English dropdown-ico

Manual Integra DTR-10.5

152 pages 12.01 mb
Download

Go to site of 152

Summary
  • Integra DTR-10.5 - page 1

    A V Receiv er DTR-10.5 Instr uction Manual ...

  • Integra DTR-10.5 - page 2

    2 Impor tant Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follo w all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any v entilation openings. Install in accordance with the manufacturer’ s instructions. 8. Do not install near an y heat ...

  • Integra DTR-10.5 - page 3

    3 Thank y ou for pur chasing an Integra A V Receiver . Please read this manual thor oughly before making connections and plugging in the unit. F ollowing the instructions in this manual will enable y ou to obtain optimum performance and listening enjoyment from y our new A V Receiver . Please retain this manual f or future refer ence. Precautions 1 ...

  • Integra DTR-10.5 - page 4

    4 T able of Contents Important Safety Instructions ..........................2 Precautions ........................................................3 Features .............................................................6 Supplied Accessories .......................................8 Connecting the Supplied Power Cord ............ 8 Before Using the ...

  • Integra DTR-10.5 - page 5

    5 T able of Contents —Continued Setup Menu ...................................................... 82 OSD Map (MAIN A) ....................................... 82 OSD Map (MAIN B) ....................................... 84 OSD Map (ZONE 2) ...................................... 85 Navigating the Setup Menu ........................... 86 Hardware Se ...

  • Integra DTR-10.5 - page 6

    6 Features Amplifier Features • 192 kHz/24-Bit D A C for All Channels • Color -Coded Heavy Duty Dual Banana Plug Compatible T ransparent Speaker P osts • Color -Coded 7.1 Multi-Channel Inputs and Pre Outs (A ustralian model) (USA and Canadian model: option) • Po wered Zone 2 and Zone 3 • 5 12V DC T rigger Outputs and 3 IR Inputs/ Outputs ...

  • Integra DTR-10.5 - page 7

    7 Features —Continued • THX is a trademark or re gistered trademark of THX Ltd. • HDMI, the HDMI logo and High Defi nition Multimedia Interface are trademarks or re gistered trademarks of HDMI Licensing, LLC. • Manufactured under license from Dolby Laboratories. “Dolby , ” “Pro Logic, ” “Surround EX, ” and the double-D symbol a ...

  • Integra DTR-10.5 - page 8

    8 Supplied Accessories Make sure you ha ve the follo wing accessories: Plug the supplied power cord into this A C INLET . • Do not use a power cord other than the one supplied with the DTR-10.5. The po wer cord supplied is designed for use with the DTR-10.5 and should not be used with any other de vice. • Nev er hav e the power cord disconnecte ...

  • Integra DTR-10.5 - page 9

    9 Bef ore Using the DTR-10.5 Notes: • The supplied batteries should last for about six months, although this will vary with usage. • If the remote controller doesn’t w ork reliably , try replacing the batteries. • Don’t mix ne w and old batteries, or different types of batteries. • If you intend not to use the remote controller for a lo ...

  • Integra DTR-10.5 - page 10

    10 Before Using the DTR-10.5 —Continued The following option boards are a vailable for the DTR-10.5 as of October 2004. Distributed regions (as of October 2004) (the United States) (Australia) Product n umber: C-LINK Provides i.LINK (A UDIO) terminals. T wo input terminals are av ailable. This option board will be inserted into slot A on the DTR- ...

  • Integra DTR-10.5 - page 11

    11 Before Using the DTR-10.5 —Continued The option boards should be installed in their individual designated slots. Installing the option board a different slot may cause failure. Installing the Option Boards 1 T urn off the po wer and unplug the power cord both fr om the DTR-10.5 and electrical outlet. Be sure to turn off the po wer of the DTR-1 ...

  • Integra DTR-10.5 - page 12

    12 Inde x P ar ts and Facilities Here is an explanation of the controls and displays on the front panel of the DTR-10.5. The specifications for your model may differ due to re gional requirements. Inner panel Front P anel Pure Audio Open DVD Display Video 1 Video 2 V ideo 3 Video 4 Video 5 Video 6 Video 7 Standby Master Volume Rec/ Zone 3 Red ) ( ...

  • Integra DTR-10.5 - page 13

    13 Index P ar ts and F acilities —Continued For further operational instructions, see the pages indicated in brackets [ ]. 1 Standby indicator [9, 52] Lights when the DTR-10.5 is in the standby state and when a signal is receiv ed from the remote controller . 2 Standby/On b utton [52] Press this button, the DTR-10.5 turns on and the display light ...

  • Integra DTR-10.5 - page 14

    14 Index P ar ts and F acilities —Continued I Exit button [86] Press this button to return to the last menu. T o exit from the setup mode, press the [Setup] button again. J Select/Preset dial When the input source is FM or AM, turning this jog dial allows you to switch between your preset stations. When used with other buttons, the [Select/ Prese ...

  • Integra DTR-10.5 - page 15

    15 Index P ar ts and F acilities —Continued A Listening mode or input format indicator s One of these indicators lights to show the format of the current input source. In addition, one of the listening mode indicators lights to indicate the current listening mode. B Multifunction display During normal operation, shows the current input source. Wh ...

  • Integra DTR-10.5 - page 16

    16 Index P ar ts and F acilities —Continued Rear P anel E GND “ Net - Tune ” is a trademark of Onkyo Corporation. ETHERNET ( Net - Tune ) A RS 232 IR IN + 12 V DC PWR SUPPLY MAIN GND ZONE 3 ZONE 2 20mA MAX. 12 V TRIGGER OUT E MODEL NO. DTR - 10.5 GND C D E B A 12 V TRIGGER OUT 100mA MAX. 100mA MAX. 100mA MAX. TOTAL 100mA MAX. 200mA MAX. UDD A ...

  • Integra DTR-10.5 - page 17

    17 Index P ar ts and F acilities —Continued 1 DIGIT AL OPTICAL IN/OUT The input/output terminals for digital sound signal. The sound quality equals the signal passed through the CO AXIAL terminals. 2 DIGIT AL CO AXIAL IN/OUT The input/output terminals for digital sound signal. The sound quality equals the signal passed through the OPTICAL termina ...

  • Integra DTR-10.5 - page 18

    18 Index P ar ts and F acilities —Continued The DTR-10.5’ s remote controller is a multipurpose device that can be used to control not just the DTR-10.5 but your other A V components as well. This section explains ho w its various operating modes can be used to control the DTR-10.5. When you use the Net-T une mode, see page 74 for details. See ...

  • Integra DTR-10.5 - page 19

    19 Index P ar ts and F acilities —Continued E Direct button This button is used to select the Direct listening mode. F Pure A button This button is used to select the Pure Audio listen- ing mode. G T est T one , CH SEL, Le vel – & Level+ b uttons These buttons are used to adjust the le vel of each speaker indi vidually . These functions can ...

  • Integra DTR-10.5 - page 20

    20 Speaker Placement The DTR-10.5 has many e xcellent features to recreate a clear three-dimensional sound image and liv ely sound movement. This enables you to enjoy , at home, the rich sound ef fects of a liv e theater or concert hall performance. When playing a D VD, you can enjoy sound ef fects provided by DTS or Dolby Digital, depending on the ...

