English dropdown-ico

Manual Canon 2921B002

73 pages 11.16 mb
Download

Go to site of 73

Summary
  • Canon 2921B002 - page 1

    Make sure to read this manual b efore using the machine. Please keep it in hand for future refer ence. MP620 Getting Started =Read Me First= series Photo All-In- One ...

  • Canon 2921B002 - page 2

    Symbols ■ The following symbols are used to mark important instructions. Observe these instructions. Instructions that, if ignored, could result in personal injury or material damage. Instructions that must be observed for safe operation. Additional explanations. Descriptions for operations that take some time to complete. Model Number: K10325(MP ...

  • Canon 2921B002 - page 3

    1 Contents Check the Included Items T urn the Power On Install the Print Head Install the Ink T anks Setup the Machine and the Computer Loading Paper Conrming the Setup Flow After Installing the Machine ...

  • Canon 2921B002 - page 4

    2 (A) 1 Manuals Setup CD-ROM (containing the drivers, applications and on-screen manuals) W arranty • • • Check the Included Items Before turning on the machine, remove all the orange tapes and the protective sheets. • Open the Paper Output T ray with your hands, and take out the Print Head. The Print Head is placed inside of the Paper Outp ...

  • Canon 2921B002 - page 5

    3 (A) (B) (C) (D) (1) (2) 2 2 3 1 T urn the Power On Do NOT connect the USB cable at this stage. • Plug in the power cord on the left side at the back of the machine and connect the other end to the wall outlet. Open the Operation Panel (A), then press the ON button (B) to turn on the machine. Make sure that the Document Cover (C) is closed. If a ...

  • Canon 2921B002 - page 6

    4 (E) (A) (B) (C) (D) 3 1 2 Install the Print Head Close the Document Cover (D) and lift it with the Scanning Unit (Cover). • Firmly raise the Print Head Lock Lever until it stops. (The Print Head Lock Lever may feel heavy .) • If the Print Head Holder does not move, make sure that the machine is turned on. • Open the Paper Output T ray (A), ...

  • Canon 2921B002 - page 7

    5 (E) 5 4 3 Remove the Print Head from the silver package. Remove and discard the orange protective cap. T ilt the Print Head and set it in place. Lower the Print Head Lock Lever (E) completely . There may be some transparent or light blue ink on the inside of the bag the Print Head comes in, or the inside of the protective cap - this has no effect ...

  • Canon 2921B002 - page 8

    6 (A) (1) (2) 4 1 2 Install the Ink T anks Do not hold the sides of the ink tank; ink may splash. • Pull the orange tape (1) in the direction of the arrow to peel off the protective film and remove the film (2) completely . If the Print Head Holder moves to the right, close and reopen the Scanning Unit (Cover). Be sure to use the supplied ink tan ...

  • Canon 2921B002 - page 9

    7 (B) 4 5 3 W ait until the screen above appears (about 4 minutes) and go to the next step. The machine may make some operating noises when preparing to print. This is normal operation. • • If an error message is displayed on the LCD, make sure that the Print Head and the ink tanks are correctly installed. • Install all the other ink tanks in ...

  • Canon 2921B002 - page 10

    8 (C) 4 7 6 Press the OK button. For details, refer to "21 Loading Paper" on page 56. Close the Paper Output T ray to make it easier to pull out the Cassette. • • For better print results, it is recommended that you align the Print Head before printing photos. T o align the Print Head, use the { or } button to select Perform head alig ...

  • Canon 2921B002 - page 11

    9 5 Confirming the Setup Flow Confirming Y our Connection T ype ■ Before starting setup, decide on the most suitable connection method for the machine. This machine can be used over a wireless or wired LAN, as well as via USB connection. Wireless LAN USB Wired LAN Before connecting the machine to the network, conrm that conguration of the c ...

