English dropdown-ico

Manual Linksys WIP330

99 pages 11.13 mb
Download

Go to site of 99

Summary
  • Linksys WIP330 - page 1

    A Division of Cisco Systems, Inc . ® User Guide Model No . WIP330 IP Phone Wir eless- G Voice ...

  • Linksys WIP330 - page 2

    ...

  • Linksys WIP330 - page 3

    Wireless-G IP Phone Copyright and T r ademarks Specificat ions are subject t o change without notice. Linksys is a registered trademar k or trademark o f Cisco Systems, Inc . and/or its affiliates in the U.S . and certain other countries. Copyright © 2005 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or reg ...

  • Linksys WIP330 - page 4

    Wireless-G IP Phone ...

  • Linksys WIP330 - page 5

    Wireless-G IP Phone Table of Contents Chapter 1: Introduction 1 Welcome 1 What’s in This User Guide? 1 Chapter 2: Getting to Know the Wireless-G IP Phone 3 The Bottom Panel 3 The Front and Side Panels 4 The Back Panel 6 Chapter 3: Installing and Us ing the Wireless-G IP Phone 7 Overview 7 Inserting the Battery into the Wireless-G IP Phone 7 Power ...

  • Linksys WIP330 - page 6

    Wireless-G IP Phone List of Figures Figure 2-1: Bottom Panel 3 Figure 2-2: Front Panel 4 Figure 2-3: Symbol Selection 5 Figure 2-4: Side Panel 6 Figure 2-5: Back Panel 6 Figure 3-1: Press the Button 7 Figure 3-2: Insert the Battery 7 Figure 3-3: Connect the Power 8 Figure 3-4: Front Panel 10 Figure 3-5: Symbol Selection 11 Figure 3-6: Scan for Wire ...

  • Linksys WIP330 - page 7

    Wireless-G IP Phone Figure 4-13: Enter Name 33 Figure 4-14: Select Network Settings 34 Figure 4-15: Network Settings - DHCP 34 Figure 4-16: Network Settings - Fixed IP 35 Figure 4-17: Enter IP Address 35 Figure 4-18: Edit Subnet Mask 3 5 Figure 4-19: Enter Subnet Mask 35 Figure 4-20: Wireless 36 Figure 4-21: Scanning for Wireless Networks 36 Figure ...

  • Linksys WIP330 - page 8

    Wireless-G IP Phone Figure 4-65: Edit Download URL 51 Figure 4-66: Upgrade in Progress 51 Figure 4-67: Upgrade Successful 51 Figure 4-68: Edit Proxy IP 52 Figure 4-69: Enter Proxy IP 52 Figure 4-70: Enter Register Proxy IP 52 Figure 4-71: Enter Register Proxy Port 52 Figure 4-72: Change Outbound Proxy IP 53 Figure 4-73: Edit Outbound Proxy Port 53 ...

  • Linksys WIP330 - page 9

    Wireless-G IP Phone 1 Chapter 1: Introduction Welcome Chapter 1: Introduction W elcome Thank you for choosing the Lin ksys Wireless-G IP Phone . It will allow you to make phone calls using your broadband connection, whether yo u are at home , in your office , or at a public hotspot. How does the I P Phone do this? It co nnects to your wirele ss rou ...

  • Linksys WIP330 - page 10

    Wireless-G IP Phone 2 Chapter 1: Introduction What’s in This User Guide? • Chapter 2: Getting to Know the Wireless- G IP Phone This chapter describes the physical features of the IP Phone. • Chapter 3: Installing and Us ing the Wireless-G IP Phone This chapter explains how to install the IP Phone and use it. • Chapter 4: Configuring the Wir ...

  • Linksys WIP330 - page 11

    Wireless-G IP Phone 3 Chapter 2: Getting to Know the Wireless-G IP Phone The Bottom Panel Chapter 2: Getting to Know the Wireless-G IP Phone The Bottom P anel The IP Phone’s headset jack and USB po rt ar e located on the bo ttom panel. Headset Jack This jack allows you to connect a headset. USB Port The USB port allows you to attach the included ...