  • Integra DTR-10.5 - page 21

    21 Speaker Placement —Continued T o fully enjoy surround sound, the configuration and placement of the speak ers used are important. Be sure to read through the descriptions in the previous page and sho wn below . This section provides e xamples and descriptions that assume a typical situation. Front Left and Right Speaker s, and Center Speaker ...

  • Integra DTR-10.5 - page 22

    22 Speaker Placement —Continued Subwoof er Using a subwoofer greatly improv es the volume le vel and sound quality of bass sounds. The subw oofer effect depends not only on the listening position but also on the shape of the listening room. • In general, place the subwoofer in a corner of the room or at a point 1/3 the width of the room. • Pl ...

  • Integra DTR-10.5 - page 23

    23 Speaker Placement —Continued The following speak er placements will be av ailable according to the number of speakers connected to the DTR-10.5. For the number of speaker channel, _.1 ch represents a subwoofer . Key to ab breviations: FL : Front left speaker , FR : Front right speaker , C : Center speaker , SL : Surround left speaker , SR : Su ...

  • Integra DTR-10.5 - page 24

    24 Speaker Placement —Continued The DTR-10.5 has two speaker terminal blocks for speak er system [A] and [B]. This allo ws you to build two 7.1 ch home theater systems, and various speak er placements and connections are also av ailable. For e xample, some channels of either speaker system can be used for another room (Zone 2), or you can select ...

  • Integra DTR-10.5 - page 25

    25 Speaker Placement —Continued Main room A: 7.1 ch speaker systems and the two ad ditional front speakers (When you want to use speaker system [A] for mo vies and enjoy 7.1 surround sound and the two additional front speakers for classic music.) • Set all the zone parameters for speaker system [A] to “Main A. ” • Set the front speaker pa ...

  • Integra DTR-10.5 - page 26

    26 Speaker Placement —Continued Main room A: 5.1 ch speaker system including the fr ont speakers connected thr ough the BTL or bi- amp connections • For speaker system [A], set the surround back speak er parameters to “BTL for Front ” or “Bi-Amp for Front” and all the other speaker parameters to “Main A” (For details on speaker conn ...

  • Integra DTR-10.5 - page 27

    27 Connecting Speaker s After determining the layout of your speaker system, it is now necessary to connect the speak ers correctly to your DTR-10.5. For the USA and Canadian models, you can also use banana plugs/connectors. Y ou can connect speakers with an impedance of between 4 and 16 ohms. If the impedance of any of the connected speakers is 4 ...

  • Integra DTR-10.5 - page 28

    28 Connecting Speakers —Continued Use the SUBWOOFER PRE OUT A/B jack to connect a subwoofer with a b uilt-in power amplifier . If your subwoofer does not ha ve a built-in amplifier , connect an amplifier to the SUBWOOFER PRE OUT A/B jack and the subwoofer to the amplifier . Y ou can connect two subwoofers for dif ferent speaker systems. Y ou ...

  • Integra DTR-10.5 - page 29

    29 Connecting Speakers —Continued T o get more po werful sound output, you can make the BTL (Bridged T ransless) connection using the front and surround back speaker terminals on the DTR-10.5. In this connection, two speaker outputs of the stereo amplifier will be used as mono output by combining the individual stereo channel outputs, allo wing ...

  • Integra DTR-10.5 - page 30

    30 Connecting Antennas This chapter explains ho w to connect the supplied indoor FM antenna and AM loop antenna, and how to connect commercially av ailable outdoor FM and AM antennas. The supplied indoor FM antenna is for indoor use ony . If you cannot achiev e good reception with the supplied indoor FM antenna, try using a commercially av ailable ...

  • Integra DTR-10.5 - page 31

    31 Connecting Antennas —Continued The supplied indoor AM loop antenna is for indoor use only . If you cannot achiev e good reception with the supplied indoor AM loop antenna, try using a commercially av ailable outdoor AM antenna. If you cannot achiev e good reception with the supplied indoor FM antenna, try using a commercially av ailable outdoo ...

  • Integra DTR-10.5 - page 32

    32 Connecting A V Components In addition to the con ventional terminals, the DTR-10.5 has v arious terminals that are capable of next-generation digital transmission. Before connecting A V components to the DTR-10.5, make sure that your cable type matches the terminal shape and the signal type and that the cable length is appropriate for the placem ...

  • Integra DTR-10.5 - page 33

    33 Installation and Connections Connecting A V Components —Continued • When you play the audio signal from the DIGIT AL IN terminals in Zone 2, the source will be downmixed into 2- channel analog audio signal and output to the A UDIO OUT terminals. • When you play the audio signal from the DIGIT AL IN terminals in Zone 3, only the PCM signal ...

  • Integra DTR-10.5 - page 34

    34 Connecting A V Components —Continued • This section describes the connections for displaying the video source or the operating information of the DTR-10.5 on a monitor device such as a TV or projector . Before making a connection, check the terminal types on the monitor device and acquire the necessary cables by referring to page 33. • Whe ...

  • Integra DTR-10.5 - page 35

    35 Installation and Connections Connecting A V Components —Continued • When connecting a D VD player to the DTR-10.5, make connections for video and audio signals using digital and analog terminals. Before making connections, refer to pages 32 and 33 for correct connections. • When you want to perform analog recording of the audio signal from ...

  • Integra DTR-10.5 - page 36

    36 Connecting A V Components —Continued • When connecting a D VD recorder or digital VCR to the DTR-10.5, make connections for video and audio signals using digital and analog terminals. Before making connections, refer to pages 32 and 33 for correct connections. • This section shows the connection e xample when you use the VIDEO 1 as an inpu ...

  • Integra DTR-10.5 - page 37

    37 Installation and Connections Connecting A V Components —Continued • When connecting a VCR to the DTR-10.5, make connections for video and audio signals. Before making connec- tions, refer to pages 32 and 33 for correct connections. • This section shows the connection e xample when you use VIDEO 2 or VIDEO 3 as an input. In this case, you d ...

  • Integra DTR-10.5 - page 38

    38 Connecting A V Components —Continued E GND “ Net - Tune ” is a trademark of Onkyo Corporation. ETHERNET ( Net - Tune ) A RS 232 IR IN + 12 V DC PWR SUPPLY MAIN GND ZONE 3 ZONE 2 20mA MAX. 12 V TRIGGER OUT E GND C D E B A 12 V TRIGGER OUT 100mA MAX. 100mA MAX. 100mA MAX. TOTAL 100mA MAX. 200mA MAX. FRONT L CENTER FRONT R SURR BACK L ( ASSIG ...

  • Integra DTR-10.5 - page 39

    39 Installation and Connections Connecting A V Components —Continued • When connecting a DBS tuner , DBS TV , or BS/CS tuner to the DTR-10.5, make connections for video and audio signals using digital and analog terminals. Before making connections, refer to pages 32 and 33 for correct connec- tions. • This section shows the connection e xamp ...

  • Integra DTR-10.5 - page 40

    40 Connecting A V Components —Continued • When connecting a CD player to the DTR-10.5, make connections using digital or analog terminals. Before making connections, refer to page 32 for correct connections. This section sho ws the connection example when you use the default audio input assignment settings. Ho wev er , when you use coaxial cabl ...

