English dropdown-ico

Manual BOXLIGHT CP-11t

38 pages 0.53 mb
Download

Go to site of 38

Summary
  • BOXLIGHT CP-11t - page 1

    USER’S GUIDE BO XLIGHT CP-11t ...

  • BOXLIGHT CP-11t - page 2

    2 INFORMA TION T O THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and c ...

  • BOXLIGHT CP-11t - page 3

    3 IMPOR T ANT SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Do not use attachments no ...

  • BOXLIGHT CP-11t - page 4

    4 T ABLE OF CONTENTS FEA TURES AND DESIGN 5 BEFORE OPERA TION 14 COMPUTER MODE 22 VIDEO MODE 29 SETTING 31 APPENDIX 32 PREP ARA TION 6 NAME OF EACH PART OF THE PROJECTOR 6 SETTING-UP THE PROJECTOR 7 POSITIONING THE PROJECTOR 7 ADJUSTABLE FEET 7 CONNECTING THE AC POWER CORD 8 VENTILATION 8 MOVING THE PROJECTOR 9 CONNECTING THE PR OJECT OR 10 TERMINA ...

  • BOXLIGHT CP-11t - page 5

    5 FEA TURES AND DESIGN This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Compatibility This projector is compatible with many different ty ...

  • BOXLIGHT CP-11t - page 6

    6 PREP ARA TION NAME OF EA CH P AR T OF THE PR OJECT OR These Air Intake Vents should not be blocked. BO TT OM OF THE CABINET B A CK OF THE CABINET CARRY HANDLE HOT AIR EXHAUSTED ! Air blown from the exhaust vent is hot. When using or installing the projector, following attention should be taken. ● Do not put a flammable object near this vent. ? ...

  • BOXLIGHT CP-11t - page 7

    7 PREP ARA TION POSITIONING THE PR OJECT OR ● This projector is designed to project on a flat projection surface. ● The projector can be focused from 4.6’(1.4m) ~ 35.4’(10.8m). ● Refer to the figure below to adjust the screen size. Screen Size (W x H) mm Height (H1) 30” Height (H2) 610 x 457 17.1”(435mm) 0.9”(22mm) 60” 1219 x 914 ...

  • BOXLIGHT CP-11t - page 8

    8 PREP ARA TION ● Do not cover the vent slot. ● Keep the rear grill at least 3’(1m) away from any object. ● Keep sides clear of any obstructions. Obstructions may block cooling air. This projector is equipped with cooling fans for protection from overheating. Pay attention to the following to ensure proper ventilation and avoid a possible r ...

  • BOXLIGHT CP-11t - page 9

    9 PREP ARA TION MO VING THE PR OJECT OR Use the Carry Handle when moving the Projector. When moving the projector, replace the lens cover and retract feet to prevent damage to the lens and cabinet. When this projector is not in use for an extended period, replace the lens cover, retract the Adjustable Feet and apply the dust cover supplied with thi ...

  • BOXLIGHT CP-11t - page 10

    10 CONNECTING THE PR OJECT OR TERMINALS OF THE PR OJECT OR S-VIDEO R-A UDIO-L (MONO) VIDEO A UDIO IN OUT CONTROL PORT COMPUTER IN MONITOR OUT Connect the computer output to this terminal. (Refer to P12, 13.) When controlling the computer with the Remote Control of this projector, connect the mouse port of your personal computer to this terminal. (R ...

  • BOXLIGHT CP-11t - page 11

    11 CONNECTING THE PR OJECT OR CONNECTING T O THE VIDEO EQUIPMENT S-VIDEO R-A UDIO-L (MONO) VIDEO A UDIO IN OUT CONTROL PORT COMPUTER IN MONITOR OUT Video Source (example) Video Cassette Recorder Video Disc Player Video Audio Cable ✽ S-VIDEO Cable ✽ Audio Amplifier Audio Speaker (stereo) External Audio Equipment Audio Cable (Stereo) ✽ Terminal ...

