English dropdown-ico

Manual Nokia DNT2Mi-fp

60 pages 0.51 mb
Download

Go to site of 60

Summary
  • Nokia DNT2Mi-fp - page 1

    DN0445814 © Nokia Cor poration 1 (60) Issue 2-0 en Nokia Proprietary and Confidential DNT2Mi-fp Data Network Terminal User manual C33999.21 B0 ...

  • Nokia DNT2Mi-fp - page 2

    DNT2Mi-fp Data Network Terminal User manual 2 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en The information in this documentation is subject to change without notice and describes only the product defined in the introduction of this documentation. This documentation is intended for the use of Nokia's cust ...

  • Nokia DNT2Mi-fp - page 3

    DN0445814 © Nokia Cor poration 3 (60) Issue 2-0 en Nokia Proprietary and Confidential Contents Contents 3 Summary of changes 5 1 About this document 7 2 Introduction to DNT2Mi-fp 9 3 Front view 11 4 Rear panel 13 4.1 Line interface 14 4.2 Power supply 14 4.3 Terminal interface 21 5 Management 23 6 Commissioning 27 6.1 Management 28 6.2 Timing sour ...

  • Nokia DNT2Mi-fp - page 4

    DNT2Mi-fp Data Network Terminal User manual 4 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en ...

  • Nokia DNT2Mi-fp - page 5

    DN0445814 © Nokia Cor poration 5 (60) Issue 2-0 en Nokia Proprietary and Confidential Summary of changes Product collection and disposal within the European Union Guidelines for product collection and safe disposal of the equipment are indicated with a sticker placed on the equipment, shown in the figure below. Figure 1. Product collection and dis ...

  • Nokia DNT2Mi-fp - page 6

    DNT2Mi-fp Data Network Terminal User manual 6 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en ...

  • Nokia DNT2Mi-fp - page 7

    About this document DN0445814 © Nokia Cor poration 7 (60) Issue 2-0 en Nokia Proprietary and Confidential 1 About this document This manual introduces the DNT2Mi-fp network terminal and provides information needed for its installation and use. This manual is intended for those who use DNT2Mi-fp as a network terminal. If you use it in a ACL2i-DNT2M ...

  • Nokia DNT2Mi-fp - page 8

    DNT2Mi-fp Data Network Terminal User manual 8 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en ...

  • Nokia DNT2Mi-fp - page 9

    Introduction to DNT2Mi-fp DN0445814 © Nokia Cor poration 9 (60) Issue 2-0 en Nokia Proprietary and Confidential 2 Introduction to DNT2Mi-fp Nokia DNT2Mi-fp is a fixed port data access network terminal intended for customer premises. It provides a two-wire or four-wire SHDSL line interface (ITU-T G.991.2) and symmetrical 2M data interface (ITU-T G. ...

  • Nokia DNT2Mi-fp - page 10

    DNT2Mi-fp Data Network Terminal User manual 10 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en Figure 3. DNT2Mi-fp used in a point-to-point application DNT2Mi-fp can also be used in point-to-point connections with a DNT2Mi-fp terminal at both ends of the line (see Figure 3) DNT2Mi-fp DNT2Mi-fp BTS BTS SHDSL ...

  • Nokia DNT2Mi-fp - page 11

    Front view DN0445814 © Nokia Cor poration 11 (60) Issue 2-0 en Nokia Proprietary and Confidential 3 Front view Figure 4 presents DNT2Mi-fp front view with LED indicators. Figure 4. Front view of DNT2Mi-fp When power is switched on, the unit performs an automatic self test, which is used to check the most vital operational functions of the equipmen ...

  • Nokia DNT2Mi-fp - page 12

    DNT2Mi-fp Data Network Terminal User manual 12 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en • If there is no line signal, the DSL LED is off. • If line is handshaking, the DSL LED is blinking. • If the line is up and running, the DSL LED is lit. The yellow Alarm LED indicates alarm situation. • If the ...

