English dropdown-ico

Manual Lenovo 9127

62 pages 1.8 mb
Download

Go to site of 62

Summary
  • Lenovo 9127 - page 1

    ThinkCentre Hardw are Installation and Replacement Guide Machine T ypes 9120, 9127, 9129, 9134, 9136, 9139, 9141, 9143, 9156, 9158, 9171, 9191 ...

  • Lenovo 9127 - page 2

    ...

  • Lenovo 9127 - page 3

    T hin kC e n tr e Hard w a re In sta ll a ti o n an d Repl ac e m ent Gu i d e ...

  • Lenovo 9127 - page 4

    Note Before using this information and the pr oduct it supports, be sure to read and understand the Safety and W arranty Guide for this product and “Notices,” on page 49. First Edition (June 2007) © Copyright Lenovo 2005, 2007. Portions © Copyright International Business Machines Corporation 2005. All rights reserved. U.S. GOVERNMENT USERS ? ...

  • Lenovo 9127 - page 5

    Contents Figures . . . . . . . . . . . . . . .v Chapter 1. Important safety information 1 Chapter 2. Overview . . . . . . . . .3 Additional information resour ces . . . . . . .3 Handling static-sensitive devices . . . . . . . .4 Locations . . . . . . . . . . . . . . .5 Locating controls and connectors on the fr ont of your computer . . . . . . . . ...

  • Lenovo 9127 - page 6

    iv Hardwar e Installation and Replacement Guide ...

  • Lenovo 9127 - page 7

    Figures 1. Controls and connectors . . . . . . . . .5 2. Connector locations . . . . . . . . . .6 3. Component locations . . . . . . . . . .8 4. Component locations . . . . . . . . . .9 5. Removing the computer cover . . . . . .1 2 6. Removing the front bezel . . . . . . . .1 3 7. Open the retaining clips . . . . . . . .1 4 8. Installing the memory ...

  • Lenovo 9127 - page 8

    vi Hardwar e Installation and Replacement Guide ...

  • Lenovo 9127 - page 9

    Chapter 1. Important safety information CAUTION: Before using this manual, it is important that you read and understand all the related safety information for this product. Refer to the Safety and Warranty Guide that you received with this product for the latest safety information. Reading and understanding this safety information reduces the risk ...

  • Lenovo 9127 - page 10

    2 Hardwar e Installation and Replacement Guide ...

  • Lenovo 9127 - page 11

    Chapter 2. Overview This guide provides information about r eplacing Customer Replaceable Units (CRUs). This guide does not include procedur es for all parts. It is expected that cables, switches, and certain mechanical parts be replaced by trained service personnel without the need for step-by-step procedur es. Note: Use only parts provided by Len ...

  • Lenovo 9127 - page 12

    Handling static-sensitive devices Do not open the static-protective package containing the new part until the defective part has been removed fr om the computer and you are r eady to install the new part. Static electricity , although harmless to you, can seriously damage computer components and parts. When you handle parts and other computer compo ...

  • Lenovo 9127 - page 13

    Locations This chapter provides illustrations to help locate the various connectors, contr ols, and components of the computer . Locating controls and connectors on the front of your computer Figure 1 shows the location of the contr ols and connectors on the front of your computer . Note: Not all computer models will have the following controls and ...

  • Lenovo 9127 - page 14

    Locating connectors on the rear of your computer Figure 2 shows the location of connectors on the r ear of your computer . Some connectors on the rear of your computer ar e color-coded to help you determine where to connect the cables on your computer . 1 Power supply diagnostic LEDs (some models) 10 Ethernet connector 2 V oltage ...

  • Lenovo 9127 - page 15

    Connector Description Standard mouse connector Used to attach a mouse, trackball, or other pointing device that uses a standard mouse connector . Standard keyboar d connector Used to attach a keyboard that uses a standar d keyboard connector . Serial connector Used to attach an external modem, serial printer , or other devices that use a 9-pin seri ...

  • Lenovo 9127 - page 16

    Locating components To remove the computer cover , see “Removing the cover” on page 11 . Figure 3 shows the location of the various components in your computer . 1 Micropr ocessor fan and heat sink 5 PCI adapter connector 2 Memory modules 6 PCI Express x1 adapter connector 3 PCI Express x16 graphics adapter connect ...

  • Lenovo 9127 - page 17

    Identifying parts on the system board Figure 4 shows the location of parts on the system boar d. 1 Micropr ocessor fan connector 14 Front USB connectors (2) 2 Micropr ocessor and heat sink 15 Battery 3 Memory connector 1 16 Clear CMOS/Recovery jumper 4 Memory connector 2 17 Serial (COM) connector 5 ...