  • Canon 2921B002 - page 12

    10 5 Quit all running applications before installation. Log into a user account with the administrator privilege. Do not switch user accounts during installation. It may be necessary to restart your computer during the installation process. Follow the on-screen instructions and click OK , and do not remove the Setup CD- ROM during restarting. The i ...

  • Canon 2921B002 - page 13

    11 A B C G H I J K D E F Which connection method do you intend to use? USB Setup Flow ■ P .1 3 P .1 6 P .2 9 P .3 2 P .3 7 P .1 2 P .1 3 P .1 7 P .2 9 P .1 2 P .3 2 P .3 8 P .4 5 P .1 2 P .1 3 P .2 9 P .2 1 P .1 2 P .3 2 P .4 5 P .4 0 P .5 1 P .1 3 P .2 9 P .4 8 P .1 3 P .2 6 P .2 9 P .4 8 P .3 2 P .4 4 P .4 5 P .1 3 P .2 6 P .2 9 P .3 2 P .4 4 P ...

  • Canon 2921B002 - page 14

    12 6 1 3 4 5 2 D F C E (A) Use the Easy-Scroll Wheel (A) or the [ or ] button to select Settings , then press the OK button. Select Device settings , then press the OK button. Select LAN settings , then press the OK button. Select Change wireless/wired , then press the OK button. Select either to the connection method, then press the OK button. Set ...

  • Canon 2921B002 - page 15

    13 1 2 A C G I J E 7 1 2 3 Click Cancel to quit the screen. Proceed from . Remove the USB cable connected to your computer . (A) The screen may close. In this case, proceed from . Install the Software Setup the Machine and the Computer Windows T urn on the computer , then insert the Se tu p C D- RO M in to t he CD -R OM d ri ve . Operating noise co ...

  • Canon 2921B002 - page 16

    14 3 4 5 C A E G I J 7 Windows Vista Windows Vista AutoPlay screen appears, click Run Msetup4.exe . User Account Control screen appears, click Continue . If the same screen reappears in subsequent steps, click Continue . Click Easy Install . The drivers, application software, and on-screen manuals are installed automatically . If you want to select ...

  • Canon 2921B002 - page 17

    15 7 A C G I J E 6 Windows Read the License Agreement screen carefully and click Y es . Installation starts. Follow any on-screen instructions to install the software. • Click Install . Move the cursor over items to display explanations. USB Wired LAN P .2 6 Wireless LAN Additional Computer P .1 6 P .1 7 P .2 1 P .2 6 P .2 6 Go to either of the f ...

  • Canon 2921B002 - page 18

    16 USB 1 2 A 8 Windows When the Printer Connection screen appears, connect the machine to the computer with a USB cable, then turn on the machine. USB Connection Setup the Machine and the Computer Next, read "12 Information" on page 29! When the machine is recognized by the computer , a message appears on the screen. If you cannot go to t ...

  • Canon 2921B002 - page 19

    17 1 2 C 9 First-time Setup for Use over Wired LAN Setup the Machine and the Computer Set the machine's LAN setting to Wired LAN active beforehand. For details, refer to “6 Machine's LAN Setting” on page 12. • When a confirmation screen for the machine's LAN setting appears, click OK . Windows Confirm that USB Cable and LAN Cab ...

  • Canon 2921B002 - page 20

    18 USB 3 C 4 9 When the Printer Connection screen appears, connect the machine to the computer with a USB cable, then turn on the machine. Set up the machine over a USB connection until the network connection is complete. When the Setup Preparations dialog box appears, confirm that preparation is complete, then click Next . The machine is recognize ...

  • Canon 2921B002 - page 21

    19 (A) USB 5 C 6 Connect the machine to the network device with a LAN cable (A), then click Y es . Windows Windows Vista Windows XP/2000 Detect the Machine If no connection is established even after Connect is clicked, refer to "5.6 The Set Printer IP Address dialog box is displayed during setup" in the printed manual: Network Setup T rou ...

