English dropdown-ico

Manual JVC RX-D412BUJ

58 pages 2.31 mb
Download

Go to site of 58

Summary
  • JVC RX-D412BUJ - page 1

    LV T1572-010A [UJ] RX-D412B AU DIO/VIDEO CONTR OL RECEIVER INSTR UCTIONS Cover[UJ].indd 1 Cover[UJ].indd 1 06.6.27 2:32:58 PM 06.6.27 2:32:58 PM ...

  • JVC RX-D412BUJ - page 2

    G-1 Warnings, Cautions, and Others Caution–– STANDBY/ON button! Disconnect the mains plug to shut the power off completely (the standby lamp goes off). When installing the apparatus, ensure that the plug is easily accessible . The ST ANDBY/ON button in any position does not disconnect the mains line. • When the unit is on standby , the standb ...

  • JVC RX-D412BUJ - page 3

    Features Hybrid Feedback Digital Amplifier RX-D412B features the JVC-exclusive Hybrid Feedback Digital Amplifier. Premium-grade parts and devices, and special internal construction assure you will enjoy superior sound. Compatible with HDMI* The HDMI (High-Definition Multimedia Interface) is the standard interface for the next-generation TV. By conn ...

  • JVC RX-D412BUJ - page 4

    Table of Contents Parts identification ...................................................... 3 Getting started ............................................................ 6 Before installation ............................................................................. 6 Checking the supplied accessories ......................................... ...

  • JVC RX-D412BUJ - page 5

    Parts identification 7 Remote control See pages in parentheses for details. 1 MUTING button (22) 2 Standby/on buttons (16, 20, 47 – 51) AUDIO, DVR/DVD , VCR , DBS/CATV , TV/SIRIUS 3 Source selecting buttons (20, 24, 26, 47 – 51) DVR/DVD, VCR, DBS, TV, USB, XM, FM/AM, SIRIUS 4 TV VOL (volume) +/– button (47, 49) 5 CHANNEL +/– button (27, 47 ...

  • JVC RX-D412BUJ - page 6

    See pages in parentheses for details. Front Panel 1 STANDBY/ON button and standby lamp (16, 20) 2 CC CONVERTER button (23) 3 SETTING button (30) 4 ADJUST button (35) 5 SURROUND button (44) 6 HDMI lamp (9, 21) 7 Source lamps DVR/DVD, VCR, DBS, TV/SIRIUS, USB, XM, FM/AM 8 • SET button (20, 30, 35) • TUNER PRESET button (25, 28) 9 • SOURCE SELEC ...

  • JVC RX-D412BUJ - page 7

    See pages in parentheses for details. Rear Panel 1 Power cord (14) 2 VOLTAGE SELECTOR (6) 3 HDMI terminals (9) VCR(DBS) IN, DVR/DVD IN, MONITOR OUT 4 AV COMPU LINK- III terminals (45) 5 DIGITAL IN terminals (14) • Coaxial: 1(DVR/DVD) • Optical: 2(DBS) • Optical: 3(VCR) 6 DIGITAL OUT terminal (14) 7 XM jack (7) 8 FM/AM ANTENNA terminals (7) 9 ...

  • JVC RX-D412BUJ - page 8

    Before installation 7 General precautions • Be sure your hands are dry. • Turn the power off to all components. • Read the manuals supplied with the components you are going to connect. 7 Locations • Install the receiver in a location that is level and protected from moisture and dust. • The temperature around the receiver must be between ...

  • JVC RX-D412BUJ - page 9

    NOTES • If the AM loop antenna wire is covered with vinyl, remove the vinyl while twisting it as shown on the right. • Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. This could cause poor reception. Connecting the antennas Do not connect the AC power cord until all other connections have been ...

  • JVC RX-D412BUJ - page 10

    CAUTIONS: • Use speakers with the SPEAKER IMPEDANCE indicated by the speaker terminals (6 Ω – 16 Ω ). • DO NOT connect more than one speaker to one speaker terminal. 7 Connecting the speakers Turn off all components before making connections. To connect the center speaker and the front speakers 1 Cut, twist and remove the insulation at th ...

  • JVC RX-D412BUJ - page 11

    Connecting video components Do not connect the AC power cord until all other connections have been made. 7 HDMI connection IMPORTANT: The HDMI video signals from the HDMI terminals are transmitted only through the HDMI MONITOR OUT terminal. Therefore, you cannot view the playback picture on the TV: – when the TV is connected to the receiver throu ...

