English dropdown-ico

Manual Cateye EC-3600

71 pages 6.54 mb
Download

Go to site of 71

Summary
  • Cateye EC-3600 - page 1

    CATEYE ERGOCISER AUTOMATIC TYPE Applicable Models: EC-1200/EC-1600/EC-3600/EC-3700 SERVICE MANUAL ...

  • Cateye EC-3600 - page 2

    Cateye Ergociser Series 1000 Service Manual 2 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: INDEX  Repair & Adjustment Methods EC-1200 EC-1600 EC-3600 EC-3700  ES-1: Replacing the Wiring within the Frame ----------------------- 24  ES-2: Replacing the 5P Cable --------------------------------------- 25~26 ? ...

  • Cateye EC-3600 - page 3

    EC-1200 EC-1600 EC-3600 EC-3700 Cateye Ergociser Series 1000 Service Manual 3 Applicable Models: R EC-3 7 00 O N O F F EC-1600 R E S E T M O D E A D V How to Use This Service Manual The manual consists of Part A, Part B and Part C. Part A refers to trouble-shooting which allows you to identify the cause and areas to be fixed depending on typical sy ...

  • Cateye EC-3600 - page 4

    Cateye Ergociser Series 1000 Service Manual 4 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Name of Parts for Upright Type (w/o Flywheel) Post Spacer Lock Nut Frame Cable Holder Large Gear CDC Magnet Connector Cover 5P Cable Connector 5P Cable CDC Sensor Frame Leg Cover Leg Pipe Leg Pipe Fixing Screw Caster Levelling Knob Adjust Screw Spacer S ...

  • Cateye EC-3600 - page 5

    EC-1200 EC-1600 EC-3600 EC-3700 Cateye Ergociser Series 1000 Service Manual 5 Applicable Models: EC-1200 Inlet Metal Base AC Adapter Inlet Chain Workload Unit Reinforcing Metal Base Nut Workload Unit Reinforcing Metal Base Leg Pipe Fixing Screw Leg Pipe Lever Cover Cable Holder Handlebar Post Seat Post Center Cover Frame Cover Crank Cover Workload ...

  • Cateye EC-3600 - page 6

    Cateye Ergociser Series 1000 Service Manual 6 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Name of Parts for Upright Type (w/ Flywheel) 5P Cable Post Spacer Adjust Screw Cable Holder Large Gear CDC Magnet CDC Sensor Frame Caster Leg Pipe Fixing Screw Leg Pipe 5P Cable Connector Lock Nut Flywheel Mounting Metal Base BB Set Crank Cap Crank Powe ...

  • Cateye EC-3600 - page 7

    EC-1200 EC-1600 EC-3600 EC-3700 Cateye Ergociser Series 1000 Service Manual 7 Applicable Models: CDC Magnet Flywheel Flywheel Fixing Screw Flywheel Metal Base Fixing Screw Flywheel Metal Base AC Adapter Inlet Inlet Metal Base Plain Belt Chain Workload Unit Reinforcing Nut [Hexagon Nut (M6-3)] Workload Unit Reinforcing Metal Base Flywheel Mounting M ...

  • Cateye EC-3600 - page 8

    Cateye Ergociser Series 1000 Service Manual 8 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: R Name of Parts for Recumbent Type (EC-3600 & EC3700) Wiring within Frame Flywheel Metal Base Fixing Screw Flywheel Flywheel Fixing Screw Flywheel Metal Base Plain Belt Power Supply Board Fixing Bolt Power Supply Board Crank Crank Nut 5P Cable Conne ...

  • Cateye EC-3600 - page 9

    EC-1200 EC-1600 EC-3600 EC-3700 Cateye Ergociser Series 1000 Service Manual 9 Applicable Models: O N O F F Cable Holder Chain CDC Sensor Workload Unit Reinforcing Nut Workload Unit Reinforcing Metal Base Workload Unit Hexagon Head U Nut Free Wheel Set Derailleur Solenoid Coil Derailleur Mounting Bolt Power Supply Board Cable Holder Flywheel Plain B ...

  • Cateye EC-3600 - page 10

    EC-1200B EC-1600B Applicable Models: Belt Drive Name of Parts for Belt Drive Type Teethed Timing Belt (P8M15-1192) Pulley 2-A Set Idler A Set Idler Spring A Pulley 1-A Set Pulley Flange Pulley 1-B Workload Unit Teethed Timing Belt (P8M15-1192) Pulley 2-A Set Pulley 1-B Idler A Set Workload Unit Idler Spring A Pulley 1-A Set Pulley Flange EC-1600B E ...