  • Canon 2921B002 - page 22

    20 USB 7 C 9 8 Windows Windows XP/2000 When the Network Setup of the Card Slot dialog box appears, specify the drive letter , then click Next . If the error message appears, refer to "5 The following screen is displayed during setup" in the printed manual: Network Setup T roubleshooting . • When the Setup Completion dialog box appears, ...

  • Canon 2921B002 - page 23

    21 USB 2 1 E 10 On the Setup Method screen, select Connect printer to the network for the first time , then click Next . Set the machine's LAN setting to Wireless LAN active beforehand. For details, refer to “6 Machine's LAN Setting” on page 12. • When a confirmation screen for the machine's LAN setting appears, click OK . Firs ...

  • Canon 2921B002 - page 24

    22 3 4 E 10 When the Setup Preparations dialog box appears, confirm that preparation is complete, then click Next . Detect Access Point When the Access Points screen appears, select an access point to use, then click Connect . When an access point is detected automatically , the Access Points screen does not appear . Go to step . T o connect to the ...

  • Canon 2921B002 - page 25

    23 5 6 E Windows If no connection is established even after Connect is clicked, refer to "5.6 The Set Printer IP Address dialog box is displayed during setup" in the printed manual: Network Setup T roubleshooting . • When the Set Printer IP Address screen appears, click Connect . If the machine is detected automatically , the Set Printe ...

  • Canon 2921B002 - page 26

    24 USB 7 8 E 10 When the Setup Completion dialog box appears, remove the USB cable, then click Next . T o change the port name, click View Setup Results , then click Set Port Name . Fo r det ai ls , refer to "8 Changing the port name" in the printed manual: Network Setup T roubleshooting . If Unsafe Removal of Device is displayed, click O ...

  • Canon 2921B002 - page 27

    25 9 1 0 E Measuring takes a few minutes. Y ou can cancel measuring by clicking Cancel. Y ou also examine the detailed status of the communication link after setup by using the Canon IJ Network T ool. For details, refer to the on-screen manual: Advanced Guide . • On the Connection Performance Measurement screen, click Next . Measuring of the comm ...

  • Canon 2921B002 - page 28

    26 (A) 2 1 G I J 11 Connect the Wired LAN / W ireless LAN Setup the Machine and the Computer Press the ON button (A) to TURN ON THE MACHINE. Make sure that the computer you are setting up is not connected to the machine with a USB cable. For wired LAN connections, conrm that the machine is connected to the network with a LAN cable. • • On th ...

  • Canon 2921B002 - page 29

    27 3 G I J Windows Some programs that switch the network environment depending on your environment will enable a rewall by default. Check the settings of any such software. • When the Printers screen appears, make sure that the machine is selected and click Next . When the machine is not detected, make sure of the following, click Update . • ...

  • Canon 2921B002 - page 30

    28 5 G I J 11 4 Windows Windows XP/2000 When the Network Setup of the Card Slot dialog box appears, specify the drive letter , then click Next . If the error message appears, refer to "5 The following screen is displayed during setup" in the printed manual: Network Setup T roubleshooting . • T o change the port name, click View Setup Re ...

  • Canon 2921B002 - page 31

    29 (A) 2 1 A C G E I J 12 Information Setup the Machine and the Computer Windows When the Load plain paper into the cassette screen appears, load plain paper in the Cassette (A) and click Next . For details, refer to "21 Loading Paper" on page 56. • Click Next . It may take a while for the next screen to appear . Click Next only once. ...

  • Canon 2921B002 - page 32

    30 Serial Number * * * * * * * 3 4 C A E G I J 12 Click Next . If connected to the Internet, the user registration page appears. Follow the on-screen instructions to register your product. Y ou will need your product serial number , which is located on the inside of the machine. T o register later , click Cancel . User Registration can be started f ...

