Manual Salton FSCM100

16 pages 0.57 mb
Download

Go to site of 16

Summary
  • Salton FSCM100 - page 1

    USE & CARE INSTRUCTIONS 10 CUP PROGRAMMABLE COFFEEMAKER FSCM100 SPECIAL SELECT ...

  • Salton FSCM100 - page 2

    1 IMPOR T ANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. T o protect against fire, electric shock, and injury to persons, ...

  • Salton FSCM100 - page 3

    2 W ARNING: This appliance generates heat and escaping steam during use. Use proper precautions to prevent the risk of burns, fires, or other injury to persons or damage to property . 1. Do not pour liquid other than water and the cleaning solution specified in this manual into the W ater Reservoir . 2. Coffeemaker must be left to cool down for app ...

  • Salton FSCM100 - page 4

    3 POLARIZED PLUG This appliance has a polarized plug (one blade is wider than the other). T o reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way . If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the p ...

  • Salton FSCM100 - page 5

    GETTING TO KNOW YOUR F ARBERW ARE ® 10 CUP COFFEEMAKER 1. W ater Reservoir Lid (P/N 30654) 2. Swing-Out Filter Basket (P/N 30651) 3. W ater Reservoir 4. Carafe Lid (P/N 30652) 5. Control Panel 6. Polarized Plug 7. W arming Plate 8. Carafe w/Lid (P/N 30653) 9. Drip Stop Assembly (P/N 30781) 10. W ater Level Indicator 1 1 . Removable Filter Basket A ...

  • Salton FSCM100 - page 6

    5 AUTO OFF ON ON HOUR MIN. BREW CONTROL P ANEL REMOV ABLE FIL TER BASKET AM/PM AUTO ON ON/ BREWING AUTO/OFF/ON Switch GETTING TO KNOW YOUR COFFEEMAKER (Cont.) T o remove the Removable Filter Basket for cleaning, pull Basket straight up and out of the machine. After cleaning, the Removable Filter Basket must be pushed all the way into the Swing-Out ...

  • Salton FSCM100 - page 7

    6 INSTRUCTIONS FOR USE BEFORE BREWING COFFEE FOR THE FIRST TIME CAUTION: T o protect against electric shock, do not submerge the Coffeemaker or allow AC cord to come into contact with water or other liquids. 1. After carefully unpacking from carton, the inside of your Coffeemaker and Carafe must be cleaned. 2. Brew 10 cups of fresh water only . Fol ...

  • Salton FSCM100 - page 8

    7 DRIP STOP FEA TURE This F ARBERW ARE ® Coffeemaker has an Automatic Drip Stop Feature. During the brewing cycle, the Carafe can be removed to pour a cup of coffee from the Carafe. The Drip Stop Feature will prevent the Coffeemaker from continuing to brew coffee for up to one minute until the Carafe is returned to its proper position. IMPORT ANT ...

  • Salton FSCM100 - page 9

    8 BREWING COFFEE IN YOUR F ARBERW ARE ® 10 CUP PROGRAMMABLE COFFEEMAKER CAUTION: Use this product with proper AC voltage rating only . Be sure to unplug the power cord when Coffeemaker is not in use for extended periods of time. 1. Lift the Carafe Lid. Fill the Carafe with cold water to the level for the desired number of cups (1-10). Open the W a ...

  • Salton FSCM100 - page 10

    9 SETTING THE CLOCK / TIMER 1. Set the T imer to the correct time of the day by pushing the HOUR Button until the correct hour appears on the LCD Display . Then push the MIN. Button to the current minutes. Be sure to note a.m. and p.m. times. NOTE: The LED in the upper-left corner of the Display indicates the P .M. hours. (See Figure 3.) 2. T o pro ...

  • Salton FSCM100 - page 11

    4. T o set Coffeemaker to brew coffee using Automatic Start-Up feature: Move the Slider to the AUTO position. The ON LED will turn off. The AUTO Indicator Light will illuminate. (See Figure 6.) At the programmed time, the Coffeemaker turn itself on automatically . The ON LED will turn on as the Coffeemaker begins brewing and c offee will begin flow ...

  • Salton FSCM100 - page 12

    11 7. T o brew a second pot of coffee, turn the Coffeemaker off for 10 minutes and allow it to cool. Empty used coffee grounds and repeat steps for brewing coffee.. CAUTION: Failure to allow Coffeemaker to cool may cause water to overheat and spray hot steam. The hot steam can cause severe burns. 8. The T imer will automatically shut-off the applia ...

  • Salton FSCM100 - page 13

    12 USER MAINTENANCE INSTRUCTIONS CARING FOR YOUR CARAFE A damaged Carafe may result in possible burns from hot liquid. T o avoid breaking a Carafe: 1. Do not allow all liquid to evaporate from Carafe while on the W arming Plate. Do not heat Carafe when empty . If this happens, discard Carafe. 2. Discard Carafe if damaged in any manner . A chip or c ...

  • Salton FSCM100 - page 14

    13 MINERAL DEPOSITS AND DECALCIFYING Y our F ARBERW ARE ® Coffeemaker must be cleaned when you begin to notice excessive steaming or the brewing time increases considerably . This condition is caused by a buildup of lime and mineral deposits from your water . If the pumping action stops before all the water has been pumped out of the machine, then ...

  • Salton FSCM100 - page 15

    14 DECALCIFYING YOUR CARAFE Hard water can leave a whitish mineral deposit inside your Carafe. Coffee discolors these deposits, sometimes leaving a brownish stain inside the Carafe. T o remove these stains, follow these simple steps: 1. Use a solution of equal parts white vinegar and hot water . 2. Let solution stand in Carafe for about 20 minutes ...

  • Salton FSCM100 - page 16

    ONE-YEAR LIMITED W ARRANTY This F ARBERW ARE® product warranty extends to the original consumer purchaser of the product. Warranty Duration: This product is warranted to the original consumer purchaser for a period of one (1) year from the original purchase date. Warranty Coverage: This product is warranted against defective materials or workmansh ...

Manufacturer Salton Category Coffeemaker

Documents that we receive from a manufacturer of a Salton FSCM100 can be divided into several groups. They are, among others:
- Salton technical drawings
- FSCM100 manuals
- Salton product data sheets
- information booklets
- or energy labels Salton FSCM100
All of them are important, but the most important information from the point of view of use of the device are in the user manual Salton FSCM100.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Salton FSCM100, service manual, brief instructions and user manuals Salton FSCM100. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Salton FSCM100.

Similar manuals

A complete manual for the device Salton FSCM100, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Salton FSCM100 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Salton FSCM100.

A complete Salton manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Salton FSCM100 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Salton FSCM100, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Salton FSCM100, that we can find in the current document
3. Tips how to use the basic functions of the device Salton FSCM100 - which should help us in our first steps of using Salton FSCM100
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Salton FSCM100
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Salton FSCM100 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Salton FSCM100?

Use the form below

If you did not solve your problem by using a manual Salton FSCM100, ask a question using the form below. If a user had a similar problem with Salton FSCM100 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)