  • Integra DTR-10.5 - page 41

    41 Installation and Connections Connecting A V Components —Continued • When connecting a MD recorder , D A T deck or CD recorder to the DTR-10.5, make connections using digital or analog terminals. Before making connections, refer to page 32 for correct connections. • Connect a cassette or D A T tape deck to T APE1, and an MD or CD recorder t ...

  • Integra DTR-10.5 - page 42

    42 Connecting A V Components —Continued The i.LINK (A UDIO) terminal is available when the i.LINK terminal board [A] is installed. What is i.LINK i.LINK is an appellation of IEEE1394, which is the digital interface standard defined by the Institute of Electrical and Electronics Engineers (IEEE). Connecting i.LINK (A UDIO)-supported devices allo ...

  • Integra DTR-10.5 - page 43

    43 Installation and Connections Connecting A V Components —Continued Interconnection of i.LINK (A UDIO)-supported Devices The i.LINK connection allows for data transfer , ev en if the DTR-10.5 is connected to other devices via another i.LINK (A UDIO)-supported device. Y ou can connect up to 17 de vices in a daisy chain (in-line) connection arrang ...

  • Integra DTR-10.5 - page 44

    44 Connecting A V Components —Continued How to Configure i.LINK Connections Selecting a Device When the i.LINK connection is ready , you can use the setup menu to select any de vice which is connected via i.LINK. Once you hav e configured the i.LINK setting, the next time you select the input source, it will be selected as the play- ing source. ...

  • Integra DTR-10.5 - page 45

    45 Installation and Connections Connecting A V Components —Continued The HDMI terminals are a vailable when the HDMI terminal board [L] is installed. About the HDMI (High Definition Multimedia Interface) The High Definition Multimedia Interface (HDMI) is an interface standard for ne xt-generation TV , designed to connect between STB (Set T op B ...

  • Integra DTR-10.5 - page 46

    46 Connecting A V Components —Continued Connection example when the source selection is perf ormed on the DTR-10.5 HDMI IN HDMI OUT HDMI OUT RS 232 IR IN + 12 V DC PWR SUPPLY MAIN GND ZONE 3 ZONE 2 20mA MAX. 12 V TRIGGER OUT E MODEL NO. DTR - 10.5 GND C D E B A 12 V TRIGGER OUT 100mA MAX. 100mA MAX. 100mA MAX. TOTAL 100mA MAX. 200mA MAX. UPA AC I ...

  • Integra DTR-10.5 - page 47

    47 Installation and Connections Connecting -compatib le A V Components The terminal on the DTR-10.5 is for connecting other Integra/Onk yo components equipped with the same terminal. When a component is connected to the terminal, it can be operated by the remote controller supplied with the DTR-10.5. In addition, when you connect a component to the ...

  • Integra DTR-10.5 - page 48

    48 Connecting Components not Reached b y the Remote Contr oller Signals (IR IN) In order to use the remote contr oller to control the DTR-10.5 from a r emote location, you will need to prepar e a multiroom kit (sold separately) such as one listed below: • Multiroom kits such as those made by Niles ® and Xantech ® RF Receiv ers can also be used ...

  • Integra DTR-10.5 - page 49

    49 Installation and Connections Using an External De vice with 12V T rigger T erminal Y ou can turn on the A V devices connected to the DTR-10.5 automatically using the output signal from the 12V TRIGGER OUT terminal on the DTR-10.5. Making a Connection Y ou can connect up to five de vices to the 12V TRIGGER Phoenix (Pluggable Connector) terminal ...

  • Integra DTR-10.5 - page 50

    50 Basic Operation of Remote Contr oller Buttons The remote controller supplied with the DTR-10.5 is a multifunctional remote controller , so you can operate not only the DTR-10.5 but also A V components connected to the apparatus and components placed in another room. The basic operations are explained here. It is recommended that you read and und ...

  • Integra DTR-10.5 - page 51

    51 Operations Basic Operation of Remote Controller Buttons —Continued Before operating the connected component, follow the instructions on pages 124 through 133 to make appropriate settings using the remote controller . When you perform the procedures on the DTR-10.5, press the [Zone 2] (or [Rec/Zone 3]), and turn the [Select/Preset] (or [Control ...

  • Integra DTR-10.5 - page 52

    52 Connecting the P o wer/Basic Operations • Before you plug in the DTR-10.5, confirm that all connections hav e been made properly . • T urning on the power may cause a momentary power sur ge, which might interfere with other electrical equipment on the same circuit, such as computers. If this happens, use a wall outlet on a dif ferent circui ...

  • Integra DTR-10.5 - page 53

    53 Operations Connecting the P ower/Basic Operations —Continued Before you can use the remote controller , you must perform steps 1 and 2 in the “T urning on the Power” section and place the DTR-10.5 in the standby state. T urning on the P ower fr om the Remote Controller 1 Press the scroll wheel. “ AMP” appears on the remote controller? ...

  • Integra DTR-10.5 - page 54

    54 Connecting the P ower/Basic Operations —Continued Listening with Headphones T o listen with headphones, plug a pair of headphones with a standard stereo plug into the Phones jack on the DTR-10.5 front panel. • When you connect headphones, no sound will be heard from the speakers. • While the Dolby Headphone feature is activ e, appears on t ...

  • Integra DTR-10.5 - page 55

    55 Operations Connecting the P ower/Basic Operations —Continued Using the Sleep Timer (remote controller only) W ith the sleep timer you can set the DTR-10.5 so that it automatically turns off after a set period. T emporarily Changing the Speaker Output Levels (remote contr oller only) T o change the indi vidual speaker volumes temporarily , foll ...

  • Integra DTR-10.5 - page 56

    56 Connecting the P ower/Basic Operations —Continued Switching the Displa y While listening to or watching an input source, you can display information regarding the type of source and sig- nal being input. When an input source other than FM or AM is selected: * When the input signal is digital audio other than PCM The program format is displayed ...

  • Integra DTR-10.5 - page 57

    57 Operations Connecting the P ower/Basic Operations —Continued Changing the A udio Mode The DTR-10.5 accepts analog, digital, i. LINK (A UDIO), and multichannel signals for audio input. Y ou can choose the kind of signal to be played for a specific device. F or Zone 2, the DTR-10.5 accepts only analog and digital signals for audio input. • ? ...

  • Integra DTR-10.5 - page 58

    58 Using the Listening Modes T ypes of Listening Modes Listening modes on the DTR-10.5 enable you to enjoy movie theater or concert hall quality sounds in your room. The DTR-10.5 pro vides the following listening modes. Before playing a source in optimal sound, be sure to complete the Speaker/Output Setup (See pages 88 - 91). Direct This mode allow ...

  • Integra DTR-10.5 - page 59

    59 Operations Using the Listening Modes —Continued DTS-ES Matrix This mode plays in 6.1 channels the music and movies recorded in DTS-ES. Sources recorded in DTS-ES include data for the surround back channel, and each channel is reproduced in 6.1 channels. This mode can be used with CDs, D VDs, and LDs with the mark. DTS NEO:6 This mode enables 6 ...

  • Integra DTR-10.5 - page 60

    60 Using the Listening Modes —Continued Studio-Mix This mode is suitable for rock‘n’ roll and popular music. The image of po werful sounds is reproduced as sounds that make you feel as if you are sitting in a li ve house. TV Logic This mode is suitable for television programs broadcast from studios. Y ou may feel as if you are sitting in a te ...

