English dropdown-ico

Manual IBM YY-R5xx

14 pages 0.42 mb
Download

Go to site of 14

Summary
  • IBM YY-R5xx - page 1

    ZZ17-W2001-B 1 YY -W2xx Pedest al Server Chassis YY -R5xx 5U Rackmount Server Chassis Installation Guide 2005.04. V ersion B ...

  • IBM YY-R5xx - page 2

    ZZ17-W2001-B 2 INDEX 1. Intr oduction 2. Hardwar e Packing List 3. System Installation 3.1.Chassis Open 3.2.Motherboard Installation 3.3.Add-on Card Installation 3.4.CD–ROM D rive/FDD Installation. 3.5.Fixed HDD Cage , HDD Installation 3.6.Instructions for Switches and LED Indicators on front panel 3.7.Instructions for cooling fan assembly 3.8.Ra ...

  • IBM YY-R5xx - page 3

    ZZ17-W2001-B 3 1. INTRODUCTION YY -W2 series Server Chassis is designed in compliant with EEB3.0 specification (refer to www .ssiforum.or g ) and A TXV2.1 (refer to www .form factors.org) Mother Board: z YY -W2 is designed for extended A TX (12"x13"), in com pliant with A TX spec, CEB and EEB3.0 spec. z S t o r a g e : The chassis s ...

  • IBM YY-R5xx - page 4

    ZZ17-W2001-B 4 Thermal Solution: z One(1) 120x120mm Cooling Fan is installed, rear mounted z Options of two (2) 60*60*25mm , rear mounted. Switches and LED Indicators on front panel z Power Switch (Push Switch) z Reset Button (Push Switch) z Power On LED (G reen) z HDD LED (Orange flash) z F AN ALARM (Red) z LAN LED (Green/F ...

  • IBM YY-R5xx - page 5

    ZZ17-W2001-B 5 2. Hardware Packing List When you unpack your YY -W2 Server Chassis, check that all the items that you ordered are present in good condition. Review the inventory checklist below to be sure that the components and optional components that you ordered are included. If anything is missing or damage, contact your retailer as soon as pos ...

  • IBM YY-R5xx - page 6

    ZZ17-W2001-B 6 3. System Installation 3.1 Chassis Open T o release two (2) screws on the rear side of chassis, pull the side cover with handle. 3.2 Motherboard Installation Check mounting holes of motherboard, to screw the standof fs required to chassis. Put the Motherboard into the chassis, than screw in for fixing. Next step is to plug the DC A T ...

  • IBM YY-R5xx - page 7

    ZZ17-W2001-B 7 3.3 PCI Add-on Card Installation Remove the tail gate bracket, install PCI card into motherboard, and screw in bracket to rear window of chassis. The chassis could be optional required A Card Clamp Holder which is used to clamp the Add-on Card for avoiding any popping issue. T o remove The Clamp Holder first, install Add-on Cards as ...

  • IBM YY-R5xx - page 8

    ZZ17-W2001-B 8 T o remove the front panel fist, the front panel is snap in chassis with hocks (or/and screw on by 4pcs screws), please screw of f the screws and pull the front panel forward. z T o remove the metal covers (vented panel). z Screw a pair of rails to drive. z Slide in the drive install chassis. z Screw in two (2) 6#32 on th ...

  • IBM YY-R5xx - page 9

    ZZ17-W2001-B 9 T o screw off four (4) screws in the front plate of chassis, the HDD cage could be removed from chassis, install HDD into cage. The cooling fan of HDD cage could be easy swap, release two thumb screws in the front of HDD cage, lift of f the fan holder , swap fan and assembly again into cage. How to use HDD brackets YY -W2 Server Chas ...

  • IBM YY-R5xx - page 10

    ZZ17-W2001-B 10 3.6 Instructions for Switches and LED Indicators on front panel The switches and led indicato rs on front panel have the functions as following: POWER SW : Push Switch, The system power on/of f, c onnects t o M / B . Reset SW : Push switch, connect to M/B x POWR LED: The system power LED (green), connect to M/B. x POWER F AILU ...

  • IBM YY-R5xx - page 11

    ZZ17-W2001-B 11 Optional Intrusion Switch The chassis could be built with intrusion switch, assembly in left side of chassis, when side cover removed the system will alarm for intrusion, if connected. 3.7. Instructions for cooling fan assembly The chassis could be mounted optional two 60x60 cooling fans in rear mounted for strengthen the air flow b ...

  • IBM YY-R5xx - page 12

    ZZ17-W2001-B 12 3.9 System Assembly When above steps are done, properly connect all accessories to the system. Then the user can start to install the O/S and required software to the system according to the instruction on the m anual of Motherboard. 4. Intr oduction of IDE/SCSI/SA T A multi-bay backplane modules YY -W 2 Server Chassis could be opti ...

  • IBM YY-R5xx - page 13

    ZZ17-W2001-B 13 5. How to change versatile as Rackmount Chassis (5U) 1. T o remove top cover and bottom cover of chassis. 2. Screw in rack bracket and handles T ype A+ SI-0357 x 1 T ype A+ SI-0237 x 2 ...

  • IBM YY-R5xx - page 14

    ZZ17-W2001-B 14 3. Slide into EIA cabinet ...

Manufacturer IBM Category Network Card

Documents that we receive from a manufacturer of a IBM YY-R5xx can be divided into several groups. They are, among others:
- IBM technical drawings
- YY-R5xx manuals
- IBM product data sheets
- information booklets
- or energy labels IBM YY-R5xx
All of them are important, but the most important information from the point of view of use of the device are in the user manual IBM YY-R5xx.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals IBM YY-R5xx, service manual, brief instructions and user manuals IBM YY-R5xx. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product IBM YY-R5xx.

Similar manuals

A complete manual for the device IBM YY-R5xx, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use IBM YY-R5xx by users. Manuals are usually written by a technical writer, but in a language understandable to all users of IBM YY-R5xx.

A complete IBM manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual IBM YY-R5xx - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the IBM YY-R5xx, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the IBM YY-R5xx, that we can find in the current document
3. Tips how to use the basic functions of the device IBM YY-R5xx - which should help us in our first steps of using IBM YY-R5xx
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with IBM YY-R5xx
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of IBM YY-R5xx in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning IBM YY-R5xx?

Use the form below

If you did not solve your problem by using a manual IBM YY-R5xx, ask a question using the form below. If a user had a similar problem with IBM YY-R5xx it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)