English dropdown-ico

Manual Hitachi CP-RS56

53 pages 6.45 mb
Download

Go to site of 53

Summary
  • Hitachi CP-RS56 - page 1

    1 Projector CP-RS56 / CP-RX61/CP-RS57 User's Manual – Oper ating Guide Thank you for purchasing this projector . WARNING ► Before using, read the "User's Manual - Safety Guide" and these manuals to ensure correct usage through understanding. After reading, store them in a safe place for future reference. About this manual V ...

  • Hitachi CP-RS56 - page 2

    2 About this manual . . . . . . . . . . 1 Contents . . . . . . . . . . . . . . . . . 2 Projector features . . . . . . . . . . 3 About contents of package . . 3 Par t names . . . . . . . . . . . . . . . 4 P r o j e c t o r ...................... 4 C o n t r o l s ....................... 5 Remote control . . . . . . . . . . . . . . . . .5 Prepar atio ...

  • Hitachi CP-RS56 - page 3

    3 Projector features / About contents of package Projector features This projector is used to project various computer signals as well as NTSC / P AL / SECAM video signals onto a screen. It requires just a little space for installation and gets a large image from short distance.  High Brightness Newly developed 165W UHB (Ultra High Brightness) l ...

  • Hitachi CP-RS56 - page 4

    4 S-VIDEO VIDEO AUDIO IN OUT RGB IN2 RGB OUT RGB IN1 CONTROL Par t names Lens (  17, 46 ) Lens cover (  6, 17 ) Filter cover (  9, 10, 44 ) (Air lter and intake vent are inside.) Elevator button (  12 ) Elevator foot (  12 ) Remote sensor (  8 ) Focus ring (  20 ) V ent (  10 ) AC inlet (  16 ) Power switch (  17, 1 ...

  • Hitachi CP-RS56 - page 5

    5 Par t names LAMP indicator (  48 ) TEMP indicator (  48 ) POWER indicator (  17, 18, 48 ) INPUT button (  19 ) Cursor buttons ▲,▼,◄,► (  19~41 ) ST ANDBY/ON button (  17, 18 ) Controls R emote control SEARCH button (  20 ) RGB button (  19 ) VIDEO button (  19 ) ASPECT button (  20 ) MAGNIFY ON button (  2 ...

  • Hitachi CP-RS56 - page 6

    6 Preparations F astening the lens co ver WARNING ► Do not fasten the lens cover during use or immediately after use. Handling while the projector is in a high temperature could cause a burn and/or malfunction to the projector . Before operating, make sure that the power switch is off, that the power cord is not plugged in, and that the projector ...

  • Hitachi CP-RS56 - page 7

    7 Prepar ations Putting batteries WARNING ► Always handle the batteries with care and use them only as directed. Improper use may result in battery explosion, cracking or leakage, which could result in re, injury and/or pollution of the surrounding environment. • Be sure to use only the batteries specied. Do not use batteries of different ...

  • Hitachi CP-RS56 - page 8

    8 Prepar ations Using the remote contr ol CA UTION ► Be careful in handling the remote control. Incorrect handling could cause damage or malfunction. • Do not drop or otherwise expose the remote control to physical impact. • Do not get the remote control wet or place it on wet objects. • Rem ov e the ba tt er ies f ro m t he re mo te con tr ...

  • Hitachi CP-RS56 - page 9

    9 Prepar ations About the lter co ver f or bottom-up use WARNING ►Do not replace the lter cover and/or air lter during use or immediately after use. Handling while the projector is in a high temperature could cause a burn and/or malfunction to the projector . Before operating, make sure that the power switch is off, that the power cord i ...

  • Hitachi CP-RS56 - page 10

    10 Setting up Setting up WARNING ► Place the projector in a stable position horizontally . A fall or a turnover could cause an injury and/or damage to the projector . Then using damaged projector could result in a re and/or an electric shock. • Don’t place the projector on an unstable, slant or vibrant surface such as a wobbly or inclined ...

  • Hitachi CP-RS56 - page 11

    1 1 Setting up (c) up (c) down (b) 4:3 (a) 16:9 (a) Ar rangement Refer to the illustrations and tables below to determine the screen size and projection distance. The values shown in the table are calculated (±3%) for a full size screen of 800x600 for the model CP-RS56 / CP-RS57, or 1024x768 for the model CP-RX61. (a) Screen size [inch (m)] 4 : 3 ...