  • Linksys WIP330 - page 12

    Wireless-G IP Phone 4 Chapter 2: Getting to Know the Wireless-G IP Phone The Front and Side Panels The Front and Side P anels The power LED is located at the top of the IP Phone, while its buttons are located on the front and side panels. Power LED Blue/Red/Purple. The LED is a solid blue when the IP Phone is powered on and ready for phone calls. I ...

  • Linksys WIP330 - page 13

    Wireless-G IP Phone 5 Chapter 2: Getting to Know the Wireless-G IP Phone The Front and Side Panels P ower or End Call Press and hold this button for two seconds to power the IP Phone on or off . Ends the call or exits the current menu Different Key Choices or + Sign T o enter an entry or setting, use the keypad . Keys 1-9 can represent uppercase le ...

  • Linksys WIP330 - page 14

    Wireless-G IP Phone 6 Chapter 2: Getting to Know the Wireless-G IP Phone The Back Panel The Back P anel The IP Phone’s battery compartment is located on the back panel of the IP Phone . For direction s on how to insert the battery , refer to “Chapter 3: Installing and Using the Wireless-G IP Phone . ” Vol um e Increases or decreases the volum ...

  • Linksys WIP330 - page 15

    Wireless-G IP Phone 7 Chapter 3: Installing and Using the Wireless-G IP Phone Overview Chapter 3: Installing and Using the Wireless-G IP Phone Overview This chapter provides instructions for first-time installation and use of the IP Phone . Y ou will insert the battery into the IP Phone and then set it up for your wireless network and Inter net pho ...

  • Linksys WIP330 - page 16

    Wireless-G IP Phone 8 Chapter 3: Installing and Using the Wireless-G IP Phone Powering on the Wireless-G IP Phone P owering on the Wireless-G IP Phone Make sure you have the account information, including ne cessar y IP Phone settings, supplied by your Internet phone service provider . If you alread y have an account set up with your Internet phone ...

  • Linksys WIP330 - page 17

    Wireless-G IP Phone 9 Chapter 3: Installing and Using the Wireless-G IP Phone Powering on the Wir eless-G IP Phone 3. The power LED will fl ash, alternat ing between blue and purple . For the initial charge, allo w the battery to charge for at least 10 hours, so the battery will have a full charge , which is indicated by a solidly lit power LED . T ...

  • Linksys WIP330 - page 18

    Wireless-G IP Phone 10 Chapter 3: Installing and Using the Wireless-G IP Phone Navigating the Wireless-G IP Phone Navigating the Wi reless-G IP Phone Review the descriptions of the buttons you will use to navigate menus and select your choices. Icon Button Name Function Soft Key Press the left or right soft key to select the appropriate action show ...

  • Linksys WIP330 - page 19

    Wireless-G IP Phone 11 Chapter 3: Installing and Using the Wireless-G IP Phone Navigating the Wireless-G IP Phone For more deta ils, refer to “Chapter 2: Getting to Know the Wireless-G IP Phone . ” Proceed to “Setting up the Wireless-G IP Phone. ” Different Key Choices or + Sign T o enter an entry or setting, use the keypad . Keys 1-9 can r ...

  • Linksys WIP330 - page 20

    Wireless-G IP Phone 12 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone Setting up the Wire less-G IP Phone Before you begin, make sure your network has an active Inter net connection. 1. Press and hold the Po we r button for two seconds. 2. The IP Phone will boot up and automa tically scan for wireless net ...

  • Linksys WIP330 - page 21

    Wireless-G IP Phone 13 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 4. The IP Phone will au tomatically co nnect to the network you have selected. If WEP security is enabled on the selecte d network, a new screen will appear . Using the navigation pad, select the appropriate transmit key number and then ...