  • Nokia DNT2Mi-fp - page 13

    Rear panel DN0445814 © Nokia Cor poration 13 (60) Issue 2-0 en Nokia Proprietary and Confidential 4 Rear panel Figure 5 shows connector locations on the rear panel of a DNT2Mi-fp. Figure 5. Rear panel connectors of the DNT2Mi-fp unit Earthing connector 48VDC LMI G.704/2M DIP Switch DSL Line Slots for wall mounting fastener Wall mounting fastener ...

  • Nokia DNT2Mi-fp - page 14

    DNT2Mi-fp Data Network Terminal User manual 14 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en 4.1 Line interface Figure 6. Line interfaces of DNT2Mi-fp 4.2 Power supply DNT2Mi-fp can be fed with either, 48VDC or remotely via ACL2i through the line. It is also possible to use a AC to DC converter (110/230VAC to ...

  • Nokia DNT2Mi-fp - page 15

    Rear panel DN0445814 © Nokia Cor poration 15 (60) Issue 2-0 en Nokia Proprietary and Confidential Selection of Power Supply option is done by strapping Figure 7. Strapping instruction for Power Supply NR4 NR3 NR2 C130 R248 C107 L20 IC26 NR1 R226 L12 J2 L6 C103 C2 C23 C188 C73 C116 R245 ST2 ST3 C181 T4 R210 VDR1 C58 T2 X1 R304 LD1 R216 C185 C102 C4 ...

  • Nokia DNT2Mi-fp - page 16

    DNT2Mi-fp Data Network Terminal User manual 16 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en Figure 8. Power supply options NR2 NR3 NR4 Remote Power Supply (default) NR2 NR3 NR4 48V DC Supply NR2 NR3 NR4 External AC/DC converter Supply ...

  • Nokia DNT2Mi-fp - page 17

    Rear panel DN0445814 © Nokia Cor poration 17 (60) Issue 2-0 en Nokia Proprietary and Confidential Figure 9. How to open the DNT2Mi-fp Assembled state 1 2 3 Groove that supports the back plate (see detail) Removal instruction: 1. Remove torx-screw with specified tool 2. Pull back plate along with motherboard using reasonable force out of the shell ...

  • Nokia DNT2Mi-fp - page 18

    DNT2Mi-fp Data Network Terminal User manual 18 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en Figure 10. Remote power feed through line Earthing bar 1.0 mm wire 2 DSL Line cable 1 - 6 6-pin modular jack, RJ-11 DSL Line 1. 2. 3. Not connected 4. Not connected 5. 6. Pin Line 1a Line interface Line 1b Line 2a (not ...

  • Nokia DNT2Mi-fp - page 19

    Rear panel DN0445814 © Nokia Cor poration 19 (60) Issue 2-0 en Nokia Proprietary and Confidential Figure 11. 48VDC supply connector 48VDC Earthing bar 1.0 mm wire 2 1 - 6 6-pin modular jack, RJ-11 48VDC 1. 2. 3. 4. 5. 6. Pin + 48VDC interface - N.C 48VDC ...

  • Nokia DNT2Mi-fp - page 20

    DNT2Mi-fp Data Network Terminal User manual 20 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en Figure 12. AC 110/230V supply through external AC/DC converter 48VDC Earthing bar 1.0 mm 2 AC/DC converter wire 110/230 V AC ...

  • Nokia DNT2Mi-fp - page 21

    Rear panel DN0445814 © Nokia Cor poration 21 (60) Issue 2-0 en Nokia Proprietary and Confidential 4.3 Terminal interface Figure 13. Symmetrical G.704/2M interface G.704/2M 18 G.704/2M 1. TX (OUT) 2. 3. SHIELD 4. RX (IN) 5. 6. SHIELD 7. 8. 8-pin modular jack, RJ-45 Not connected Not connected - Pin Data interface ...

  • Nokia DNT2Mi-fp - page 22

    DNT2Mi-fp Data Network Terminal User manual 22 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en ...