  • Cateye EC-3600 - page 11

    EC-3600B/EC-3700B Applicable Models: Name of Parts for Belt Drive Type Teethed Timing Belt (P8M15-1080) Pulley 2-A Set Pulley 1-B Workload Unit Idler A Set Idler Spring A Pulley 1-A Set Pulley Flange Belt Drive EC-3600B/EC-3700B Cateye Ergociser Series 1000 Service Manual ADD. 2 ...

  • Cateye EC-3600 - page 12

    EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: CN4 + – C1 – + C2 R8 REG R1 TR1 R2 TR2 R3 IC1 R7 VR1 D1 CN3 CN2 CN1 – + – – – + Circuit Diagram for Automatic Type Cateye Ergociser AC Plug 100V AC AC Adapter 12V DC* DC Connector *Fluctuate depending on the electric load About 16V when the load is zero. AC Adapter Inlet Black Cable (-) ...

  • Cateye EC-3600 - page 13

    Check Method of Causes Repair Method Explanation Figures EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Cateye Ergociser Series 1000 Service Manual 11 T-1 T-1 Black Cable No Display on Control Unit after Power ON. (1) Check the power is available at the wall socket before proceeding to checking of causes. [1] Checking the AC Adapter 1. Detach t ...

  • Cateye EC-3600 - page 14

    Check Method of Causes Repair Method Explanation Figures EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Cateye Ergociser Series 1000 Service Manual 12 T-1 T-1 No Display on Control Unit after Power ON. (2) [3] When the meter reading at step 2. is 0V or less than 14V, check the main unit in accordance with the following procedures: 1 . Remove th ...

  • Cateye EC-3600 - page 15

    Check Method of Causes Repair Method Explanation Figures EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Cateye Ergociser Series 1000 Service Manual 13 T-2 T-2 Line on CDC Sensor Power Supply Board No Display of Cadence (The cadence remains at zero (0) and does not count when the pedal is rotated.) [1] Checking the Control Unit 1. Turn off the p ...

  • Cateye EC-3600 - page 16

    Check Method of Causes Repair Method Explanation Figures EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Cateye Ergociser Series 1000 Service Manual 14 T-3 T-3 Replace the pulse sensor with a brand new one. Replace the control unit with a brand new one. No Display of Pulse Rate 1 . Turn on the power to display the in-training screen (any exercis ...

  • Cateye EC-3600 - page 17

    Check Method of Causes Repair Method Explanation Figures EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Cateye Ergociser Series 1000 Service Manual 15 MODE ADV RESET 10 1 10 1 TIME T-4 T-4 123 ON OFF 4 Printer Symbol Back of Control Unit Paper Cutter Fig. 1 Control Unit Fig. 2 Select Switch Fig. 3 Tweezer Printer Cover Fig. 4 Cable Connector Fi ...

  • Cateye EC-3600 - page 18

    Check Method of Causes Repair Method Explanation Figures EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Cateye Ergociser Series 1000 Service Manual 16 T-5 No Loading (Check of mechanical systems) [1] Checking the Mechanical Systems See the Section D1 & D2 "Removing the Frame Covers" to remove the frame cover, and check the inside ...

  • Cateye EC-3600 - page 19

    Check Method of Causes Repair Method Explanation Figures EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Cateye Ergociser Series 1000 Service Manual 17 Connector Terminal 3 T-5 T-5 [2]Checking the Electrical Systems 1. Connect the AC adapter, and turn on the power of the main unit. 2 . Obtain the manual training program, set the pedal torque set ...

  • Cateye EC-3600 - page 20

    Check Method of Causes Repair Method Explanation Figures EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Cateye Ergociser Series 1000 Service Manual 18 T-6 T-6 No Pedal Rotation (Locked) 1. Remove the frame cover, and check the inside of frame. (See the Sections D1 & D2 "Removing the Frame Covers.") 2. Check if the plain belt of th ...

  • Cateye EC-3600 - page 21

    Check Method of Causes Repair Method Explanation Figures EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Cateye Ergociser Series 1000 Service Manual 19 T-7-1 Unusual Noise (Continuous and Increasing) The noise generating source will be different depending on the cases whether it is of continuous noise or periodical noise (several times per rotat ...