  • Linksys WIP330 - page 22

    Wireless-G IP Phone 14 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 6. The standby screen will appear . Select Menu . 7. Phone Settings will be highlighted. Na vigate the menu choices, and then se lect SIP Settings . (SIP stands for Session Initiati on Protocol.) Figure 3-12: Select Menu Figure 3-13: Se ...

  • Linksys WIP330 - page 23

    Wireless-G IP Phone 15 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 8. A list of SIP settings will be displa yed. For the Proxy IP setting, select Ed it . 9. Enter the Proxy IP address in the new wind ow , and then press the center selection key . Figure 3-14: Edit Proxy IP NOTE: The Proxy IP addr ess a ...

  • Linksys WIP330 - page 24

    Wireless-G IP Phone 16 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 10. Scroll down to Pr oxy Port, and select Edit . 11. Enter the Proxy Port number address in the new window , and then press the center selection key . 12. Scroll down to Regist er Proxy IP , and select Edit . 13. Enter the Register Pro ...

  • Linksys WIP330 - page 25

    Wireless-G IP Phone 17 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 14. Scroll down to Register Proxy Port, and select Edit . 15. Enter the Register Proxy Port number in the new window , and then press the center selection key . 16. Scroll down to Outbound Proxy IP , and select Edit . 17. Enter the Outb ...

  • Linksys WIP330 - page 26

    Wireless-G IP Phone 18 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 18. Scroll down to Outbound Proxy Port, and select Edit . 19. Enter the Outbound Proxy Port number in the new window , and then press the center selection key . 20. If your Intern et phone service provider did not provide an Expire Time ...

  • Linksys WIP330 - page 27

    Wireless-G IP Phone 19 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 22. Scroll down to Phone Number , and select Edit . 23. Enter the Phone Number you will use for Internet ph one calls, and then press the center selectio n key . 24. Scroll down to Us er Name , and select Ed it . 25. Enter the User Name ...

  • Linksys WIP330 - page 28

    Wireless-G IP Phone 20 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 26. Scroll down to Password, and select Edit . 27. Enter the Password, and then press the center selection key . 28. On the SIP Settings screen, select Return . Figure 3-24: Save Pa s s w o rd Figure 3-25: Sav e SIP Settings ...

  • Linksys WIP330 - page 29

    Wireless-G IP Phone 21 Chapter 3: Installing and Using the Wireless-G IP Phone Setting up the Wireless-G IP Phone 29. On the main menu, select Return . 30. The standby screen will indicate that the IP Phone is ready for phone call s. The installation of the Wireless-G IP Ph one is co mplete. Proceed to the next section, “Using the Wireless-G IP P ...

  • Linksys WIP330 - page 30

    Wireless-G IP Phone 22 Chapter 3: Installing and Using the Wireless-G IP Phone Using the Wireless-G IP Phone Using the Wireless-G IP Phone T o make a call, enter the phone number you wa nt to call. Then press the Call button. When you are on a phone call, select Option to see a list of menu choices. Sele ct HangUp to end the call. T o change the vo ...

  • Linksys WIP330 - page 31

    Wireless-G IP Phone 23 Chapter 3: Installing and Using the Wireless-G IP Phone Using the Wireless-G IP Phon e Blind TFR . For a blind transfer , select Blind TFR . Dial the number to whi ch you want to tr ansfer the call. Select Blind TFR again. Then hang up. When you are on your call, select Blind TFR . A new window will appear . Enter the phone n ...

  • Linksys WIP330 - page 32

    Wireless-G IP Phone 24 Chapter 3: Installing and Using the Wireless-G IP Phone Using the Wireless-G IP Phone ...

  • Linksys WIP330 - page 33

    Wireless-G IP Phone 25 Chapter 4: Configuring the Wireless-G IP Phone Instructions f or Configuring the Wireless -G IP Phone Chapter 4: Configuring the Wireless-G IP Phone Instructions for Configuring the Wireless-G IP Phone Follow these instructions to configure the IP Phon e’s settings. Y ou will use these buttons to navigate menus and select y ...