  • Canon 2921B002 - page 33

    31 5 A C G E I J Windows Click Exit . If Restart is displayed, make sure that the Restart the system now (recommended) check box is selected, then click Restart . After restarting the computer , remove the Setup CD-ROM and keep it in a safe place. Next, read "21 Loading Paper" on page 56! ...

  • Canon 2921B002 - page 34

    32 USB 2 3 1 K H F D B 13 The USB port is located on the right side at the back of the machine. When using WPS (Wi-Fi Protected Setup) or connecting an additional computer , make sure that the machine is turned on, then go to step . It is not necessary to connect the machine to the computer with a USB cable. • • Setup the Machine and the Comput ...

  • Canon 2921B002 - page 35

    33 5 4 B H K D F Macintosh Enter your administrator name and password. Click OK . If you do not know your administrator name or password, click Help , then follow the on-screen instructions. Click Easy Install . The drivers, application software, and on-screen manuals are installed automatically . If you want to select particular items to install, ...

  • Canon 2921B002 - page 36

    34 (A) 8 K H F D B 13 7 6 Read the License Agreement screen carefully and click Y es . Installation starts. Follow any on-screen instructions to install the software. • When the Load plain paper into the cassette screen appears, load plain paper in the Cassette (A) and click Next . For details, refer to "21 Loading Paper" on page 56. ? ...

  • Canon 2921B002 - page 37

    35 Serial Number * * * * * * * 1 0 B H K D F 9 Macintosh Click Next . Click Next . If connected to the Internet, the user registration page appears. Follow the on-screen instructions to register your product. Y ou will need your product serial number , which is located on the inside of the machine. Internet connection is required. (Connection fees ...

  • Canon 2921B002 - page 38

    36 K H F D B 13 1 1 When the computer restarts, Canon IJ Network T ool starts automatically . Macintosh Click Restart . Click Restart to restart the computer . After restarting the computer , remove the Setup CD-ROM and keep it in a safe place. When using Mac OS X v .10.3.9, before using the Operation Panel on the machine to save scanned originals ...

  • Canon 2921B002 - page 39

    37 1 B 14 Setup the Machine and the Computer USB Connection Macintosh On the Canon IJ Network T ool screen, select USB connection , then click OK . Next, read "21 Loading Paper" on page 56! ...

  • Canon 2921B002 - page 40

    38 2 3 1 D 15 On the Canon IJ Network T ool screen, select LAN connection , then click OK . Set the machine's LAN setting to Wired LAN active beforehand. For details, refer to “6 Machine's LAN Setting” on page 12. • If no printer is detected, click OK . Make sure of the following, then click Update . The machine is connected to the ...

  • Canon 2921B002 - page 41

    39 USB USB (A) 4 D 5 Connect the machine to the network device with a LAN cable (A), then click Y es . When the Setup Completion dialog box appears, remove the USB cable, then click OK . The Printer Setup Utility and Canon IJ Network Scanner Selector will start up. Next, read "18 Add the Machine" on page 45! Macintosh If the Set Printer I ...

  • Canon 2921B002 - page 42

    40 2 3 1 F 16 First-time Setup for Use over Wireless LAN Setup the Machine and the Computer Set the machine's LAN setting to Wireless LAN active beforehand. For details, refer to “6 Machine's LAN Setting” on page 12. • If no machine is detected, refer to "4.1 The machine is not detected" in the printed manual: Network Setu ...

  • Canon 2921B002 - page 43

    41 Y ou can retrieve your network key by using the Canon PIXMA Wireless Setup Assistant or the instructions which can be downloaded from the Canon support webpage (www .usa.canon. com/downloadlibrary). If you are unable to retrieve the network key or other settings refer to the manual of your access point or router , or contact its manufacturer . 4 ...

  • Canon 2921B002 - page 44

    42 USB (A) 6 7 F 16 5 Press the ON button (A) T O TURN OFF THE MACHINE, then place the machine in the location where you will use it, and turn on it. Detect the Machine If no connection is established even after Connect is clicked, refer to "5.6 The Set Printer IP Address dialog box is displayed during setup" in the printed manual: Networ ...

