contains all information about a particular installation including all unit settings and properties. It also provides G-W are with ...

  • ClearOne comm PSR1212 - page 30

    System Configuration ~ Site Setup Adding a PSR1212 Y ou can add a PSR1212(s) to your site file by connecting to your site and using G-W are to automatically create icons for the detected units. Or , you can work offline and manually add the unit(s) to the site file and connect to the site at a later time. T o open an existing site file, click the O ...

  • ClearOne comm PSR1212 - page 31

    25 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 System Configuration ~ Site Setup Configuring Unit Properties Using the Unit Properties window , you can configure the unit’s communication and security properties in addition to general unit properties such as name and type. The Unit Properties window automatically opens when y ...

  • ClearOne comm PSR1212 - page 32

    System Configuration ~ Site Setup 26 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 8. If a modem is connected to the PSR1212 unit, select Use Modem and enter the initialization string. Click OK ; the PSR1212 will initialize the modem. 9. Click the Security tab. Create a modem password. The password will be required before contro ...

  • ClearOne comm PSR1212 - page 33

    G-W are has three modes: Configuration, Preset, and Macro R ecorder. Configuration is used to configure the unit and is the default mode. The Preset and Macro modes are discussed in Chapter 4: Advanced Configuration. Y ou can switch between modes by clicking on the corresponding toolbar button. The current mode is displayed on the status bar. There ...

  • ClearOne comm PSR1212 - page 34

    28 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 System Configuration ~ G-W are Screens Figure 3.17. Unit shortcut menu Figure 3.19. Safety Mute Figure 3.18. Inputs 1– 8 shortcut menu Copying and pasting settings G-W are has shortcut menus which appear when you right-click a selection or program window in G-W are. These shortc ...

  • ClearOne comm PSR1212 - page 35

    Matrix Screen The Matrix Screen is used to route audio to one or more destinations (outputs, expansion bus, or processing). Any number of connections to outputs can be made in the matrix. The Matrix Screen can also be used to access the Input, Output, and Processing configuration windows by clicking on the buttons along the top and left sides of th ...

  • ClearOne comm PSR1212 - page 36

    System Configuration ~ Audio R outing 30 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Audio is routed in the Matrix Screen (see Figure 3. 20 on previous page). T o access the Matrix Screen, click on the Matrix button on the Flow Screen. T o return to the Flow Screen, click the Flow Screen button. The PSR1212 routing matrix has ...

  • ClearOne comm PSR1212 - page 37

    31 System Configuration ~ Audio R outing T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 numerical value directly in the window). The attenuation range is from 0 to - 60dB. Click Close to exit. Note that the level control you have selected for the cross point is indicated numerically in the cross point cell. The Cross P oint short ...

  • ClearOne comm PSR1212 - page 38

    System Configuration ~ Inputs and Outputs 32 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Inputs 1– 8 T o open the Inputs 1–8 configuration window , click the Inputs 1–8 button on the Flow Screen. The In 1–8 button on the Matrix Screen will also open this window. These inputs are balanced and support both mic and line l ...

  • ClearOne comm PSR1212 - page 39

    33 System Configuration ~ Inputs and Outputs T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 12dB closer to the target. AGC occurs af ter the gain and filter settings in the audio signal path. AGC default is Off. P Pwr (Phantom Power) Phantom P ower toggles the phantom power on and off. Phantom power is an auxiliar y power source ...

  • ClearOne comm PSR1212 - page 40

    System Configuration ~ Inputs and Outputs 34 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 • Low P ass. Selectable frequency cutoff is 20Hz to 20kHz in 1Hz increments. R olloff is 12dB/octave. Level is fixed at 0dB. • Notch. Center frequency range is 20Hz to 20kHz with resolution to 1Hz or four places (whichever is larger). ...

  • ClearOne comm PSR1212 - page 41

    35 System Configuration ~ Inputs and Outputs T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 T o configure filters 1. In either the graph or table view , select the filter type from the Ty p e list. Note that the configurable filter parameters displayed depend on the selected filter type. 2. Click Add Filter to add a filter to the ...

  • ClearOne comm PSR1212 - page 42

    System Configuration ~ Inputs and Outputs 36 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Chairman Override Chairman Over ride provides gating priority for this mic input over any other mic input within the same gating control (mixer) groups. When a mic with Chair man Override enabled gates on, all mics which don’t have Chair ...

  • ClearOne comm PSR1212 - page 43

    37 System Configuration ~ Inputs and Outputs T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Ambient Level if you want to specify a fixed reference point rather than one that adjusts for background noise. The range is from -80 to 0dB. Default is Off. Decay Rate Decay R ate determines how fast a channel gates off af ter the hold ti ...

  • ClearOne comm PSR1212 - page 44

    System Configuration ~ Inputs and Outputs 38 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 If you select a virtual reference , the Virtual R eference window will open. Y ou can also open this window from the G-W are toolbar. Use this window to select which signals will be included in each of the four Vir tual R e fere nce poi nt ...