  • Hitachi CP-RS56 - page 12

    12 Adjusting the projector's eleva tor WARNING ► Do not adjust the projector ’s elevator during use or immediately after use. Handling while the projector is in a high temperature could cause a burn and/or malfunction to the projector . Before operating, make sure that the power switch is off, that the power cord is not plugged in, and tha ...

  • Hitachi CP-RS56 - page 13

    13 Setting up Connecting your de vices CA UTION ►Turn of f all devices prior to connecting them to the projector . Attempting to connect a live device to the projector may generate extremely loud noises o r other abnorm alities that m ay result in m alfunction and /or damage to the device and/or projector. ►Use the accessory cable or a designat ...

  • Hitachi CP-RS56 - page 14

    14 S-VIDEO VIDEO AUDIO IN OUT RGB IN2 RGB OUT RGB IN1 CONTROL Setting up Audio out RS-232C RGB out Examples of connection with a computer RGB cable RS-232C cable S-VIDEO VIDEO AUDIO IN OUT RGB IN2 RGB OUT RGB IN1 CONTROL RGB IN2 R GB OU T S-VIDEO VIDEO AUDIO IN OUT RGB IN2 RGB OUT RGB IN1 CONTROL S-VIDEO VIDEO AUDIO IN OUT RGB IN2 RGB OUT RGB IN1 C ...

  • Hitachi CP-RS56 - page 15

    15 S-VIDEO VIDEO AUDIO IN OUT RGB IN2 RGB OUT RGB IN1 CONTROL S-VIDEO VIDEO AUDIO IN OUT RGB IN2 RGB OUT RGB IN1 CONTROL S-VIDEO VIDEO AUDIO IN OUT RGB IN2 RGB OUT RGB IN1 CONTROL S-Video out Examples of connection with a VCR/DVD player Video out Audio out Audio out Component video cable Audio out Video cable S-Video cable Component video out Setti ...

  • Hitachi CP-RS56 - page 16

    16 Connecting pow er suppl y WARNING ► Please use extra caution when connecting the power cord as incorrect or faulty connections may result in re and/or electrical shock. • Only use the power cord that came with the projector . If it is damaged, contact your dealer to newly get correct one. • Only plug the power cord into an outlet rated ...

  • Hitachi CP-RS56 - page 17

    17 Po wer on/of f Power on/off T ur ning on the pow er WARNING ► When the power is on, a strong light is emitted. Do not look into the lens or vents of the projector . NO TE • T ur n the p ow er on in r igh t or der . P lea se p owe r on th e p ro je cto r b ef or e th e c on ne cte d d ev ic es. ST ANDBY/ON button 1. Make sure that the power c ...

  • Hitachi CP-RS56 - page 18

    18 T ur ning of f the power NO TE • T ur n t he p owe r o f f in rig ht o rde r . Pl ea se pow er o ff th e pr oje cto r af ter th e co nne ct ed de vic es . • Ex cep t fo r a n e me rg enc y , whe nev er yo u tur n t he p roj ect or o ff , o be y the pr oc ed ure of th e fo llo win g “T ur ni ng o ff th e p ow er ”, an d do not d is con ne ...

  • Hitachi CP-RS56 - page 19

    19 Operating Operating Adjusting the v olume 1. Press the VOLUME button on the remote control. A dialog will appear on the screen to aid you in adjusting the volume. 2. Use the cursor buttons ▲/▼ to adjust the volume. T o close the dialog and complete the operation, press the VOLUME button again. Even if you don’t do anything, the dialog will ...

  • Hitachi CP-RS56 - page 20

    20 Operating Adjusting the zoom (Digital) 1. Press the ZOOM +/- button on the remote control. A dialog will appear on the screen to aid you in adjusting the zoom. 2. Use the ZOOM buttons +/- to adjust the zoom. T o close the dialog and complete this operation, don’t perform operation for a few seconds. Searching an input signal 1. Press the SEARC ...

  • Hitachi CP-RS56 - page 21

    21 Operating Cor recting the k eystone distor tions 1. Press the KEYSTONE button on the remote control. A dialog will appear on the screen to aid you in correcting the distortion. 2. Use the cursor buttons ▲/▼ to correct the distortion. T o close the dialog and complete this operation, press the KEYSTONE button again. Even if you don’t do any ...

