English dropdown-ico

Manual Miele 37432 iD

31 pages 1.14 mb
Download

Go to site of 31

Summary
  • Miele 37432 iD - page 1

    Installation instructions Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information. To prevent accidents and machine damage read these instructions before installation or use. 70 KFNS 37432 iD ...

  • Miele 37432 iD - page 2

    Disposing of packaging materials The packaging is designed to protect the appliance from damage during transport. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Recycling the packaging reduces the use of raw materials in the manufacturing process and also reduces the ...

  • Miele 37432 iD - page 3

    , Failure to follow these instructions can result in death, fire, or electrical shock. Improper connection of the equipment grounding conductor may result in electric shock. If you are in any doubt as to whether the appliance has been properly grounded, have the appliance checked by a qualified electrician or service technician. Installation, repai ...

  • Miele 37432 iD - page 4

    The appliance must be connected to an electrical outlet that is properly grounded. The electrical installation must comply with the applicable electrical code. The outlet must be easily accessible and not concealed behind the appliance so that the appliance can quickly be disconnected from the electricity supply in an emergency. The plug and power ...

  • Miele 37432 iD - page 5

    Safe operation of the appliance is only assured if it has been installed and connected in accordance with these operating and installation instructions. WARNING! Danger of tilting! To avoid a hazard due to instability of the appliance, it must be fixde in accordance with the instructions. Side-by-side The KFNS 37432 iD has two side-wall heaters enc ...

  • Miele 37432 iD - page 6

    Climate class The appliance is designed for use within a certain climate class (room temperature) and should not be used outside this range. The climate class for your appliance is stated on the data plate inside the appliance. Climate class Room temperature SN N ST T +10 °C to +32 °C +16 °C to +32 °C +16 °C to +38 °C +16 °C to +43 °C Opera ...

  • Miele 37432 iD - page 7

    Top ventilation opening There are different options available for constructing the top ventilation opening: a Directly above the appliance with a vent grille (free airflow of at least 200 cm 2 ) b In between the cabinet unit and the ceiling c Through a suspended ceiling. Ventilation grill During construction the ventilation grill can be built-in. ^ ...

  • Miele 37432 iD - page 8

    Before installing the appliance ^ Before installation, remove the accessories bag with the installation components and other accessories from the appliance, and remove the sealing strip from the appliance door. ^ Do not remove any of the following from the back of the appliance: – The spacers (depending on model). These ensure that the required d ...

  • Miele 37432 iD - page 9

    Before installation, make sure that the cabinet space matches the required dimensions. The specified measurements for the ventilation openings must be adhered to in order to ensure the proper functioning of the appliance. Height of space [mm] A Freezer [mm] B KFNS 37432 iD 1772 – 1788 695 Installation dimensions 78 ...

  • Miele 37432 iD - page 10

    The factory setting for the door hinges allows them to open at a wide angle. However, if the opening angle of the door needs to be limited for any reason, the hinge can be adjusted to accommodate this. – For example, the opening angle can be limited to 90° if the appliance door were to otherwise hit an adjacent wall when opened. ^ Insert the lim ...

  • Miele 37432 iD - page 11

    When reversing the door hinging, always enlist the help of another person. The appliance comes with right-hand door hinging. If left-hand hinging is required, the door hinging must be reversed: To reverse the door hinging, you will need the following tools : ^ Open both appliance doors. ^ Remove the shelves / bottle shelf from the appliance door. ^ ...

  • Miele 37432 iD - page 12

    ^ Slightly loosen the screws e and f on the hinges. ^ Slide the doors g and h outwards and take them off their hinges. ^ Remove the screws e completely. ^ Place the mounting bracket i on the opposite side and loosely screw in the screws e . ^ Remove screws e completely and loosely screw them in on the opposite side. If you had inserted pins into th ...

  • Miele 37432 iD - page 13

    Carry out the following steps on both doors. Removing the soft-close mechanism Caution! When removed from the appliance, the soft-close mechanism will snap shut. Risk of injury! ^ After detaching the door, lay it face down on a stable surface. ^ Remove the soft-close mechanism j from the ball joint. ^ Unscrew the mount k and pull the soft-close mec ...

  • Miele 37432 iD - page 14

    Attaching the soft-close mechanism ^ Now turn over the appliance door so that it lies face down. ^ Screw the mount k onto the hinge and firmly tighten. ^ Pull the soft-close mechanism so that it extends j and hook it onto the ball joint. ^ Slide the appliance doors g and h onto the premounted screws e and f , and firmly tighten the screws e and f . ...

  • Miele 37432 iD - page 15

    Two people are required to install the appliance. ^ The appliance must be installed in a stable, solid cabinet unit that is positioned on an even and level floor. ^ Secure the cabinet unit against tipping. ^ Use a level to align the cabinet unit. The cabinet corners must be at a 90° angle to each other, otherwise the cabinet door will not rest cor ...

  • Miele 37432 iD - page 16

    You will need the following installation components Each installation component is designated by a number. The component's number can also be found in the installation steps on the following pages. – For installing the appliance in the cabinet space: – For mounting the cabinet door: All installations instructions shown here are for a right ...

  • Miele 37432 iD - page 17

    ^ Slide the cover strip tabs a into position. ^ Screw the mounting bracket d onto the pre-drilled holes in the appliance door using the hex screw e . Securely attach a second pair of mounting brackets d in the handle area of the door using the pre-drilled holes in the appliance door. ^ Slide the appliance two-thirds of the way into the cabinet spac ...

