English dropdown-ico

Manual Rosewill RNX-N360PC

45 pages 2.31 mb
Download

Go to site of 45

Summary
  • Rosewill RNX-N360PC - page 1

    Wireless N PCI Adapter RNX-N360PC User Manual 1910020413 ...

  • Rosewill RNX-N360PC - page 2

    FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rule s. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and c an radiate radio frequency ener g y and, if ...

  • Rosewill RNX-N360PC - page 3

    National Restrictions 2400.0-2483.5 MHz Country Restriction Reason/remark Bulgaria General authorization required for outdoor use and public service France Outdoor use limited to 10 mW EIRP. within the band 2454-2483.5 MHz Military Radiolocation us e. Refarming of the 2.4 GHz band has been ongoing i n recent years to allow current relaxed regulatio ...

  • Rosewill RNX-N360PC - page 4

    Table of Content Package C ontents .......................................................................................... 1 Chapter 1 Overview ...................................................................................... 2 1.1 Overview of the pr oduct ................................................................... 2 1.2 Features .. ...

  • Rosewill RNX-N360PC - page 5

    1 Package Contents The following items should be found in your package: ¾ One RNX-N360PC Wireless N PCI Adapter ¾ Quick Install ation Guide ¾ One Resource CD for RNX-N360PC, including: • Wireless N Client Utility and Drivers • User Guide • Other Helpful Information ) Note: Make sure that the package contains the above items. If any of the ...

  • Rosewill RNX-N360PC - page 6

    2 Chapter 1 Overview Thank you for choosing RNX-N360PC Wireless N PCI Adapter . 1.1 Overview of the product The adapter is an 802.1 1n client device; it is designed to provide a high-speed and unrivaled wireless performance for your notebook . With a faster wireless connection, you can get a better Internet experience, such as downloading, gaming, ...

  • Rosewill RNX-N360PC - page 7

    3 ¾ Provides 32-bit PCI interface ¾ Supports Ad-Hoc and Infrastructure modes ¾ Good capability on anti-jamming ¾ Supports roaming between access points when co nfigured in Infrastructure mode ¾ Ease to configure and prov ides monitoring information ¾ Supports Windows 2000/ XP/ Vist a/ 7 ¾ Three External antennas which are li sted in a format ...

  • Rosewill RNX-N360PC - page 8

    4 Chapter 2 Installation Guide 2.1 Hardware Inst allation T o install the adapter , follow these steps listed below: 1. T urn off your desktop PC and disconnect the power . 2. Remove your PC case and locate an ava ilable PCI slot on the motherboard. Remove the metal slo t cover on the back of the PC. Check with your com puter manufacturer for instr ...

  • Rosewill RNX-N360PC - page 9

    5 Figure 2-1 2. Soon, Figure 2-2 will display after a moment. Click Next to continue. Figure 2-2 3. After that, you should choose a Setup type. It is recommended that you select Inst all Client Utilities and Driver . Select Inst all Driver Only to install driver only (shown in Figure 2-3). Click Next to continue. ...

  • Rosewill RNX-N360PC - page 10

    6 Figure 2-3 4. Click Browse to change the destination locati on for the software, then click Next in the screen below (shown in Figure 2-4). Figure 2-4 5. After that, select the program folder , y ou should create a new folder name or select one from the Existing Folders list. It is recommended that you keep the default setting. Click Next to cont ...

  • Rosewill RNX-N360PC - page 11

    7 Figure 2-5 6. Choose configurati on tool, if you are not sure, please leave it default. Then click Next to continue. Figure 2-6 7. W ait a while for the setup as shown in Figure 2-7. ...

  • Rosewill RNX-N360PC - page 12

    8 Figure 2-7 ) Note: 1) For Windows XP, the Set up Wizard will notify you of how to proceed with the installation duringthese steps (shown in Figure 2-8 ). Our drivers have be en tested thoroughly, and are able to work with the operating system. Click Continue Anyway to continue the Installation. Figure 2-8 2) In Windows 2000, the warning screen is ...

  • Rosewill RNX-N360PC - page 13

    9 select Yes to continue installation. Figure 2-9 8. After all the step s above, you will see the screen below , click Finish to complete the installation. Figure 2-10 2.2.3 Softw are Installation for Windows Vista 1. Insert the Resource CD into your CD-ROM drive, and open the folder named RNX-N360PC. Double-click Setup.exe in the proper folder to ...

