English dropdown-ico

Manual Xerox 5230

28 pages 0.39 mb
Download

Go to site of 28

Summary
  • Xerox 5230 - page 1

    Xerox Multifunction Devices Customer Tips PDL Reference Guide for the WorkCentre 5222/5225/5230 dc08cc0440 October 23, 2008 …for the use r Accessing Extended Features Overview This document enables you to access the extended features of the WorkCentre 5222/5225/5230 in environ ments that do not have a custom print driver. This document applies to ...

  • Xerox 5230 - page 2

    Using this Guide  Search the Feature Table to determine whethe r the feature you wi sh to use is supported.  Verify that the feature is supported by the platfo rm. For example, the WorkCentre must have an option al finisher installed to use stapling comma nds.  Follow across the table to find the syntax lis ted for the PDL exampl es shown. ...

  • Xerox 5230 - page 3

    PCL/PJL Implementation The following table contain s the PCL fea t ure co mmands and shows the syntax require d to use the feature. After the table are examples of how to use the se co mmands and examples of a PCL file. Feature Implementation Values Job Name @PJL SET JOBNAME = " jobname-string " Where jobnam e-string is a maximum of 32 ch ...

  • Xerox 5230 - page 4

    Feature Implementation Values Media Size @PJL SET PAPER = value Where value is one of the following: A3: A3 (297 x 420mm) A4: A4 (210 x 297mm) A5: A5 (180 x 210mm) JISB4: B4 (257 x 364mm) JISB5: B5 (182 x 257mm) STATEMENT: Statement (5.5 x 8.5”) † EXECUTIVE: Executive (7.25 x 10.5”) LETTER: Letter (8.5 x 11”) JISEXEC: 8.5 x 13” LEGAL: Leg ...

  • Xerox 5230 - page 5

    Feature Implementation Values <ESC>&l int A Where int is one of the following: 27: A3 (297 x 420mm) 26: A4 (210 x 297mm) 25: A5 (180 x 210mm) 46: B4 (257 x 364mm) 45: B5 (182 x 257mm) 41: Statement (5.5 x 8.5”) † 1: Executive (7.25 x 10.5”) 2: Letter (8.5 x 11”) 18: 8.5 x 13” 3: Legal (8.5 x 14”) 6: Tabloid (11 x 17”) 81: No ...

  • Xerox 5230 - page 6

    Feature Implementation Values <ESC>&l int H Where int is one of the following: 0 : Feed paper from default tray 4 : Tray1 1 : Tray2 5 : Tray3 8 : Tray4 7 or 20 = Auto 2 or 3 or 6 = Tray5 (Bypass) 21 : Tray6 Output Location @PJL SET OUTBIN = value Where value is one of the following: UPPER : Center output tray (w/o finisher) MAINTRAY : Cen ...

  • Xerox 5230 - page 7

    Feature Implementation Values Booklet @PJL SET JOBATTR = “@BKLT = value1 ” @PJL SET JOBATTR = “@BKSG = value2 ” @PJL SET JOBATTR = “@BKDN = int1 ” Where value1 is one of the followin g: NONEDIVIDE: Compile a booklet as long as the number of sheet does not excee d the limit MANUALDIVIDE: Divide sheets based on the specified limit manuall ...

  • Xerox 5230 - page 8

    Feature Implementation Values <ESC>&l int O Where int is one of the following: 0: Portrait 1: Landscape 2: Reverse Portrait 3: Reverse Landscape Force short edge feeding @PJL SET PAPERDIRECTION = value Where value i s one of the followin g: SEF: Short Edge Feed LEF: Long Edge Feed Job Mode @PJL JOB MODE = value Where value is one of the f ...

  • Xerox 5230 - page 9

    Feature Implementation Values Banner Sheet @PJL SET JOBATTR= "@BANR= value " @PJL SET JOBATTR= "@BCMT= comment string " Where value is one of the following: ST ART : start sheet DEVICE: depend on device setting OFF: no banner sheet Where string is a maximu m of 255 characters (ASCII characters in the range 20h - 7E h are allowed ...

  • Xerox 5230 - page 10

    Example 3 Finishing Options (Punch) <ESC>%-12345X@PJL JOB MODE=PRINTER<CR><LF> @PJL SET OUTBIN=OUTPIN101<CR><LF> @PJL SET FINISH=ON<CR><LF> @PJL SET PUNCH=LEFT<CR><LF> @PJL SET JOBATTR="@PNHN=TWO"<CR><LF> Example 4 Finishing Options (S addle stapling an d folding) It is an ...