  • Cateye EC-3600 - page 22

    Check Method of Causes Repair Method Explanation Figures EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Cateye Ergociser Series 1000 Service Manual 20 T-7-2 T-7-2 Unusual Noise (Periodical) [2] Noise is Periodical. 1. Noise occurs around once per rotation of the pedal. t The pedal installation may not be perfect. (Fig. 1) 2. Sliding noise occur ...

  • Cateye EC-3600 - page 23

    Check Method of Causes Repair Method Explanation Figures EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Cateye Ergociser Series 1000 Service Manual 21 T-7-3 T-7-3 Unusual Noise (Noise occurs when the pedal is rotated with a large torque.) [3] Noise occurs when the pedal is rotated with a large torque. A large sound "bang" occurs when ...

  • Cateye EC-3600 - page 24

    Cateye Ergociser Series 1000 Service Manual 22 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: D-1 D-1 ON OFF ON OFF Fig. 1 Leg Pipe Fixing Screw No. 15 Wrench ON OFF Frame Cover Removing the Frame Covers Upright Type (EC-1200 & EC-1600) When any repair or adjustment of parts within the frame is required, remove the frame covers in the follo ...

  • Cateye EC-3600 - page 25

    Cateye Ergociser Series 1000 Service Manual 23 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: D-2 D-2 Fig. 1 Fig. 2 Fig. 3 Fig. 4 Removing the Frame Covers Recumbent Type (EC-3600 & EC-3700) When any repair or adjustment of parts within the frame is required, remove the frame covers in the following procedures. à REMOVAL 1. Remove the peda ...

  • Cateye EC-3600 - page 26

    Cateye Ergociser Series 1000 Service Manual 24 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Cable Holders ON OFF ON OFF ES-1 ES-1 Inlet Metal Base Fig. 1 [A] Removing the Wiring Parts 1 . Remove the frame cover. (See the Sections D-1 & D-2 "Removing the Frame Covers.") 2. Loosen the two screws on the inlet metal base to remove t ...

  • Cateye EC-3600 - page 27

    Cateye Ergociser Series 1000 Service Manual 25 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: ES-2 ES-2 Fig. 1 EC-1200 Fig. 2 Fig. 3 EC-1200 Fig. 4 EC-1600 Fig. 5 Fig. 6 Fig. 7 Screws Replacing the 5P Cable (1) Procedures are different depending on the type of model as shown below: à Upright Type (EC-1200) T Removing the Existing Cable 1. Loos ...

  • Cateye EC-3600 - page 28

    Cateye Ergociser Series 1000 Service Manual 26 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: ES-2 ES-2 EC-1600 30cm Replacing the 5P Cable (2) T Mounting the Brand New Cable 5P Cable within the Handlebar Post 1. Using cable holders, bind the 5P cable, leaving approx. 5cm portion from the control unit side cable connector, to the handlebar post ...

  • Cateye EC-3600 - page 29

    Cateye Ergociser Series 1000 Service Manual 27 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Power Supply Board [1] Replacing the Power Supply Board 1 . Remove the frame cover. (See the Sections D-1 & D-2 "Removing the Frame Covers.") 2. Remove all connectors CN-1, CN-2, CN-3 and CN-4 which are connected to the power supply board ...

  • Cateye EC-3600 - page 30

    Cateye Ergociser Series 1000 Service Manual 28 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: I mA I mA ON OFF ES-4 Perform the positional correction of the core slit section after detaching the frame cover and turning off the power. (See the Sections D-1 & D-2 "Removing the Frame Covers.") [1] Correction with Nuts of Workload Uni ...

  • Cateye EC-3600 - page 31

    Cateye Ergociser Series 1000 Service Manual 29 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: ON OFF ES-5 ES-5 CDC Sensor CDC Sensor Power Supply Board EC-1200 & EC-1600 Power Supply Board EC-3600 & EC-3700 Fig. 1 Power Supply Board CN-3 Connector Fig. 2 CDC Sensor Line on CDC Sensor Center of CDC Magnet Fig. 3 Approx. 2mm gap between C ...

  • Cateye EC-3600 - page 32

    Cateye Ergociser Series 1000 Service Manual 30 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: ES-6 ES-6 Fig. 1 Control Unit Cable Connector Fig. 2 Screw Control Unit Fig. 3 Substrate Substrate Fixing Screw Connector Fig. 4 Silicon Fig. 5 Control Unit Upper Body Panel Keyboard Fig. 6 Silicon Replacing the Panel Keyboard 1 . Remove the control un ...