  • Lenovo 9127 - page 18

    10 Hardwar e Installation and Replacement Guide ...

  • Lenovo 9127 - page 19

    Chapter 3. Installing options and replacing hardware This chapter provides an intr oduction to the features and options that ar e available for your computer . Yo u can expand the capabilities of your computer by adding memory , adapters, or drives. When installing an option, use these instructions along with the instructions that come with the opt ...

  • Lenovo 9127 - page 20

    5. If there ar e thumbscrews securing the cover , remove them. 6. Press the cover -release button on the side of the computer cover , slide the cover to the rear , and then remove the cover . Removing and replacing the front bezel This section provides instr uctions on how to remove and replace the fr ont bezel. 1. Remove the computer cover . See ? ...

  • Lenovo 9127 - page 21

    2. Remove the front bezel by releasing the thr ee plastic tabs on the left side and pivoting the bezel outward. Car efully set the bezel to the side without disconnecting the power switch and LED assembly cable. 3. To reinstall the bezel, align the plastic tabs on the right side of the bezel with the corresponding holes in the chassis, then pivot i ...

  • Lenovo 9127 - page 22

    Installing internal options Important Read “Handling static-sensitive devices” on page 4 before r emoving the computer cover . Installing memory Y our computer has four connectors for installing dual inline memory modules (DIMMs) that provide up to a maximum of 8.0 GB of system memory . When installing memory modules, the following rules apply: ...

  • Lenovo 9127 - page 23

    4. Make sure that the notch 1 on the memory module aligns correctly with the connector key 2 on the system board. Push the memory module straight down into the connector until the retaining clips close. What to do next: v To work with another option, go to the appropriate section. v To complete the installation, go to Chapter 4, “Comp ...

  • Lenovo 9127 - page 24

    2. At the rear of the computer , press the r elease button 1 to open the adapter latch 2 and remove the slot cover . 3. Remove the adapter from its static-protective package. 4. Install the adapter into the appropriate connector on the system board. Figure 9. Opening the adapter latch 16 Hardwar e Installation and Replacement Guide ...

  • Lenovo 9127 - page 25

    5. Pivot the adapter latch to the closed position to secure the adapters. What to do next: v To work with another option, go to the appropriate section. v To complete the installation, go to Chapter 4, “Completing the parts replacement,” on page 43. Figure 10. Closing the adapter latch Chapter 3. Installing options and replacing har dware 17 ...

  • Lenovo 9127 - page 26

    Installing internal drives This section provides information and instr uctions for installing internal drives. Internal drives are devices that your computer uses to r ead and store data. Yo u can add drives to your computer to increase storage capacity and to enable your computer to read other types of media. Some of the types of drives that ar e ...

  • Lenovo 9127 - page 27

    Figure 11 shows the location of the drive bays. The following list describes the types and size of drives that you can install in each bay: 1 Bay 1 - Maximum height: 43.0 mm (1.7 in.) v Optical drive such as CD drive or DVD drive (preinstalled in some models) v 5.25-inch hard disk drive v 3.5-inch hard disk drive (requir es a Universal Adapte ...

  • Lenovo 9127 - page 28

    2. Remove the front bezel by releasing the thr ee plastic tabs on the left side and pivoting the bezel outward. Car efully set the bezel to the side without disconnecting the power switch and LED assembly cable. Note: Notice the spare r etainer bracket 1 attached to the side of the upper drive cage. 3. Remove the metal static shield from the ...

  • Lenovo 9127 - page 29

    7. For a 5.25-inch drive, install a retainer bracket on the side of the drive. 8. For a 3.5-inch drive, you must use a Universal Adapter Bracket, 5.25 to 3.5-inch. Yo u can obtain a Universal Adapter Bracket, 5.25 to 3.5-inch from a local computer retailer or by contacting the Customer Support Center . Install a retainer bracket on the side of the ...

  • Lenovo 9127 - page 30

    3. Connect one end of the signal cable to the drive and the other to the IDE connector on the system board. 4. Locate the extra four-wir e power connector and connect it to the drive. Connecting a serial ATA drive A serial optical or additional hard disk drive can be connected to any available S ATA IDE connector . 1. Locate the signal cable that c ...

  • Lenovo 9127 - page 31

    Replacing the battery Y our computer has a special type of memory that maintains the date, time, and settings for built-in features, such as parallel-port assignments (configuration). A battery keeps this information active when you turn off the computer . The battery normally requir es no charging or maintenance thr oughout its life; however , no ...

  • Lenovo 9127 - page 32

    Replacing the power supply assembly Attention Do not open your computer or attempt any repair befor e reading the “Important safety information” in the Safety and Warranty Guide that was included with your computer . To obtain a copy of the Safety and Warranty Guide , go to the Support We b site at http://www .lenovo.com/support. This section p ...

