Manual Vector VEC118S

10 pages 0.26 mb
Download

Go to site of 10

Summary
  • Vector VEC118S - page 1

    VEC118S THIS MANUAL CONT AINS IMPORT ANT INFORMA TION REGARDING SAFETY , OPERA TION, MAINTENANCE AND STORAGE OF THIS PRODUCT . BEFORE USING, READ AND UNDERST AND ALL CAUTIONS, W ARNINGS, INSTRUCTIONS AND PRODUCT LABELS, PLUS YOUR VEHICLE'S BA TTERY MANUF ACTURER GUIDELINES. F AILURE TO DO SO COULD RESUL T IN INJUR Y AND/OR PROPERTY DAMAGE. OWN ...

  • Vector VEC118S - page 2

    2 IMPOR T ANT SAFETY INSTRUCTIONS W ARNINGS : Contains non-spillable, sealed, lead acid battery . Must be recycled or disposed of properly . DO NOT dispose of batteries in fire, as this may result in an explosion. DO NOT open batter y or short circuit, as this may cause the bat- ter y to leak or get hot, causing personal injur y . Any disposal ques ...

  • Vector VEC118S - page 3

    3 1. INTRODUCTION Congratulations on purchasing V ectorLite TM Model VEC118S, an advanced design combination spotlight and long lasting, soft incandescent area light. It uses two powerful proven-technology rechargeable, non-spillable, sealed, lead acid batteries that allow for years of dependable use, recharge after recharge. It was designed from t ...

  • Vector VEC118S - page 4

    3. OPERA TION The trigger switch is squeezed to turn on the spotlight. This provides momentar y operation. The trigger switch may be locked in the ON position to provide continuous light without continuously squeezing the trigger switch. T o lock the trigger switch ON, move the trigger lock to the up position. After use, move the trigger lock down ...

  • Vector VEC118S - page 5

    5 4. CHARGING THE VECTORLITE USING AC RECHARGE ADAPTER 1. Locate the recharge port on the side of the spotlight (see figure 1). 2. Connect the charger to an appropriate AC power source. 3. Plug the charger's barrel connecter into the recharge por t located near the handle. Note that the red LED lights to indicate that the batter y is charging. ...

  • Vector VEC118S - page 6

    5. PERIODIC MAINTENANCE All batteries lose charge over time, especially when they are warm. AC recharge is recommended ever y two months, when not in frequent use. Use the AC recharger and charge for the recommended time. If the unit has dirt on it, gently clean the outer surfaces of the spotlight unit with a soft cloth moistened with a mild soluti ...

  • Vector VEC118S - page 7

    10. Insert the replacement bulb into the reflector's flange. 11. Put back and secure the hairpin retaining wires. 12. Connect the white bulb power wire to the red power wire. 13. T ighten the retaining screw on the flange. 14. Place the reflector in position in the body of the spotlight. 15. Replace the rubber "O" ring in the groove ...

  • Vector VEC118S - page 8

    8 REPLACING THE BA TTERIES The rechargeable, sealed, lead acid batteries have a life of several years, if recharged promptly after each use. When the fully charged batteries only provide about 10 minutes or less of spotlight operation, they should be replaced with new batteries. T o replace the batteries, you will need the Phillips type screwdriver ...

  • Vector VEC118S - page 9

    9 W ARNINGS: DO NOT ALLOW BARE WIRES OR CONNECTORS TO CON- T ACT EACH OTHER DANGEROUS SP ARKING CAN OCCUR - NOTE WHICH WIRES ARE ON THE BA TTERY TERMINALS 6. Note position of batter y . Note which wire is on which terminal. 7. Disconnect the wires from the batter y and set the batter y aside. 8. Connect the replacement batter y , making sure the co ...

  • Vector VEC118S - page 10

    © 2002 VECTOR MANUF ACTURING, Ltd. FT . LAUDERDALE, FL 33312 MADE IN CHINA TWO YEAR LIMITED W ARRANTY PROGRAM This limited warranty program is the only one that applies to this product, and it sets forth all the responsibilities of V ector Manufacturing, Ltd., regarding this product. There is no other warranty , other than those described herein. ...

Manufacturer Vector Category Work Light

Documents that we receive from a manufacturer of a Vector VEC118S can be divided into several groups. They are, among others:
- Vector technical drawings
- VEC118S manuals
- Vector product data sheets
- information booklets
- or energy labels Vector VEC118S
All of them are important, but the most important information from the point of view of use of the device are in the user manual Vector VEC118S.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Vector VEC118S, service manual, brief instructions and user manuals Vector VEC118S. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Vector VEC118S.

Similar manuals

A complete manual for the device Vector VEC118S, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Vector VEC118S by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Vector VEC118S.

A complete Vector manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Vector VEC118S - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Vector VEC118S, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Vector VEC118S, that we can find in the current document
3. Tips how to use the basic functions of the device Vector VEC118S - which should help us in our first steps of using Vector VEC118S
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Vector VEC118S
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Vector VEC118S in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Vector VEC118S?

Use the form below

If you did not solve your problem by using a manual Vector VEC118S, ask a question using the form below. If a user had a similar problem with Vector VEC118S it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)