  • Linksys WIP330 - page 34

    Wireless-G IP Phone 26 Chapter 4: Configuring the Wireless-G IP Phone Instructions for Configuring the Wi reless-G IP Phone Different Key Choices or + Sign T o enter an entry or setting, use the keypad . Keys 1-9 can represent uppercase letters (A, B, C), lower case letters (a, b , c), or numbers (1, 2, 3). Press the * (star) key to switch between ...

  • Linksys WIP330 - page 35

    Wireless-G IP Phone 27 Chapter 4: Configuring the Wireless-G IP Phone Status Information Status Information The standby screen will display a variety of informa tion about the IP Phone. Wireless Signal Strength At the top of the screen, the icon on the left indicates wireless signal strength. Tim e D i sp l a y The current time is shown. T o change ...

  • Linksys WIP330 - page 36

    Wireless-G IP Phone 28 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Wireless Network Name The screen displays the name of the wi reless network used by the IP Phone . Internet Phone Number The Internet ph one number of the IP Phone is shown. Menu Press the left soft key button to vi ew the main menu. Its choice ...

  • Linksys WIP330 - page 37

    Wireless-G IP Phone 29 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Call Log Scroll through these choices and press the left soft key to make a selection. Select Re turn to retur n to the previous menu. Missed A list of missed calls will be displayed. Scroll through the calls to select the call you want. Select ...

  • Linksys WIP330 - page 38

    Wireless-G IP Phone 30 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone If the phone num ber is alread y in the Phone Book, select Modify PhoneBook to modify its entry in the Phone Book. The Phone Book screen will automatically appear . Follow the instructions fo r the Phone Book settings. Received A list of receiv ...

  • Linksys WIP330 - page 39

    Wireless-G IP Phone 31 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Dial ed A list of dialed calls will be di splayed. Select Option to see menu choices for t he selected call. Sele ct Return to return to the previous menu. Option Y ou have these ch oices: Dial (a vailab le when you hav e contacts in th e Phone ...

  • Linksys WIP330 - page 40

    Wireless-G IP Phone 32 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Phone Book Y ou will see a li st of contacts (when you have contac ts in the Phone Book). T o search for an entry , enter the contact’s name in the field provided. The appropriate entry will be selected. Select Option to see menu choices. Sel ...

  • Linksys WIP330 - page 41

    Wireless-G IP Phone 33 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Add . Select Add to add a new contact. Scroll through the diff erent settings: Name , Home Number , Office Number , Mobile Number , Home-2 Number , Office-2 Nu mber , Mobile-2 Number , Speed-Dial Number , Ring T one, and E-Mail. For each settin ...

  • Linksys WIP330 - page 42

    Wireless-G IP Phone 34 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Network Settings Y ou have two IP Modes available , DHCP and Fixed IP . In most cases, you should keep the default setting, DHCP , if your network router or gateway will assi gn IP addresses to the IP Phone . If you w ant to assign a static IP ...

  • Linksys WIP330 - page 43

    Wireless-G IP Phone 35 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Fixed IP If Fixed IP is selected as the IP Mode, the screen will show these settings: IP A ddress, Subnet Mask, Default Gateway , Primar y DNS, and Secondary DNS. IP Address . T o add or change the IP Address, select Edit . Enter the new IP Add ...

  • Linksys WIP330 - page 44

    Wireless-G IP Phone 36 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Wireless Y ou have three choices, Set Wi-Fi, Profiles, and Hotspo t. If you w ant to scan for wireless netw orks in your local area, select Set Wi-F i . If you want to set configuration profiles for different network setups, select Profiles . T ...

  • Linksys WIP330 - page 45

    Wireless-G IP Phone 37 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone 2. The IP Phone will au tomatically co nnect to the network you have selected. WEP Security If WEP security is enabled on the selecte d network, a new screen will appear . Using the navigation pad, select the appropriate tr ansmit key number an ...