  • ClearOne comm PSR1212 - page 45

    39 System Configuration ~ Inputs and Outputs T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Gating Group Select In addition to specifying gating characteristics for each mic input, you can assign the inputs to a gating group for greater flexibility and control. Wh en i nputs are assigned to a gating group, the gating information ...

  • ClearOne comm PSR1212 - page 46

    System Configuration ~ Inputs and Outputs 40 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 3. Leave 1st Mic Priority selected (default) to enable this feature; other wise, clear the selection to disable it. ClearOne recommends leaving this setting on. This setting helps maintain maximum audio intelligibility by allowing only one ...

  • ClearOne comm PSR1212 - page 47

    41 System Configuration ~ Inputs and Outputs T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 commands are used. Optimizing input gain structure How you adjust an input’s gain directly affects sound quality. The optimal input gain setting is one which is adjusted as high as possible above the noise floor without introducing clipp ...

  • ClearOne comm PSR1212 - page 48

    System Configuration ~ Inputs and Outputs 42 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Inputs 9– 12 The PSR1212 supports four line level only inputs for auxiliar y audio sources such as VCRs and CD players. T o open the Inputs 9–12 configuration window , click the Inputs 9–12 button on the Flow Screen. The In 9–12 bu ...

  • ClearOne comm PSR1212 - page 49

    43 System Configuration ~ Inputs and Outputs T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Gain The Gain slider on the selected input in the Inputs 9–12 window is used to adjust input volume level. • Use the Gain slider to adjust input volume level. Y ou can also enter the level directly in the decibel box below the gain sca ...

  • ClearOne comm PSR1212 - page 50

    System Configuration ~ Inputs and Outputs 44 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Outputs 1– 12 The PSR1212 has 12 line level outputs for sending audio to recorders or amplifiers. T o open the Outputs 1–12 configuration window , click the Outputs 1–12 button on the Flow Screen. The Outputs 1–12 button on the Mat ...

  • ClearOne comm PSR1212 - page 51

    45 System Configuration ~ Inputs and Outputs T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 passing NOM information. Enable NOM if you want to place this output in a constant gain mode. Default is on. When enabled, the NOM button light illuminates green. Gain The Gain slider on the selected output in the Outputs 1–12 window is ...

  • ClearOne comm PSR1212 - page 52

    System Configuration ~ Expansion Buses 46 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 F rom Expansion Bus O– Z Click the From Expansion Bus O–Z button on the Flow Screen to open the F rom Expansion Bus Labels window. Y ou can also access this window from the Matrix Screen. • Enter the names you want to use for each expan ...

  • ClearOne comm PSR1212 - page 53

    47 System Configuration ~ Processing T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Processing A– H There are eight processing block s in the PSR1212, each with filters, compressors, and delay to provide pinpoint audio configuration s. T o open the Processing configuration window , click the Processing A–H button on the Flow ...

  • ClearOne comm PSR1212 - page 54

    System Configuration ~ Processing 48 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Cmprs (compressor) Cmprs opens the Compressor Setup window (see Figure 3. 46). With the compressor you can change the gain transfer characteristics of the signal path and control the dynamics of a signal. When the signal exceeds the threshold leve ...

  • ClearOne comm PSR1212 - page 55

    49 System Configuration ~ Processing T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Post Compressor Gain Adjust the compressor gain with the gain slider or by using the s and t buttons. The graph reflects the input/output decibel levels with the gain setting you select. Threshold Threshold determines the RMS level at which the co ...

  • ClearOne comm PSR1212 - page 56

    System Configuration ~ Processing 50 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 The frequency response and phase vs frequency of the total transfer function of all filters is displayed in the window. Each filter can be disabled without affecting the filter settings. All filters can also be disabled using a single command. By ...

  • ClearOne comm PSR1212 - page 57

    51 System Configuration ~ Processing T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 R efer to the figure above. Note that as you create filters across several processing channels, you can obser ve their crossover points and general shape of the frequency response. In this case, several Linkwitz-Riley filters are being created acr ...

  • ClearOne comm PSR1212 - page 58

    System Configuration ~ Processing 52 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Introducing an appropriate amount of delay to the for ward-mounted driver(s) re-establishes the acoustical alignment necessar y for proper sound imaging in a room. The same principle of introducing delay applies to separate speaker enclosures loca ...

  • ClearOne comm PSR1212 - page 59

    T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 CHAPTER 4: Advanced Configuration Presets Over view For many audio conferencing applications, a great deal of system flexibility is needed to meet the challenges presented by changing meeting or conference room requirements. These requirements might include changes in muting, audio s ...

