English dropdown-ico

Manual Snapper 7800787

36 pages 3.08 mb
Download

Go to site of 36

Summary
  • Snapper 7800787 - page 1

    Operator's Manual Manual No. 7104742 (Rev . ‘-’) REAR ENGINE RIDING MO WER SERIES 24 Mo d el No .D es cription 7800784 2811524BV 7800785 2812524BVE 7800786 3014524BVE 7800787 3317524BVE ! Not for Reproduction ...

  • Snapper 7800787 - page 2

    Thank You for purchasing this quality-built Snapper product. W e’re pleased that you placed your confidence in the Snapper brand. When operated and maintained according to the instructions in this manual, your Snapper product will provide many years of dependable service. This manual contains safety information to make you aware of the hazards an ...

  • Snapper 7800787 - page 3

    3 Table of Contents Operator Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Features and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Snapper 7800787 - page 4

    www.snapper.com 4 ! WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and ...

  • Snapper 7800787 - page 5

    5 Protection against Tipovers (Continued From Previous Column) 7. Keep people and pets out of mowing area. Immediately STOP blades, STOP engine, and STOP machine if anyone enters the area. 8. Check shields, deflectors, switches, blade controls and other safety devices frequently for proper operation and location. 9. Make sure all safety decals are ...

  • Snapper 7800787 - page 6

    www.snapper.com 6 Towing 1. T ow only with a machine that has a hitch designed for towing. DO NOT attach towed equipment except at the hitch point. 2. Follow the manufacturer’ s recommendation for weight limits for towed equipment and towing on slopes. 3. DO NOT allow children or others on towed equipment. 4. On slopes, the weight of the towed eq ...

  • Snapper 7800787 - page 7

    7 Operator Safety Remove Battery - 7101109 Safety Panel - 7101111 Before Starting - 7101112 Fi r e Haza rd . Operation of this equipment may create sparks that can start fires around dry vegetation. A spark arrestor may be required. The operator should contact local fire agencies for laws or regulations relating to fire prevention requirements. W A ...

  • Snapper 7800787 - page 8

    www.snapper.com 8 Operator Safety Reverse Lockout - 7104796 7104796 Parking Brake - 7103219 7103219 Use only rechargeable valve regulated (sealed) non-spillable batteries in this product. Battery must be factory approved part or equivalent. Do not overcharge. 7105102 IMPOR T ANT Non-Spillable Battery - 7105102 W ARNING A VOID SERIOUS INJURY OR DEA ...

  • Snapper 7800787 - page 9

    9 IMPORTANT The figures and illustrations in this manual are provided for reference only and may differ from your specific model. Contact your dealer if you have questions. Features and Controls A. Engine Speed Control B. Cutting Height Lever C. Ignition Switch D. Clutch/Brake Pedal E. Park Brake Latch F . Blade Pedal G. Blade Lever H. Steering Whe ...

  • Snapper 7800787 - page 10

    www.snapper.com 10 Before Starting Make the following checks and perform the ser vice required before each start-up: 1. Check the tire pressure; add or release air as needed to bring pressure to 15 PSI in front and 12 PSI in rear . 2. Check guards, deflectors and covers to make sure all are in place and securely tightened. 3. Check engine oil and a ...

  • Snapper 7800787 - page 11

    11 Starting and Operation Engine (Electric Start) IMPORTANT: When the ignition key is turned to “ST ART”, the engine will turn over , but will not start unless the Clutch/Brake pedal is pressed all the way down, and the Blade Lever is in the “OFF” position. The operator should be in the seat. Start the engine as follows: 1. Move the transmi ...

  • Snapper 7800787 - page 12

    www.snapper.com 12 Starting and Operation (Continued) Engine (Electric Start) (Continued) 8. Should the batter y be too weak to start the engine, refer to the Section entitled “Engine (Manual Start)” to manually start the electric start engines. 9. On Model 3317524BVE, the engine is equipped with a fuel shut-off solenoid. If the battery is dead ...

  • Snapper 7800787 - page 13

    13 Starting and Operation (Continued) Mower Blade 1. With the engine running, move the engine speed control to the “F AST” position. 2. Move the blade lever (A, Figure 10) for ward to the “ON” position, then depress the blade pedals (B) to hold the blade lever in the “ON” position. Wheel Drive 1. With the engine running, adjust the engi ...

  • Snapper 7800787 - page 14

    www.snapper.com 14 Stopping - Engine, Wheel Drive, Blade Engine 1. Stop the engine by turning the key (A, Figure 13) to the “OFF” position. Wheel Drive 1. Stop motion of the Rear Engine Rider by pushing the clutch/brake pedal (A, Figure 14) all the way down to apply the brake. Mower Blade 1. Stop the mower blade by releasing the blade pedals (A ...