  • Hitachi CP-RS56 - page 22

    22 Operating F r eezing the scr een 1. Press the FREEZE button on the remote control. The “FREEZE” indication will appear on the screen, and the projector will enter the FREEZE mode. T o exit the FREEZE mode and restore the screen to normal, press the FREEZE button again. ● The projector automatically exits the FREEZE mode when the input sign ...

  • Hitachi CP-RS56 - page 23

    23 1. T o display a menu Press the MENU button on the remote control or one of the cursor buttons ▲/▼/◄/► on the projector . The Advance MENU or EASY MENU will appear . 2. T o choose the target menu Point at one of choices on the menu using the cursor buttons ▲/▼, then press the cursor button ► or the ENTER button. At the Advance menu ...

  • Hitachi CP-RS56 - page 24

    24 (2) PICTURE of Advance MENU → one of Advance Menus (ex. SETUP menu) (3) Advance Menu → EASY MENU 3. T o choose the target item Point at one of choices on the menu using the cursor buttons ▲/▼. At an Advance menu, then press the cursor button ► or the ENTER button. (1) At EASY MENU (ex. KEYST ONE) (2) At Advance Menu (ex. KEYSTONE) Mult ...

  • Hitachi CP-RS56 - page 25

    25 4. T o operate Please follow of the mention concerned in each. In general, (1) At EASY MENU, use the cursor buttons ◄/► to operate. (2) At Advance MENU, use the cursor buttons ▲/▼. 5. T o return to the previous menu Press the cursor button ◄ or the ESC button. (1) One of Advance Menus (ex. SETUP menu) → Main of Advance MENU (2) Dialo ...

  • Hitachi CP-RS56 - page 26

    26 Multifunctional settings EASY MENU Item Description ASPECT Using the buttons ◄/► switches the mode for aspect ratio. See the item ASPECT of section IMAGE menu. (  31, 20 ) ZOOM Using the buttons ◄/► adjusts the zoom. See the item ZOOM of section SETUP menu. (  35, 20 ) KEYSTONE Using the buttons ◄/► corrects the keystone distor ...

  • Hitachi CP-RS56 - page 27

    27 Multifunctional settings Item Description SHARPNESS Using the buttons ◄/► adjusts the sharpness. See the item SHARPNESS of section PICTURE menu . (  29 ) WHISPER Using the buttons ◄/► turns off/on the whisper mode. See the item WHISPER of section SETUP menu. (  35 ) MIRROR Using the buttons ◄/► switches the mode for mirror stat ...

  • Hitachi CP-RS56 - page 28

    28 Multifunctional settings PICTURE menu Item Description BRIGHT Using the buttons ▲/▼ adjusts the brightness. : Light ó Dark CONTRAST Using the buttons ▲/▼ adjusts the contrast. : Strong ó Weak GAMMA Using the buttons ▲/▼ switches the GAMMA mode. #1 DEF AUL T ó #1 CUST OM ó #2 DEF AUL T #3 CUSTOM ó #3 DEF AUL T ó #2 CUSTOM T o ad ...

  • Hitachi CP-RS56 - page 29

    29 Multifunctional settings Item Description COLOR TEMP Using the buttons ▲/▼ switches the mode of color temperature. HIGH ó MIDDLE CUSTOM ó LOW T o adjust CUSTOM Selecting the CUSTOM and then pressing the button ► or the ENTER button displays a dialog to aid you in adjusting the OFFSET and/or GAIN of CUSTOM mode. OFFSET adjustments change ...

  • Hitachi CP-RS56 - page 30

    30 Multifunctional settings Item Description PROGRESSIVE Using the buttons ▲/▼ switches the progressive mode. TV ó FILM ó TURN OFF • This function performs only at an interlaced signal of a VIDEO input, a S-VIDEO input or a component video input of 525i (480i) or 625i (576i) signal. • When the TV or FILM is selected, the screen image will ...

  • Hitachi CP-RS56 - page 31

    31 Multifunctional settings IMAGE menu Item Description ASPECT Using the buttons ▲/▼ switches the mode for aspect ratio. At a RGB signal 4:3 ó 16:9 ó NORMAL At a video signal / no signal 4:3 ó 16:9 • The NORMAL mode keeps the original aspect ratio of the signal. • At a HDTV compo nent video sign al of 1 125i (1 080i) or 7 50p ( 720p) , t ...

