English dropdown-ico

Manual VeriFone 250

14 pages 1.8 mb
Download

Go to site of 14

Summary
  • VeriFone 250 - page 1

    Using the Verifone 250 Receipt Printer With MPI 2002 Revised: November 1, 2002 ...

  • VeriFone 250 - page 2

    Using the Verifone 250 Receipt Printer with MP I 2002 Page 2 of 2 Before You Begin MPI 2002 v. 1.0.8.x has built - in support for Verifone 250 receipt printers. Support for this printer was included to provide a cost - effectiv e solution for receipt printing. Supplies for the Verifone 250 are redily available through a number of vendors and both n ...

  • VeriFone 250 - page 3

    Using the Verifone 250 Receipt Printer with MP I 2002 Page 3 of 3 Connecting The Verifone 250 Rec eipt Printer With all of the parts listed in the previous section, we are now ready to connect the receipt printer to your computer. First, lets assemble the various receipt printer parts. (DO NOT INSTALL THE POWER PACK AT THIS TIME. ENSURE THAT THE PO ...

  • VeriFone 250 - page 4

    Using the Verifone 250 Receipt Printer with MP I 2002 Page 4 of 4 Installing The Ribbon Cartridge Remove the R ibbon Cover from the Printer Unit by simultaneously pressing - in and pulling - up on the grooved thumb button on the front panel of your printer. (Below the printer nameplate.) Check to determine if a printer Ribbon Cartridge is installed ...

  • VeriFone 250 - page 5

    Using the Verifone 250 Receipt Printer with MP I 2002 Page 5 of 5 Locate the Power Pack and plug the small round cable into the back of the Printer Unit. Refer to the diagram below to locate the correct port. Match the pins on the power cable with the pins holes on the back of the printer. The power cable will only fit in the correct port and only ...

  • VeriFone 250 - page 6

    Using the Verifone 250 Receipt Printer with MP I 2002 Page 6 of 6 Finally, toggle the Power Switch to determine if the installation was successful. The printer will make some noises and the Powe r Light will turn green or red. Installing Paper Roll Turn the power on before installing the Paper Roll. Remove the Roll Cover from the Printer Unit, if a ...

  • VeriFone 250 - page 7

    Using the Verifone 250 Receipt Printer with MP I 2002 Page 7 of 7 The special serial cable has two very different plugs. The small, round plug on one end connects to the Printer Unit. Refer to the diagram below for the location of the Serial Port on the Printer Unit and then plug the special serial cable into the correct port. Rotate the serial cab ...

  • VeriFone 250 - page 8

    Using the Verifone 250 Receipt Printer with MP I 2002 Page 8 of 8 Installing The Printer Driver (Windows 9x) We are now ready to install your Verifone 250 Receipt Printer on you r computer. Power - up the receipt printer and then power - up your computer. Once your computer has completed loading, proceed. From your START menu, select SETTINGS > ...

  • VeriFone 250 - page 9

    Using the Verifone 250 Receipt Printer with MP I 2002 Page 9 of 9 Choose “Local Printer”. This choice should already be selected. Click the NEXT button to proceed. Choose “Generic” from the “Manufacturers” list on the left, and choose “Generic / Text Only” from the “Printers” list on the left. Click the NEXT button to proceed. ...

  • VeriFone 250 - page 10

    Using the Verifone 250 Receipt Printer with MP I 2002 Page 10 of 10 Ensure the “Keep existing driver” choice is highlighted and click the NEXT button to proceed. If not already selected, choose LPT 1: as the Printer Port and click the NEXT button to proceed. ...

  • VeriFone 250 - page 11

    Using the Verifone 250 Receipt Printer with MP I 2002 Page 11 of 11 In the “Printer Name” box, del ete the default name and type “Verifone 250 Receipt Printer”. Choose NO for the remaining option and click the NEXT button to continue. Choose NO as we do not wish to print a test page. Click the FINISH button to complete this portion of the s ...

  • VeriFone 250 - page 12

    Using the Verifone 250 Receipt Printer with MP I 2002 Page 12 of 12 Now we need to tell Windows how to communicate with this printer. Right - click on the new printer in the Printers window. From the menu that appears, choo se PROPERTIES and you should see a dialog similar to the illustration to the right. Do not change any settings on this page. F ...

  • VeriFone 250 - page 13

    Using the Verifone 250 Receipt Printer with MP I 2002 Page 13 of 13 The “Bits per second” should be set to “9600”. Change “Data Bits” to “7” and “Parity” to “Even”. Finally, set “Stop Bits” to “1” and “Flow Control” to “Hardware”. You do not need to click the ADVANCED or RESTORE DEFAULTS buttons. Click the OK ...

  • VeriFone 250 - page 14

    Using the Verifone 250 Receipt Printer with MP I 2002 Page 14 of 14 Using The Verifone 250 Receipt Printer in MPI 2002 Congratulations, you are now ready to use the Verifone 250 Receipt Printer in MPI 2002. Start MPI 2002 and proceed to MAINTENANCE > DEFAUL T VALUES menu item. Choose the CHECK CASHING tab. In the “Chcek Cashing Receipt Printer ...

Manufacturer VeriFone Category Printer

Documents that we receive from a manufacturer of a VeriFone 250 can be divided into several groups. They are, among others:
- VeriFone technical drawings
- 250 manuals
- VeriFone product data sheets
- information booklets
- or energy labels VeriFone 250
All of them are important, but the most important information from the point of view of use of the device are in the user manual VeriFone 250.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals VeriFone 250, service manual, brief instructions and user manuals VeriFone 250. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product VeriFone 250.

Similar manuals

A complete manual for the device VeriFone 250, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use VeriFone 250 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of VeriFone 250.

A complete VeriFone manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual VeriFone 250 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the VeriFone 250, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the VeriFone 250, that we can find in the current document
3. Tips how to use the basic functions of the device VeriFone 250 - which should help us in our first steps of using VeriFone 250
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with VeriFone 250
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of VeriFone 250 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning VeriFone 250?

Use the form below

If you did not solve your problem by using a manual VeriFone 250, ask a question using the form below. If a user had a similar problem with VeriFone 250 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)