  • Canon 2921B002 - page 45

    43 9 F 8 Macintosh If any symbol other than is displayed, refer to displayed comments and Help for improving the status of communication link. T o check whether the new location is better , click Remeasurement . Measurement of the communication status is performed again. When any message on Overall network performance appears in the measurement res ...

  • Canon 2921B002 - page 46

    44 1 2 3 4 K H 17 Macintosh If the Setup Preparations dialog box appears, confirm that preparation is complete, then click OK . When the Cancel Setup screen appears, then click Cancel . When the Y ou have no printers available. screen appears, click Cancel . • Connect the Wired LAN / W ireless LAN Setup the Machine and the Computer On the Canon I ...

  • Canon 2921B002 - page 47

    45 1 2 H K D F 18 Mac OS X v .10.5.x/v .10.4.x W ait for a while, then select Canon MP620 series and click Add . Add the Machine Setup the Machine and the Computer In Mac OS X v .10.4.x, click More Printers in t he Printer Browser screen. The alphanumeric string after Canon MP620 series is the machine's MAC address. If the machine has not been ...

  • Canon 2921B002 - page 48

    46 3 4 K H F D 18 Select Canon IJ Network in the pop-up menu, select your machine’s name in the list of printers, then click Add . The alphanumeric string after Canon MP620 series is the machine's MAC address. If the machine has not been detected, make sure of the following. • • Confirm that your MP620 series is added to the list of prin ...

  • Canon 2921B002 - page 49

    47 5 H K D F 6 On the Canon IJ Network Scanner Selector screen, select Canon MP620 series Network in TW AIN Data Source Name and the MAC address of the machine in Network Device List , then click Apply to use the machine as a scanner . T o conrm the machine's MAC address, refer to "Troubleshooting" in the on-screen manual: Advance ...

  • Canon 2921B002 - page 50

    48 (A) 2 1 G H 3 19 If your access point supports WPS (Wi-Fi Protected Setup), you can set the wireless LAN security easily . Use the Easy-Scroll Wheel (A) or the [ or ] button to select Settings , then press the OK button. Select Device settings , then press the OK button. WPS Connection Setup the Machine and the Computer Select LAN settings , the ...

  • Canon 2921B002 - page 51

    49 5 6 4 7 G H Select Wireless LAN active , then press the OK button. Select Change wireless/ wired , then press the OK button. Select Wireless LAN settings , then press the OK button. Select WPS settings , then press the OK button. Windows ／ Macintosh ...

  • Canon 2921B002 - page 52

    50 1 0 9 8 G H 19 T o use the PIN code method for setup, select PIN method on step , then press the OK button. Follow the on-screen is instructions to operate the machine and access point. When the setup is complete, the completion screen appears then the LAN settings screen returns. A timeout error occurs if setup is not completed within 10 minute ...

  • Canon 2921B002 - page 53

    51 1 2 I 20 The machine supports "WCN-UFD". • Y ou can set the wireless LAN security on the machine easily by using the WCN (Windows Connect Now) function of Windows Vista together with a USB ash drive. Canon assumes no responsibility for any damage or loss of stored data regardless of the cause. If your USB ash drive cannot be at ...

  • Canon 2921B002 - page 54

    52 5 4 I 3 20 Click Add the device or computer using a USB flash drive . From the list, select the network name (SSID), then click Next . Click I want to add a wireless device or computer that is not on the list, using a USB flash drive . If the User Account Control screen appears, click Continue . If the same screen reappears in subsequent steps, ...

  • Canon 2921B002 - page 55

    53 I 6 7 Connect the USB flash drive to the computer , confirm that the drive name is displayed, then click Next . When the above screen appears, remove the USB flash drive from the computer , then click Close . Windows ...