  • Hitachi CP-RS56 - page 32

    32 Multifunctional settings Item Description H SIZE Using the buttons ▲/▼ adjusts the horizontal size. Large ó Small • This item can be chosen only at a RGB signal. • When this adjustment is excessive, the picture may not be displayed correctly . In such a case, please reset the adjustment pressing the RESET button during this operation. A ...

  • Hitachi CP-RS56 - page 33

    33 Multifunctional settings INPUT menu Item Description COLOR SP ACE Using the buttons ▲/▼ switches the mode for color space. AUTO ó RGB ó SMPTE240 ó REC709 ó REC601 • This item can be chosen only at a RGB signal or a component video signal. • The AUTO mode automatically selects the optimum mode. • The AUTO operation may not work well ...

  • Hitachi CP-RS56 - page 34

    34 Multifunctional settings INPUT menu (continued) Item Description FRAME LOCK Using the buttons ▲/▼ turns the frame lock function on/off. TURN ON ó TURN OFF • This item performs only at a RGB signal with vertical frequency of 50 to 72 Hz. • When the TURN ON is selected, a moving picture is displayed more smoothly . • This function may c ...

  • Hitachi CP-RS56 - page 35

    35 Multifunctional settings SETUP menu Item Description ZOOM Using the buttons ▲/▼ adjusts the zoom (magnifying power). Large ó Small KEYSTONE Using the buttons ▲/▼ corrects the keystone distortion. Upper in the data ó Lower in the data • The adjustable range of this function will vary with the type of input signal. At some signals, thi ...

  • Hitachi CP-RS56 - page 36

    36 Multifunctional settings SCREEN menu Item Description LANGUAGE Using the buttons ▲/▼ switches the OSD (On Screen Display) language. SUOMI ó POLSKI ó TÜRKÇE ENGLISH ó FRANÇAIS ó DEUTSCH ó ESP AÑOL ó IT ALIANO NORSK ó NEDERLANDS ó PORTUGUÊS ó ó 　　　　 ó ó SVENSKA ó MENU POSITION Using the buttons ◄/►/▲/▼ adjusts ...

  • Hitachi CP-RS56 - page 37

    37 Multifunctional settings Item Description ST ART UP Using the buttons ▲/▼ switches the mode for the start up screen. The start up screen is the screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF MyScreen is the screen you can register a desired screen. ORIGINAL screen is the existing standar ...

  • Hitachi CP-RS56 - page 38

    38 Multifunctional settings Item Description MyScreen Lock Using the buttons ▲/▼ turns on/off the MyScreen lock function. TURN ON ó TURN OFF When the TURN ON is selected, the item MyScreen cannot be performed. Use this function for protecting the current MyScreen. MESSAGE Using the buttons ▲/▼ turns on/off the message function. TURN ON ó ...

  • Hitachi CP-RS56 - page 39

    39 Multifunctional settings OPTION menu Item Description AUTO SEARCH Using the buttons ▲/▼ turns on/off the automatic signal search function. TURN ON ó TURN OFF When the TURN ON is selected, detecting no signal automatically cycles through input ports in order of following. Then when an input is found, the projector will stop searching and dis ...

  • Hitachi CP-RS56 - page 40

    40 Multifunctional settings Item Description LAMP TIME The lamp time is the time counted after the last resetting. It is shown in the OPTION menu as the usage time of the lamp. Pressing the RESET button on the remote control or the button ► of the projector displays a dialog. T o reset the lamp time, select the RESET using the button ▲. RESET ? ...

  • Hitachi CP-RS56 - page 41

    41 Multifunctional settings Item Description SERVICE Selecting this item displays the SERVICE menu. Select an item using the buttons ▲/▼, and press the button ► or the ENTER button on the remote control to execute the item. F AN SPEED ó AUTO ADJUST ó GH OST ó F IL TER MESSAGE ó F ACTOR Y RESET F AN SPEED Using the buttons ▲/▼ switches ...

  • Hitachi CP-RS56 - page 42

    42 Maintenance Maintenance Lamp WARNING HIGH VOL T AGE HIGH TEMPERA TURE HIGH PRESSURE ► The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you ...