  • Integra DTR-10.5 - page 61

    61 Operations Using the Listening Modes —Continued The DTR-10.5 provides v arious listening modes. Note: The av ailable modes depend on the input signal you selected. Operating on the DTR-10.5 Operating with the Remote Controller Tip: A table listed later in this manual shows which listening mode can be used with which input signal format. See pa ...

  • Integra DTR-10.5 - page 62

    62 Listening to Radio Br oadcasts One of the features of the DTR-10.5 that is most frequently used is its ability to play FM and AM broadcast radio stations. The DTR-10.5 pro vides a number of listening modes perfect for listening to the radio and getting the most out of your audio system. Also, by presetting radio stations that you listen to frequ ...

  • Integra DTR-10.5 - page 63

    63 Operations Listening to Radio Broadcasts —Continued Presetting a Radio Station Up to 40 stations can be stored in memory as preset radio stations. Selecting a Preset Radio Station When using the DTR-10.5: When using the remote controller: Erasing a Preset Radio Station 1 T une into the radio station y ou desire (See “ T uning Into a Radio St ...

  • Integra DTR-10.5 - page 64

    64 Enjo ying Multichannel Pla ybac k F or USA and Canadian models, multichannel playback is a vailable when the multichannel terminal board [E] is installed. T o the DTR-10.5, you can be connected up to two devices, such as a D VD player , that deal with multi- channel sounds (5.1-7.1 channels). T o use multichannel connections, you need to specify ...

  • Integra DTR-10.5 - page 65

    65 Operations Enjoying Multic hannel Playbac k —Continued Y ou can also set the listening mode in advance for mul- tichannel playback (Listening Mode Preset). T o do so, select “Input Setup” → “Listening Mode Preset” → “Multichannel” on the Setup menu to choose the pre- ferred mode. This def aults to “Multichannel. ” See page ...

  • Integra DTR-10.5 - page 66

    66 Enjo ying Mo vies and Music in the Remote Zone (Zone 2/3) Y ou can connect speakers and amplifiers for the remote zone, and enjoy dif ferent sources in a remote zone (Zone 2 or Zone 3). There are three ways to enjoy in a remote zone: When Connecting Only Speaker s (Zone 2) • Y ou can enjoy a different source in a remote zone while a 5.1 chann ...

  • Integra DTR-10.5 - page 67

    67 Operations Enjoying Mo vies and Music in the Remote Zone (Zone 2/3) —Continued When Connecting the P ower Amplifier (Zone 2 or Zone 3) • Y ou can enjoy a different source in a remote zone while a 7.1 channel source is being played in the main room. • Adjust the volume le vel on the DTR-10.5 (not on the power amplifier). • The sleep tim ...

  • Integra DTR-10.5 - page 68

    68 Enjoying Mo vies and Music in the Remote Zone (Zone 2/3) —Continued Operating with the Remote Controller When operating with the remote controller , how to operate depends on the location of Zone 2 or Zone 3, or the distance from the DTR-10.5. • Point the remote controller at the infrared receiv er on the DTR-10.5, and then operate the contr ...

  • Integra DTR-10.5 - page 69

    69 Operations Enjoying Mo vies and Music in the Remote Zone (Zone 2/3) — Continued Recor ding a Sour ce The DTR-10.5 can not only record the playing source but can also record a source while playing another source. Y ou can also combine a video and audio to cre- ate a new source. Signals that can be output to a video/audio recording device v ary ...

  • Integra DTR-10.5 - page 70

    70 Recording a Sour ce —Continued Some steps can also be operated on the remote control- ler , but described here are operations on the DTR-10.5. Notes: • No surround effects can be recorded. • No D VD or any sources whose copyright is protected can be recorded. • There are some restrictions on recording of digital audio/video signals. Refe ...

  • Integra DTR-10.5 - page 71

    71 Operations Recording a Sour ce —Continued Y ou can add audio signals from a source to a video of another source to make your o wn custom video record- ings. Below is an e xample of recording audio signals from a CD player connected to the DIGIT AL IN OPTI- CAL 2 jack and the video from a video camera con- nected to VIDEO IN 3 onto a video cass ...

  • Integra DTR-10.5 - page 72

    72 Enjo ying Net A udio Y ou can enjoy Net A udio when the ETHER- NET terminal board [B] (f or Net A udio) is inserted. The DTR-10.5 can be used as a Net-T une client on a standard Ethernet network, allo wing you to play music (MP3, W A V) stored on your Network Audio server through the DTR-10.5. If your network is connected to the Internet, you ca ...

  • Integra DTR-10.5 - page 73

    73 Operations Enjoying Net A udio —Continued Notes: • T o use Internet radio with the DTR-10.5, your broad- band Internet connection needs to be up and running and able to access the W eb . Please consult your ISP if you hav e any problems with your Internet connec- tion. • The DTR-10.5 uses DHCP and AutoIP to configure its network settings ...

  • Integra DTR-10.5 - page 74

    74 Enjoying Net A udio —Continued T o select Net-T une mode, press the [Mode] b utton, and then roll the scr oll wheel until “NET -T” appears on the display . Note: While neither the [Input] button nor [Mode] b utton is illuminated, the scroll wheel changes the input source and remote controller mode simultaneously (when you enter the Net-T u ...

  • Integra DTR-10.5 - page 75

    75 Operations Enjoying Net A udio —Continued 1 Number/letter buttons These buttons are used to enter numbers and letters when searching for music in your Network Audio server . 2 Mode button This button is used with the scroll wheel to select the remote controller modes. Press this button first, and then roll the scroll wheel until “NET -T” ...

  • Integra DTR-10.5 - page 76

    76 Enjoying Net A udio —Continued T o listen to Internet radio, the connection/configuration requirements listed on pages 72-73 must be satisfied. Enjoying Internet Radio 1 While neither the [Input] button nor [Mode] button is illuminated, roll the scr oll wheel to select IRD (Internet Radio). “NET -T” appears in the bottom line. On the DTR ...

  • Integra DTR-10.5 - page 77

    77 Operations Enjoying Net A udio —Continued Presetting Internet Radio Stations Y ou can preset up to 30 Internet radio stations. Choosing a Preset Internet Radio Station Erasing a preset Internet radio station 7 Press the [Enter] button. Buffering starts with the follo wing mes- sage displayed. When the buf fering is complete, the DTR-10.5 start ...

  • Integra DTR-10.5 - page 78

    78 Enjoying Net A udio —Continued T o play music files sa ved on your PC, the requirements listed on page 72 must be satisfied. • T o stop playback: Press the [ ] button on the remote controller . • T o pause playback: Press the [ ] button on the remote controller . • T o select a track: Press the [ ]/[ ] button on the remote control- ler ...

  • Integra DTR-10.5 - page 79

    79 Operations Enjoying Net A udio —Continued Selecting a T rack List Y ou can use the music file data saved on the Netw ork Audio server to select which tracks to play . For e xample, you can: • Select a track list based on the album name • Select a track list based on the artist name • Select a track list based on the genre name • Selec ...

  • Integra DTR-10.5 - page 80

    80 Enjoying Net A udio —Continued The music server settings can be made while you select the music server as an input source. Con fi guring the Music Server 1 Press the [Input] button, and then roll the scr oll wheel to select MSR V . Make sure that the “MSR V” is displayed when you configure the music server . 2 Press the scroll wheel, and ...