  • Linksys WIP330 - page 46

    Wireless-G IP Phone 38 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Connection to a Default Hotspot Before you begin, make sure you have saved your User Name and Password for the default hotspot you want to use . These login settings can be configured through the Hotspot screen. 1. Scroll through the choices, a ...

  • Linksys WIP330 - page 47

    Wireless-G IP Phone 39 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Connection to a New Hotspot 1. Scroll through the choices, and press the center selection key (in the middle of the navigation pad) to select th e wireless hotspot you want to use . If the hotspot you want is not shown, select Rescan for a new ...

  • Linksys WIP330 - page 48

    Wireless-G IP Phone 40 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Profiles Y ou will see a list of profiles (when you have profiles already configured). Select Option to see menu choices. Select Exit to return to the previous menu. Y ou can designate the order of the profiles saved by the IP Phone . The next ...

  • Linksys WIP330 - page 49

    Wireless-G IP Phone 41 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Authentication Mode . Y ou have a choice of Auto Switch , Share Key , Open System, and WP A- PSK. T o change the Authentication Mode , select Edit . A new window will open. Scr oll through the modes, and select the ap propriate mode . Select Sa ...

  • Linksys WIP330 - page 50

    Wireless-G IP Phone 42 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone WP A-PSK WP A Key . T o enter the WP A Key , select Edit . Enter the new WPA Key in the new window . Press the center se lection key to sav e the new WP A Key , or select Exit to return to the previous menu. EAP T ype . T o change the EAP T ype ...

  • Linksys WIP330 - page 51

    Wireless-G IP Phone 43 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Auto Switch, Share K ey , or Open System Encryption . Y ou have a choice of Disabled and WEP encr yp tion. T o change the Encryption method, select Edit . If you select Disabled, there are no other settings to change . If you select WEP , there ...

  • Linksys WIP330 - page 52

    Wireless-G IP Phone 44 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone EAP T ype . T o change the EAP T ype setting, select Edit . Y ou have a choice of TL S, MD5, and PEAP . Select Save to save the new EAP T ype, or select Exit to return to the Add Profile menu without changing the EAP Ty p e . Hotspot . If you h ...

  • Linksys WIP330 - page 53

    Wireless-G IP Phone 45 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Hotspot Y ou will see a li st of the IP Phone’ s default hotspots. Scroll through these choices and press the left soft key to make a selection. Select Return to return to the Wireless screen. User Name . T o change the User Name, select Ed i ...

  • Linksys WIP330 - page 54

    Wireless-G IP Phone 46 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Phone Settings Y ou can customize the settings of the IP Phone . Y ou have these choices: Ring Option, Keypad T one, Wallpaper , Date & T ime , Language , Ph one Password, and Upgrade . Select Return to r eturn to the previous menu. Ring Op ...

  • Linksys WIP330 - page 55

    Wireless-G IP Phone 47 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Keypad T o ne T o hear the actual keypad tone , scroll through these choi ces: Off , Soft, and Loud. The selected keypad tone is indicated by the <*> symbol. Highlight the keypad tone you want to select, and then press the center selectio ...

  • Linksys WIP330 - page 56

    Wireless-G IP Phone 48 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Date & Time Y ou have six choices: Date , Clock, Time Format, Clock T y pe , T ime Zone , and NTP Server . Select Exit to return to the previous menu. Date . Press the left soft key to select the Date sett ing . A new window will be display ...

  • Linksys WIP330 - page 57

    Wireless-G IP Phone 49 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Tim e Z o ne . Press the left soft key to select the Time Zone setting . A list of multiple time zones will be displayed. The selected time zone is indicate d by the <*> symbol. Scroll through these choices, and highlight the time zone. T ...

  • Linksys WIP330 - page 58

    Wireless-G IP Phone 50 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Language The selected language is indicated by the <*> symbo l. Highlight the language you want to select, and then press the left soft ke y to save your change . Select Exit to ret urn to the Phone Settings menu without changing the lang ...