  • Hitachi CP-RS56 - page 43

    43 Lamp (continued) A lamp has a nite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor . Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. T o prepare a new lamp, ...

  • Hitachi CP-RS56 - page 44

    44 If the air lter becomes clogged by dust or the like, internal temperatures rise and could cause a re, a burn and/or malfunction to the projector . When the indicators or a message prompts you to clean the air lter , clean the air lter as soon as possible. Please check and clean the air lter periodically , even if there is no messa ...

  • Hitachi CP-RS56 - page 45

    45 Maintenance Air lter (continued) 5. Apply a vacuum cleaner to the air lter and lter cover . Then set a new or cleaned air lter into place. In case of the lter cover for bottom-up use, remove the air lter from the lter cover and clean each. After cleaning, reattach the cleaned lter to the lter cover . Please replace the ...

  • Hitachi CP-RS56 - page 46

    46 Maintenance WARNING ► Do not take care of the projector during use or immediately after use. Handling while the projector is in a high temperature could cause a burn and/ or malfunction to the projector . Before operating, make sure that the power switch is off, that the power cord is not plugged in, and that the projector is cool adequately . ...

  • Hitachi CP-RS56 - page 47

    47 T r oubleshooting T roubleshooting R elated messages When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below . If the same message is displayed after the treatment, or if a message other than the following appears, please contact yo ...

  • Hitachi CP-RS56 - page 48

    48 T r oubleshooting R e gar ding the indicator lamps Lighting and ashing of the POWER indicator , the LAMP indicator , and the TEMP indicator have the meanings as described in the table below . Please respond in accordance with the instructions within the table. If the same indication is displayed after the treatment, or if an indication other ...

  • Hitachi CP-RS56 - page 49

    49 T r oubleshooting Regarding the indicator lamps (continued) POWER indicator LAMP indicator TEMP indicator Description Blinking In Red or Lighting In Red T urned off Blinking In Red The cooling fan is not operating. Please turn the power off, and allow the unit to cool down at least 20 minutes. After the projector has sufciently cooled down, p ...

  • Hitachi CP-RS56 - page 50

    50 T r oubleshooting Phenomena that may easily be mistak en for machine def ects WARNING ► Never use the projector if abnormal operations such as smoke, strange odor , excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter , etc. should occur . In such cases, immediately turn off the power switch and then ...

  • Hitachi CP-RS56 - page 51

    51 Phenomena that may easily be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect Reference page  No pictures are displayed. The lens cover is closed. Remove the lens cover . 4, 17 The signal cables are not correctly connected. Correctly connect the connection cables. 13, 14 The brightness is adjusted to an ...

  • Hitachi CP-RS56 - page 52

    52 Specications NO TE • This specications are subject to change without notice. Warr anty and after-ser vice / Specications W arranty and after-service If a problem occurs with the equipment, rst refer to the “T roubleshooting” (  47 ) and run th rou gh t he sug ges ted ch eck s. If t his do es not re sol ve the proble m, ple a ...

  • Hitachi CP-RS56 - page 53

    53 Specications Specications (continued) [unit: mm] 202 285 69 33.5 73 83 ...

Manufacturer Hitachi Category Projector

Documents that we receive from a manufacturer of a Hitachi CP-RS56 can be divided into several groups. They are, among others:
- Hitachi technical drawings
- CP-RS56 manuals
- Hitachi product data sheets
- information booklets
- or energy labels Hitachi CP-RS56
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hitachi CP-RS56.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hitachi CP-RS56, service manual, brief instructions and user manuals Hitachi CP-RS56. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hitachi CP-RS56.

Similar manuals

A complete manual for the device Hitachi CP-RS56, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hitachi CP-RS56 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hitachi CP-RS56.

A complete Hitachi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hitachi CP-RS56 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hitachi CP-RS56, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hitachi CP-RS56, that we can find in the current document
3. Tips how to use the basic functions of the device Hitachi CP-RS56 - which should help us in our first steps of using Hitachi CP-RS56
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hitachi CP-RS56
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hitachi CP-RS56 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hitachi CP-RS56?

Use the form below

If you did not solve your problem by using a manual Hitachi CP-RS56, ask a question using the form below. If a user had a similar problem with Hitachi CP-RS56 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)