English dropdown-ico

Manual Wright Manufacturing 26077

20 pages 0.25 mb
Download

Go to site of 20

Summary
  • Wright Manufacturing 26077 - page 1

    SPORT Commercial Mower Owner’s Manual For Sentar Sport serial #26077 and higher until superseded WARNING: READ THIS MANUAL BEFORE USING For your safety and for proper operation and maintenance read carefully and keep readily ava ilable for future reference. Revised 03/2006 Additional replacement owner’ s manuals as well as illustrated part s li ...

  • Wright Manufacturing 26077 - page 2

    Foreword Welcome to the progressive group of mowing professionals who use Wright mowers. We are focused on giving you advanced engineering and quality construction in each mower we build. This manual explains the features and promotes safer use of the mower. Please read it in its entirety and follow the instructions carefully so that you can have m ...

  • Wright Manufacturing 26077 - page 3

    TABLE OF CONTENTS PRE-DELIVERY SERVICE OF MOWER BY DEALER ............................................................. 1 SAFETY INSTRUCTIONS ......................................................................................................... 3 I NTRODUCTION ...................................................................................... ...

  • Wright Manufacturing 26077 - page 4

    * * This Page Intentionally Left Blank * * ...

  • Wright Manufacturing 26077 - page 5

    1 Pre-Delivery Service of Mower by Dealer If you are not completely famili ar with the Safety Instruction Manual read it now before pr oceeding with the Pre-Delivery Service of the mower. Only your authorized Wright dealer should perform the Pre-Delivery Service of the mower. WARNING The Wright Sentar Sport is shipped completely assembled and has b ...

  • Wright Manufacturing 26077 - page 6

    2 standing on the foot platform, release the parking brake. Now gradually close the manual bypass valves on top of each pump one at a time and see if the wheels start to move. If the wheels move when the hand controls are in neutral position, adjust the pump neutral adjustment allen screw. The manual bypass valves on side of each pump s hould now b ...

  • Wright Manufacturing 26077 - page 7

    3 SAFETY INSTRUCTIONS WRIGHT MOWER USERS & OWNERS: RE AD THIS MANUAL BEFORE USING PLEASE BE CAREFUL! WARNING This symbol with the word “WARNING” indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION This symbol with the word “CAUTION” indicates a potentially hazardous situati ...

  • Wright Manufacturing 26077 - page 8

    4 WARNING WARNING User Clothing DO NOT operate the mower while wearing sandals, tennis shoes, sneakers, or shorts. Always wear long non-baggy pants. Wear high- top leather steel-toed work boots with thick, textured tread, soft-rubber soled at all times. Hard or smooth soled shoes are too slippery for a good footing on mower platform. NEVER wear loo ...

  • Wright Manufacturing 26077 - page 9

    5 stop the mower. This could throw you off the mower or into and possibly over the handle bars causing serious injury or death. The faster you are moving the more potential there is for injury. Mow only in daylight or in good artificial light. Keep away from drop-offs, the edges of ponds, streams, pools, etc. especially at the bottom of slopes. Do ...

  • Wright Manufacturing 26077 - page 10

    6 mower operates. Do not operate the mower faster than conditions allow. For example, hills, wet or bumpy ground, dim light or high grass are all conditions requiring slower speeds. Never operate the mower at the highest speed unless you are on level, wide, open areas of clearly visible ground or transporting on paved areas. Speeding with any mower ...

  • Wright Manufacturing 26077 - page 11

    7 When crossing a slope sideways , your mower has the average amount of weight on the drive wheels versus the front wheels, similar to level ground. However, this angle leaves the least weight on the higher side drive wheel, tending to make it slip. This is the preferred angle for mowing large areas of gentle slopes. Recommendations for this angle: ...

  • Wright Manufacturing 26077 - page 12

    8 OPERATING INSTRUCTIONS If you are not completely famili ar with the Safety Instruction Manual read it now before pr oceeding with the operation of the mower. REMEMBER THERE ARE CERTAIN PRECAUTIONS LISTED IN THIS MANUAL THAT YOU MUST NOW TAKE BEFORE STARTING THE MOWER. WARNING Inspect Mower Before Each Use Inspection of Mower : Do not use the mowe ...