  • Linksys WIP330 - page 59

    Wireless-G IP Phone 51 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Upgrade Use this screen to upgrade the firmware of the IP Phone. The IP Phone is pre-configured with the co rrect Download URL (web address of the download site) and OS Image File (firmware upgrade file) entries. Plug the USB mini-B connector o ...

  • Linksys WIP330 - page 60

    Wireless-G IP Phone 52 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone SIP Settings SIP settings are used to configure your Internet phone service. The necessary setup information is supplied by your Internet phone service provider . If you do not have this inform ation, contact your Internet phone ser vice provid ...

  • Linksys WIP330 - page 61

    Wireless-G IP Phone 53 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Register Proxy P ort . T o add or change the Register Proxy Port number , select Edit . Enter the new Register Proxy Port number in th e new window . Press the center selection key to save the new setting, or select Exit to return to the previo ...

  • Linksys WIP330 - page 62

    Wireless-G IP Phone 54 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone User Name . T o add or change the User Name, select Edit . Enter the new User Name in the new window . Press the center selection key to save the new setting, or s elect Exit to return to the previous screen. Pa s s w o rd . T o add or change t ...

  • Linksys WIP330 - page 63

    Wireless-G IP Phone 55 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Web S i t e A list of web sites (if saved) will be shown. Scroll through these choices and press the center selection key to visit the web si te you wa nt. T o save fr equent ly visited web sites, select Option to see menu choices, which will b ...

  • Linksys WIP330 - page 64

    Wireless-G IP Phone 56 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone T o change how the cursor works, select Option . If your cursor u ses the Click feature, the Drag & Drop feature will be available . If your cursor uses the Drag & Drop feature, the Click feature will be available . Press the left soft ...

  • Linksys WIP330 - page 65

    Wireless-G IP Phone 57 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Add . Select Add to create a new web site entry with the foll owing information: Name , URL (web addr ess), and Port Number . Scroll through these choices, and select Edit to configure a setting. Name . T o enter the Name, select Edit . Enter t ...

  • Linksys WIP330 - page 66

    Wireless-G IP Phone 58 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Web C a m Use the IP Phone to view video from any Linksys web camera. On the Web Ca m screen, a list of Linksys web cameras (if saved) wi ll be shown. Scroll through th ese choices and press the center selection key to view video. T o save the ...

  • Linksys WIP330 - page 67

    Wireless-G IP Phone 59 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Po r t N u m b e r . T o change the Port Number , select Edi t . Enter the new Port Number in the new window . Press the center selection key to save the new information, o r select Exit to return to the previous menu. (If you are not sure how ...

  • Linksys WIP330 - page 68

    Wireless-G IP Phone 60 Chapter 4: Configuring the Wireless-G IP Phone Settings of the Wireless-G IP Phone Informati on The status information of the IP Phone and its software is displayed on thi s read-only screen. Scroll through the settings to view them. Select Return to return to the previous menu. Phone Number . Displayed here is the Phone Numb ...

  • Linksys WIP330 - page 69

    Wireless-G IP Phone 61 Appendix A: Troubleshooting Common Problems and Solutions Appendix A: T roubleshooting This appendix provides solutions to problems that may occur during the installation and operation of the Wireless-G IP Phone . Read the description b elow to solve your problems. If you can't find an answer here , check the website of ...

  • Linksys WIP330 - page 70

    Wireless-G IP Phone 62 Appendix A: Troubleshooting Common Problems and Solutions If you have a Linksys router , th en follow these instructions: 1. On one of your networked computers, open your web browser . 2. Access the Router’s W eb-ba sed Utility by going to http://192.168.1.1 or the IP address of the Router . 3. A login screen will appear . ...

  • Linksys WIP330 - page 71

    Wireless-G IP Phone 63 Appendix A: Troubleshooting Common Problems and Solutions 2. When I’m on a telephone call, wor ds are dr opped intermittently . Go through this checklist until your problem is solved: • Are you using a wireless router and cordless phone? If so , the router and cordless phone may be using the same frequency and interfere w ...

