Manual Xantech RP41AV

6 pages 0.22 mb
Download

Go to site of 6

Summary
  • Xantech RP41AV - page 1

     1 Amplifiers & Preamplifiers INST ALLA TION INSTRUCTIONS GENERAL INFORMATION The RP41AV, Fig. 1, is a fully functional infrared remote controlled audio/video preamp. Volume, Bass, Treble, Balance and Mute functions, in addition to A/V input switching, provide all the functions needed for multi-room systems. It features a low noise, low dist ...

  • Xantech RP41AV - page 2

     2 4. G S terminals. Input terminals for the IR control signal. Connect a 2-conductor cable from the emitter or signal output port of any Xantech Connecting Block, IR receiver, Key Pad, or Controller here. The positive lead connects to "S" and the negative to "G". 5. IR CONFIRM LED. Lights when power is applied and flashes wh ...

  • Xantech RP41AV - page 3

     3 Amplifiers & Preamplifiers RP41AV 15. Treble & Bass "N-Flat" buttons. These buttons, when pressed (identified by a "—" mark), will instantly return the treble and bass to their electrical flat settings from any previously adjusted values. 17. Code Group Numbers. If more than one RP41AV is used in an IR controlled ...

  • Xantech RP41AV - page 4

     4 RP41AV A MULTI-ZONE SYSTEM The following diagram illustrates a typical Multi-Zone system, using the RP41AV. 1. For simplicity, only 4 zones are shown ... many more could be added using the Xantech 796-20 Zone Expander and more RP41AV's. 2. Using an RP41AV plus a basic power amplifier for each zone, every room in the house can have indivi ...

  • Xantech RP41AV - page 5

     5 Amplifiers & Preamplifiers 6-26-00 Gain (@ max VC): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unity Input Overload: . . . . . . . . . . . . . . . . . . 4.5 V RMS (@ max VC) Input Impedance: . . . . . . . . . . . . . . . . . > 40 k Ohms (ea. input) Output Impedance: . . . . . . . . . . . . . . . . . . . . . . . . 470 ...

  • Xantech RP41AV - page 6

     1 Emitters & Blasters INST ALLA TION INSTRUCTIONS DESCRIPTION The 283M Blink-IR Mouse Emitter contains a small Infrared LED housed in a miniature, mouse shaped, black appearing, injection molded plastic shell. Unlike other emitters, the 283M emits visible red light in addition to IR (infrared) control signals when activated by IR commands s ...

Manufacturer Xantech Category Stereo Amplifier

Documents that we receive from a manufacturer of a Xantech RP41AV can be divided into several groups. They are, among others:
- Xantech technical drawings
- RP41AV manuals
- Xantech product data sheets
- information booklets
- or energy labels Xantech RP41AV
All of them are important, but the most important information from the point of view of use of the device are in the user manual Xantech RP41AV.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Xantech RP41AV, service manual, brief instructions and user manuals Xantech RP41AV. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Xantech RP41AV.

Similar manuals

A complete manual for the device Xantech RP41AV, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Xantech RP41AV by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Xantech RP41AV.

A complete Xantech manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Xantech RP41AV - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Xantech RP41AV, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Xantech RP41AV, that we can find in the current document
3. Tips how to use the basic functions of the device Xantech RP41AV - which should help us in our first steps of using Xantech RP41AV
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Xantech RP41AV
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Xantech RP41AV in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Xantech RP41AV?

Use the form below

If you did not solve your problem by using a manual Xantech RP41AV, ask a question using the form below. If a user had a similar problem with Xantech RP41AV it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)