  • Cateye EC-3600 - page 33

    Cateye Ergociser Series 1000 Service Manual 31 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: ES-7 ES-7 Replacing the Button Panel 1. Insert a thin cutting knife, while paying cautions not to damage the control unit, in between the button panel and the body, and carefully peel off the button panel. (Fig. 1) 2. Clean the adhesive agent, if any, ...

  • Cateye EC-3600 - page 34

    Cateye Ergociser Series 1000 Service Manual 32 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: ES-8 ES-8 Printer Fixing Screws Fig. 1 Printer Unit Fig. 2 CN-2 Connector CN-3 Connector Replacing the Printer 1. Open the control unit into upper and lower bodies by referring to the Section ES-6 "Replacing the Panel Keyboard (1) & (2)." ...

  • Cateye EC-3600 - page 35

    Cateye Ergociser Series 1000 Service Manual 33 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: DCV PR ES-9 ES-9 Upright Type Control Unit Cable Connector Adjusting the Printing Darkness 1. Remove the control unit from the main unit. (Fig. 1) 2. Loosen four screws on the bottom of the control unit, and remove the cable connector from the unit. (F ...

  • Cateye EC-3600 - page 36

    Cateye Ergociser Series 1000 Service Manual 34 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: ES-10 ES-10 Printer Unit Fig. 1 Pincette Paper Jamming in Printer 1. Open the control unit into upper and lower bodies by referring to the Section ES-6 "Replacing the Panel Keyboard (1) & (2)." 2. Remove the jammed paper with a tweezer or ...

  • Cateye EC-3600 - page 37

    Cateye Ergociser Series 1000 Service Manual 35 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Workload Unit Reinforcing Metal Base MS-1 MS-1 EC-1200 Fig. 1 Power Supply Board CN-1 Connector Fig. 2 Cable Holder Fig. 3 Wrench Fig. 4 Workload Unit Fixing Hexagon Head Bolt Replacing the Workload Unit (w/o Flywheel) (1) à Removing the Workload Unit ...

  • Cateye EC-3600 - page 38

    Cateye Ergociser Series 1000 Service Manual 36 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: MS-1 MS-1 Derailleur Spring Replacing the Workload Unit (w/o Flywheel) (2) à Mounting the Brandnew Workload Unit 1. Assemble the brandnew workload unit so that it will engage with the workload unit mounting metal base of the frame (Fig. 1). Be careful ...

  • Cateye EC-3600 - page 39

    Cateye Ergociser Series 1000 Service Manual 37 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: MS-1 MS-1 Fig. 1 K 6020 I mA COIL LOT No. Replacing the Workload Unit (w/o Flywheel) (3) à Checking the Positions of Copper Disk Plate and Solenoid Coil Core Slit T Regarding the workload unit, positions of copper disk plate and solenoid coil core sli ...

  • Cateye EC-3600 - page 40

    Cateye Ergociser Series 1000 Service Manual 38 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: ON MS-2 MS-2 Replacing the Workload Unit (w/ Flywheel) à Removing the Workload Unit 1. Remove the gear crank and the chain by referring to Items 1 through 4 of the Section MS-1 "Replacing the Workload Unit (w/o Flywheel) (1)." 2. Loosen the ...

  • Cateye EC-3600 - page 41

    Cateye Ergociser Series 1000 Service Manual 39 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: MS-3 MS-3 Adjusting the Flywheel à Adjustment Method of Flywheel Since the plain belt which delivers the rotation of both the workload unit and flywheel requires an adequate tension, a specified tension should be given to the plain belt in the followi ...

  • Cateye EC-3600 - page 42

    Cateye Ergociser Series 1000 Service Manual 40 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: ON OFF MS-4 MS-4 Crank Replacing the Chain 1. Remove the frame cover by referring to the Sections D-1 & D- 2 "Removing the Frame Covers." 2. Use a screwdriver or the like to remove the derailleur spring which is hung on the derailleur met ...

  • Cateye EC-3600 - page 43

    Cateye Ergociser Series 1000 Service Manual 41 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: ON OFF MS-5 MS-5 Replacing the Free Wheel Set 1 . Detach the chain. (See the Section MS-4 "Replacing the Chain.") 2. Hold the D-cut section on the free wheel shaft with a No.13 wrench, and remove the hexagon U-nut. Then, pull off the free whe ...