  • JVC RX-D412BUJ - page 12

    7 Audio/video connection In addition to the HDMI terminals, this receiver is equipped with three video terminals—composite video, S-video, and component video terminals, and two audio jacks—analog discrete 5.1 channel audio input jacks (DVD MULTI IN) and stereo audio jacks. • If your video components have S-video (Y/C-separation) and/or compo ...

  • JVC RX-D412BUJ - page 13

    Do not connect the AC power cord until all other connections have been made. Connecting a DVD recorder or DVD player with its analog discrete output jacks (DVD MULTI IN): If your DVD recorder or DVD player has analog 5.1 channel output jacks, use the connection below. When a DVD-Audio disc is played back, the original high-quality multi-channel sou ...

  • JVC RX-D412BUJ - page 14

    Do not connect the AC power cord until all other connections have been made. Turn off all components before making connections. • When you connect the components, refer also to their manuals. Connecting a VCR: Component video cable (not supplied) Stereo audio cable (not supplied) Composite video cable (not supplied) S-video cable (not supplied) C ...

  • JVC RX-D412BUJ - page 15

    Do not connect the AC power cord until all other connections have been made. Turn off all components before making connections. • When you connect the components, refer also to their manuals. Connecting a DBS tuner: Composite video cable (not supplied) S-video cable (not supplied) DBS tuner White Red : signal flow Green Blue Red Component video c ...

  • JVC RX-D412BUJ - page 16

    7 Digital audio connection This receiver is equipped with three DIGITAL IN terminals— one digital coaxial terminal and two digital optical terminals— and one DIGITAL OUT terminal. To reproduce the digital sound, use the digital audio connection in addition to the analog audio connection methods described on pages 10 to 13. Turn off all componen ...

  • JVC RX-D412BUJ - page 17

    USB connection This receiver is equipped with a USB terminal on the front panel. You can connect your PC to this terminal and enjoy sound reproduced through your PC. When you connect your PC for the first time, follow the procedure below. • Remember you cannot send any signal or data to your PC from this receiver. IMPORTANT: Check if your PC equi ...

  • JVC RX-D412BUJ - page 18

    By using Precise Surround Setup, you can optimize the speaker settings easily, quickly and systematically without troublesome adjustments. To obtain the best possible sound effect from the Surround/ DSP modes, set up the speaker and subwoofer information after all the connections are completed. Setting the speakers automatically Precise Surround Se ...

  • JVC RX-D412BUJ - page 19

    3 Put on the microphones. • Insert the microphone with “L” into your left ear, the microphone with “R” your right ear. 4 Take your usual listening position with the microphones and the remote control. CAUTION: Keep quiet so that Precise Surround Setup can detect test tones properly. 5 Press and hold PSS on the remote control for about 4 s ...

  • JVC RX-D412BUJ - page 20

    6 Unplug the earphone-type microphones. • When unplugging the microphones, pull on the plug, not the cord itself. NOTES • Do not press any buttons on the remote control or the front panel of the receiver during Precise Surround Setup; otherwise, the receiver stops setting and returns to the normal operation mode. – After “COMPLETE” is dis ...

  • JVC RX-D412BUJ - page 21

    Troubleshooting for Precise Surround Setup When problems occur, a message appears on the display during Precise Surround Setup. In this case, refer to the following solution, then perform Precise Surround Setup again. • To restart Precise Surround Setup, press PSS on the remote control; however, when you have turned the receiver off for the solut ...

  • JVC RX-D412BUJ - page 22

    1 Turn on the power Press STANDBY/ON (or AUDIO on the remote control). The standby lamp goes off and the current source lamp lights in red. To turn off the power (into standby): Press STANDBY/ON (or AUDIO on the remote control) again. The standby lamp lights in red. NOTES • A small amount of power is consumed in standby mode. To turn the power of ...

  • JVC RX-D412BUJ - page 23

    7 Selecting the video input setting From the remote control ONLY: 1 Press one of the source selecting buttons to select the source you want. 2 Press VIDEO INPUT to select the video input setting. • Each time you press the button, the input setting changes as follows. This setting is memorized for each source. NOTE For “VCR” and “DBS,” set ...

  • JVC RX-D412BUJ - page 24

    NOTES • “HDMI” is selectable only when the video input setting is also set to “HDMI” (see page 21). The audio input setting may automatically change if you change the video input setting to or from “HDMI.” In such a case, make sure that the appropriate setting is selected. • “DIGITAL” is available for the source which is assigne ...

  • JVC RX-D412BUJ - page 25

    Turning off the power with the Sleep Timer You can fall asleep while listening to music—Sleep Timer. From the remote control ONLY: Press SLEEP repeatedly. • Each time you press the button, the shut-off time changes in 10-minute intervals. The SLEEP indicator lights up on the display. When the shut-off time comes: The receiver turns off automati ...