  • Rosewill RNX-N360PC - page 14

    10 then the following screen for preparing setup will appear . Figure 2-11 2. Soon, Figure 2-12 will display after a moment. Click Next to continue. Figure 2-12 3. Click Ye s to continue. ...

  • Rosewill RNX-N360PC - page 15

    11 Figure 2-13 4. The following page will display and please wait a moment. Figure 2-14 ) Note: For Windows Vista, the Setup Wizard will notify you of how to proceed with the installation during these steps (shown in Figure 2-15 ). Ou r drivers have been tested thoroughly, a nd are able to work with the operating system. Click Install this driver s ...

  • Rosewill RNX-N360PC - page 16

    12 Figure 2-15 5. Click Finish to complete the installation. Figure 2-16 2.2.4 Software Installation for Windows 7 1. Insert the Resource CD into your CD-ROM drive. T o continue, find the CD/DVD dri ve where the installation CD was placed. Open RNX-N360PC folder , and doub le-click Setup.exe . Then you will see Figure 2-17. ...

  • Rosewill RNX-N360PC - page 17

    13 Figure 2-17 2. Soon, Figure 2-18 will display after a moment. Click Next to co ntinue. Figure 2-18 3. W ait a while for the setup as shown in Figure 2-19. ...

  • Rosewill RNX-N360PC - page 18

    14 Figure 2-19 ) Note: For Windows 7, the Setup Wi zard will notify you about the Windows Security with the installation during t hese steps (shown in Figure 2-20 ). Our drivers have been tested thoroughly, and are able to work with the operating system. Click Install this driver software anyway to continue the installation. Figure 2-20 4. Then you ...

  • Rosewill RNX-N360PC - page 19

    15 Figure 2-21 ...

  • Rosewill RNX-N360PC - page 20

    16 Chapter 3 Configuration Guide RNX-N360PC can be configured by Wireless N C lient Utility . This chapter describes how to configure your Adapter for wireless connec tivity on your Wireless Local Area Network (WLAN) and use the data secu rity encryption features. After Inst alling the Adapter , the Adapter ’s tray icon will appear i n your syste ...

  • Rosewill RNX-N360PC - page 21

    17 Figure 3-1 The following table describes the item s found on the Current S tatus screen. ¾ Profile Name - This shows the name of current selected configuration profile. The configuration of Profile nam e will be described on the General tab of Profile Management . ¾ Link St atus - This shows whether the st ation is associated to the wireless n ...

  • Rosewill RNX-N360PC - page 22

    18 ¾ Add a new profile ¾ Modify a Profile ¾ Remove a Profile ¾ Activate a Profile ¾ Import a Profile ¾ Export a Profile ¾ Scan Available Networks ¾ Order profiles Figure 3-2 3.2.1 Add or Modify a Configuration Profile T o add a new configur ation profile, click New on the Profile Management tab. T o modify a configuration profile, select th ...

  • Rosewill RNX-N360PC - page 23

    19 Figure 3-3 2. Edit the Security t ab Select the Security tab in the screen above, and then you can edit the fields to configure the profile. T o define the security mode, sele ct the radio button of the desired security mode as follows. Figure 3-4 ¾ WP A/WP A2: Wi-Fi Protected Access ¾ WP A/WP A2 Passphrase: Wi-Fi Protected Access Passphrase ? ...

  • Rosewill RNX-N360PC - page 24

    20 both the access point and the station. T o define shared encryption keys, choose the Shared Key radio button and click Configure to fill in the Define Shared Keys window (shown in Figure 3-5). ) Note: The WEP security mode is not available for 802.1 1n. ¾ None: No security (not recommended). ) Note: If the access point which the Adapter is asso ...

  • Rosewill RNX-N360PC - page 25

    21 Figure 3-6 ¾ Power Save Mode - Please select the power save mode in the drop-down list. • Maximum- Selects maximum mode to let the access point buffer incoming messages for the Adapter . The Adapter will detect t he access point if any messages are waiting periodically . • Normal - Normal mode uses maximum when retrieving a large numbe r of ...