  • Linksys WIP330 - page 72

    Wireless-G IP Phone 64 Appendix A: Troubleshooting Common Problems and Solutions 6. Wait 10 seconds. Po wer on the IP Phone by pr essing and holding down the Power button for two seconds. 7. Reboot one of your networked computers, and check for an ac tive Internet connectio n. • Set up port forwarding on your router . Y ou must sp ecify that four ...

  • Linksys WIP330 - page 73

    Wireless-G IP Phone 65 Appendix A: Troubleshooting Common Problems and Solutions 8. Repeat steps 5-7 until you have entered all four port ranges for the IP Phone . 9. Check the Enable option for the port services you want to use . 10. When you have completed th e configuration, click the Save Settings button. 4. The power LED does not light up. Go ...

  • Linksys WIP330 - page 74

    Wireless-G IP Phone 66 Appendix A: Troubleshooting Frequently Asked Questions Frequently Ask ed Questions Can I make calls if my Internet connection is down? No. Y our high-speed Internet conne ction must be active when you make Internet phone c alls. Can I use the IP Phone to make a call an d browse the Internet a t the same time? No. The IP Phone ...

  • Linksys WIP330 - page 75

    Wireless-G IP Phone 67 Appendix B: Glossary Appendix B: Glossar y This glossary contains some basic netw orking terms you may come ac ross when using this product. For more advanced terms, see the complete Linksys glossary at http://www .linksys.com/glossary . Access Po int - A device that allows wireless-equi pped computers and other devices to co ...

  • Linksys WIP330 - page 76

    Wireless-G IP Phone 68 Appendix B: Glossa ry DMZ ( D e m ilitarized Z one) - Removes the Router's firewall protection from one PC, allowing it to be “seen” from the Internet. DNS ( D omain N ame S erver) - The IP address of your ISP's server , which translates the name s of websites into IP addresses . Domain - A specific name for a n ...

  • Linksys WIP330 - page 77

    Wireless-G IP Phone 69 Appendix B: Glossary ISP ( I nternet S er vice P rovider) - A company that prov ides access to the Internet. LAN - The computers and networking produc ts that make up your local network. MAC ( M edia A ccess C ontrol) Address - The unique address that a manufacturer assigns to each networking device . Mbps ( M ega B its P er ...

  • Linksys WIP330 - page 78

    Wireless-G IP Phone 70 Appendix B: Glossa ry Switch - 1. A data switch that conn ects com puting devices to host computers, allowi ng a large number of devices to share a limited number of ports. 2. A device fo r making, br eaking, or cha nging the connections in an electrical cir cuit. TCP ( T ransmission C ontrol P rotocol) - A network protocol f ...

  • Linksys WIP330 - page 79

    Wireless-G IP Phone 71 Appendix C: Specifications Appendix C: Specifications Model WIP330 Standards 802.11b , 802.11g Channels 11 Channels (US , Canada), 13 Channels (Europe) T ransmit Power 12 dBm for 802.11b and 802.11g @ Normal T emp Range External Interface One Mini USB 1.1 Port, On e Stereo Ear Phon e Jack Display QVGA with 65k colors, 2.2 inc ...

  • Linksys WIP330 - page 80

    Wireless-G IP Phone 72 Appendix C: Specifications DTMF T ransmission In -band, Out-band (RFC2833) Voice Quality Acoustic Echo Cancellation Jitter Buffer Control Comfortable Noise Generation Packet Loss Concealment Dimensions 1.84" x 5.32" x 0.74" (W x H x D) (46.7 mm x 135.2 mm x 18.8 mm) Unit Weight 4.20 oz. (0.12 kg) Power 3.7V , 1 ...

  • Linksys WIP330 - page 81

    Wireless-G IP Phone 73 Appendix D: Warranty Information Appendix D: W arranty Information LIMITED WARRANTY Y our Inter net phone service provider warran ts to Y ou that, for a period of one year (the “Warranty Period”), y our Linksys Produ ct will be substantially free of defects in materials and workmans hip under normal use. Y our exclusive r ...