  • Canon 2921B002 - page 56

    54 (A) 1 0 1 1 I 9 20 8 Use the Easy-Scroll Wheel (A) or the [ or ] button to select Settings , then press the OK button. Select Device settings , then press the OK button. Select LAN settings , then press the OK button. Select Change wireless/ wired , then press the OK button. ...

  • Canon 2921B002 - page 57

    55 1 4 1 5 I 1 3 1 2 Select Wireless LAN active , then press the OK button. Select Wireless LAN settings , then press the OK button. Select WCN settings , then press the OK button. Connect the USB flash drive to the direct print port (USB connector) on the front of the machine, then press the OK button. The completion screen appears on the LCD of t ...

  • Canon 2921B002 - page 58

    56 (A) (A) (B) (C) (D) (F) (E) 1 2 3 21 This section explains how to load paper in the Cassette (A) and the Rear T ray (B). The Cassette (A) supports plain paper (C) only . T o print Photo Paper / Hagaki (D), be sure to load it in the Rear T ray (B). Load in the Cassette Move the Paper Guides (E) and (F) to both edges. Pull out the Cassette (A). Lo ...

  • Canon 2921B002 - page 59

    57 (F) (G) A4 (E) (A) 6 5 4 Insert the Cassette (A) into the machine until it clicks into place. Slide the Paper Guide (F) against left edge of the paper . Do not exceed the Load Limit Mark (G). Slide the Paper Guide (E) to align with the mark of paper size. The Paper Guide (E) will stop when it aligns with the corresponding mark of paper size. The ...

  • Canon 2921B002 - page 60

    58 (I) (I) (H) (I) (J) (I) 7 1 0 9 8 21 Load paper in the Rear T ray For details on media sizes and types you can use, refer to "Loading Paper" in the on-screen manual: Basic Guide . • Load paper in portrait orientation with the printing side facing up. • Machine installation is now complete! Open the Paper Support (H) and pull it out ...

  • Canon 2921B002 - page 61

    59 After Installing the Machine Safety Precautions Fo r p ro p er u s e, r ea d s a fe t y p re c au t io n s b ef or e u si ng th e p ro d uc t . Safety and Environment Information Manuals ■ Getting Started (this manual) D es c r ib e s h ow t o s et u p an d u se yo u r ma c hi ne . I nt ro d uc e s t h e m ac hi n e an d i t s f un c ti o ns , ...

  • Canon 2921B002 - page 62

    60 Solution Menu ■ Solution Menu is a gateway to functions and information that allow you to make full use of the machine! Open various applications and on-screen manuals with a single click. Y ou can start Solution Menu from the Solution Menu icon on the desktop (Windows) or on the Dock (Macintosh). If you have a problem with machine settings, c ...

  • Canon 2921B002 - page 63

    61 Using Y our Machine ■ Now let's use the machine! This machine allows you to print in various ways using the MP driver and application software installed on the computer . For example, you can print borderless photos, and create your own calendar etc. easily . Also, you can scan documents into a computer , and correct/enhance scanned image ...

  • Canon 2921B002 - page 64

    62 (A) (B) (C) CF SD MS MS Du o CF SD MS MS Du o CF SD MS MS Du o 1 Print images saved on a memory card used with digital cameras, etc. *Supported Memory Cards (Adapter required for .) For more information on printing from a memory card, refer to "Printing from a Memory Card" in the on-screen manual: Basic Guide . SD Card SDHC Card MultiM ...

  • Canon 2921B002 - page 65

    63 (E) (D) 2 3 Rotate the Easy-Scroll Wheel (E) to display a photo to print. Alternatively , use the [ or ] button to select a photo. For details, refer to "21 Loading Paper" on page 56. • Load a sheet of 4" x 6" size photo paper in the Rear T ray (D) in portrait orientation. ...