  • Integra DTR-10.5 - page 81

    81 Operations Enjoying Net A udio —Continued Music Server Memo Internet Radio Memo ...

  • Integra DTR-10.5 - page 82

    82 Setup Menu When making the various settings required to configure your DTR-10.5 for optimum performance, you can use either the OSD Menu that appears on your television monitor or you can use the display on the front of the DTR-10.5. The OSD Menu is a settings menu that is displayed on your TV monitor . The DTR-10.5 is equipped with an independ ...

  • Integra DTR-10.5 - page 83

    83 Setup Menu Setup Menu —Continued Main A Setup ===================== 0.Hardware Setup 1.Speaker/Output Setup 2.Input Setup 3.Listening Mode Setup 4.Audio Adjust 5.Preference 6.i.LINK Setup 7.Network Setup 8.Lock/Version 4.Audio Adjust ===================== 1.Tone Control 5.Preference ===================== 1.Volume Setup 2.Headphone Level Setup ...

  • Integra DTR-10.5 - page 84

    84 Setup Menu —Continued OSD Map (MAIN B) Main B Setup ===================== 0.Hardware Setup 1.Speaker Setup 2.Input Setup 3.Audio Adjust 4.Preference 0.Hardware Setup ===================== 1.TV Format Setup 1.Speaker Setup ===================== 1.Speaker Impedance 2.Speaker Crossover 3.Speaker Distance 4.Level Calibration 5.THX Audio Setup 2.In ...

  • Integra DTR-10.5 - page 85

    85 Setup Menu Setup Menu —Continued OSD Map (ZONE 2) Zone 2 Setup ===================== 0.Hardware Setup 1.Speaker Setup 2.Input Setup 3.Listening Mode Setup 4.Audio Adjust 5.Preference Zone 2 Setup ===================== 0.Hardware Setup 2.Input Setup 3.Listening Mode Setup 4.Audio Adjust 5.Preference 0.Hardware Setup ===================== 1.TV F ...

  • Integra DTR-10.5 - page 86

    86 Setup Menu —Continued Y ou can change Setup Menu settings using the buttons on the front panel and on the remote controller . The illustrations here represent the remote controller . When you perform settings using the buttons on the front panel, press the [Setup] button first. Use the [Select/Preset] dial instead of the [ ]/[ ] buttons to se ...

  • Integra DTR-10.5 - page 87

    87 Setup Menu Har d ware Setup In this section, you will perform the initial settings for the following scenarios. • When you want to change the DTR-10.5’ s remote control ID. • When you want to fix the TV Format setting to P AL or NTSC. • When you want to fix the AM Frequency Step setting to 9 kHz or 10 kHz. Remote ID This section explai ...

  • Integra DTR-10.5 - page 88

    88 Speaker/Output Setup The DTR-10.5 provides a wide range of v ariations in speaker connections and speaker settings, so you ha ve to specify speaker settings according to conditions of each v ariation. For proper selection of an A V device connected at switching of the input type, you also need to allocate “audio output” and “video output? ...

  • Integra DTR-10.5 - page 89

    89 Setup Menu Speaker/Output Setup —Continued Bi-Amp for Fr ont: This setting can be made only when you set the “(Speaker B) Front L/R” setting to “Main A” or “Main B. ” Select this when using the front speaker in main room B by connecting the front channel and the surround back channel to the speaker via Bi-Amp (See page 29). Not Use ...

  • Integra DTR-10.5 - page 90

    90 Speaker/Output Setup —Continued Perform the setup procedure below follo wing the operating instructions described on page 86. 1. Select the unit of distance from “Unit. ” Y ou can select either “feet” or “meters. ” The default varies depending on the re gion. 2. Set the distance y ou measured. Enter all the values for e very speake ...

  • Integra DTR-10.5 - page 91

    91 Setup Menu Speaker/Output Setup —Continued This is for setting up a home theater with a THX-Ultra2 compliant speaker system. These settings will be effecti ve in the listening mode for the THX Ultra2 Cinema and THX Music Mode. The settings in the THX Audio Setup sub-menu can be configured for both “Main A” and “Main B. ” THX Ultra2 Su ...

  • Integra DTR-10.5 - page 92

    92 Speaker/Output Setup —Continued Zone 2 Out, Zone 3 Out This item is displayed when “Zone 2 Out” or “Zone 3 Out” is specified for Analog 1-5 above. The default setting for “Zone 2 Out” is “Pre Out (variable)” and for “Zone 3 Out” is “Line Out (fixed). ” Pre Out (v ariable): Select this when you want to set “variable? ...

  • Integra DTR-10.5 - page 93

    93 Setup Menu Input Setup Items described here ar e set when you pr ess the input source b uttons. The DTR-10.5 is equipped with sev eral types of jacks in addition to the standard audio and video jacks, and multiple jacks are provided for each type. Y ou may freely assign input sources such as CD, PHONO, TUNER, T APE 1, T APE 2, and VIDEO 1-7 to t ...

  • Integra DTR-10.5 - page 94

    94 Input Setup —Continued Follo w procedures below to change an y setting: Hint: When you perform the procedures on the DTR-10.5, after selecting the input source using the input source buttons, press the [Setup] b utton. Next, select the menu you want to configure by turning the [Select/Preset] dial and press the dial to confirm the selection. ...

  • Integra DTR-10.5 - page 95

    95 Setup Menu Input Setup —Continued Subwoof er Sensitivity This item appears when the multichannel terminal board [E] is inserted. The following are also settings for “Multichannel 1” or “Multichannel 2” (cannot be specified separately for each input source). Some D VD decks output the LFE channel at 15 dB lower than the other channels ...

  • Integra DTR-10.5 - page 96

    96 Input Setup —Continued Y ou can specify a listening mode you frequently use for each input source. When a picture you like and frequently watch is a Dolby Digital source, for example, you may specify “Dolby Digital, ” and if a CD of classical music you are fond of is a PCM source, you can specify “Pure Audio. ” Selecting “Last” wil ...

  • Integra DTR-10.5 - page 97

    97 Setup Menu Input Setup —Continued D .F . Mono Here, you can specify the listening mode for playing digital signals such as Dolby Digital and AAC recorded in monaural. This option can be set for Main B and Zone 2 as well as for Main A. Y ou can select from the listening modes listed below: (Main A/B) Pure Audio, Direct, Stereo, Mono (Default), ...

  • Integra DTR-10.5 - page 98

    98 Input Setup —Continued When multiple devices are connected to the DTR-10.5, the volume may v ary for a device ev en when volume settings on the DTR-10.5 are identical. Reducing the variance in the v olume level will allo w you to enjoy sounds at the same v olume lev el without adjusting the volume control on the DTR-10.5. IntelliV olume Use th ...

  • Integra DTR-10.5 - page 99

    99 Setup Menu Listening Mode Setup This menu allows you to configure the listening mode settings including audio effect and playback options. This sub-menu allows you to configure the audio ef fect and playback options when you play a source in the Mono listening mode. a. Re-EQ/Academ y This option allows you to configure whether the Re-EQ or Ac ...