  • Rosewill RNX-N360PC - page 26

    22 Adapter uses. The channels available depe nd on the regul atory domain. If the adapter finds no other ad hoc adapters, the channel that t he adapter starts the ad hoc network with will be selected automatically . The Adapter must match the wireless mode and channel of the c lients it associates. ¾ 802.1 1 Authentication Mode : Select which mode ...

  • Rosewill RNX-N360PC - page 27

    23 3.2.4 Export a profile 1. From the Profile Management screen (shown in Figure 3-2), highlight the profile to export. 2. Click Export… , the Export Profile window will then appear below. 3. Browse the directory to export the profile to. 4. Click Save . The profile should then be expo rted to the specified location. Figure 3-8 3.2.5 Import a Pro ...

  • Rosewill RNX-N360PC - page 28

    24 Figure 3-9 3.2.6 Scan Available Networks 1. Click Scan on the Profile Management screen (shown in Figure 3-2), the Available Infrastructure and Ad Hoc Networks window will appear below . 2. Click Refresh to refresh the list at any time. 3. Highlight a network name and click Activate to connect to an available network. If no configuration profile ...

  • Rosewill RNX-N360PC - page 29

    25 Figure 3-11 3. Highlight the profiles to add to auto profile selection, and click Add . The profile will appear in the Auto Selected Profiles box. 4. Highlight a profile in the Auto Selected Profiles box. 5. Click Move Up or Move Down as appropriate. ) Note: The first profile in the Auto Selected Profiles box has highest priority, while the last ...

  • Rosewill RNX-N360PC - page 30

    26 ¾ Broadcast frames transmitted and received ¾ Unicast frames tr ansmitted and received ¾ T otal bytes transmitted and received Figure 3-12 3.3.1 Check Driver Information Click the Adapter Information button in the screen abov e, you will see the adapt er information, including general informati on about the wireless net work adapter and the N ...

  • Rosewill RNX-N360PC - page 31

    27 Figure 3-13 3.4 Configuration for Windows Vist a After the Adapter's driver has been install ed, Windows Vista will display a wireless Network Connection message like this one. Figure 3-14 T o establish a connection, pl ease follow the steps below . 1. Right-click the icon in your system tray , then click Connect to a net w ork . Figure 3-1 ...

  • Rosewill RNX-N360PC - page 32

    28 Figure 3-16 3. T o continue, click Connect Anyway . Click the Cancel button to end the connection. Figure 3-17 4. If the connection is successfully est ablished, the following screen will appear , click Close to finish the connection. ...

  • Rosewill RNX-N360PC - page 33

    29 Figure 3-18 3.5 Configuration for Windows 7 Wireless N Client Utility is not available for Windows 7. So after the Adapter's driver has been installed, we have to use Windo ws WLAN Autoconfig to establish a connection. Please follow the steps below . ...

  • Rosewill RNX-N360PC - page 34

    30 1. Right-click the icon at the bottom of your screen in your system tray and then you will see the available wireless network lis t. Select the SSID of your Access Point, take rosewill for example . Click Connect . Figure 3-19 2. If your wireless network is secured, you will be required to enter the security key as shown in Figure 3-20. Enter th ...

  • Rosewill RNX-N360PC - page 35

    31 3. If the key entered is correct, you will successfully connect to the network as shown in Figure 3-21. Figure 3-21 ...

  • Rosewill RNX-N360PC - page 36

    32 Chapter 4 WPS Configuration WPS (Wi-Fi Protected Setup) function allo ws you to add a new wireless device to an existing network quickly . If the wireless card supports WPS, you c an est ablish a wireless connection between wireless card and router using either Push Button Configuration (PBC) method or PIN method. First, the WPS sof tware should ...

  • Rosewill RNX-N360PC - page 37

    33 the button on my access point in the next screen shown in Figure 4 -4 and click Next . Figure 4-3 Figure 4-4 3. Then wait a minute until Figure 4-5 appears. Click Fin ish to complete the WPS configuration. ...

  • Rosewill RNX-N360PC - page 38

    34 Figure 4-5 4.2 PIN method There are two ways to configure the WPS by PIN method : 1) Enter a PIN into your AP device. 2) Enter the PIN from your AP device. Following are the detailed configuration procedure of each way . 4.2.1 Enter a PIN into your AP device 1. Double click the icon on the desktop to open the WPS Utility and then you can see the ...