  • Wright Manufacturing 26077 - page 13

    9 about half of the way from idle speed. Release the parking brake. The higher engine speed will make the controls much more responsive and the mower much quicker; Use caution if it is your first time. Now try moving the hand control levers, one at a time, very slightly, forward and backward. Gradually increase your speed until you are well acquain ...

  • Wright Manufacturing 26077 - page 14

    10 Changing the Speed/Sensitivity Adjustment The controls are initially set with the Speed/ Sensitivity Adjustment in the faster, more sensitive position. If an operator is not completely familiar with the mower operation the operator may desire to decrease the ground speed. The slower setting has a corresponding decrease in the sensitivity of the ...

  • Wright Manufacturing 26077 - page 15

    11 ¼” allen wrench at the Return-to-Neutral (RTN) mechanism, if necessary. It is normal to make these adjustments from time to time. How to Test/Use the Blade Clutch/Brake Switch Before testing the blade clutch/brake operation, make sure the area is clear and there is nothing vulnerable to thrown objects from under the mower. No one should be ne ...

  • Wright Manufacturing 26077 - page 16

    12 oil fill tube. Use fully synthetic oil: Mobil1 15W- 50. Lift the mower so that the rear wheels are off the ground. Be careful to support the mower so that it will not fall or tip while the system is bled of air. With the bypass valves open and the engine running, slowly move the control levers back and forth five or six times. Now close the bypa ...

  • Wright Manufacturing 26077 - page 17

    13 Maintenance Interval Chart MAI NTE NANCE I T EM E N G I N E I T E M S S E E N O T E BE L O W F I R S T 8 H O U R S D A I L Y E V E R Y 2 5 H O U R S E V E R Y 1 0 0 H O U R S E V E R Y 2 0 0 H O U R S E V E R Y 3 0 0 H O U R S A N NU A L L Y I nspect f or cr acks i n f r am e, cut t er deck or ot her st eel part s *3 XX I nspect al l bel t s f o ...

  • Wright Manufacturing 26077 - page 18

    14 14 Date Maintenance/ Service Performed Unit Hours Shop/Technician Maintenance Record ...

  • Wright Manufacturing 26077 - page 19

    15 Wright Manufactur ing, Inc. ( herein after: WMI) warra nts to t he origin al owner th at the new WMI mower accompanying this document will be free from manufacturing d efects in mat erials or workmanship subject to the following limitations and exclusions. Any part of the WMI commerc ial mower manufactured by WMI and found , in the reasonabl e j ...

  • Wright Manufacturing 26077 - page 20

    4600X Wedgewood Blvd Frederick, MD 21703 www.wrightmfg.com ...

Manufacturer Wright Manufacturing Category Lawn Mower

Documents that we receive from a manufacturer of a Wright Manufacturing 26077 can be divided into several groups. They are, among others:
- Wright Manufacturing technical drawings
- 26077 manuals
- Wright Manufacturing product data sheets
- information booklets
- or energy labels Wright Manufacturing 26077
All of them are important, but the most important information from the point of view of use of the device are in the user manual Wright Manufacturing 26077.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Wright Manufacturing 26077, service manual, brief instructions and user manuals Wright Manufacturing 26077. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Wright Manufacturing 26077.

Similar manuals

A complete manual for the device Wright Manufacturing 26077, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Wright Manufacturing 26077 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Wright Manufacturing 26077.

A complete Wright Manufacturing manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Wright Manufacturing 26077 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Wright Manufacturing 26077, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Wright Manufacturing 26077, that we can find in the current document
3. Tips how to use the basic functions of the device Wright Manufacturing 26077 - which should help us in our first steps of using Wright Manufacturing 26077
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Wright Manufacturing 26077
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Wright Manufacturing 26077 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Wright Manufacturing 26077?

Use the form below

If you did not solve your problem by using a manual Wright Manufacturing 26077, ask a question using the form below. If a user had a similar problem with Wright Manufacturing 26077 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)