  • Cateye EC-3600 - page 44

    Cateye Ergociser Series 1000 Service Manual 42 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: ON MS-6 MS-6 Derailleur Set EC-1200 & EC-1600 Derailleur Set EC-3600 & EC-3700 Fig. 1 Derailleur Spring Derailleur Fig. 2 Derailleur Fixing Bolt Derailleur Replacing the Derailleur Set 1. Detach the derailleur spring from the pawl of the derail ...

  • Cateye EC-3600 - page 45

    Cateye Ergociser Series 1000 Service Manual 43 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: MS-7 MS-7 Replacing the Idler Set 1. Remove the frame cover by referring to the Sections D-1 & D- 2 "Removing the Frame Covers." 2. Remove the idler spring from the pawl of the idler metal base. (Fig. 1) 3. Loosen the idler mounting bolts ...

  • Cateye EC-3600 - page 46

    Cateye Ergociser Series 1000 Service Manual 44 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Cotterless Gear Crank Removing/Fastening Tool Cotterless Gear Crank Removing/Fastening Tool Upper Part of Large Gear ON OFF MS-8 MS-8 Replacing the Crank Set (1) à Removing the Gear Crank (Crank) 1. Remove the frame cover by referring to the Sections ...

  • Cateye EC-3600 - page 47

    Cateye Ergociser Series 1000 Service Manual 45 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: MS-8 MS-8 Replacing the Crank Set (2) Replacing the Crank Set (2) Fig. 1 Wrench Cotterless Gear Crank Removing/Fastening Tool Fig. 2 Cotterless Gear Crank Removing/Fastening Tool Wrench Fig. 3 Right-Side Crank Left-Side Crank Fig. 4 Coin Crank Cap Fig. ...

  • Cateye EC-3600 - page 48

    Cateye Ergociser Series 1000 Service Manual 46 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: MS-9 MS-9 Replacing the BB Set à REMOVAL 1. Remove the frame cover, by referring to the Sections D-1 & D- 2 "Removing the Frame Covers." 2. Remove the gear crank/crank from the crank shaft(BB axle), by referring to the Section MS-8 " ...

  • Cateye EC-3600 - page 49

    Cateye Ergociser Series 1000 Service Manual 47 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: MS-10 MS-10 Fig. 1 Replacing the Post Spacer à REMOVAL 1. Remove the center cover, by referring to the Section MS-19 "Replacing the Center Cover of Upright Type." 2. Remove the lock nut located at the side of the frame, and then remove the a ...

  • Cateye EC-3600 - page 50

    Cateye Ergociser Series 1000 Service Manual 48 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: MS-11 MS-11 Fig. 1 Adjusting the Spacer Spring 1. Remove the center cover, by referring to the Section MS-19 "Replacing the Center Cover of Upright Type." 2. Slightly loosen the lock nut at the side of the frame. (Fig. 1) 3. Fasten the adjust ...

  • Cateye EC-3600 - page 51

    EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Cateye Ergociser Series 1000 Service Manual 49 MS-12 MS-12 Replacing the Inner Pipe Spacer à REMOVAL 1. Slide the seat pipe to the utmost back end, and set it at a posi- tion where the screw head can bee seen through the hole on the top surface of the seat pipe. 2. Remove the stopper screw. (Fig. ...

  • Cateye EC-3600 - page 52

    Cateye Ergociser Series 1000 Service Manual 50 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: MS-13 MS-13 Fig.2 Fig.1 Rear Support Pipe Insertion Area Replacing the Vertical Pipe Spacer 1. Remove the seat hite lock knob, and pull out the rear support pipe.(Fig. 1) 2. Remove the rear support pipe spacer at the rear support pipe insertion area on ...

  • Cateye EC-3600 - page 53

    EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Cateye Ergociser Series 1000 Service Manual 51 MS-14 MS-14 Fig. 1 Replacing the Leg Cover à REMOVAL 1. Remove the leg pipe from the main body. Also, remove the levelling knob. (Fig. 1) 2. Apply a screwdriver or the like to the damaged leg cover, and knock the cover off, paying attention not to dam ...