  • Integra DTR-10.5 - page 100

    100 Listening Mode Setup —Continued Re-EQ On: Adjusts the soundtrack in which the treble is ov eremphasized, so that the sound is optimized for home theater . Academy On: Lowers the treble le vel and filters the noise when the source contains emphasized treble sound and too much hiss, such as an old mono audio movie recorded onto videotape. b. M ...

  • Integra DTR-10.5 - page 101

    101 Setup Menu Listening Mode Setup —Continued • When the impedance setting for “Front L/R A” or “Front L/R B” in the Speaker Impedance sub-menu is set to “6 ohms” or “4 ohms, ” the av ailable options will be “ A” and “B. ” A (Default): Outputs the source from the speakers connected to the FR ONT L/R SPEAKERS A terminals ...

  • Integra DTR-10.5 - page 102

    102 Listening Mode Setup —Continued • When the settings for “(Speaker A) Surr Back” and “(Speaker B) Surr Back” in the Speaker Configuration sub-menu differ , the av ailable options will be “ A” and “B. ” A (Default): Outputs the source from the speakers connected to the SURR B A CK L/R SPEAKERS A terminals. B: Outputs the sour ...

  • Integra DTR-10.5 - page 103

    103 Setup Menu Listening Mode Setup —Continued A (Default): Outputs the source from the speaker connected to the CENTER SPEAKERS A terminal. B: Outputs the source from the speaker connected to the CENTER SPEAKERS B terminal. A+B: Outputs the source from the speakers connected to the CENTER SPEAKERS A and CENTER SPEAKERS B terminals. e. Surr L/R S ...

  • Integra DTR-10.5 - page 104

    104 Listening Mode Setup —Continued PLIIx Music: Plays a 5.1ch source as a 6.1 or higher channel source using the Dolby Pro Logic IIx Music mode. NEO:6: Plays a 5.1ch source as a 6.1 or higher channel source using the DTS NEO:6 mode. Off (Default): Plays an original 5.1ch source as it is. c. Re-EQ This option allows you to configure whether the ...

  • Integra DTR-10.5 - page 105

    105 Setup Menu Listening Mode Setup —Continued A+B: Outputs the source from the subwoofers connected to the SUBWOOFER PRE OUT A and SUBWOOFER PRE OUT B terminals. Not Used: No subwoofers are used for playback. This sub-menu allows you to configure the audio ef fect and playback options when you play a Super Audio CD input from the i.LINK (A UDIO ...

  • Integra DTR-10.5 - page 106

    106 Listening Mode Setup —Continued g. Surr Bk Speaker This option configures the surround back speakers to use when the DTR-10.5 plays a Super Audio CD. Select the speaker terminals to which the speakers you w ant to use are connected. This setting can be made when the “(Speaker B) Surr Back” is set to “Main A” in the Speaker Configura ...

  • Integra DTR-10.5 - page 107

    107 Setup Menu Listening Mode Setup —Continued On: Adjusts the soundtrack in which the treble is ov eremphasized, so that the sound is optimized for home theater . f. Front Speaker This option configures the front speakers to use when playing the source in the Dolby Digital listening mode. Select the speaker terminals to which the speakers you w ...

  • Integra DTR-10.5 - page 108

    108 Listening Mode Setup —Continued This sub-menu allows you to configure the audio ef fect and playback options when you play a source in the DTS listening mode. a. LFE Level This option allows you to set the bass le vel for the DTS listening mode. The LFE le vel setting made here will be applied to all of the DTS input signals. The a vailable ...

  • Integra DTR-10.5 - page 109

    109 Setup Menu Listening Mode Setup —Continued g. Surr Bk Speaker This option configures the surround back speakers to use when playing the source in the DTS listening mode. Select the speaker terminals to which the speakers you want to use are connected. This setting can be made when the “(Speaker B) Surr Back” is set to “Main A” in the ...

  • Integra DTR-10.5 - page 110

    110 Listening Mode Setup —Continued e. Center Speaker This option configures the center speaker to use when playing the source in the AAC listening mode. Select the speaker terminal to which the speaker you w ant to use is connected. This setting can be made when the “(Speaker B) Center” is set to “Main A” in the Speaker Configuration s ...

  • Integra DTR-10.5 - page 111

    111 Setup Menu Listening Mode Setup —Continued PLIIx Game: Plays a 2ch source as a 6.1 or higher channel source using the Dolby Pro Logic IIx Game mode. NEO:6 Cinema: Plays a 2ch source as a 6.1 or higher channel source using the DTS NEO:6 Cinema mode. NEO:6 Music: Plays a 2ch source as a 6.1 or higher channel source using the DTS NEO:6 Music mod ...

  • Integra DTR-10.5 - page 112

    112 Listening Mode Setup —Continued i. Surr L/R Sp This option configures the surround speakers to use when playing the source in the Dolby Pro Logic IIx or DTS NEO:6 listening modes. Select the speaker terminals to which the speakers you want to use are connected. This setting can be made when the “(Speaker B) Surr L/R” is set to “Main A? ...

  • Integra DTR-10.5 - page 113

    113 Setup Menu Listening Mode Setup —Continued Games Mode: In this new mode for the THX Ultra2, the DTR-10.5 plays 5.1ch game source as a 7.1 or higher channel source. c. THX Mode (2ch) This option allows you to select which THX mode the DTR-10.5 will use when applying the THX ef fect to the signal. THX Cinema: This mode is suitable for theater m ...

  • Integra DTR-10.5 - page 114

    114 Listening Mode Setup —Continued B: Outputs the source only from the subwoofer connected to the SUBWOOFER PRE OUT B terminal. A+B: Outputs the source from the subwoofers connected to the SUBWOOFER PRE OUT A and SUBWOOFER PRE OUT B terminals. Not Used: No subwoofers are used for playback. This sub-menu allows you to configure the audio ef fect ...

  • Integra DTR-10.5 - page 115

    115 Setup Menu Listening Mode Setup —Continued • When the settings for “(Speaker A) Surr Back” and “(Speaker B) Surr Back” in the Speaker Configuration sub-menu differ , the av ailable options will be “ A” and “B. ” A (Default): Outputs the source from the speakers connected to the SURR B A CK L/R SPEAKERS A terminals. B: Outpu ...

  • Integra DTR-10.5 - page 116

    116 Listening Mode Setup —Continued e. Surr Bk Speaker This option configures the surround back speakers to use when playing the source. Select the speaker terminals to which the speakers you want to use are connected. This setting can be made when the “(Speaker B) Surr Back” is set to “Main A” in the Speaker Configuration sub-menu. Ho ...

  • Integra DTR-10.5 - page 117

    117 Setup Menu Listening Mode Setup —Continued A+B: Outputs the source from the speakers connected to the SURR L/R SPEAKERS A and SURR L/R SPEAKERS B terminals. e. Subw oofer This option configures the subwoofer to use when playing the source. Select the terminal to which the subwoofer you want to use is connected. This setting can be made when ...

  • Integra DTR-10.5 - page 118

    118 A udio Adjust Y ou can adjust bass, mid, and treble notes for each speaker set. • For any speak er set to “Not Used” in the Speaker Configuration sub-menu, no associated setting item is displayed. Front Bass Option for adjusting bass notes from front L/R speakers. Specify at 1 dB interv als in a range from –12 dB to +12 dB. The def aul ...