  • ClearOne comm PSR1212 - page 60

    Advanced Configuration ~ Presets 54 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Figure 4.3. Preset Configuration pane Matrix Screen The Matrix Screen in the Preset Mode is very similar to the Matrix Screen in Configuration Mode. All Input, Output, and Processing windows can be accessed by clicking on their respective buttons. ...

  • ClearOne comm PSR1212 - page 61

    55 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Advanced Configuration ~ Presets Figure 4.5. Preset Macros Window Preset Description. Use the Preset Description box for entering information about the preset. This description is stored in the site file, not the unit. Preset Mask Control/Status B. With Preset Mask Control Status ...

  • ClearOne comm PSR1212 - page 62

    Advanced Configuration ~ Presets 56 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Virtual Reference. The Virtual R eference button opens the preset Virtual R eference window. Using the Virtual R eference window , you can select which signals will be used by the four Virtual R eference points in this preset configuration. The onl ...

  • ClearOne comm PSR1212 - page 63

    57 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Advanced Configuration ~ Presets T o create a preset 1. From the Preset Selection list, select the number of the preset you will be configuring. Enter a description of the preset in the Preset Description box. 2. If you want to password protect this preset, click Protected . See p ...

  • ClearOne comm PSR1212 - page 64

    Advanced Configuration ~ Presets 58 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 R unning presets Presets can be run from G-W are or the front panel controls on the PSR1212. Y ou can also program external control devices (such as AMX or Crestron, ClearOne Control P anels, XAP IR R emote, and GPIO devices) or use macros to r un ...

  • ClearOne comm PSR1212 - page 65

    59 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Advanced Configuration ~ Presets If a preset is flagged as “ On,” nothing will happen when the preset is executed again because the system knows it has already been r un. This prevents any manual adjustments that are made during the course of the meeting (gain, muting, etc. ) ...

  • ClearOne comm PSR1212 - page 66

    Advanced Configuration ~ Presets 60 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 The four macros (one for each configuration) are set up as follows: When the room is in Configuration 1, r unning the Configuration 2 macro will change the presets to the following states: • P1 does not change because the flag is already set (1) ...

  • ClearOne comm PSR1212 - page 67

    61 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Advanced Configuration ~ Macros A macro is a series of commands which can be r un from G- Ware, the front panel controls, or by using any external control device. Macros streamline the operation of the PSR1212, allowing you to make quick configuration changes and, as previously di ...

  • ClearOne comm PSR1212 - page 68

    Advanced Configuration ~ Macros 62 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 T o create a macro using Macro Editor 1. Click the Macro Editor button in the G-W are toolbar to open the Macro Editor. 2. Select the Macro (from 1 to 255) you are creating from the Macro list. Numbers that are already assigned to macros will be mar ...

  • ClearOne comm PSR1212 - page 69

    63 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Advanced Configuration ~ Macros 9. Click Add to place the command into the macro. The command line now appears in the command line table. Y ou can now create another command line for the macro or save the completed macro. Editing macros With the Macro Editor , you can add, edit, o ...

  • ClearOne comm PSR1212 - page 70

    Advanced Configuration ~ Macros 64 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 R unning macros Macros can be r un from G- Ware or the front panel controls on the PSR1212. Y ou can also r un a macro using external control devices (see Chapter 6: Control for more information). T o run a macro using G-W are 1. Select the R un Mac ...

  • ClearOne comm PSR1212 - page 71

    T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 G-W are features several tools designed to assist you as you install your PSR1212 Digital Matrix Mixer including Signal Generator , Document Compare, Print R eports, Copy and P aste, and Message Log. G-Ware also provides Gate Views and Meters so you can quickly monitor or troubleshoo ...

  • ClearOne comm PSR1212 - page 72

    Operation ~ Utilities 66 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 T o use tone 1. Select the PSR1212 Unit and Input Channel the signal will be generated on. 2. Select T one. 3. Using the F requency slider , select a specific tone frequency. Y ou can also enter the frequency in the box directly below the Frequency slider. ? ...

  • ClearOne comm PSR1212 - page 73

    67 Operation ~ Utilities T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 4. R epeat steps 1–3 to select the second second unit, site, or file for comparison. When you click Open, G-W are automatically compares infor mation from the selected items and displays a table of parameters which differ (note that the actual differences a ...

  • ClearOne comm PSR1212 - page 74

    Operation ~ Utilities 68 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 6. T o print the report, click Print (you can also click P rint in the Compare Utility window to print the report). The other buttons in this window allow you to tailor the view of the report and browse sequentially through each page. 7. When you finish viewi ...

  • ClearOne comm PSR1212 - page 75

    69 Operation ~ Utilities T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 In the window shown in Figure 5. 8, clicking the Site 1 button transfers the selected settings from a line selected in the Site 2 column to the corresponding line in the Site 1 column. The Copy button copies the settings of the Site/Line above it, allowing yo ...