  • BOXLIGHT CP-11t - page 12

    12 CONNECTING THE PR OJECT OR ON 1 2 3 4 56 DIP CONNECTING T O THE COMPUTER To connect to the computer, refer to the figure below. IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA) VGA Cable Monitor Output Desktop type Laptop type Monitor Audio Speaker (stereo) Audio Amplifier Control Cable for Serial Port ✽ Control Cable for PS/ ...

  • BOXLIGHT CP-11t - page 13

    13 CONNECTING THE PR OJECT OR S-VIDEO R-A UDIO-L (MONO) VIDEO A UDIO IN OUT CONTROL POR T COMPUTER IN MONIT OR OUT 13" MODE (640 x 480) 16" MODE (832 x 624) 19" MODE (1024 x 768) OFF ON ON ON ON ON ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF 12 3 4 5 6 ON 1 DIP ON OFF 23456 CONTROL PORT AUDIO OUT AUDIO IN MONITOR OUT COMPUTER IN U ...

  • BOXLIGHT CP-11t - page 14

    14 BEFORE OPERA TION OPERA TION OF THE REMO TE CONTROL V OLUME ON-OFF FOCUS ZOOM VIDEO COMPUTER D.ZOOM MENU MUTE LASER KEYST ONE NO SHO W FREEZE A UTO IMA GE NORMAL LOCK Used to select COMPUTER output source. (P22) Used to select VIDEO source. (P29) Used to execute the item selected or to expand the image in DIGITAL ZOOM mode. (P28) It is also used ...

  • BOXLIGHT CP-11t - page 15

    15 BEFORE OPERA TION V OLUME ON-OFF FOCUS ZOOM VIDEO COMPUTER D.ZOOM MENU MUTE LASER KEYST ONE NO SHO W FREEZE A UTO IMA GE NORMAL LOCK To insure safe operation, please observe the following precautions : ● Use (2) AA type alkaline batteries. ● Replace two batteries at the same time. ● Do not use a new battery with a used battery. ● Avoid c ...

  • BOXLIGHT CP-11t - page 16

    ZOOM FOCUS V OLUME MENU MODE SELECT AU TO IM AG E NORMAL ON – OFF LAMP READ Y W ARNING TEMP . LAMP REPLA CE 16 BEFORE OPERA TION T OP CONTR OLS AND INDICA T ORS Used to select zoom adjust. (P20) Used to open or close the MENU operation. (P17, 18) MENU BUTTON MODE BUTTON AUTO IMAGE BUTTON READY INDICATOR SELECT BUTTON POWER ON – OFF BUTTON FOCUS ...

  • BOXLIGHT CP-11t - page 17

    17 BEFORE OPERA TION HO W T O OPERA TE ON-SCREEN MENU FLO W OF ON-SCREEN MENU Display ON-SCREEN MENU Press MENU button to display the ON-SCREEN MENU (MENU BAR). The red frame is the POINTER. Select the ITEM by pressing SELECT button. The dialog box of the ITEM appears. Move the POINTER (red frame) to the ITEM ICON that you want to select by pressin ...

  • BOXLIGHT CP-11t - page 18

    18 BEFORE OPERA TION MENU B AR SYSTEM MENU Used to select a computer system. (Refer to P22) IMAGE MENU Used to adjust the computer image. [Fine sync. / Total dots / White Balance / Contrast / Brightness] (Refer to P26) PC ADJUST MENU Used to adjust the parameters to match with the input signal format. (Refer to P24, 25) SETTING MENU Used to set the ...

  • BOXLIGHT CP-11t - page 19

    19 B ASIC OPERA TION TURNING ON THE PR OJECT OR Connect the projector's AC power cord into a wall outlet. The LAMP indicator lights RED, and the READY indicator lights GREEN. Press the power ON-OFF button on the Remote Control Unit or on the Top Control to ON. The LAMP POWER indicator dims, and the Cooling Fans start to operate. The Preparatio ...