  • Integra DTR-10.5 - page 119

    119 Setup Menu Preferences This menu allows you to configure the listening mode settings including audio ef fects and playback options. a. V olume Display Y ou can switch the volume indication between an absolute value and a relati ve value. Absolute (absolute value): Displayed in a range from 0 to 100. Relative (r elative v alue) (Default): Displ ...

  • Integra DTR-10.5 - page 120

    120 i.LINK Setup This menu can be used when connecting to an Integra i.LINK (A UDIO)-ready device. a. W akeup on i.LINK (IEEE1394) Specify connecting condition on standby of the DTR-10.5. Enable: T o be left connected. Disable (Default): T o be disconnected while the DTR-10.5 is on standby to sav e electricity . a. OSD for D VD Even when a D VD pla ...

  • Integra DTR-10.5 - page 121

    121 Setup Menu Netw ork Setup This menu appears when the ETHERNET terminal board [B] (f or Net A udio) is inserted. If using a broadband router (DHCP function), you need not perform “7. Network Setup” because the DHCP function on the DTR-10.5 is defaulted to “Enable. ” When the DHCP function for the broadband router is set to “Disable, ? ...

  • Integra DTR-10.5 - page 122

    122 Network Setup —Continued While the system sending information is called a server , the machine receiving the data is called a “client. ” Multiple clients can be connected to a single server . From the viewpoint of the Netw ork Audio Server , the DTR-10.5 is a client. a. Client Name Confirm the client name used on the Net-T une system. Th ...

  • Integra DTR-10.5 - page 123

    123 Setup Menu Loc k/V ersion Setup The following sub-menus allo w you to lock your settings or display the software version of the DTR-10.5. a. Lock Y ou can lock all of the setting menus to prev ent settings from being changed by mistake. Locked: Powering on and of f will resume the setting when it was locked, discarding an y modification that w ...

  • Integra DTR-10.5 - page 124

    124 Operating Integra/Onky o Products Using the Remote Contr oller The RC-556M remote controller is a useful tool that can operate not only the DTR-10.5, but also all the other com- ponents of your home theater . T o operate any component other than the DTR-10.5 with the RC-556M remote con- troller , press the [Mode] button and use the scroll wheel ...

  • Integra DTR-10.5 - page 125

    125 Using the Remote Controller Operating Integra/Onky o Products Using the Remote Contr oller —Continued 1 On button This button is used to turn on the D VD player . 2 Standby b utton This button is used to set the D VD player to Standby . 3 Number/letter buttons These buttons are used to enter title, chapter , and track numbers and to enter tim ...

  • Integra DTR-10.5 - page 126

    126 Operating Integra/Onky o Products Using the Remote Contr oller —Continued CD mode is used to control an Onkyo CD player con- nected to the DTR-10.5 via . T o select CD mode, press the [Mode] b utton, and then roll the scr oll wheel until “CD” appears on the display . Note: While neither the [Input] button nor [Mode] b utton is illuminated ...

  • Integra DTR-10.5 - page 127

    127 Using the Remote Controller Operating Integra/Onky o Products Using the Remote Contr oller —Continued F Play [ ] button This button is used to start CD playback. G Stop [ ] button This button is used to stop CD playback. H Random button This button is used with the random playback func- tion. I Memory button This button is used with the memor ...

  • Integra DTR-10.5 - page 128

    128 Operating Integra/Onky o Products Using the Remote Contr oller —Continued T ape mode is used to control an Onkyo cassette recorder connected to the DTR-10.5 via . T o select T ape mode, pr ess the scroll wheel, placing y our remote contr oller into “AMP” mode . Note: While neither the [Input] button nor [Mode] b utton is illuminated, roll ...

  • Integra DTR-10.5 - page 129

    129 Using the Remote Controller Using the Remote Contr oller with Other Components Y ou can use the DTR-10.5’ s remote controller (RC-556M) to control your other A V components, including those made by other manufacturers. T o do this you can: • Enter a remote control code for the component that you want to control (e.g., D VD, TV , VCR). • L ...

  • Integra DTR-10.5 - page 130

    130 Using the Remote Controller with Other Components —Continued Remote Control Codes When two or more codes are gi ven, try each one in turn, and choose the one that works best. D VD (D VD player) Manufacturer Control code Aiwa 5010 Akai 5019 Apex 5015, 5016 CyberHome 5027 Denon 5017, 5020 GE 5003 Hitachi 5009 Integra 5001, 5002 Integra Research ...

  • Integra DTR-10.5 - page 131

    131 Using the Remote Controller Using the Remote Controller with Other Components —Continued SA T (satellite tuner) Manufacturer Control code Universum 4021, 4024 V or tec 4017 Wela 4025 Zehnder 4020 Zenith 4032 CBL (cable receiver) Manufacturer Control code ABC 3001, 3002, 3021 Archer 3006 Cabletime 3028, 3032 Cable view 3004 Contec 3009 Eastern ...

  • Integra DTR-10.5 - page 132

    132 Using the Remote Controller with Other Components —Continued VCR Manufacturer Control code RCA 2001, 2002, 2003, 2008, 2010, 2013, 2021, 2023, 2025, 2026, 2027 Realistic 2007, 2008, 2010, 2011, 2012, 2017 Rex 2048 Roadstar 2033, 2043 Runco 2019 Saba 2040, 2048 Saisho 2028, 2041 Salora 2030 Samsung 2008, 2043, 2049 Sansui 2006, 2032 Sanyo 2007 ...

  • Integra DTR-10.5 - page 133

    133 Using the Remote Controller Using the Remote Controller with Other Components —Continued TV Manufacturer Control code Loewe 1014, 1040, 1055 Luxman 1004, 1006 LXI 1001, 1006, 1010, 1014, 1016, 1017, 1034 M Electronic 1035, 1053, 1062, 1063 Magnadyne 1040, 1067, 1068 Magnafon 1067 Magnav ox 1004, 1006, 1008, 1014, 1018, 1020 Marantz 1004, 1006 ...

  • Integra DTR-10.5 - page 134

    134 Using the Remote Controller with Other Components —Continued Controlling a Satellite T uner 1. Roll the scroll wheel to select the input sour ce and the remote contr oller mode for y our satellite tuner . Perform this operation while both the [Mode] and [Input] buttons are not illuminated. If you w ant to operate only the satellite tuner with ...

  • Integra DTR-10.5 - page 135

    135 Using the Remote Controller Using the Remote Controller with Other Components —Continued Controlling a TV 1. Roll the scroll wheel to select the input sour ce and the remote contr oller mode for y our TV . Perform this operation while both the [Mode] and [Input] buttons are not illuminated. If you w ant to operate only the TV without changing ...

  • Integra DTR-10.5 - page 136

    136 Using the Remote Controller with Other Components —Continued Y ou can teach the DTR-10.5 ’ s remote controller new commands simply by transmitting commands from another remote controller one at a time. For e xample, by transmitting the Play and Stop commands from your CD player ’ s remote controller, the DTR-10.5 ’ s remote controller c ...

  • Integra DTR-10.5 - page 137

    137 Using the Remote Controller Using the Remote Controller with Other Components —Continued W ith the Macro function you can program the remote controller to perform a sequence of actions with one press of a button. F or example, normally you need to perform the following actions to use a CD player that ’ s connected to the DTR-10.5: 1. Press ...