  • Xerox 5230 - page 11

    Example 8 Confidential (Secu re) Print without encryption Password : 1234 <ESC>%-12345X@PJL JOB MODE=PRINTER<CR><LF> @PJL SET HOLD=STORE <CR><LF> @PJL SET HOLDKEY="1234"<CR><LF> @PJL SET USERNAME="John" <CR><LF> @PJL SET JOBNAME="Job1" <CR><LF> Example 9 ...

  • Xerox 5230 - page 12

    PCL/PJL Feature Dependencies/Caveats  All PJL commands must be in t he first 2,500 bytes of the job.  To combine printer escape comm ands (not including PJL comma nd s): The first two characters afte r the <esc> MUST be the s ame. All alpha characters MUST be lowercase, except the final terminatin g character. The commands are read left ...

  • Xerox 5230 - page 13

    dc08cc0440 Font Name PCL Escape Command Courier <esc>(<esc>(s1p 12v0s0b4099T Courier Bold <esc>(<esc>(s1p12v0s3b 4 099T Courier Italic <esc>(<esc>(s1p12v1s0b 4 099T Courier Bold Italic <esc>(<esc>(s1p12v1s3b 4 099T Garamond Antiqua <esc>(<esc>(s1p12v0s0b 4 197T Garamond Halbfett <esc> ...

  • Xerox 5230 - page 14

    Font Name PCL Escape Command ITC Bookman Light <esc>(<esc>(s1p12v0 s-3b24623T ITC Bookman Light Italic <esc>(<esc>(s1p12v1s-3b24623T ITC Bookman Demi <esc>(<esc>(s1p12v0s2b 24623T ITC Bookman Demi Italic <esc>(<esc>(s1p12v1s2b 24623T Helvetica Narrow <esc>(<esc>(s1p12v4s0b 24580T Helvetica ...

  • Xerox 5230 - page 15

    dc08cc0440 Customer Support Page 15 PostScript This WorkCe ntre support s PS 3 commands that enable the features listed in the followin g table. Feature Description Media Size This command specifies the size of media on whi ch to print the job. Media Direction This command spec ifie s the edge of the input medium that will enter the printing engine ...

  • Xerox 5230 - page 16

    dc08cc0440 Customer Support Page 16 Feature Description Stapling This command indicates use and lo cation of staple(s). Punch This command indicates hole pun ch es for a print job on a device with hole punch capability. Booklet This comman d enables you to print documents as small booklets. If available on your printer, you can also h ave your job ...

  • Xerox 5230 - page 17

    dc08cc0440 Customer Support Page 17 PostScript Implementation The following table contains the PostScript command s and shows the syntax requ ired to use the feature. Following the table are examples of com mands and a PS file. For more details about PostScri pt commands, refer to the PostScript Language Refere nce Manual, Third Edition , ISBN 0-20 ...

  • Xerox 5230 - page 18

    dc08cc0440 Customer Support Page 18 Feature Implementation Values Media Direction <</LeadingE dge int >> setpagedevice Where int is one of the following: 0 = Short Edge; top of canonical page 1 = Long Edge; right side of canoni cal page 2 = Short Edge; bottom of canonical page 3 = Long Edge; left side of canoni cal page null* = Auto Med ...

  • Xerox 5230 - page 19

    dc08cc0440 Customer Support Page 19 Feature Implementation Values Media Class <</MediaClass ( st ring )>> setpagedevice Where string is one of the followin g or null*: stationary = Plain used = Plain Reload recycled = Recycled transparency = Transparencies thin = Light weight (56-63g/m2) label = Labels thick1 = Heavyweight 1 (106-169g/m ...

  • Xerox 5230 - page 20

    dc08cc0440 Customer Support Page 20 Feature Implementation Values Image Enhancement <</PostRenderingEnhance true /PostRenderingEnhanceDetails << /Type 32 /REValue int >> >> setpagedevice Where int is one of the following: 0 = No image enhancem en t 1* = Activate image enhancement Toner Save <</PostRenderingEnhance true ...