  • ClearOne comm PSR1212 - page 76

    Operation ~ Utilities 70 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 GFirm Firmware Utility T o make it easy to upgrade your unit when new firmware enhancements are released, G-W are features a built-in fir mware upgrade utility. Before upgrading firmware, save a copy of your site files and verify that the flow control setting ...

  • ClearOne comm PSR1212 - page 77

    71 Operation ~ Utilities T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 5. Select the PC COM port you are using for the upgrade. Select the Baud Rat e that matches the baud rate in the Site Properties window. 6. Click Next . If the upgrade requires you to save your site files, a warning message will display. Y ou will need to exi ...

  • ClearOne comm PSR1212 - page 78

    Operation ~ Utilities 72 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 G- W are Switcher G-W are Switcher allows you to alter nate between different G- Ware sof tware versions that are installed on the same PC. For example, if you need to upgrade the firmware on your ClearOne unit(s), G-W are Switcher allows you to easily switch ...

  • ClearOne comm PSR1212 - page 79

    73 Operation ~ Monitoring Views T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 If the selected G-W are version is not active, click Re-R egister/Make Shortcuts to re-register the version so it becomes active. Then click Run to launch it. If you have installed a version of G-W are that isn’t displayed in the G-W are Switcher win ...

  • ClearOne comm PSR1212 - page 80

    74 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Meter Views The Meter Views window allows you to monitor the level of any input, output, or processing signal of the PSR1212. Y ou can monitor the same parameter on multiple inputs (or outputs or processing channels) for comparison or you can monitor an entire signal flow from inp ...

  • ClearOne comm PSR1212 - page 81

    T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 There are many ways to control your PSR1212 and other networked units. This chapter explains how to set up control for Control/Status A port using GPIO Builder , XAP IR R emote and ClearOne Control P anel using R emote Builder , and RS-232 port. Control/Status A GPIO stands for gener ...

  • ClearOne comm PSR1212 - page 82

    Control ~ R emote Builder 76 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 The R emote Builder window is used to configure the optional XAP IR R emote Control and ClearOne V olume and Select Control P anels. These control devices are connected to R emote P anel A or R emote P anel B— the RS-485 connectors. If you want to creat ...

  • ClearOne comm PSR1212 - page 83

    77 Control ~ R emote Builder T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 T o program the XAP IR Remote 1. Select an ID number for the remote from the Select R emote ID list. 2. Click Change Name to create a more descriptive name for the remote which is displayed in addition to the remote number (limit 20 characters). 3. Select ...

  • ClearOne comm PSR1212 - page 84

    Control ~ R emote Builder 78 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 T o program the V olume panel 1. Select an ID number for the remote from the Select R emote ID list. 2. Click Change Name to create a more descriptive name (limit 20 characters) for the remote which is displayed in addition to the remote number in the Sel ...

  • ClearOne comm PSR1212 - page 85

    79 Control ~ R emote Builder T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 6. Select the Device T ype , ID , and Command from their respective lists. When you select a command, a description of it appears in the Command Description box. 7. Select the command parameters from the argument lists. The parameters that are available d ...

  • ClearOne comm PSR1212 - page 86

    Control ~ RS-232 Port 80 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 5. Click the Active Command or Inactive Command button to set the command for operation when the button is active or inactive. 6. Select the Device T ype , ID , and Command from their respective lists. When you select a command, a description of it appears in ...

  • ClearOne comm PSR1212 - page 87

    81 Control ~ RS-232 Port T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Command strings By creating command strings, you can use your PSR1212 to control equipment such as lighting, projectors, and room dividers as well as other ClearOne products. A command string is passed to the connected device via the PSR1212’s RS-232 port. ...

  • ClearOne comm PSR1212 - page 88

    82 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 ...

  • ClearOne comm PSR1212 - page 89

    T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 APPENDICES Dimensions (LxDxH) 17. 25" x 10. 25" x 1. 25" 43. 8 x 26 x 4. 5 cm W eight 7 lb/4. 5 kg dr y 12 lb/5. 9 kg shipping Operating T emperature 32–100° F/0–38° C Humidity 15% to 80%, non-condensing Power Input R ange Auto-adjusting 100–240V AC; 50/60Hz Po ...

  • ClearOne comm PSR1212 - page 90

    Appendices ~ Appendix B: Pinouts 84 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendix B: Pinouts RS-232 COM DCE port pinout (female) Pin Number Control Pin Number Control 1 DCD 6 DSR 2 TXD 7 CTS 3 RXD 8 R TS 4 DTR 9 No connection 5 Ground 1 5 6 9 Figure B.1. RS-232 connector PC PSR1 2 1 2 DB-9 Male DB-9 Female TXD (Pin 2) R ...

  • ClearOne comm PSR1212 - page 91

    85 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix B: Pinouts Control/Status A Port Pinout (female) Pin Definable T ype Default Description 1 Y es Control Lock front panel toggle 2 Y es Status Status of front panel lock 3 Y es Control Mute all mics toggle 4 Y es Status Status of mute all mics 5 Y es C Mute Ou ...