  • Snapper 7800787 - page 15

    15 Stopping - Engine, Wheel Drive, Blade (Continued) Park Brake 1. T o set the park brake, press the clutch/brake pedal (A, Figure 16) all the way down, slide the park brake latch (B) all the way in to the engaged position, and release the clutch/brake pedal. A detent in the park brake latch will keep the park brake engaged. 2. Release the park bra ...

  • Snapper 7800787 - page 16

    www.snapper.com 16 Reverse Lockout Mechanism Data indicates that tragic back-over accidents occur each year . These accidents usually involve unsuper vised children. Many times these children have been given rides on the machine and have been trained to view this potentially dan- gerous piece of machinery as fun rather than being taught how to avoi ...

  • Snapper 7800787 - page 17

    17 Maintenance Maintenance Chart TRACTOR AND MOWER Every 8 Hours or Daily Check saf ety interlock sy stem Clean debris off tractor and mo wer deck Clean debris from engine compartment Every 25 Hours or Annually * Check tire pres sure Check mow er blade stopping time Check tractor/mow er for loose hardw are Every 50 Hours or Annually * Clean batt er ...

  • Snapper 7800787 - page 18

    www.snapper.com 18 Maintenance Introduction Contact a local dealer for parts and service assistance. For the correct part or information for a particular Rear Engine Riding Mower , always mention the model and serial number . We recommend returning the Rear Engine Rider to an authorized dealer annually for inspection and addition of any new devices ...

  • Snapper 7800787 - page 19

    19 Check the Blade Drive Belt The blade drive consists of a single belt from the engine to the deck. Inspect for signs of deterioration and proper ten- sion. 1. Lower the deck to the lowest setting. 2. Remove the four self-tapping screws (A, Figure 21) , two on each side of mower drive belt cover (B) . 3. Slide the cover back and rotate out on the ...

  • Snapper 7800787 - page 20

    www.snapper.com 20 Maintenance Safety Interlock System Checks Engine must not start if: 1. The Clutch/Brake Pedal is not fully depressed OR, 2. The Blade Control is in the “ON” (blades engaged) posi- tion. Engine should start if: 1. The Blade Control is in the “OFF” (blades disengaged) position AND, 2. The Clutch/Brake Pedal is fully depres ...

  • Snapper 7800787 - page 21

    21 Mower Deck Levelness Check the mower deck for proper level. Adjust as required. Refer to the section entitled “MOWER DECK ADJUSTMENT – LEVELNESS”. Clean Mower Deck 1. Follow the WARNING statement found on this page. 2. Carefully stand the Rear Engine Rider on the rear bumper . (See statement below.) 4. Clean the underside of the mower deck ...

  • Snapper 7800787 - page 22

    www.snapper.com 22 Maintenance Rear Axle Bearing - Lubrication 1. The grease fitting (A, Figure 27) on the left rear axle bearing requires three shots of general purpose grease from grease gun. 2. The right rear axle bearing is lubricated by the differential lubricant and requires no grease. Differential / Chain Case - Lubrication 1. Stand the rear ...

  • Snapper 7800787 - page 23

    23 Engine Perform all maintenance as specified in the Maintenance Chart in this manual. Fuel Filter IMPORTANT: Service the fuel filter on a COLD ENGINE ONL Y! 1. Drain the fuel from the fuel tank. 2. Start the engine and allow it to run until the engine runs out of fuel. 3. Remove the hose clamps (B, Figure 30) from the fuel filter (A) . 4. Remove ...

  • Snapper 7800787 - page 24

    www.snapper.com 24 Maintenance Engine Adjustments and Repair Refer to the engine manual for those adjustments and/or repairs that can be made by the owner . Mower Deck and Component Adjustments The following mower deck and component adjustments and repairs can be made by the owner . However , if there is difficulty in achieving these adjustments an ...

  • Snapper 7800787 - page 25

    25 Mower Deck Adjustment (Side-To-Side Levelness) Before making deck leveling adjustments, check the tire pressure. Front tires 15 PSI, rear tires 12 PSI. If tires are properly inflated and mowing is still uneven, adjust side-to- side deck levelness. 1. Place the Rider on a smooth level surface. 2. T urn the engine off and remove the key . Remove t ...

  • Snapper 7800787 - page 26

    www.snapper.com 26 Maintenance Mower Drive Belt Adjustment (For 28” & 30” Decks Only) 1. Remove the mower drive belt cover . Refer to the sec- tion entitled “CHECK MOWER DRIVE BEL T”. 2. Move the blade lever up and over to the “ON” position. 3. Place the deck cutting height lever in the third position (middle notch). Measure the bel ...