  • BOXLIGHT CP-11t - page 20

    20 B ASIC OPERA TION ADJUSTING THE IMA GE The message disappears after 4 seconds. The message disappears after 4 seconds. KEYST ONE ADJUSTMENT 1 Press the KEYSTONE ▲ / ▼ button on the Remote Control Unit or select the Keystone on the SCREEN menu. (Refer to page 28, 29.) The message “ Keystone ” is displayed. 2 Correct the Keystone distortio ...

  • BOXLIGHT CP-11t - page 21

    21 B ASIC OPERA TION Press the VOLUME (+/ – ) button(s) on the Top Control or on the Remote Control Unit to adjust the volume. The Volume dialog box appears on the screen for a few seconds. The VOLUME (+) button increases the volume, and the VOLUME ( – ) button decreases the volume. Press the MUTE button on the Remote Control Unit to mute the s ...

  • BOXLIGHT CP-11t - page 22

    MODE button 22 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Computer and press the SELECT button. COMPUTER MODE SELECTING COMPUTER MODE MENU OPERA TION When selecting the Computer Mode, the Current Mode display appears. It shows the information of the computer of the mode selected. CURRENT M ...

  • BOXLIGHT CP-11t - page 23

    23 COMPUTER MODE Basically this projector can accept the signal from all computers with the V, H-Frequency mentioned below and less than 135 MHz of Dot Clock. NOTE : Specifications are subject to change without notice. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720 x 400 31.47 70.09 VGA 3 640 x 400 31. ...

  • BOXLIGHT CP-11t - page 24

    24 COMPUTER MODE PC ADJUSTMENT This Projector can automatically tune to the display signals from most personal computers currently distributed. However, some computers employ the special signal formats which are different from the standard ones and may not be tuned by Multiscanning of this projector. If this happens, the projector cannot reproduce ...

  • BOXLIGHT CP-11t - page 25

    The number of the total vertical lines. Adjust the number to match the image of your personal computer. Total lines Recalls the parameter data that was previously adjusted. Reset Stores the parameters in the memory. Stored Clears the parameter data previously set. Mode free Closes the PC ADJUST Menu. Quit The number of the total dots in one horizon ...

  • BOXLIGHT CP-11t - page 26

    26 COMPUTER MODE Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the item that you want to change by pressing the POIN ...

  • BOXLIGHT CP-11t - page 27

    27 COMPUTER MODE The Auto Image function is provided to automatically adjust Fine sync., Total dots, and Picture Position for most computers. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select AUTO IMAGE and press the SELECT button. Another dialog box AUTO IMAGE Menu will appear. Move the arrow to ...

  • BOXLIGHT CP-11t - page 28

    28 COMPUTER MODE PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SCREEN and press the SELECT button. Another dialog box PICTURE SCREEN Menu will appear. To adjus ...

  • BOXLIGHT CP-11t - page 29

    29 MODE button VIDEO MODE Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Video and press the SELECT button. SELECTING VIDEO MODE DIRECT OPERA TION Select VIDEO mode by pressing the MODE button on the Top Control or the VIDEO button on the Remote Control Unit. MENU OPERA TION COMPUTER VIDEO SEL ...

  • BOXLIGHT CP-11t - page 30

    30 VIDEO MODE PICTURE IMA GE ADJUSTMENT Each of the keys operates as follow. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the ar ...

  • BOXLIGHT CP-11t - page 31

    31 SETTING SETTING MENU Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SETTING and press the SELECT button. Another dialog box SETTING Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the item that you want to set, and then press the SELECT butt ...

  • BOXLIGHT CP-11t - page 32

    32 APPENDIX OPERA TING WIRELESS MOUSE INST ALLA TION The Wireless Remote Control Unit is not only able to operate the projector but also usable as a wireless mouse for most Personal Computers. The POINT buttons and the two CLICK buttons are used for the wireless mouse operation. The wireless mouse is available only when PC mouse pointer is displaye ...