  • ClearOne comm PSR1212 - page 92

    86 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Control/Status B port pinout Pin Definable* T ype Default Description 1 No C Preset select bit 2 No S Preset select status for Pin 1 3 No C Preset select bit 4 No S Preset select status for Pin 3 5 No C Preset select bit 6 No S Preset select status for Pin 5 7 No C Preset select b ...

  • ClearOne comm PSR1212 - page 93

    87 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix B: Pinouts Set connector pinout Pin Description Pin Description 1 T o pin 6 of SET RJ-11C 4 Tip 2 T o pin 5 of SET 5 T o pin 2 of LINE 3 Ring 6 T o pin 1 of LINE RJ-11C Line connector pinout Pin Description Pin Description 1 T o pin 6 of LINE RJ-11C 4 Ring 2 ...

  • ClearOne comm PSR1212 - page 94

    Appendices ~ Appendix C: Control P anel 88 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendix C: Control P anel This equipment must be installed according to applicable local electrical codes. ! 1 2 3 4 5 6 7 8 O N O N Figure C.1. DIP switches Figure C.2. DIP switch settings Figure C.3. Wiring the Control Panels The V olume ...

  • ClearOne comm PSR1212 - page 95

    89 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix C: Control P anel 6. Connect one connector terminator block to the R emote P anel on the XAP/PSR unit. R oute the other end of the cable through the back of the electrical wall box and connect the terminator block to the Control P anel. 7. T o use a second Co ...

  • ClearOne comm PSR1212 - page 96

    Appendices ~ Appendix C: Control P anel 90 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 VOLUME CONTROL PANEL 910-155-051 F LAT H EA DS CRE WS (2) I NCLU D E DW I T HF ACEPLATE 46 0-155-001 F ACEPLATE 7 4 0-155-051 F AC I A PLATE 915-155-051 A SS EM B L Y, VOLUME CONTROL PANEL I NCLU D E S : 8 2 0-155-051 VOLUME CONTROL PANEL PC ...

  • ClearOne comm PSR1212 - page 97

    91 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix D: Accessories Accessory ClearOne P art Number T abletop Omni Microphone 910-103-160 (with cable) T abletop Uni Microphone 910-103-161 (with cable) Button Omni Microphone 910-103-162 (black button)/910-103-163 (white button) Button Uni Microphone 910-103-164 ...

  • ClearOne comm PSR1212 - page 98

    92 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix E: Serial Commands The PSR1212 accepts serial commands through the serial port or the expansion bus. The commands in this manual pertain only to the PSR1212. RS -23 2 se rial po rt p r otocol is 9,600, 19,200, 38,400 (default), or 57,600 baud; 8 bits, 1 stop ...

  • ClearOne comm PSR1212 - page 99

    93 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix E: Serial Commands Groups and channels If a channel has an alpha value of “ *” , the command is to be applied to all channels. For example, a group value of M and a channel value of * would mean that the command is to be applied to all channels of group M ...

  • ClearOne comm PSR1212 - page 100

    Appendices ~ Appendix E: Serial 94 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Meter type definitions Serial command error codes Error number T ext message Explanation/Solution 1 Memor y error The box is out of internal memor y. Power cycle the box. 2 No command found A command was not found in the string. 3 Unknown command A ...

  • ClearOne comm PSR1212 - page 101

    95 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 PSR1212 Serial commands Command Function AAMB Selects/reports adapt ambient setting AGC Enable/disables AGC AMBL VL Selects/reports ambient level BAUD Selects/reports the baud rate of the serial port CGROUP Selects/reports compressor group setting CHAIRO Selects/reports chairman o ...

  • ClearOne comm PSR1212 - page 102

    96 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix E: Serial Commands Command Function NOM Selects/reports NOM setting on output channels OFF A Selects/reports off attenuation mode for Inputs 1–8 P AA Selects P A adapt mode for specified input PP Selects/reports phantom power setting PRESET Executes preset ...

  • ClearOne comm PSR1212 - page 103

    97 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix E: Serial Commands A AMB - Adaptive Ambient Mode This command selects/reports the setting of adaptive ambient. Command form: DEVICE AAM B <Channel> <Group> [V alue] Argument details Name Description Device 0–7 or * to select all units AAMB Comma ...

  • ClearOne comm PSR1212 - page 104

    98 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix E: Serial Commands BAUD - Baud R ate This command selects/reports the baud rate of the serial port. Command form: DEVICE BAUD [V alue] Argument details Name Description Device 0–7 or * to select all units BAUD Command form V alue 9600, 19200, 38400, 57600 ( ...