  • Xerox 5230 - page 21

    dc08cc0440 Customer Support Page 21 Feature Implementation Values Stapling (w/ finisher) <</Staple int1 /StapleDetails << /Type 7 /Location int2 >> >> setpagedevice Where int1 is one of the following: 0* = Do not staple 3 = Staple at the end of each set Where int2 is one of the following: 0* = top-left-single 1 = bottom-left ...

  • Xerox 5230 - page 22

    dc08cc0440 Customer Support Page 22 Feature Implementation Values Interleaving Paper (Transparency Separator) <</SlipSheet int1 /SlipSheetDetails << /Type 1 /AutoTraySelect int2 /SheetTray int3 /MediaClass ( string ) >> >> setpagedevice Where int1 is one of the following: 0* = Do not deliver interleaving paper. 4 = Deliver i ...

  • Xerox 5230 - page 23

    dc08cc0440 Customer Support Page 23 Feature Implementation Values Separation Order <</Se parationOrder value >> setpagedevice Where value is an array. Legal element values are the pro cess colorant names implie d by the pro cess color model. Use CIE Color <</UseCIEColor value >> setpagedevice Where value is one of the follow ...

  • Xerox 5230 - page 24

    dc08cc0440 Customer Support Page 24 Sample PostScript Headers Example 1 Header for Simple Print %!PS Example 2 Header for Finishing (Letter paper , duplex, 10 copies with collation, st apling with lef t-upper single and finisher tray for output bin) %!PS << /DeferredMediaSelection true >> setpagedevice <</PageSize [612 792]>> ...

  • Xerox 5230 - page 25

    dc08cc0440 Customer Support Page 25 PostScript Fonts The following PostScript fonts are re sident with Adobe interpreter. Font Name PostScript Font Name Albertus /AlbertusMT Albertus Italic /AlbertusMT-Italic Albertus Light /AlbertusMT-Light Antique Olive Roman /AntiqueOlive-Roman Antique Olive Italic /AntiqueOlive-Italic Antique Olive Bold /Antiqu ...

  • Xerox 5230 - page 26

    dc08cc0440 Customer Support Page 26 Font Name PostScript Font Name Gill Sans /GillSans Gill Sans Italic /GillSans-Italic Gill Sans Bold /GillSans-Bold Gill Sans Bold Italic /GillSans-BoldItalic Gill Sans Light /GillSans-Light Gill Sans Light Italic /GillSans-LightItalic Gill Sans Extra Bold /GillSans-ExtraBold Gill Sans Condensed /GillSans-Condense ...

  • Xerox 5230 - page 27

    dc08cc0440 Customer Support Page 27 Font Name PostScript Font Name New Century Schoolboo k Bold /NewCenturySchlb k-Bol d New Century Schoolboo k Bold Italic /NewCenturySchlb k-Bol dItalic NewYork /NewYork OCR-B Letterpress M /OCRB LetM Optima Roman /Optima Optima Italic /Optima-Italic Optima Bold /Optima-Bold Optima Bold Italic /Optima-BoldItalic O ...

  • Xerox 5230 - page 28

    Additional Information Xerox Customer Support wel comes feedback on all documentation - send feedback via e-m ail to: USA.DSSC.Doc.Feedba ck@mc.usa.xerox.com . You can reach Xerox Cust omer Support at 1-800-821 -2797 (USA), TTY 1-800-855-2880 or at http://www.xerox.com . Other Tips about Xerox multifunction device s are available at the following U ...

Manufacturer Xerox Category Printer

Documents that we receive from a manufacturer of a Xerox 5230 can be divided into several groups. They are, among others:
- Xerox technical drawings
- 5230 manuals
- Xerox product data sheets
- information booklets
- or energy labels Xerox 5230
All of them are important, but the most important information from the point of view of use of the device are in the user manual Xerox 5230.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Xerox 5230, service manual, brief instructions and user manuals Xerox 5230. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Xerox 5230.

Similar manuals

A complete manual for the device Xerox 5230, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Xerox 5230 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Xerox 5230.

A complete Xerox manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Xerox 5230 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Xerox 5230, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Xerox 5230, that we can find in the current document
3. Tips how to use the basic functions of the device Xerox 5230 - which should help us in our first steps of using Xerox 5230
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Xerox 5230
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Xerox 5230 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Xerox 5230?

Use the form below

If you did not solve your problem by using a manual Xerox 5230, ask a question using the form below. If a user had a similar problem with Xerox 5230 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)