  • JVC RX-D412BUJ - page 26

    FM/AM tuner operations NOTE When you have selected “FM” or “AM” by using SOURCE SELECTOR on the front panel, the remote control may not work for tuner operations. To use the remote control for tuner operations, select “FM” or “AM” by using the FM/AM button on the remote control. FM/AM tuner operations are mainly done from the remote ...

  • JVC RX-D412BUJ - page 27

    3 Press the numeric buttons (0 – 9, h 10) to select a channel number while the channel number position is flashing. • For channel number 5, press 5. • For channel number 10, press h 10, 1, then 0. • For channel number 25, press h 10, 2, then 5. 4 Press MEMORY again while the selected channel number is flashing on the display. The selected c ...

  • JVC RX-D412BUJ - page 28

    XM Satellite Radio operations NOTE When you have selected “XM” by using SOURCE SELECTOR on the front panel, the remote control may not work for XM Satellite Radio operations. To use the remote control for the XM Satellite Radio operations, select “XM” by using the XM button on the remote control. This is an XM Ready® receiver. • Before o ...

  • JVC RX-D412BUJ - page 29

    7 To tune in to channels From the remote control ONLY: Channel Search You can search and tune in to all channels. 1 Press XM to select “XM” as the source. 2 Press repeatedly or hold CHANNEL +/– until the desired channel number appears on the display. • Pressing (or holding) CHANNEL + increases the channel number. • Pressing (or holding) C ...

  • JVC RX-D412BUJ - page 30

    4 Press MEMORY again while the selected preset number is flashing on the display. 5 Repeat steps 1 to 4 until you store all the desired channels. To erase a stored preset channel Storing a new channel on a used preset number erases the previously stored one. 7 To tune in a preset channel From the remote control: 1 Press XM. The last received channe ...

  • JVC RX-D412BUJ - page 31

    Basic settings To obtain the best possible sound effect from the Surround/ DSP modes (see pages 39 to 44), you need to set up the speaker and subwoofer information after all the connections are completed. From pages 29 to 34, how to set speakers and other basic items of the receiver are explained. Basic setting items You can adjust the following it ...

  • JVC RX-D412BUJ - page 32

    Operating procedure On the front panel ONLY: Before you start, remember... There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again. Ex.: When setting the DIGITAL IN 1 terminal 1 Press SETTING. MULTI JOG now works for the setting operation. 2 Turn MULTI JOG until the item you want to ...

  • JVC RX-D412BUJ - page 33

    7 Setting the surround back speaker(s)— S BACK OUT Register the number of the surround back speaker(s). SB OUT 1SPK Select when you use a single surround back speaker. SB OUT 2SPK Select when you use 2 surround back speakers. Initial setting: 2SPK NOTES • When “S BACK SPK” is set to “NO,” you cannot select “S BACK OUT.” • When “ ...

  • JVC RX-D412BUJ - page 34

    Activating the EX/ES/PLIIx setting— EX/ES/PLIIx Depending on this setting, available Surround modes for digital multi-channel software vary—EX/ES/PLIIx (7.1- channel) reproduction or 5.1-channel reproduction. Select an appropriate setting for your enjoyment. • For details about relation between EX/ES/PLIIx setting and available Surround mode, ...

  • JVC RX-D412BUJ - page 35

    Setting bass sound 7 Setting subwoofer output—SUBWOOFER OUT The subwoofer emits the LFE signals* and the bass elements of each speaker set “SML (small).” You can also make the bass elements of the front speakers (MAIN) emitted through the subwoofer. SW LFE The subwoofer emits the LFE signals and the bass elements of the speakers set to “SML ...

  • JVC RX-D412BUJ - page 36

    Setting the digital input (DIGITAL IN) terminals—DIGITAL IN 1/2/3 When you use the digital input terminals, register what components are connected to which terminals—DIGITAL IN 1/2/3 (see page 14) so that the correct source name will appear when you select the digital source. Select one of the following components for each terminal: DVR/DVD For ...

  • JVC RX-D412BUJ - page 37

    Operating procedure On the front panel: Before you start, remember... There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again. Ex.: When adjusting subwoofer output level. 1 Press ADJUST. MULTI JOG now works for the sound adjustment. 2 Turn MULTI JOG until the item you want to adjust ...