  • BOXLIGHT CP-11t - page 33

    33 APPENDIX CLEANING THE PR OJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch the lens. When the projector is not in use, replace the lens cover. 1 3 Lightly wipe the cleaning cloth over the lens. 2 Foll ...

  • BOXLIGHT CP-11t - page 34

    34 APPENDIX LAMP REPLA CEMENT INDICA T OR When the life of the Lamp of this projector draws to an end, the LAMP REPLACEMENT indicator lights yellow. When the image becomes dark or the color of the image becomes unnatural, replacement of the Lamp is required. Turn off the projector and disconnect the AC plug. Allow the projector to cool for at least ...

  • BOXLIGHT CP-11t - page 35

    35 APPENDIX TR OUBLESHOO TING Before calling your dealer or service station for assistance, check the matters below once again. 1. Make sure you have connected the projector to your equipment as described in the section "CONNECTING THE PROJECTOR" on pages 10 ~ 13. 2. Check cable connection. Verify that all computer, video and power cord a ...

  • BOXLIGHT CP-11t - page 36

    36 APPENDIX W ARNING : High v oltages are used to operate this projector . Do not attempt to open the cabinet. Remote Control Unit does not work. ● Check the batteries. ● Check the ALL-OFF switch on the Remote Control Unit is set to “ ON. ” . ● Make sure nothing is between the Remote Receiver and the Remote Control Unit. ● Make sure you ...

  • BOXLIGHT CP-11t - page 37

    37 0.9" TFT Active Matrix type, 3 panels TECHNICAL SPECIFICA TIONS Multi-media Projector 8.6 lbs (3.9 kg) 9.41" x 3.54" x 12.72" (239mm x 90mm x 323mm) (not including Adjustable Feet) 800 x 600 dots 1,440,000 (800 x 600 x 3 panels) PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N H-sync. 15 ~ 80 KHz, V-sync. 50 ~ 100 Hz Adjustable fr ...

  • BOXLIGHT CP-11t - page 38

    LIMITED W ARRANTY BOXLIGHT CORPORATION ( “ BOXLIGHT ” ) warrants that each Boxlight CP-11t ( “ the Product ” ) sold hereunder will conform to and function in accordance with the written specifications of BOXLIGHT. Said limited warranty shall apply only to the first person or entity that purchases the Product for personal or business use and ...

Manufacturer BOXLIGHT Category Projector

Documents that we receive from a manufacturer of a BOXLIGHT CP-11t can be divided into several groups. They are, among others:
- BOXLIGHT technical drawings
- CP-11t manuals
- BOXLIGHT product data sheets
- information booklets
- or energy labels BOXLIGHT CP-11t
All of them are important, but the most important information from the point of view of use of the device are in the user manual BOXLIGHT CP-11t.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals BOXLIGHT CP-11t, service manual, brief instructions and user manuals BOXLIGHT CP-11t. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product BOXLIGHT CP-11t.

Similar manuals

A complete manual for the device BOXLIGHT CP-11t, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use BOXLIGHT CP-11t by users. Manuals are usually written by a technical writer, but in a language understandable to all users of BOXLIGHT CP-11t.

A complete BOXLIGHT manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual BOXLIGHT CP-11t - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the BOXLIGHT CP-11t, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the BOXLIGHT CP-11t, that we can find in the current document
3. Tips how to use the basic functions of the device BOXLIGHT CP-11t - which should help us in our first steps of using BOXLIGHT CP-11t
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with BOXLIGHT CP-11t
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of BOXLIGHT CP-11t in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning BOXLIGHT CP-11t?

Use the form below

If you did not solve your problem by using a manual BOXLIGHT CP-11t, ask a question using the form below. If a user had a similar problem with BOXLIGHT CP-11t it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)