  • Nokia DNT2Mi-fp - page 23

    Management DN0445814 © Nokia Cor poration 23 (60) Issue 2-0 en Nokia Proprietary and Confidential 5 Management The Local Management Interface (LMI) is located at the rear panel (see Figure 12). The interface is used to manage DNT2Mi-fp with Service Terminal (V.11) and Macro Service Terminal Emulator (typically V.28) running on a PC or with other N ...

  • Nokia DNT2Mi-fp - page 24

    DNT2Mi-fp Data Network Terminal User manual 24 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en Figure 14. Local management connector 1 8 Local management connector (RJ-45) LMI DIP Switch - V.28 1 1. 107 (HiZ) Tx b (OUT) 2. 108 (IN) 3. 109 (HiZ) Tx a (OUT) 4. SG SG 5. 103 (IN) Rx b (IN) 6. 104 (OUT) 7. 105 V.28 V ...

  • Nokia DNT2Mi-fp - page 25

    Management DN0445814 © Nokia Cor poration 25 (60) Issue 2-0 en Nokia Proprietary and Confidential Figure 15. Q1 management bus Up to 32 DNT2Mi-fp units can be connected to the same Q1 bus of V.11-type via a local management interface. DNT2Mi-fp - - - Tx Rx Tx Rx Tx Rx Tx Rx DNT2Mi-fp DIP -sw i tc h DSL Line Q1 management bus Q1 management through ...

  • Nokia DNT2Mi-fp - page 26

    DNT2Mi-fp Data Network Terminal User manual 26 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en ...

  • Nokia DNT2Mi-fp - page 27

    Commissioning DN0445814 © Nokia Cor poration 27 (60) Issue 2-0 en Nokia Proprietary and Confidential Note 6 Commissioning This chapter describes the most common items that need to be checked before DNT2Mi-fp is taken into use. DNT2Mi-fp is ready to operate after the power supply (AC/DC converter, DC or remote power) and port and line cables are co ...

  • Nokia DNT2Mi-fp - page 28

    DNT2Mi-fp Data Network Terminal User manual 28 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en Note If errors were found during the power-up test, more information on this can be found in the Self test menu (Q1: 5,4,0). 6.1 Management DNT2Mi-fp can be managed through the line connection or local management port ...

  • Nokia DNT2Mi-fp - page 29

    Commissioning DN0445814 © Nokia Cor poration 29 (60) Issue 2-0 en Nokia Proprietary and Confidential DNT2Mi-fp can also be used as a network timing source using the unit's Internal timing circuits. DNT2Mi-fp can also be used as Transparent timing . This means that both E1 transmission directions are independent. 6.3 Line settings You have to ...

  • Nokia DNT2Mi-fp - page 30

    DNT2Mi-fp Data Network Terminal User manual 30 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en Line alarms (Q1: 6,3,8 and 6,3,9) The BER alarm limit and alarm severity have to be checked. 6.4 Port settings You have to check the following items: Port framing (Q1: 6,4,1) Check that the 2M data interface settings a ...

  • Nokia DNT2Mi-fp - page 31

    Commissioning DN0445814 © Nokia Cor poration 31 (60) Issue 2-0 en Nokia Proprietary and Confidential Note Default password for DNT2Mi-fp protection is DNT2Mi, and it can change by menu option (Q1: 10,4,3). 6.6 Measurements After all the settings have been checked, it is recommended that you carry out a line quality and BER test. Before starting th ...

  • Nokia DNT2Mi-fp - page 32

    DNT2Mi-fp Data Network Terminal User manual 32 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en ...

  • Nokia DNT2Mi-fp - page 33

    Maintenance DN0445814 © Nokia Cor poration 33 (60) Issue 2-0 en Nokia Proprietary and Confidential 7 Maintenance This chapter describes what general information and statistics you can get on the equipment to be monitored. It also deals with possible alarms and faults. You can access all this information using Q1 menus. The menus are described in f ...

  • Nokia DNT2Mi-fp - page 34

    DNT2Mi-fp Data Network Terminal User manual 34 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en In this menu the name of the supervised unit, installation date and installer are changeable. To change these parameters select Modify: Q1 menu option 4,7,2,1 for name, 4,7,4,1,1 for date and 4,7,4,1,2 for installer. N ...