  • ClearOne comm PSR1212 - page 105

    99 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 COMPRESS - Compressor Adjust This command selects/reports the setting of the compressor on processing channels. Command form DEVICE COMPRESS <Channel> [Threshold] [R atio] [Attack] [R elease] [Gain] Argument details Name Description Units Device 0–7 or * to select all unit ...

  • ClearOne comm PSR1212 - page 106

    Appendices ~ Appendix E: Serial Commands 100 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 DECA Y - Decay Adjust This command selects/reports the setting of the decay rate for a specified input. Command form: DEVICE DECA Y <Channel> [V alue] Argument details Name Description Device 0–7 or * to select all units DECA Y Com ...

  • ClearOne comm PSR1212 - page 107

    101 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 DFL TM - Default Meter This command selects/reports the setting of the default meter. Command form: DEVICE DFL TM [Channel] [Group] [P osition] Argument details Name Description Device 0–7 or * to select all units DFL TM Command for m Channel 1–12 Group I = Inputs, O = Output ...

  • ClearOne comm PSR1212 - page 108

    Appendices ~ Appendix E: Serial Commands 102 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 FIL TER - Filter Adjust This command selects/reports the setting of filters. Command form: DEVICE FIL TER <Channel> <Group> <Node> [T ype] [Frequency] [Gain] [Bandwidth] Argument details Name Description Device 0–7 or * ...

  • ClearOne comm PSR1212 - page 109

    103 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix E: Serial Commands FIL TSEL - Filter Select This command turns on and off the filters on input and audio processing channels. Command form: DEVICE FIL TSEL <Channel> <Group> <Node> [V alue] Argument details Name Description Device 0–7 or ...

  • ClearOne comm PSR1212 - page 110

    104 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix E: Serial Commands FPP - F ront P anel P asscode This command sets and reports the current passcode setting for the unit. Each character in the password represents a button on the front panel. See button assignment table below. When the user is requested to ...

  • ClearOne comm PSR1212 - page 111

    105 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix E: Serial Commands GA TE - Gate Status This command reports the gate status of mics. This command is read only. Command form: DEVICE GA TE Argument details Name Description Device 0–7 or * to select all units GA TE Command for m The command will return the ...

  • ClearOne comm PSR1212 - page 112

    Appendices ~ Appendix E: Serial Commands 106 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 GMODE - Gating Mode This command selects/reports the setting of gating mode. Command form: DEVICE GMODE <Channel> [V alue] Argument details Name Description Device 0–7 or * to select all units GMODE Command form Channel 1–8 (sele ...

  • ClearOne comm PSR1212 - page 113

    107 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix E: Serial Commands GREPORT - Gate R eport This command selects/reports the gate status. Command form: DEVICE GREPORT <V alue> Argument details Name Description Device 0–7 or * to select all units GREPOR T Command form V alue 0 = Off, 1 = On, 2 = T og ...

  • ClearOne comm PSR1212 - page 114

    108 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 LFP - L ock F ront P anel This command sets and reports front panel access for the unit. When the unit is locked, access is not allowed to the unit until the unit is unlocked. Command form: DEVICE LFP [V alue] Argument details Name Description Device 0–7 or * to select all unit ...

  • ClearOne comm PSR1212 - page 115

    109 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix E: Serial Commands L OCKPRST - Apply the lock to a preset or macro Selects/reports whether the lock is applied to a preset/macro. If a preset/macro has the lock applied, it can be changed only if unlocked with the password. Command form: DEVICE L OCKPRST < ...

  • ClearOne comm PSR1212 - page 116

    L VLREPORT - L evel Report This command selects level status reporting. Command form: DEVICE L VLREPORT <Channel> <Group> [P osition] [Value] Argument details Name Description Device 0–7 or * to select all units L VLREPOR T Command form Channel See Groups and Channels, page 93 Group See Groups and Channels, page 93 P osition See Meter ...

  • ClearOne comm PSR1212 - page 117

    111 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix E: Serial Commands MACRO - Macro Ex ecution/Reporting This command executes a specified macro or reports the last macro executed. There are 255 macros that can be specified. Command form: DEVICE MACRO [V alue] Argument details Name Description Device 0–7 o ...

  • ClearOne comm PSR1212 - page 118

    MDMODE - Modem Mode This command enables or disables the modem mode for the unit. When the modem mode is enabled, the modem initialization string is sent out the serial port and the serial port now requires a password before a command is processed. Af ter five minutes of serial inactivity the passcode will be requested to continue serial activity. ...

  • ClearOne comm PSR1212 - page 119

    113 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix E: Serial Commands MINIT - Modem Initialization String This command sets/reports the modem initialization string of the serial port when in modem mode. Command form: DEVICE MINIT [String] Argument details Name Description Device 0–7 or * to select all unit ...