  • JVC RX-D412BUJ - page 38

    Adjusting the speaker output levels • SUBWFR LVL (subwoofer output level) • FRONT L LVL (left front speaker output level) • FRONT R LVL (right front speaker output level) • CENTER LVL (center speaker output level) • SURR L LVL (left surround speaker output level) • SURR R LVL (right surround speaker output level) • S BACK LVL (surroun ...

  • JVC RX-D412BUJ - page 39

    Reinforcing the bass—BASS BOOST You can boost the bass level—Bass Boost. • Once you have made an adjustment, it is memorized for each source. • You cannot adjust directly from the remote control. B BOOST ON Select to boost the bass level. The B.BOOST indicator lights up on the display. B BOOST OFF Select to deactivate the Bass Boost. Initia ...

  • JVC RX-D412BUJ - page 40

    7 Adjusting the center channel localization for Pro Logic IIx Music and Pro Logic II Music— CENTER WIDTH This setting is available when Pro Logic IIx Music or Pro Logic II Music is activated for the analog or digital 2-channel sound signal. To activate Pro Logic IIx Music or Pro Logic II Music, see pages 43 and 44. • If “CENTER SPK” is set ...

  • JVC RX-D412BUJ - page 41

    Creating realistic sound fields Reproducing theater ambience In a movie theater, many speakers are located on the walls to reproduce impressive multi-channel sound, reaching you from all directions. With these many speakers, sound localization and sound movement can be expressed. Surround/DSP modes built in this receiver can create almost the same ...

  • JVC RX-D412BUJ - page 42

    Dolby Pro Logic IIx Dolby Pro Logic IIx is another multi-channel playback decoder to convert not only multi-channel software but 2-channel software into 7.1 channel (or 6.1 channel) that developed from Dolby Pro Logic II. The matrix-based conversion method used for Dolby Pro Logic IIx makes no limitation for the cutoff frequency of the surround tre ...

  • JVC RX-D412BUJ - page 43

    Introducing the DSP modes The sound heard in a concert hall, club, etc. consists of direct sound and indirect sound—early reflections and reflections from behind. Direct sounds reach the listener directly without any reflection. On the other hand, indirect sounds are delayed by the distances of the ceiling and walls. These direct sounds and indir ...

  • JVC RX-D412BUJ - page 44

    Using the Surround/DSP modes Available Surround/DSP modes vary depending on the speaker settings and the incoming signals. See the table below. • The numbers inside the parentheses following the incoming signal type indicate the number of the front channels and that of the surround channels. For example, (3/2) indicates that the signals are encod ...

  • JVC RX-D412BUJ - page 45

    Activating the Surround/DSP modes Available Surround/DSP modes vary depending on the speaker settings and the incoming signals. For details about the Surround modes, see page 42. Activating one of the Surround/DSP modes automatically recalls the memorized settings and adjustments. • To adjust the speaker output level, see page 36. • When activa ...

  • JVC RX-D412BUJ - page 46

    7 Selecting the Surround/DSP modes From the remote control: 1 Select and play any source. • Surround/DSP modes are not available when multi- channel PCM (see page 41) signals recorded in DVD- Audio are coming in. See page 11 for details. • Make sure you have selected the audio input setting (analog or digital) correctly (see page 21). 2 Press S ...

  • JVC RX-D412BUJ - page 47

    NOTES • When connecting the receiver and a TV with the AV COMPU LINK EX terminal by using a component video cable, you cannot use Automatic selection of TV input mode (see page 46). • When connecting only the VCR or DVD player to this receiver, connect it directly to the receiver using a cable with the monaural mini-plugs. • You can connect o ...

  • JVC RX-D412BUJ - page 48

    7 Connecting procedure 1 If you have already plugged your VCR, DVD player, TV, and this receiver into the AC outlets, unplug their AC power cords first. 2 Connect your VCR, DVD player, TV, and this receiver, using the cables with the monaural mini-plugs (not supplied). • See “Connections 1” on the previous page. 3 Connect the audio input/outp ...

  • JVC RX-D412BUJ - page 49

    Operating other JVC products You can use the supplied remote control to operate not only this receiver but also other JVC products. • Refer also to the manuals supplied with the other products. – Some JVC VCRs can accept two types of the control signals—remote codes “A” and “B.” This remote control can operate a VCR whose remote contr ...

  • JVC RX-D412BUJ - page 50

    7 DVD recorder or DVD player After setting the mode selector correctly, you can perform the following operations on the DVD recorder or DVD player. See the manual supplied with the DVD recorder or DVD player for details. To change the remote control code for DVD recorder Some JVC DVD recorders can accept four types of control signals. You can assig ...