  • Miele 37432 iD - page 18

    ^ Remove the cover f . ^ Loosely screw the mounting bracket g onto the top left corner of the appliance using the screws h .D o not tighten the screws; the bracket should still be able to slide from side to side. ^ Attach the fitting piece i to the mounting bracket j . ^ Loosely screw the mounting bracket j to the base of the appliance using the sc ...

  • Miele 37432 iD - page 19

    Installing the appliance ^ Slide the appliance into the cabinet space until the covers of the mounting brackets touch the front edge of the cabinet side wall. – n For 5/8" (16 mm) walls: The spacers should touch the front edge at the top and bottom of the cabinet side wall. – o For 3/4" (19 mm) walls: The front edges of the top and bo ...

  • Miele 37432 iD - page 20

    Securing the appliance in the cabinet space ^ Push the hinged side of the appliance against the cabinet wall. ^ Screw the particleboard screws s through the hinge plates at the top, bottom and then in the middle of the appliance to secure it to the cabinet. ^ Slide the loose bracket against the cabinet wall. ^ Fasten the mounting bracket j to the c ...

  • Miele 37432 iD - page 21

    ^ Snap the protruding ends off of the mounting brackets. They are no longer needed and can now be disposed of. ^ Attach the covers f and u to the corresponding mounting brackets. For added stability of the appliance in the cabinet unit, slide the included rods between the cabinet floor and the bottom of the appliance: ^ First, attach the handle v t ...

  • Miele 37432 iD - page 22

    Mounting the cabinet doors. The cabinet door must have a minimum thickness of 5/8" (16 mm) and a maximum thickness of 3/4" (19 mm). The following gap sizes must be maintained: – The gap between the cabinet door and the unit door above must be at least 0,1'' (3 mm). – The vertical gap between cabinet doors should also be abou ...

  • Miele 37432 iD - page 23

    Carry out the following steps on both doors. ^ The factory setting for the distance between the appliance door and the mounting frame is 8 mm. Double check this distance and adjust if necessary. ^ Slide the fitting aids b up to the height of the cabinet door: The bottom edge X of the fitting aids must be at the same height as the top edge of the ca ...

  • Miele 37432 iD - page 24

    ^ Lay the cabinet door face down on a stable surface. ^ Using a pencil, lightly mark a line down the centre of the inside of the cabinet door e . ^ Hang the mounting frame d with the fitting aids onto the inside of the cabinet door. Align the mounting frame centrally. ^ Fasten the mounting frame using at least 6 short particleboard screws f . (On c ...

  • Miele 37432 iD - page 25

    ^ Open the appliance door. ^ Hang the cabinet door onto the alignment bolts h . ^ Loosely screw the nuts c onto the adjustment bolts. ^ Close the door and check the distance between the door and the adjacent cabinet doors. The gaps should be even. Adjusting the position of the door – Lateral adjustments (X) ^ Move the cabinet door. – Vertical a ...

  • Miele 37432 iD - page 26

    ^ Tighten the nuts c on each of the appliance doors using a box-end wrench j while holding the alignment bolts c in place using a screwdriver. ^ The cover strip k must be completely hidden in cabinet space. It must not protrude. ^ Drill the mounting holes l in the cabinet door and fasten the screws m . Make sure the two metal edges are aligned flus ...

  • Miele 37432 iD - page 27

    ^ Tighten all screws again. ^ Replace each of the top covers o , and click it into place. ^ Replace the side covers p , making sure you hear them click into place. The following confirm that the appliance has been correctly installed: – The doors close properly. – The doors do not touch the cabinet body. – The seals at the top corner of the h ...

  • Miele 37432 iD - page 28

    97 ...

  • Miele 37432 iD - page 29

    98 ...

  • Miele 37432 iD - page 30

    99 ,PSRUWHU 0LHOH/LPLWHG +HDGTXDUWHUVDQG0LHOH&HQWUH &OUR6ALLEY$RIVE 6AUGHAN/.,+6 WWWMIELECA &XVWRPHU&DUH&HQWUH 0HONE CUSTOMERCARE MIELECA -IELE#IE+' #ARL-IELE3TRAE ? ...

  • Miele 37432 iD - page 31

    M.-Nr. 09 969 830 / 01 e n-C A KFNS 37432 iD ...

Manufacturer Miele Category Refrigerator

Documents that we receive from a manufacturer of a Miele 37432 iD can be divided into several groups. They are, among others:
- Miele technical drawings
- 37432 iD manuals
- Miele product data sheets
- information booklets
- or energy labels Miele 37432 iD
All of them are important, but the most important information from the point of view of use of the device are in the user manual Miele 37432 iD.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Miele 37432 iD, service manual, brief instructions and user manuals Miele 37432 iD. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Miele 37432 iD.

Similar manuals

A complete manual for the device Miele 37432 iD, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Miele 37432 iD by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Miele 37432 iD.

A complete Miele manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Miele 37432 iD - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Miele 37432 iD, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Miele 37432 iD, that we can find in the current document
3. Tips how to use the basic functions of the device Miele 37432 iD - which should help us in our first steps of using Miele 37432 iD
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Miele 37432 iD
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Miele 37432 iD in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Miele 37432 iD?

Use the form below

If you did not solve your problem by using a manual Miele 37432 iD, ask a question using the form below. If a user had a similar problem with Miele 37432 iD it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)