  • ClearOne comm PSR1212 - page 120

    MLINE - Mic/Line Adjust This command selects/reports the setting of coarse gain adjustment on the input channels 1-8. The three settings are 0dB, 25dB, and 55dB. Command form: DEVICE MLINE <Channel>[V alue] Argument details Name Description Device 0–7 or * to select all units MLINE Command for m Channel 1–8 (selects mic inputs) V alue 0 = ...

  • ClearOne comm PSR1212 - page 121

    115 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix E: Serial Commands MTRX - Matrix This command selects/reports the matrix routing of an input to an output. Command form: DEVICE MTRX <SRC CHNL> <SR C GRP> <DEST CHNL> <DEST GRP> [V alue] Argument details Name Description Device 0–7 ...

  • ClearOne comm PSR1212 - page 122

    MUTE - Mute This command selects/reports the setting of mute on input, output or processing channels. Command form: DEVICE MUTE <Channel> <Group> [V alue] Argument details Name Description Device 0–7 or * to select all units MUTE Command form Channel See Groups and Channels, page 93 Group I, O , M, P , L V alue 0 = Off, 1 = On, 2 = T ...

  • ClearOne comm PSR1212 - page 123

    117 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix E: Serial Commands P A A - P A Adaptive Mode This command selects/reports P A adaptive mode for the specified mixer. There can be only one selection per mixer. Command form: DEVICE PA A <Channel> [V alue] Argument details Name Description Device 0–7 ...

  • ClearOne comm PSR1212 - page 124

    118 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix E: Serial Commands PRGSTRING - Program String This command sets/reports a programmed string. Command form: DEVICE PRGSTRING <ID> [V alue] Argument details Name Description Device 0–7 or * to select all units PRGSTRING Command ID 0 – 7 (string locat ...

  • ClearOne comm PSR1212 - page 125

    119 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix E: Serial Commands RAMP – R amp Gain Adjustment This command starts/stops the gain ramp for an input, output, or assignable processing block. There is no quer y for this command. Command form: DEVICE RAMP <Channel><Group><R ate>[T arget] ...

  • ClearOne comm PSR1212 - page 126

    120 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 REFSET - R eference channel setup This command selects/reports the output the reference channel tracks. Command form: DEVICE REFSET <Channel> <Group>[V alue] Argument details Name Description Device 0–7 or * to select all units REFSET Command Channel 1–4 (select V ...

  • ClearOne comm PSR1212 - page 127

    121 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 SF TYMUTE - Safety mute Selects/reports the state of the safety mute. When on, the safety mute holds all outputs on the selected unit in a muted state. It is used primarily for troubleshooting G-W are. Command form: DEVICE SF TYMUTE [V alue] Argument details Name Description Devi ...

  • ClearOne comm PSR1212 - page 128

    122 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix E: Serial Commands SIG TOUT - Signal Generator Time Out Sets the signal generator time out for the unit. Command form: DEVICE SIGTOUT [V alue] Argument details Name Description Device 0–7 or * to select all units SIGGEN Command V alue 0 = Off, 1–30 = Set ...

  • ClearOne comm PSR1212 - page 129

    123 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 UID - Unit ID This command reports the unit ID. This command is read only. Command form: DEVICE UID [V alue] Argument details Name Description Units Device 0–7 or * to select all units UID Command V alue Null to retur n value Hexadecimal Example: #43 UID B465F991 The unit ID nu ...

  • ClearOne comm PSR1212 - page 130

    Appendices ~ Appendix F: W arranty 124 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 ClearOne Communications, Inc. (Manufacturer) warrants that this prod free of defects in both materials and workmanship. For full warranty and coverage, refer to the ClearOne website at www.clearone.com . Appendix F : W arranty ...

  • ClearOne comm PSR1212 - page 131

    125 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Appendices ~ Appendix F: Warranty ...

  • ClearOne comm PSR1212 - page 132

    Appendices ~ Appendix G: Compliance 126 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 FCC P art 15 Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to P art 15 of the FCC r ules. These limits are designed to provide reasonable protection against harmful inter fe ...

  • ClearOne comm PSR1212 - page 133

    Glossary 127 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Adaptive Ambient This portion of the mixer monitors the var ying ambient noise level in the room and changes the threshold level at which a microphone gates on. Ambient Level The manually-set background noise level upon which the PSR1212 bases gating protocols. Used only ...

  • ClearOne comm PSR1212 - page 134

    128 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Glossary Clipping A condition in which a signal level exceeds the maximum level a circuit can handle. This is usually caused by improper gating parameters and gain settings. It causes distortion and typically leads to listener fatigue and accelerated failure of loudspeaker driver ...

  • ClearOne comm PSR1212 - page 135

    Glossary 129 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Decay Rate (slow , medium, fast) Determines how fast a channel gates off af ter hold time expires. Default is medium. Default meter The input/output displayed on the front panel LED meter when a input/output meter is not specifically selected elsewhere. Delay A setting i ...