  • JVC RX-D412BUJ - page 51

    Operating other manufacturers’ products By changing the transmittable signals, you can use the supplied remote control to operate other manufacturers’ products. • Refer also to the manuals supplied with the other products. • To operate those components with the remote control, first you need to set the manufacturer codes each for the TV, VC ...

  • JVC RX-D412BUJ - page 52

    To change the transmittable signals for operating a VCR 1 Press and hold VCR . • Keep the button pressed until step 3 is finished. 2 Press VCR. 3 Enter the manufacturer code using the numeric buttons (1 – 9, 0). See “Manufacturer codes for VCR” on the right. 4 Release VCR . Now, you can perform the following operation on the VCR: VCR : Turn ...

  • JVC RX-D412BUJ - page 53

    To change the transmittable signals for operating a CATV converter or DBS tuner 1 Press and hold DBS/CATV . • Keep the button pressed until step 3 is finished. 2 Press DBS. 3 Enter the manufacturer code using the numeric buttons (1 – 9, 0). See “Manufacturer codes for CATV converter” or “Manufacturer codes for DBS tuner” below. 4 Releas ...

  • JVC RX-D412BUJ - page 54

    Troubleshooting Use this chart to help you solve daily operational problems. If there are any problems you cannot solve, contact your JVC service center. For Precise Surround Setup and XM Satellite Radio operations, see the separated troubleshooting on pages 19 and 28. PROBLEM POSSIBLE CAUSE SOLUTION Power The power does not come on. The power cord ...

  • JVC RX-D412BUJ - page 55

    PROBLEM POSSIBLE CAUSE SOLUTION Remote control The remote control does not operate as you intend. The remote control is not ready for your intended operation. Set the mode selector correctly, then press the corresponding source selecting button before operation. The remote control does not work. There is an obstruction blocking the remote sensor on ...

  • JVC RX-D412BUJ - page 56

    Specifications 7 Amplifier Output Power At stereo operation: Front channels: 110 W per channel, min. RMS, driven into 6 Ω at 1 kHz with no more than 0.8% total harmonic distortion. At surround operation: Front channels: 110 W per channel, min. RMS, driven into 6 Ω at 1 kHz with no more than 0.8% total harmonic distortion. Center channel: 110 W, ...

  • JVC RX-D412BUJ - page 57

    7 HDMI HDMI Input (Ver. 1.1): VCR(DBS), DVR/DVD HDMI Output (Ver. 1.0): MONITOR OUT 7 FM tuner (IHF) Tuning Range: 87.5 MHz to 108.0 MHz Usable Sensitivity: Monaural: 12.8 dBf (1.2 μV/75 Ω ) 50 dB Quieting Sensitivity: Monaural: 16.0 dBf (1.7 μV/75 Ω ) Stereo: 37.5 dBf (20.5 μV/75 Ω ) Stereo Separation at OUT (REC): 35 dB at 1 kHz 7 AM tun ...

  • JVC RX-D412BUJ - page 58

    0706R YMMDWJEIN EN © 2006 Victor Company of Japan, Limited A UDIO/VIDEO CONTROL RECEIVER RX-D412B Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada, and U.K.) CAUTION for mains (AC) line BEFORE PLUGGING IN, do check that your mains (AC) line voltage corresponds with the position of the voltage selector switch provided on the o ...

Manufacturer JVC Category Stereo Receiver

Documents that we receive from a manufacturer of a JVC RX-D412BUJ can be divided into several groups. They are, among others:
- JVC technical drawings
- RX-D412BUJ manuals
- JVC product data sheets
- information booklets
- or energy labels JVC RX-D412BUJ
All of them are important, but the most important information from the point of view of use of the device are in the user manual JVC RX-D412BUJ.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals JVC RX-D412BUJ, service manual, brief instructions and user manuals JVC RX-D412BUJ. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product JVC RX-D412BUJ.

Similar manuals

A complete manual for the device JVC RX-D412BUJ, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use JVC RX-D412BUJ by users. Manuals are usually written by a technical writer, but in a language understandable to all users of JVC RX-D412BUJ.

A complete JVC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual JVC RX-D412BUJ - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the JVC RX-D412BUJ, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the JVC RX-D412BUJ, that we can find in the current document
3. Tips how to use the basic functions of the device JVC RX-D412BUJ - which should help us in our first steps of using JVC RX-D412BUJ
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with JVC RX-D412BUJ
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of JVC RX-D412BUJ in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning JVC RX-D412BUJ?

Use the form below

If you did not solve your problem by using a manual JVC RX-D412BUJ, ask a question using the form below. If a user had a similar problem with JVC RX-D412BUJ it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)