  • Nokia DNT2Mi-fp - page 35

    Maintenance DN0445814 © Nokia Cor poration 35 (60) Issue 2-0 en Nokia Proprietary and Confidential 7.3 Testing DNT2Mi-fp tests can be controlled using Q1 menus. The following tests are available for testing a DNT2Mi terminal: SB 1, P ort Code Se verity Q1 message 0x15 B Loop to interf ace 0x32 AS Loss of incoming 2 M signal 0x42 B Ais 2 M 0x51 AS ...

  • Nokia DNT2Mi-fp - page 36

    DNT2Mi-fp Data Network Terminal User manual 36 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en Figure 19. Local test loop Figure 20. Network test loop Q1 management A utomatic controll Note Equipment tests P ower up test After power is s witched on Self test Self test (5.4) During self test management and line c ...

  • Nokia DNT2Mi-fp - page 37

    Maintenance DN0445814 © Nokia Cor poration 37 (60) Issue 2-0 en Nokia Proprietary and Confidential 7.4 Checking measurements and statistics The parameters that can be viewed through the Q1 menus Measurement (main menu branch 7 and Statistics (main menu branch 8) are listed below. Measurements via Q1 • Noise margin • Rx level • Tx level • L ...

  • Nokia DNT2Mi-fp - page 38

    DNT2Mi-fp Data Network Terminal User manual 38 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en System counters (Q1: 8,3) Number of CPU resets and the time passed since the last reset. T able 2. Statistics values via Q1 Information Abbre viation and/or ratio Description T otal time TT Time passed since the last r ...

  • Nokia DNT2Mi-fp - page 39

    Technical specifications DN0445814 © Nokia Cor poration 39 (60) Issue 2-0 en Nokia Proprietary and Confidential 8 Technical specifications T able 3. DNT2Mi-fp dimensions Width 56 mm Height 173 mm Depth 138 mm W eight 510g T able 4. Environmental and mechanical Storage ETSI ETS 300 019-2-1 class 1.2 Operation ETSI ETS 300 019-2-3 class 3.2 T ranspo ...

  • Nokia DNT2Mi-fp - page 40

    DNT2Mi-fp Data Network Terminal User manual 40 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en Data lead time Data lead-time means the time which is needed to transfer the data from the incoming 2M data interface of ACL2i to the outgoing 2M data interface of DNT2Mi-fp at the other end of the line. The lead-time ...

  • Nokia DNT2Mi-fp - page 41

    Technical specifications DN0445814 © Nokia Cor poration 41 (60) Issue 2-0 en Nokia Proprietary and Confidential 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 4 81 2 1 6 20 24 28 32 Data lead-time ( A C L2i to DNT2Mi- f p ) n = 3 to 32 ( 192 kbit/ to 2048 kbit/s ) ms ...

  • Nokia DNT2Mi-fp - page 42

    DNT2Mi-fp Data Network Terminal User manual 42 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en Figure 21. Max SHDSL reach with Remote Powering The values marked in bold means that remote powering is limiting maximum length. T able 7. DNT2Mi-fp power supply P ower consumption DNT2Mi-fp 5,5 W 4 - wire mode 4,5 W 2 ...

  • Nokia DNT2Mi-fp - page 43

    Technical specifications DN0445814 © Nokia Cor poration 43 (60) Issue 2-0 en Nokia Proprietary and Confidential Electromagnetic compatibility (EMC) of DNT2Mi-fp complies with the following specifications: V oltage 90 to 264 V AC F requency 47 to 65 Hz DC power suppl y V oltage 48V (40V to 70V) Remote power suppl y V oltage 50 to 150 V on both pair ...

  • Nokia DNT2Mi-fp - page 44

    DNT2Mi-fp Data Network Terminal User manual 44 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en ...