  • Rosewill RNX-N360PC - page 39

    35 Figure 4-6 2. Open the Router’s Web-based Utility and click WPS link on the left of the ma in menu. Then Figure 4-7 will appear . Figure 4-7 3. Click Add device, then you can see Figure 4-8. Select Enter the ne w device’ s PIN and enter the PIN value of the adapter shown in Figure 4-6, click Connect . Figure 4-8 4. When Figure 4-5 appears , ...

  • Rosewill RNX-N360PC - page 40

    36 4.2.2 Enter the PIN from your AP device 1. Open the WPS Utility and you will see Figure 4-3. Click Next to continue. Then Figure 4-4 will appear . Select the third option and ent er the PIN value which is labeled on the bottom of the Router . Click Next . Figure 4-9 2. When Figure 4-5 appears , the WPS configuration is complete. ) Note: If you g ...

  • Rosewill RNX-N360PC - page 41

    37 Appendix A: S pecifications Normal Interface 32 bit PCI Interface S tandards IEEE802.1 1n; IE EE802.1 1g; IEEE802.1 1b; Operating System Windows 2000/Wi ndows XP/Windows Vista/Windows 7 Radio Data Rate Up to 300Mbps 13.5/27/40.5/54/81/ 108/121.5/135Mbps 13/26/39/52/78/104/1 17/130Mbps 6.5/13/19.5/26/ 39/52/58.5/65Mbps 1/2/5.5/1 1Mbps (Auto Rate ...

  • Rosewill RNX-N360PC - page 42

    38 Appendix B: Glossary ¾ 802.11b - The 802.11b standard specifies a wire less product networking at 11 Mbps using direct-sequence spread -spectrum (DSSS) technol ogy and operating in the unlicensed radio spectrum at 2.4GHz, and WEP encrypt ion for security. 802.11b networks are also referred to as Wi-Fi networks. ¾ 802.11g - specification for wi ...

  • Rosewill RNX-N360PC - page 43

    39 ¾ SSID - A S ervice S et Id entification is a thirty-two c haracter (maximum) alphanumeric key identifying a wireless local area network. For the wireless devices in a network to communicate with each other , all devices must be configured with the same SSID. This is typically the configuration p aramete r for a wireless PC card. It corresponds ...

  • Rosewill RNX-N360PC - page 44

    40 Appendix C: FAQ This chapter provides solutions to problems that may occur during the installation and operation of the Wireless Adapter . Read the de scriptions below to solve your problems. 1. I cannot communicate with the other computers linked via Ethernet in the Infrastructure configuration. 1. Make sure that the PC to which the Adapter is ...

  • Rosewill RNX-N360PC - page 45

    41 3. ‘SSID’ field in ‘Site Survey’ function), you have to input correct SSID of the access point you wish to connect. Please contac t the owner of access point to ask for correct SSID. 4. Y ou have to input correct passphrase / security key to connect an access point with encryption. Please cont act the owner of access point to ask for cor ...

Manufacturer Rosewill Category Computer Hardware

Documents that we receive from a manufacturer of a Rosewill RNX-N360PC can be divided into several groups. They are, among others:
- Rosewill technical drawings
- RNX-N360PC manuals
- Rosewill product data sheets
- information booklets
- or energy labels Rosewill RNX-N360PC
All of them are important, but the most important information from the point of view of use of the device are in the user manual Rosewill RNX-N360PC.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Rosewill RNX-N360PC, service manual, brief instructions and user manuals Rosewill RNX-N360PC. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Rosewill RNX-N360PC.

Similar manuals

A complete manual for the device Rosewill RNX-N360PC, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Rosewill RNX-N360PC by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Rosewill RNX-N360PC.

A complete Rosewill manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Rosewill RNX-N360PC - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Rosewill RNX-N360PC, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Rosewill RNX-N360PC, that we can find in the current document
3. Tips how to use the basic functions of the device Rosewill RNX-N360PC - which should help us in our first steps of using Rosewill RNX-N360PC
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Rosewill RNX-N360PC
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Rosewill RNX-N360PC in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Rosewill RNX-N360PC?

Use the form below

If you did not solve your problem by using a manual Rosewill RNX-N360PC, ask a question using the form below. If a user had a similar problem with Rosewill RNX-N360PC it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)