  • Integra DTR-10.5 - page 138

    138 Using the Remote Controller with Other Components —Continued Running Macros Programmed macros can be run as follows. Naming Macros Y ou can name your macros as follows. Names may con- tain of up to fi ve characters. 1 Press the [Macro] b utton. 2 Roll the scroll wheel to select the macro ’ s number , and then press the scroll wheel. The ac ...

  • Integra DTR-10.5 - page 139

    139 Using the Remote Controller Other Settings f or the Remote Contr oller Adding New Remote Contr oller Modes Y ou can add additional modes (D VD, TV , VCR, CBL, SA T) to the remote controller . This is useful if, for example, you ha ve se veral D VD players or TVs. Reordering the Remote Contr oller Modes Y ou can change the order in which the rem ...

  • Integra DTR-10.5 - page 140

    140 Other Settings for the Remote Contr oller —Continued Deleting Remote Controller Modes Y ou can delete remote controller modes that you don ’ t need, such as modes for components that you don ’ t hav e. The AMP mode cannot be deleted. Assigning Remote Controller Modes Y ou can change the combination in selecting the input source and remote ...

  • Integra DTR-10.5 - page 141

    141 Using the Remote Controller Other Settings for the Remote Contr oller —Continued Y ou can reset the remote controller to its default set- tings. Y ou can set the remote controller ’ s transmission signal format to either infrared (IR) or radio frequency (RF). The default setting is IR. This is useful when, for example, the DTR-10.5 is insta ...

  • Integra DTR-10.5 - page 142

    142 Other Settings for the Remote Contr oller —Continued This section explains ho w to change the remote control- ler ’ s ID. Y ou may need to change this if the DTR-10.5 ’ s remote controller interferes with other Integra/Onk yo components located in the same room. Note: If you change the remote controller ’ s ID, be sure to select the sam ...

  • Integra DTR-10.5 - page 143

    143 Miscellaneous Relationship Between Input Sour ce and Listening Mode A v ailable listening modes may differ depending on your re gion and the option board installed. Button Input Signal Format PCM Dolby Digital Dolby Digital/AA C AA C Analog Multichannel Multichannel ( */2) Multichannel (Other than */2) 2ch 1/0 1+1 5.1ch 7.1ch T ype of source Li ...

  • Integra DTR-10.5 - page 144

    144 Relationship Between Input Source and Listening Mode —Continued *2 NEO:6-96k Button Input Signal Format DTS DTS96/24 Discrete/ Matrix Multichanne l ( */2) Multichannel ( Other than */2) 2/0 1/0 Multichannel ( */2) Multichannel ( Other than */2) Matrix 2ch 1/0 T ype of source Listening mode D VD, LD, CD, etc. Direct Dir ect ✔✔✔✔✔✔? ...

  • Integra DTR-10.5 - page 145

    145 Miscellaneous Relationship Between Input Source and Listening Mode —Continued Button Input Signal Format i.LINK(IEEE1394):D VD-A udio i.LINK(IEEE1394): SA CD Multichannel ( */2) Multichannel ( Other than */2) 2/0 1/0 1+1 176.4/192 kHz Multichannel ( 3/2) 2/0 T ype of source Listening mode D VD-A udio Super A udio CD Direct Dir ect ✔✔✔? ...

  • Integra DTR-10.5 - page 146

    146 T r oubleshooting If you hav e any trouble using your DTR-10.5, look for a solu- tion in this section. If you can ’ t resolv e the issue yourself, con- tact the dealer from whom you purchased this unit. Can ’ t turn on the DTR-10.5? • Make sure that the po wer cord is properly plugged into the wall outlet and also make sure that the other ...

  • Integra DTR-10.5 - page 147

    147 Miscellaneous T roubleshooting —Continued Can ’ t get 6.1 or 7.1 playback? • If no surround back speakers are connected, or Zone 2/3 is being used, 6.1 and 7.1 playback is not possible. • If the “ SB Mode (5ch) ” is av ailable in any sub-menu of the “ Listening Mode Setup ” menu, make sure that it is not set to “ Off ” (page ...

  • Integra DTR-10.5 - page 148

    148 T roubleshooting —Continued Can ’ t record? • On your recorder , make sure the correct input is selected (e.g., digital or analog). • Make sure that proper output settings are made for the con- nected devices. Settings are a vailable in the “ Rec Out ” of the “ Audio Output Assign ” and “ V ideo Output Assign ” sub-menus und ...

  • Integra DTR-10.5 - page 149

    149 Miscellaneous T roubleshooting —Continued “ Not av ailable with Headphones use ” • Operation not allowed while a pair of headphones is con- nected. “ Not av ailable in this Sp Con fi g ” • Doesn ’ t work with the current speak er con fi guration. “ Only av ailable with Dolby D ” • Can be used with only Dolby Digital. “ ...

  • Integra DTR-10.5 - page 150

    150 Speci fi cations General Amplifier Section Power Supply Rating USA and Canadian models: AC 120 V , 60 Hz Australian models: A C 230-240 V , 50 Hz Consumption Power USA & Canadian models: 13.8 A Australian models: 1,200 W Standby Power Consumption: 3.9 W Dimensions (W × H × D): 435 × 220 × 480.5 mm (17 1/8" × 8 11/16" × 18 ...

  • Integra DTR-10.5 - page 151

    151 Miscellaneous Speci fi cations —Continued T uner Section FM AM Speci fi cations and features are subject to change without notice. Output Lev el and Impedance: A udio A UDIO 1-5: 200 mV , 470 Ω (T ape 1/2/ V ideo 1/2/3 Rec Out) 100 mV , 470 Ω (Zone 2/3 Out ( fi xed)) 1 V , 470 Ω (Zone 2/3 Out (variable)) PRE OUT A: 1 V , 470 Ω (Fro ...

  • Integra DTR-10.5 - page 152

    SN 29343684 (C) Copyright 2004 ONKY O CORPORA TION Japan. All rights reser ved. Printed in Japan D0410-1 Integra Division of ONKYO U.S.A. CORPORATION 18 park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.integrahometheater.com Integra Division of ONKYO CORPORATION Sales & Product Planning Div.: 2-1, ...

Manufacturer Integra Category Stereo Receiver

Documents that we receive from a manufacturer of a Integra DTR-10.5 can be divided into several groups. They are, among others:
- Integra technical drawings
- DTR-10.5 manuals
- Integra product data sheets
- information booklets
- or energy labels Integra DTR-10.5
All of them are important, but the most important information from the point of view of use of the device are in the user manual Integra DTR-10.5.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Integra DTR-10.5, service manual, brief instructions and user manuals Integra DTR-10.5. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Integra DTR-10.5.

Similar manuals

A complete manual for the device Integra DTR-10.5, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Integra DTR-10.5 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Integra DTR-10.5.

A complete Integra manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Integra DTR-10.5 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Integra DTR-10.5, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Integra DTR-10.5, that we can find in the current document
3. Tips how to use the basic functions of the device Integra DTR-10.5 - which should help us in our first steps of using Integra DTR-10.5
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Integra DTR-10.5
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Integra DTR-10.5 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Integra DTR-10.5?

Use the form below

If you did not solve your problem by using a manual Integra DTR-10.5, ask a question using the form below. If a user had a similar problem with Integra DTR-10.5 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)