  • Nokia DNT2Mi-fp - page 45

    Factory settings DN0445814 © Nokia Cor poration 45 (60) Issue 2-0 en Nokia Proprietary and Confidential Note 9 Factory settings The factory default values can be recalled from the Q1 menu path 6,7. The default values are marked bold in Q1 menu chart. Recalling of factory settings can take up to 60 seconds. T able 11. Ser vice settings Q1 speed: 48 ...

  • Nokia DNT2Mi-fp - page 46

    DNT2Mi-fp Data Network Terminal User manual 46 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en T able 14. Alar m limits T emperature alar m: Limit: 75 o C Se verity: No alarm P or t BER alarm: Limit: E-3 Se verity: B-le vel Line BER alarm: Limit: E-3 Se verity: B-le vel ...

  • Nokia DNT2Mi-fp - page 47

    Q1 menu diagrams DN0445814 © Nokia Cor poration 47 (60) Issue 2-0 en Nokia Proprietary and Confidential Appendix A. Q1 menu diagrams General The Q1 Main menu level contains the following 11 menus, of which those available in DNT2Mi-fp are typed in boldface in the list below: 1. Fault display 2. Local alarm cancel 3. Reset local cancel 4. Identific ...

  • Nokia DNT2Mi-fp - page 48

    DNT2Mi-fp Data Network Terminal User manual 48 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en Figure 22. Main Q1 menu structure 1 Fault display 3 Reset local cancel *) 4 Identifications 5 Controls 6 Settings 7 Measurements 8 Statistics 9 Testing *) 10 User privileges 11 Miscellaneous *) 4 DNT-fp Identifications ...

  • Nokia DNT2Mi-fp - page 49

    Q1 menu diagrams DN0445814 © Nokia Cor poration 49 (60) Issue 2-0 en Nokia Proprietary and Confidential Figure 23. Identifications menu DNT-fp Identifications: 0 Display 1 Eq type 2 Eq name 4 Installation info 5 HW version 6 SW version 7 Modify 8 Serial number 4 4,0 Identifications Equipment type: DNT2Mi-fp G.704 4w (T65690) Equipment name: DNT2Mi ...

  • Nokia DNT2Mi-fp - page 50

    DNT2Mi-fp Data Network Terminal User manual 50 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en Figure 24. Identifications menu (continued) 4,7,4 Installation info: 0 Display 1 Modify 4,7,4,1,1 Give new Installation date: yyyy-mm-dd 4,7,4,1,2 Give new Installer: Max 20 characters 4,7,4,1 Modify: 1 Date 2 Installe ...

  • Nokia DNT2Mi-fp - page 51

    Q1 menu diagrams DN0445814 © Nokia Cor poration 51 (60) Issue 2-0 en Nokia Proprietary and Confidential Figure 25. Controls menu Port test loop: 0 Display 1 Port test loop off 2 Loop to Port 5 5,2 5,4 DNT-fp controls: 0 Display 1 All test loops off 2 Port test loop 3 Line test loop 4 Self test 5,3 Self test: 0 Result of last ST 1 Start Self Test L ...

  • Nokia DNT2Mi-fp - page 52

    DNT2Mi-fp Data Network Terminal User manual 52 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en Figure 26. Settings menu structure 6,1,3 6,1,7 6,1,12 6,1,13 6,2 6,3 6,4 6,7 DNT-fp settings: 0 Display 1 Service options 2 Timing source 3 Line settings 4 Port settings 7 Load factory settings Service options: 0 Displ ...

  • Nokia DNT2Mi-fp - page 53

    Q1 menu diagrams DN0445814 © Nokia Cor poration 53 (60) Issue 2-0 en Nokia Proprietary and Confidential Figure 27. Settings menu structure (continued) Test time out limit: 0 Display 1 to 64999 min 65000 no limit 6,1,7 Q1 via line: 0 Display 1 On 2 Off 6,1,3 Timing source: 0 Display 1 Internal 2 Line 3 Port 4 Transparent 6,2 Temperarure alarm limit ...

  • Nokia DNT2Mi-fp - page 54

    DNT2Mi-fp Data Network Terminal User manual 54 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en Figure 28. Settings menu structure (continued) 6,3,9 Line settings: 0 Display 3 Line interface 6 Power backoff 8 BER alarm limit 9 BER alarm severity 6,3 Line interface SHDSL mode: 1 STU-C (fixed) 2 STU-R (rate adaptiv ...