  • Linksys WIP330 - page 82

    Wireless-G IP Phone 74 Appendix D: Warranty Information ...

  • Linksys WIP330 - page 83

    Wireless-G IP Phone 75 Appendix E: Regulatory Information Appendix E: Regulator y Information FCC Statement This product has been tested a nd complies with the specificatio ns for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against har mful interference in a residential ...

  • Linksys WIP330 - page 84

    Wireless-G IP Phone 76 Appendix E: Regulatory Information Safety Notices Caution: T o reduce the risk of fire , use only No. 26 A WG or larger tele communication line cord. Do not use this product near water , for example , in a wet basement or near a swimming pool. Avoid using this product during an electrical storm. There may be a remote risk of ...

  • Linksys WIP330 - page 85

    Wireless-G IP Phone 77 Appendix E: Regulatory Information User Information for Consumer Products Covered by EU Dire ctive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains import ant infor mation for users with regards to th e proper disposal and rec ycling of Linksys products. Consumers are required to comply with ...

  • Linksys WIP330 - page 86

    Wireless-G IP Phone 78 Appendix E: Regulatory Information ...

  • Linksys WIP330 - page 87

    Wireless-G IP Phone 79 Appendix E: Regulatory Information ...

  • Linksys WIP330 - page 88

    Wireless-G IP Phone 80 Appendix E: Regulatory Information ...

  • Linksys WIP330 - page 89

    Wireless-G IP Phone 81 Appendix E: Regulatory Information ...

  • Linksys WIP330 - page 90

    Wireless-G IP Phone 82 Appendix E: Regulatory Information ...

  • Linksys WIP330 - page 91

    Wireless-G IP Phone 83 Appendix E: Regulatory Information ...

  • Linksys WIP330 - page 92

    Wireless-G IP Phone 84 Appendix E: Regulatory Information ...

  • Linksys WIP330 - page 93

    Wireless-G IP Phone 85 Appendix E: Regulatory Information ...

  • Linksys WIP330 - page 94

    Wireless-G IP Phone 86 Appendix E: Regulatory Information ...

  • Linksys WIP330 - page 95

    Wireless-G IP Phone 87 Appendix E: Regulatory Information ...

  • Linksys WIP330 - page 96

    Wireless-G IP Phone 88 Appendix E: Regulatory Information For more information, visit w ww .linksys.com. ...

  • Linksys WIP330 - page 97

    Wireless-G IP Phone 89 Appendix F: Contact Information Appendix F: Contact Information Need to contact Linksys? Visit us online for information on the latest prod ucts and updates to your existing products at: http://www .linksys.com or ftp.linksys.com Can't find information about a product you want to buy on the web? Do you want to know more ...

  • Linksys WIP330 - page 98

    Wireless-G IP Phone 90 Appendix F: Contact Information ...

  • Linksys WIP330 - page 99

    www .linksys.com ...

Manufacturer Linksys Category Cordless Telephone

Documents that we receive from a manufacturer of a Linksys WIP330 can be divided into several groups. They are, among others:
- Linksys technical drawings
- WIP330 manuals
- Linksys product data sheets
- information booklets
- or energy labels Linksys WIP330
All of them are important, but the most important information from the point of view of use of the device are in the user manual Linksys WIP330.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Linksys WIP330, service manual, brief instructions and user manuals Linksys WIP330. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Linksys WIP330.

Similar manuals

A complete manual for the device Linksys WIP330, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Linksys WIP330 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Linksys WIP330.

A complete Linksys manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Linksys WIP330 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Linksys WIP330, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Linksys WIP330, that we can find in the current document
3. Tips how to use the basic functions of the device Linksys WIP330 - which should help us in our first steps of using Linksys WIP330
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Linksys WIP330
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Linksys WIP330 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Linksys WIP330?

Use the form below

If you did not solve your problem by using a manual Linksys WIP330, ask a question using the form below. If a user had a similar problem with Linksys WIP330 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)