  • Canon 2921B002 - page 66

    64 (F) (A) (B) 6 5 4 Press the [ + ] or [ - ] button to specify the number of copies, then press the OK button. The Print Settings Confirmation Screen appears. Press the Color button (F). After printing, open the Card Slot Cover (A), pinch the memory card and pull it straight out, then close the Card Slot Cover (A). Printing will start. Do not remo ...

  • Canon 2921B002 - page 67

    65 (A) (B) (A) (E) (F) (D) (C) 2 3 1 4 T ry Copying This section explains with Plain Paper . For various copying procedures, refer to "Copying" in the on-screen manual: Basic Guide . For details, refer to "21 Loading Paper" on page 56. • Y ou can copy a document by simply placing it on the Platen Glass and pressing the Black b ...

  • Canon 2921B002 - page 68

    66 (A) 2 1 3 4 Print Photos from a Computer For opening Solution Menu, refer to "Solution Menu" on page 60. For more information refer to the on-screen manual: Advanced Guide . • • Load a sheet of photo paper in the Rear T ray (A) in portrait orientation. For details, refer to "21 Loading Paper" on page 56. • Click Print . ...

  • Canon 2921B002 - page 69

    67 (C) (A) (B) 2 1 Align the Print Head Select Y es , then press OK button. For details, refer to "21 Loading Paper" on page 56. • Use three sheets of A4 or Letter-sized plain paper for alignment. Confirm that three or more sheets of A4 or Letter-sized plain paper are loaded into the Cassette (B). Printing of the first pattern starts. M ...

  • Canon 2921B002 - page 70

    68 4 3 When the above pattern is printed, select Y es and press the OK button. Look at the first printout, and use the [ ] { } buttons to enter the number of the pattern that has the least noticeable vertical or horizontal streaks for columns A to G , then press the OK button. If it is difcult to pick the best pattern, pick the setting that prod ...

  • Canon 2921B002 - page 71

    69 6 5 Follow the same procedure as to enter the number of the pattern that has the least noticeable vertical streaks for columns H to Q , then press the OK button. Less noticeable vertical white streaks More noticeable vertical white streaks Confirm the above message, then press the OK button. Printing of the second pattern starts. ...

  • Canon 2921B002 - page 72

    70 8 9 7 Confirm that the above screen appears. Print Head Alignment is now complete. Enter the number of the pattern that has the least noticeable horizontal stripes for columns a to j , then press OK button. If it is difcu lt to pick the best pattern, p ick the setting that produces the least noticeable white stripes. • Less noticeable horiz ...

  • Canon 2921B002 - page 73

    QT5-2547-V01 XXXXXXXX ©CANON INC.2008 PRINTED IN THAILAND Email T ech Support — www .canontechsupport.com The following ink tanks are compatible with this product. Getting Help from Canon This option provides live telephone technical support, free of service charges, Monday-Friday (excluding holidays), during the warranty period. T elephone Devi ...

Manufacturer Canon Category All in One Printer

Documents that we receive from a manufacturer of a Canon 2921B002 can be divided into several groups. They are, among others:
- Canon technical drawings
- 2921B002 manuals
- Canon product data sheets
- information booklets
- or energy labels Canon 2921B002
All of them are important, but the most important information from the point of view of use of the device are in the user manual Canon 2921B002.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Canon 2921B002, service manual, brief instructions and user manuals Canon 2921B002. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Canon 2921B002.

Similar manuals

A complete manual for the device Canon 2921B002, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Canon 2921B002 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Canon 2921B002.

A complete Canon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Canon 2921B002 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Canon 2921B002, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Canon 2921B002, that we can find in the current document
3. Tips how to use the basic functions of the device Canon 2921B002 - which should help us in our first steps of using Canon 2921B002
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Canon 2921B002
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Canon 2921B002 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Canon 2921B002?

Use the form below

If you did not solve your problem by using a manual Canon 2921B002, ask a question using the form below. If a user had a similar problem with Canon 2921B002 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)