  • Nokia DNT2Mi-fp - page 55

    Q1 menu diagrams DN0445814 © Nokia Cor poration 55 (60) Issue 2-0 en Nokia Proprietary and Confidential Figure 29. Settings menu structure (continued) 6,4,1 Framing format: 0 Display 1 No frame 2 Basic frame 3 CRC multiframe 4 BF monitoring 5 CRC monitoring 6,4 6,7 Load factory settings: Are you sure? 1 Cancel 99 Yes Port settings: 0 Display 1 Fra ...

  • Nokia DNT2Mi-fp - page 56

    DNT2Mi-fp Data Network Terminal User manual 56 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en Figure 30. Measurements menu structure DNT-fp measurements: 0 Display all 1 Noise margins 2 Rx levels 3 Tx levels 4 Attenuations 5 Supply voltage 6 Temperature P # 1: 2: xx xx xx xx *) Line voltage xxV Temperature xxC ...

  • Nokia DNT2Mi-fp - page 57

    Q1 menu diagrams DN0445814 © Nokia Cor poration 57 (60) Issue 2-0 en Nokia Proprietary and Confidential Figure 31. Statistics menu structure 8,2 8,3 Give period 0 to 100: (0=curr., 1=last, 2=prev., etc.) xx xx xx xx xx xx xx Port stat absolute: 1 15 min periods 2 24h periods 3 Since last reset 8 DNT-fp statistics: 1 Port statistics 2 Line statisti ...

  • Nokia DNT2Mi-fp - page 58

    DNT2Mi-fp Data Network Terminal User manual 58 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en Figure 32. Statistics menu structure (continued) 1) You can choose up to 100 15 min periods or up to 30 24h periods *) Not in T65690.01 15 min absolute RX statistics: P0 xxd xxh xxmin xxs UAT ES SES BBE Line statistics ...

  • Nokia DNT2Mi-fp - page 59

    Q1 menu diagrams DN0445814 © Nokia Cor poration 59 (60) Issue 2-0 en Nokia Proprietary and Confidential Figure 33. Privileges menu structure The factory settings are marked within brackets. (10) (No protection) DNT-fp privileges: 1 Password for privileges 3 Cancel privileges 4 Setting parameters Password for privileges: Give password 10 10,1 Privi ...

  • Nokia DNT2Mi-fp - page 60

    DNT2Mi-fp Data Network Terminal User manual 60 (60) © Nokia Cor poration DN0445814 Nokia Proprietary and Confidential Issue 2-0 en ...

Manufacturer Nokia Category Network Card

Documents that we receive from a manufacturer of a Nokia DNT2Mi-fp can be divided into several groups. They are, among others:
- Nokia technical drawings
- DNT2Mi-fp manuals
- Nokia product data sheets
- information booklets
- or energy labels Nokia DNT2Mi-fp
All of them are important, but the most important information from the point of view of use of the device are in the user manual Nokia DNT2Mi-fp.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Nokia DNT2Mi-fp, service manual, brief instructions and user manuals Nokia DNT2Mi-fp. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Nokia DNT2Mi-fp.

Similar manuals

A complete manual for the device Nokia DNT2Mi-fp, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Nokia DNT2Mi-fp by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Nokia DNT2Mi-fp.

A complete Nokia manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Nokia DNT2Mi-fp - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Nokia DNT2Mi-fp, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Nokia DNT2Mi-fp, that we can find in the current document
3. Tips how to use the basic functions of the device Nokia DNT2Mi-fp - which should help us in our first steps of using Nokia DNT2Mi-fp
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Nokia DNT2Mi-fp
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Nokia DNT2Mi-fp in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Nokia DNT2Mi-fp?

Use the form below

If you did not solve your problem by using a manual Nokia DNT2Mi-fp, ask a question using the form below. If a user had a similar problem with Nokia DNT2Mi-fp it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)