  • Lenovo 9127 - page 33

    Replacing the heat sink Attention Do not open your computer or attempt any repair befor e reading the “Important safety information” in the Safety and Warranty Guide that was included with your computer . To obtain a copy of the Safety and Warranty Guide , go to the Support We b site at http://www .lenovo.com/support. This section provides inst ...

  • Lenovo 9127 - page 34

    7. Position the new heat sink on the microprocessor socket and then position the clamp on the plastic retention bracket. Pivot the handle 1 to clamp the heat sink to the plastic retention bracket. 8. Reconnect the heat sink and the fan assembly cable to the system board. 9. Go to Chapter 4, “Completing the parts replacement,” on page 43. ...

  • Lenovo 9127 - page 35

    3. Press the blue r elease tab 1 down, slide the hard drive cage 2 back, and pivot it outward. 4. Remove the hard disk drive cage from the chassis by simply sliding it outward. 5. Pull on the blue handle 3 to release and remove har d disk drive from drive cage. 6. Remove the hard disk drive from the blue plastic bracket by flexing ...

  • Lenovo 9127 - page 36

    7. To install the new hard disk drive into the blue bracket, flex the bracket and align the pins 1 through 4 on the bracket with the holes in the har d disk drive. See Figure 23. Do not touch the cir cuit board 5 on the bottom of the hard disk drive. 8. Slide the new hard disk drive into the drive cage until it snaps into position ...

  • Lenovo 9127 - page 37

    9. Align the drive cage pivot pin with the slot 1 in the upper drive cage and slide the hard disk drive cage into the chassis. 10. Connect the signal and power cables to the rear of the new hard disk drive. 11 . Press down on the metal latch 2 and pivot in the drive cage into place and then slide it forward until it snaps into position. ...

  • Lenovo 9127 - page 38

    Note: If needed, there is a spar e retainer bracket 1 attached to the side of the upper drive cage. 4. Remove the retainer bracket from the drive being r eplaced and install it on the new drive. 5. Slide the new optical drive into the bay from the front until it snaps into position. 6. Connect the signal and power cables to the drive. Figure ...

  • Lenovo 9127 - page 39

    7. Go to Chapter 4, “Completing the parts replacement,” on page 43. Replacing the diskette drive Attention Do not open your computer or attempt any repair befor e reading the “Important safety information” in the Safety and Warranty Guide that was included with your computer . To obtain a copy of the Safety and Warranty Guide , go to the Su ...

  • Lenovo 9127 - page 40

    5. Remove the retainer bracket from the failing diskette drive and install it on the new diskette drive. 6. Slide the new diskette drive into the drive bay until it snaps into position. 7. Connect the flat cable to the new diskette drive. 8. Go to Chapter 4, “Completing the parts replacement,” on page 43. Replacing a memory module Attention Do ...

  • Lenovo 9127 - page 41

    4. Position the replacement memory module over the memory connector . Make sure the notch 1 on the memory module aligns corr ectly with the connector key 2 on the system board. Push the memory module straight down into the connector until the retaining clips close. 5. Go to Chapter 4, “Completing the parts replacement,” on page 43. ...

  • Lenovo 9127 - page 42

    2. At the rear of the computer , press the r elease button 1 to open the adapter latch 2 and remove the adapter by pulling it straight out of the adapter connector . Figure 31. Removing the PCI adapter 34 Hardwar e Installation and Replacement Guide ...

  • Lenovo 9127 - page 43

    3. Install the new adapter into the same adapter connector . 4. Ensure the adapter is fully seated into the adapter connector . 5. At the rear of the computer , pivot the adapter latch to the closed position to secure the adapter . 6. Go to Chapter 4, “Completing the parts replacement,” on page 43. Figure 32. Install a new PCI adapter Chapter 3 ...

  • Lenovo 9127 - page 44

    Replacing the front fan assembly Attention Do not open your computer or attempt any repair befor e reading the “Important safety information” in the Safety and Warranty Guide that was included with your computer . To obtain a copy of the Safety and Warranty Guide , go to the Support We b site at http://www .lenovo.com/support. This section prov ...

  • Lenovo 9127 - page 45

    6. Pull on the tips of the rubber mounts until the fan assembly is in place. 7. Connect the front fan assembly cable to the power fan connector on the system board. 8. Reinstall the front bezel. 9. Go to Chapter 4, “Completing the parts replacement,” on page 43 Replacing the rear fan assembly Attention Do not open your computer or attempt any r ...

  • Lenovo 9127 - page 46

    3. Pull the rear fan assembly out of the chassis. 4. Install the new rear fan assembly by aligning the rubber mounts of the r ear fan assembly with the holes on the chassis and push the rubber mounts through the holes. Figure 33. Removing the rear fan assembly 38 Hardwar e Installation and Replacement Guide ...