  • Cateye EC-3600 - page 54

    Cateye Ergociser Series 1000 Service Manual 52 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: MS-15 MS-15 Wood Block Caster (Level Adjuster) Fig. 2 Wood Block Front Leg with Casters (Rear Leg with Level Adjuster) Replacing the Caster and Level Adjuster 1. Loosen the screw and remove the front leg with casters (rear leg with level adjuster) from ...

  • Cateye EC-3600 - page 55

    EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Cateye Ergociser Series 1000 Service Manual 53 MS-16 MS-16 Replacing the Seat Post Knob 1. Pull out the seat post. 2. Remove the seat post knob by rotating and loosening the guide screw in the counter-clockwise direction. 3. Mount a brandnew seat post knob by securely tightening the guide screw. 4. ...

  • Cateye EC-3600 - page 56

    Cateye Ergociser Series 1000 Service Manual 54 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: MS-17 MS-17 Fig. 1 Replacing the Lock Pin 1. Remove the lock pin by rotating and loosening the guide screw in the counter-clockwise direction. 2. Mount a brandnew lock pin by securely tightening the guide screw. Lock Pin Wrench Guide Screw Replacing th ...

  • Cateye EC-3600 - page 57

    EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Cateye Ergociser Series 1000 Service Manual 55 ON OFF MS-18 MS-19 Fig. 1 Replacing the Crank Cover à REMOVAL 1. Remove both right and left pedals. (Fig. 1) 2. Loosen and remove the fixing screw on the surface of the crank cover. The narrow-width area of the crank cover should position in between t ...

  • Cateye EC-3600 - page 58

    Cateye Ergociser Series 1000 Service Manual 56 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: MS-19 MS-19 Replacing the Center Cover of Upright Type 1 . Loosen the four screws on the bottom of the control unit, remove the control unit, and then detach the cable connector. (Fig. 1) 2. For EC-1600, slide the inner pipe of the handlebar post cover ...

  • Cateye EC-3600 - page 59

    EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Cateye Ergociser Series 1000 Service Manual 57 EC - 3600 MS-20 Fig. 1 MS-20 Replacing the Center Cover of Recumbent Type * Remove the pulse rate sensor, if it is connected, before proceeding to the following procedures. 1. Remove the control unit fixing screws (4 pieces) from the main unit. (Fig. 1 ...

  • Cateye EC-3600 - page 60

    Cateye Ergociser Series 1000 Service Manual 58 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Replacing the Handlebar Grip MS-21 MS-21 Replacing the Handlebar Grip 1. In case the handlebar grip is damaged, cut the grip with a thin cutting knife and peel it off the handlebar.(Fig. 1) 2. Fit a brandnew handlebar grip onto the handlebar, utilizing ...

  • Cateye EC-3600 - page 61

    EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Cateye Ergociser Series 1000 Service Manual 59 Replacing the Printer Cover MS-22 MS-22 Printer Cover Fig.1 Upper Body of Control Unit Replacing the Printer Cover 1 . See the Items (1 &2), Section ES-6 "Replacing the Panel Keyboard." 2. Detach the existing printer cover, and mount the ...

  • Cateye EC-3600 - page 62

    Cateye Ergociser Series 1000 Service Manual 60 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models: Screws MS-23 MS-23 Fig. 1 Replacing the Paper Cutter 1. See the Items (1 &2), Section ES-6 "Replacing the Panel Keyboard." 2. Loosen and remove four screws. Also, remove the spring. (Fig. 1) 3. Remove the existing printer cutter, and moun ...

  • Cateye EC-3600 - page 63

    Cateye Ergociser Series 1000 Service Manual 61 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models List of Genuin Parts PNR.780-6101 EC-1200 Control Unit(E) Ivory PNR.780-6102 EC-1200 Control Unit(G) Ivory PNR.780-6106 EC-1200 Control Unit(E) Black PNR.780-6107 EC-1200 Control Unit(G) Black unit: pieces PNR.780-6108 EC-1200 Control Unit Multi Ivory P ...

  • Cateye EC-3600 - page 64

    Cateye Ergociser Series 1000 Service Manual 62 List of Genuin Parts EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models PNR.780-1031 EC-1600/3700 Paper Cutter unit: pieces PNR.780-1020 Paper Case unit: pieces PNR.780-1030 Paper Roller unit: pieces PNR.780-1100 EC-1200/1600 Pluse Sensor Set (1M) PNR.780-1102 EC-1200/1600 Pluse Sensor Set (1.5M) PNR.78 ...