  • Snapper 7800787 - page 27

    27 Rear Engine Rider Drive Components Service Brake / Park Brake Adjustment T est the wheel brake on a dr y concrete surface. When prop- erly adjusted, the Rear Engine Rider will stop within 5 feet from fastest speed. If stopping distance is more than 5 feet, the wheel brake should be adjusted as follows: 1. Follow the WARNING statement found on th ...

  • Snapper 7800787 - page 28

    www.snapper.com 28 Maintenance Mower Blade Replacement Blade Wear Limits 1. Inspect the blade frequently for signs of excessive wear or damage (Figure 41) : (A) New blade; (B) Wear limit (notch starts); (C) Dangerous condition - do not use on mower! Replace with new blade. Blade Sharpening 1. Follow the WARNING statement found on this page. 2. Care ...

  • Snapper 7800787 - page 29

    29 Mower Drive Belt Replacement Inspect the mower drive belt as described in the section, “CHECK MOWER DRIVE BEL T”. Replace the belt if signs of excessive wear and/or damage are present. Belt Removal 1. Remove the mower drive belt cover . Refer to the section entitled “DRIVE BEL T COVER REMOVAL”. 2. Remove the old belt. Belt Replacement 1. ...

  • Snapper 7800787 - page 30

    www.snapper.com 30 Maintenance Battery Battery Removal 1. Carefully pull each side of the battery cover (A, Figure 47) away from the ratchet fasteners (B) and remove the cover . 2. Remove the hardware (A, F igure 48) securing the battery holddown bracket (B) , and remove the bracket. 3. Disconnect the BLACK (Negative) cable (C, F igure 49) from the ...

  • Snapper 7800787 - page 31

    31 Battery Charging A. Place the battery in a well-ventilated area. B. Connect a 12-volt constant - voltage battery charger to the battery terminals; RED to positive (+) and BLACK to negative (-) terminal. C. Charge the battery for 2 to 4 hours. Battery Storage If the mower is to be stored out of season on its rear bumper , it is recommended the ba ...

  • Snapper 7800787 - page 32

    www.snapper.com 32 Troubleshooting PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Engine Will Not Start Using Recoil Starter 1. Fuel tank empty . 1. Fill fuel tank with fresh fuel to proper level. 2. Engine needs choking. 2. Move choke control to “CHOKE” position. 3. Spark plug wire disconnected. 3. Place spark plug wire onto spark plug. 4. Faulty pa ...

  • Snapper 7800787 - page 33

    33 Troubleshooting PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Rider Will Not Move Or Loss of T raction 1. Drive disc worn or damaged. 1. Replace drive disc. 2. Rubber drive disc is not tracking properly on drive disc. 2. Adjust rubber drive disc. 3. T apered axle bolt and nut missing. 3. Replace with tapered bolt & nut. 4. Axle bearing seized. 4. ...

  • Snapper 7800787 - page 34

    www.snapper.com 34 Warranty BRIGGS & STRA TTON POWER PRODUCTS GROUP , L.L.C. OWNER W ARRANTY POLICY LIMITED W ARRANTY Briggs & Stratton Power Products Group, LLC will repair and/or replace, free of charge, any part(s) of the equipment that is defective in material or workmanship or both. Briggs & Stratton Corporation will repair and/or ...

  • Snapper 7800787 - page 35

    35 Slope Guide Not for Reproduction ...

  • Snapper 7800787 - page 36

    www.snapper.com REAR ENGINE RIDING MOWER SERIES 24 Pow er R ating The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & T orque Rating Procedure), and rating per formance has been obtained and corrected in accordance with SAE J1995 (Revision 2 ...

Manufacturer Snapper Category Lawn Mower

Documents that we receive from a manufacturer of a Snapper 7800787 can be divided into several groups. They are, among others:
- Snapper technical drawings
- 7800787 manuals
- Snapper product data sheets
- information booklets
- or energy labels Snapper 7800787
All of them are important, but the most important information from the point of view of use of the device are in the user manual Snapper 7800787.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Snapper 7800787, service manual, brief instructions and user manuals Snapper 7800787. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Snapper 7800787.

Similar manuals

A complete manual for the device Snapper 7800787, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Snapper 7800787 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Snapper 7800787.

A complete Snapper manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Snapper 7800787 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Snapper 7800787, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Snapper 7800787, that we can find in the current document
3. Tips how to use the basic functions of the device Snapper 7800787 - which should help us in our first steps of using Snapper 7800787
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Snapper 7800787
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Snapper 7800787 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Snapper 7800787?

Use the form below

If you did not solve your problem by using a manual Snapper 7800787, ask a question using the form below. If a user had a similar problem with Snapper 7800787 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)