Manual White Rodgers 1F86ST-0471

8 pages 1.2 mb
Download

Go to site of 8

Summary
  • White Rodgers 1F86ST-0471 - page 1

    Description Gas or Oil Heat Y es Electric Fur nace Y es Heat Pump (No Aux. or Emergency Heat) Y es Heat Pump (with Aux. or Emergency Heat) No Systems with up to 3 Stages Heat, 2 Stages Cool No Heat Only Systems Y es Millivolt Heat Only Systems – Floor or Wall Furnaces Y es Cool Only Systems Y es Hydronic (Hot W ater) Zone Heat – 2 Wires Y es Hy ...

  • White Rodgers 1F86ST-0471 - page 2

    2 W ARNING ! Thermostat installation and all components of the control system shall conform to Class II circuits per the NEC code. INST ALLA TION Remove Old Thermostat A standard heat/cool thermostat consists of three basic par ts: 1. The cov er , which may be either a snap-on or hinge type. 2. The base, which is remo ved b y loosening all captiv e ...

  • White Rodgers 1F86ST-0471 - page 3

    3 Displays the po wer lev el of the 2 “AA” batteries: indicates good power le vel. indicates batteries at about half power . “ Cambiar ” (Change ) indicates batteries are low and should be replaced with 2 new premium brand “AA” Alkaline batteries. Time Day of Week Setting T emperature Room T emperature T emperature Up/Down RETENER Butto ...

  • White Rodgers 1F86ST-0471 - page 4

    4 INST ALLER/CONFIGURA TION MENU Press the Menu b utton for at least 5 seconds . The displa y will show item #1 in the table belo w . Press Menu to adv ance to the ne xt menu item. Press or to change a menu item. Shaded items are not av ailable on 1F86. 1. Select Rever sing V alve Output (SS/HP switch must be set at HP , omitted if SS/HP s witch is ...

  • White Rodgers 1F86ST-0471 - page 5

    5 INST ALLER/CONFIGURA TION MENU 4. Energy Management Reco very: (this step is skipped if confi gured to be non-programmab le). Energy Management Recov ery (E) On enables the thermostat to star t heating or cooling early to make the building temper ature reach the program setpoint at the time you specify . Heating will star t 5 minutes early for e ...

  • White Rodgers 1F86ST-0471 - page 6

    6 OPERA TING Y OUR THERMOST A T IMPOR T ANT! Choose the V ent Setting (A uto or On) Set the VENT Switch to A uto or On. V ent A uto is the most commonly selected setting and runs the f an only when the heating or cooling system is on. V ent On runs the f an continuously f or increased air circulation or to allow additional air cleaning. Choose the ...

  • White Rodgers 1F86ST-0471 - page 7

    7 Energy Sa ving Factory Pre-Pr ogram The 1F80ST -0471 ther mostats are programmed with the energy sa ving settings shown in the tab le below f or all da ys of the week. If this program suits y our needs, simply set the thermostat clock and press the Arrancar button. The table belo w shows the f actory set heating and cooling schedule for all da ys ...

  • White Rodgers 1F86ST-0471 - page 8

    TR OUBLESHOO TING Reset Operation Note: When thermostat is reset, installer confi guration menu settings and prog ramming will reset to f actory settings. If a voltage spik e or static discharge b lanks out the display or causes err atic thermostat operation, you can reset the thermo- stat by remo ving the wires from terminals R and C (do not shor ...

Manufacturer White Rodgers Category Thermostat

Documents that we receive from a manufacturer of a White Rodgers 1F86ST-0471 can be divided into several groups. They are, among others:
- White Rodgers technical drawings
- 1F86ST-0471 manuals
- White Rodgers product data sheets
- information booklets
- or energy labels White Rodgers 1F86ST-0471
All of them are important, but the most important information from the point of view of use of the device are in the user manual White Rodgers 1F86ST-0471.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals White Rodgers 1F86ST-0471, service manual, brief instructions and user manuals White Rodgers 1F86ST-0471. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product White Rodgers 1F86ST-0471.

A complete manual for the device White Rodgers 1F86ST-0471, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use White Rodgers 1F86ST-0471 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of White Rodgers 1F86ST-0471.

A complete White Rodgers manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual White Rodgers 1F86ST-0471 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the White Rodgers 1F86ST-0471, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the White Rodgers 1F86ST-0471, that we can find in the current document
3. Tips how to use the basic functions of the device White Rodgers 1F86ST-0471 - which should help us in our first steps of using White Rodgers 1F86ST-0471
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with White Rodgers 1F86ST-0471
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of White Rodgers 1F86ST-0471 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning White Rodgers 1F86ST-0471?

Use the form below

If you did not solve your problem by using a manual White Rodgers 1F86ST-0471, ask a question using the form below. If a user had a similar problem with White Rodgers 1F86ST-0471 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)