  • Cateye EC-3600 - page 65

    Cateye Ergociser Series 1000 Service Manual 63 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models List of Genuin Parts PNR.780-6050 EC-1200/1600 Post Spacer Set unit: sets PNR.780-9610 EC-1200/1600 Seat Pillar unit: pieces PNR.780-6260 EC-1200 New Seat Pillar unit: pieces PNR.785-1417 EC-1200/1600 Seat Post Knob unit: pieces PNR.781-5120 EC-3600/370 ...

  • Cateye EC-3600 - page 66

    Cateye Ergociser Series 1000 Service Manual 64 List of Genuin Parts EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models PNR.780-6180 EC-1200/1600 Caster Pipe Set unit: sets PNR.780-6550 EC-1600 Vibration-proof Rubber unit: pieces PNR.780-6445 EC-1200/EC-1600 Front Leg with Cover Set unit: sets PNR.780-6446 EC-1200/EC-1600 Rear Leg with Cover Set unit ...

  • Cateye EC-3600 - page 67

    Cateye Ergociser Series 1000 Service Manual 65 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models List of Genuin Parts PNR.780-6230 EC-1200/1600 Chain PNR.781-5570 EC-3600/3700 Chain unit: pieces PNR.781-9200 Cartridge BB (YST-986A) unit: sets PNR.780-6250 Crank Set unit: sets PNR.780-6240 EC-1200/1600 Inlet Metal Base unit: sets PNR.780-6241 EC-360 ...

  • Cateye EC-3600 - page 68

    EC-1200B EC-1600B EC-3600B EC-3700B Cateye Ergociser Series 1000 Service Manual 66 List of Genuin Parts (Belt Drive) Applicable Models PNR.780-7050 EC-1600B/1200B Workload Unit PNR.781-5581 EC-3700B/3600B Workload Unit unit: pieces PNR.780-7030 Idler A Set unit: sets PNR.780-7040 Idler Spring A unit: pieces PNR.780-7010 Pulley 1-B unit: pieces PNR. ...

  • Cateye EC-3600 - page 69

    Cateye Ergociser Series 1000 Service Manual 67 EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models List of Genuin Parts PNR.752-1085 Hexagon Nut M8-3 unit: pieces PNR.750-9616 Screw Set(+) M6x16 unit: pieces PNR.756-1412 Tapping Screw 4x12 with Washer unit: pieces PNR.750-1390 Spacer Spring unit: pieces PNR.724-4803 Crank Nut M10x1.25 unit: pieces PN ...

  • Cateye EC-3600 - page 70

    Cateye Ergociser Series 1000 Service Manual 68 List of Genuin Parts EC-1200 EC-1600 EC-3600 EC-3700 Applicable Models R R R R PNR.780-6350 EC-1200/1600 Tool Kit unit: sets PNR.781-5180 EC-3600/3700 Tool Kit unit: sets PNR.758-1000 Cotterless Gear Crank Removing / Fastening Tool unit: sets PNR.781-9210 Cartridge BB Removing Tool unit: sets PNR.758-1 ...

  • Cateye EC-3600 - page 71

    CO . , L TD. ® TEL: 81-6-6719-2631 FAX: 81-6-6719-2363 Copyright © Feb. 1995 CAT EYE Co., Ltd. ECSM1E-991007-PDF 2-8-25, Kuwazu, Higashi Sumiyoshi-ku, OSAKA, 546-0041 JAPAN ...

Manufacturer Cateye Category Bicycle

Documents that we receive from a manufacturer of a Cateye EC-3600 can be divided into several groups. They are, among others:
- Cateye technical drawings
- EC-3600 manuals
- Cateye product data sheets
- information booklets
- or energy labels Cateye EC-3600
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cateye EC-3600.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cateye EC-3600, service manual, brief instructions and user manuals Cateye EC-3600. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cateye EC-3600.

Similar manuals

A complete manual for the device Cateye EC-3600, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cateye EC-3600 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cateye EC-3600.

A complete Cateye manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cateye EC-3600 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cateye EC-3600, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cateye EC-3600, that we can find in the current document
3. Tips how to use the basic functions of the device Cateye EC-3600 - which should help us in our first steps of using Cateye EC-3600
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cateye EC-3600
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cateye EC-3600 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cateye EC-3600?

Use the form below

If you did not solve your problem by using a manual Cateye EC-3600, ask a question using the form below. If a user had a similar problem with Cateye EC-3600 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)