  • ClearOne comm PSR1212 - page 136

    130 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Glossary the designated frequency occurs at a fixed 6dB/octave rate. The gain or loss below the corner frequency is adjustable to +/- 15dB. Filter Display A group of nodes plotted on a logarithmic scale. The PSR1212’s filter display can be accessed through the Inputs 1-8, From ...

  • ClearOne comm PSR1212 - page 137

    Glossary 131 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 GPIO (general purpose input/output) The Control/Status A and B ports on the PSR1212 unit. The GPIO Builder is used to program Control/Status A pins. G-W are Software The PSR1212’s setup and configuration sof tware. Hold Time The length of time that a microphone remains ...

  • ClearOne comm PSR1212 - page 138

    132 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Glossary Mix er mode The mixer mode has two settings: master and slave. Mixer mode can be configured from the front panel or in the Unit Properties window. Mute A condition in which an audio signal is attenuated below the audible threshold. Number of Open Mics (NOM)/Constant Gain ...

  • ClearOne comm PSR1212 - page 139

    Glossary 133 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 •P r e s e t The preset password is created in the Unit Properties window and makes it possible to lock certain presets. A locked preset can be executed without the password. However , a password must be entered to edit the preset. • Site file (File Access) The site ...

  • ClearOne comm PSR1212 - page 140

    134 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 S– Z buses These eight buses are defaulted as auxiliar y mix buses. They are used to route auxiliar y audio to and from other units on the network. These buses are also used as mic mix buses when NOM count is not required. Serial Command A bit description designed to execute an ...

  • ClearOne comm PSR1212 - page 141

    Glossary 135 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 you to reference multiple signals without sacrificing an analog output. Y ou can open the Virtual R eference window from the G-W are toolbar or from the Acoustic Echo Cancellation window. White Noise Acoustical noise with equal energy throughout a given frequency range. ...

  • ClearOne comm PSR1212 - page 142

    Index 136 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 A adaptive ambient 37, 37, 83, 97, 127 add unit 24 AGC see automatic gain control All P ass 33, 49, 83, 102, 129 ambient level 36–37, 40, 97, 127 ambient noise 35, 127 attack time see Compressor audio routing 29, 30–31, 53, 127 O–Z routing 30 Process A–H routing 30 ...

  • ClearOne comm PSR1212 - page 143

    Index 137 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 gain str ucture 41, 43, 45, 52, 130 Gate 35, 105–107, 130 activation 35 adaptive ambient 36 ambient level 36–37 auto-gate 35 chairman over ride 36 decay rate 37 gate ratio 36 hold time 36 manual off 35 manual on 35 off attenuation 36 P A Adaptive mode 36 Gate View 73 Ga ...

  • ClearOne comm PSR1212 - page 144

    Index 138 T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 N NOM 30, 35, 44, 45, 116, 132 non-gated 5, 29, 30, 35 Notch 34, 49, 83, 102 O Outputs 1–12 6, 10, 18, 44–45, 83 mute 44 NOM 44 Outputs menu 18 gain 18 mute 18 O–R buses 7, 30, 132 P P A Adapt R eference 7, 37–38, 119, 120, 132 buses 7 P A Adaptive Mode 36 password ...

  • ClearOne comm PSR1212 - page 145

    139 Index T echnical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 signal generator 65 site file 23, 24, 134 Site Properties 16, 23, 25, 134 Communication 23 Security 23 Use Modem 23 slave setting 12, 15, 25, 111 specifications 83 status bar 28 status lights 28 storage capacity 57, 61 Sync 24, 25, 28 System menu 14 Device ID 15 Firmware Ve ...

Manufacturer ClearOne comm Category Musical Instrument

Documents that we receive from a manufacturer of a ClearOne comm PSR1212 can be divided into several groups. They are, among others:
- ClearOne comm technical drawings
- PSR1212 manuals
- ClearOne comm product data sheets
- information booklets
- or energy labels ClearOne comm PSR1212
All of them are important, but the most important information from the point of view of use of the device are in the user manual ClearOne comm PSR1212.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals ClearOne comm PSR1212, service manual, brief instructions and user manuals ClearOne comm PSR1212. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product ClearOne comm PSR1212.

Similar manuals

A complete manual for the device ClearOne comm PSR1212, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use ClearOne comm PSR1212 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of ClearOne comm PSR1212.

A complete ClearOne comm manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual ClearOne comm PSR1212 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the ClearOne comm PSR1212, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the ClearOne comm PSR1212, that we can find in the current document
3. Tips how to use the basic functions of the device ClearOne comm PSR1212 - which should help us in our first steps of using ClearOne comm PSR1212
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with ClearOne comm PSR1212
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of ClearOne comm PSR1212 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning ClearOne comm PSR1212?

Use the form below

If you did not solve your problem by using a manual ClearOne comm PSR1212, ask a question using the form below. If a user had a similar problem with ClearOne comm PSR1212 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)