-
Soehnle 3010 - page 1
www .soehnle-pro fessional.com F OR MEASUREABLE SUCCESS Basic T erminal 3010 Operating Manual Ba_3010_GB.qxd 03.04.2008 17:06 Seite 1 ...
-
Soehnle 3010 - page 2
English 2 2 Content s 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..Page 3 1.1 Operating manual notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 3 1.2 Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . ...
-
Soehnle 3010 - page 3
English 3 3 Thank you for choosing this Soehnle Professional product. All the features of this product were designed to the state of the art and are optimised for simple and straightforward use. If you have any queries or experience any problems with the appliance that are not addressed in the operating instructions, please contact your Soehnle Pro ...
-
Soehnle 3010 - page 4
English 4 4 Scale 1 + 2 Ground (GND) Pressure compensation membrane on IP 65 housing Connections e.g. Profibus, Ethernet, etc. Interface 2 Interface 1 Power supply 1.3 Putting into operation Before connecting the power plug to the mains, make sure that the power supply specified on the nameplate and the power plug version comply with local conditio ...
-
Soehnle 3010 - page 5
English 5 5 Weighing ranges Max Maximum load of weighing range Min Minimum load of weighing range e= Calibration value (resolution) SNR Serial number of scale (scale type, last digits of year of manufacture, consecutive number) EU conformity mark with year of affixing also st art of validity of verification Precision class D07-09-01 1 Number of EU ...
-
Soehnle 3010 - page 6
English 6 6 1.7 Control keys Operating mode Setpoint input Setting mode On / Off Zeroing key or Clear tare Set input to zero One menu level back, or shift an editable decade from right to left T are key Increment value Next setting step or increment value Print key or Enter key Next setting step or increment value Access edit function within settin ...
-
Soehnle 3010 - page 7
English 7 7 1.8 Electronic nameplate Press the Info key twice to display the electronic nameplate. Press the arrow keys ( / ) to indicate the electronic nameplate, the Serial No. and the calibration counter of the activated measuring points in the display . Press the CL key to cancel or end display of the electronic nameplate. With a 1 or 2-range s ...
-
Soehnle 3010 - page 8
English 8 8 2. Basic functions The basic functions are similar or identical for all application programs. 2.1 Power-on Only when the scale is not loaded. After the test routine, the display is set to zero. The scale is ready for use. Place the weighing product on the scale. The display shows the gross weight. 2.2 Switching off This is immediately p ...
-
Soehnle 3010 - page 9
English 9 9 2.5 T aring function Manual tare Place an empty container on the platform and press the -key . Manual tare input In Setting mode (see separate description 470.702.078 User Mode), select "Manual tare input" to assign the key . Then in operation, press the -key to set the value using the arrow keys (/) . The set value is accepte ...
-
Soehnle 3010 - page 10
English 1 1 0 0 2.6 T en times resolution X10 The ten times resolution appears by pressing the -key and the Zeroing key simultaneously . On approved scales, the high resolution appears for 5 seconds or flashes as long as you hold down the keys - on non-approved scales, the high resolution appears as long as you press the -key and the Zeroing key . ...
-
Soehnle 3010 - page 11
English 1 1 1 1 The selected data record is displayed in scroll mode as follows: Scroll by pressing the arrow keys ( / ) up or down. Quite the View mode by pressing the -key . Press the -key and then hold down the - and - keys for 5 seconds to switch back to Weighing mode. 2.9 Hold function The hold function is activated in Setting mode (see separa ...
-
Soehnle 3010 - page 12
English 1 1 2 2 2.10 Inputs and output s The optional I/O module has 4 inputs and outputs that can be individually configured in Setting mode (see (separate description 470.702.078 User Mode). 2.11 LED lamp s The appliance has integrated LED lamps. The functionality can be set and activated individually for each application program in Setting mode ...
-
Soehnle 3010 - page 13
3.0 Application programs The various application programs on the Soehnle Basic T erminal 3010 of fer you a wide range of solutions for weighing operations. Y ou can modify the application programs to your specific requirements in Setting mode (see separate description 470.702.078 User Mode). Below is a list of application programs available to you: ...
-
Soehnle 3010 - page 14
English 1 1 4 4 Displaying the piece weight Press the Info key and then the counting key to display the piece weight. Press the CL key to go back. 3.3 T otalising Place weighing product on the platform in W eighing mode and accept the weight value in the total memory by pressing the + key . Remove the weighing product from the platform or - depende ...
-
Soehnle 3010 - page 15
English 1 1 5 5 3.4 Batching Place weighing product on the platform in W eighing mode and accept the weight value in the batch memory by pressing the + key . Place the next weighing product on the platform and press the + key to accept the weight value in the batch memory , etc. A full batch memory is recognised by the tot alising character ( Σ ) ...
-
Soehnle 3010 - page 16
English 1 1 6 6 3.6 Switching point programming Four switching points can be set in the Basic T erminal 3010. The switching points are used for switching and dosing. Setting the switching points Press the switching point key . The first switching point is displayed. This is indicated by the arrow in the display . Set the value using the arrow keys ...
-
Soehnle 3010 - page 17
English 1 1 7 7 Select the dosing function in Setting mode (see separate description 470.702.078 User Mode and 470.051.109 Dosing). Use the switching points (see 3.6) to set coarse flow , fine flow and correction value. Setting the switching points S1 Setpoint for coarse dosing S2 Setpoint for fine dosing S3 Correction value for coarse dosing S4 Co ...
-
Soehnle 3010 - page 18
English 1 1 8 8 4 T roubleshooting Display Remedy Please check that you operated the appliance correctly . If not, interrupt the command chain by pressing the CL key . The scale sets the value zero auto- matically when it is switched on. If the scale is outside the set tolerance band, the display indicates --0--. Clip off the plat form. Possibly re ...
-
Soehnle 3010 - page 19
English 1 1 9 9 Ba_3010_GB.qxd 03.04.2008 17:08 Seite 19 ...
-
Soehnle 3010 - page 20
www .soehnle-pro fessional.com F OR M EASURABLE SUCCESS Soehn le Pro f e ssional Gm bH & Co. K G Wilhelm-Soehnle-Str aße 2 71540 Murrhar dt Phon e +4 9 (0) 71 9 2 / 9 3 19 -22 0 Fa x +4 9 (0) 71 9 2 / 9 3 19 -2 11 E-Mail inf o@soehnle-pr of e ssional.de S S c c a a l l e e s s , , S S y y s s t t e e m m S S o o l l u u t t i i o o n n s s a a ...
Do you have a question concerning Soehnle 3010?
Use the form below
If you did not solve your problem by using a manual Soehnle 3010, ask a question using the form below. If a user had a similar problem with Soehnle 3010 it is likely that he will want to share the way to solve it.