  • Lenovo 9127 - page 47

    5. Pull on the tips of the rubber mounts until the fan assembly is in place. 6. Connect the rear fan assembly cable to the system fan connector on the system board. 7. Go to Chapter 4, “Completing the parts replacement,” on page 43. Replacing the keyboard Attention Do not open your computer or attempt any repair befor e reading the “Important ...

  • Lenovo 9127 - page 48

    3. Locate the keyboard connector . See Figure 35. Note: Y our keyboard might be connected to a standard keyboar d connector 1 or a USB connector 2 . Depending on where your keyboar d is connected, see “Locating connectors on the rear of your computer” on page 6 or “Locating controls and connectors on the fr ont of your computer” ...

  • Lenovo 9127 - page 49

    Replacing the mouse Attention Do not open your computer or attempt any repair befor e reading the “Important safety information” in the Safety and Warranty Guide that was included with your computer . To obtain a copy of the Safety and Warranty Guide , go to the Support We b site at http://www .lenovo.com/support. This section provides instr uc ...

  • Lenovo 9127 - page 50

    42 Hardwar e Installation and Replacement Guide ...

  • Lenovo 9127 - page 51

    Chapter 4. Completing the parts replacement After replacing the parts, you need to close the cover and r econnect cables, including telephone lines and power cords. Also, depending on the part that was replaced, you might need to confirm the updated information in the Setup Utility program. Refer to ″ Using the Setup Utility ″ in the User Guide ...

  • Lenovo 9127 - page 52

    Note: In most areas of the world, Lenovo r equires the r eturn of the defective CRU. Information about this will come with the CRU or will come a few days after the CRU arrives. Obtaining device drivers Yo u can obtain device drivers for operating systems that are not pr einstalled at http://www .lenovo.com/support/ on the W orld W ide W eb. Instal ...

  • Lenovo 9127 - page 53

    Chapter 5. Security features To help prevent har dware theft and unauthorized access to your computer , several security lock options are available. In addition to a physical lock, unauthorized use of your computer can be prevented by a softwar e lock that locks the keyboard until a correct passwor d is typed in. Make sure that any security cables ...

  • Lenovo 9127 - page 54

    Padlock Y our computer is equipped with a padlock loop such that the cover cannot be removed when a padlock is installed. Password protection To deter unauthorized use of your computer , you can use the Setup Utility program to set a passwor d. When you turn on your computer , you are prompted to type the password to unlock the keyboar d for normal ...

  • Lenovo 9127 - page 55

    3. Move the jumper from the standard position (pins 1 and 2) to the maintenance or configure position (pins 2 and 3). 4. Replace the computer cover and connect the power cord. See Chapter 4, “Completing the parts replacement,” on page 43. 5. Restart the computer , leave it on for approximately 10 seconds. T urn off the computer by holding the p ...

  • Lenovo 9127 - page 56

    48 Hardwar e Installation and Replacement Guide ...

  • Lenovo 9127 - page 57

    Appendix. Notices Lenovo may not offer the pr oducts, services, or features discussed in this document in all countries. Consult your local Lenovo repr esentative for information on the products and services curr ently available in your area. Any refer ence to a Lenovo product, pr ogram, or service is not intended to state or imply that only that L ...

  • Lenovo 9127 - page 58

    vary significantly . Some measurements may have been made on development-level systems and there is no guarantee that these measur ements will be the same on generally available systems. Furthermore, some measur ements may have been estimated through extrapolation. Actual r esults may vary . Users of this document should verify the applicable data ...

  • Lenovo 9127 - page 59

    Index A adapter connectors 15 installing 15 adapter latch 16 audio-line-in connector 7 audio-line-out connector 7 B battery , replacing 23 bay 1, installing 19 bay 2, installing 19 bezel, replacing 12 C cable lock, security 45 CMOS, clearing 46 components, internal 8 connecting drives 21 connector description 7 connectors front 5 rear 6 cover remov ...

  • Lenovo 9127 - page 60

    password erasing 46 lost or forgotten 46 password pr otection 46 PCI adapter 15 PCI adapter , r eplacing 33 power supply , replacing 24 protection, passwor d 46 R rear connectors 6 rear fan assembly , replacing 37 removing the cover 11 replacing battery 23 diskette drive 31 front bezel 12 front fan 36 hard drive 26 heat sink 25 keyboard 39 memory m ...

  • Lenovo 9127 - page 61

    ...

  • Lenovo 9127 - page 62

    Part Number: 43C4834 Printed in USA (1P) P/N: 43C4834 ...

Manufacturer Lenovo Category Laptop

Documents that we receive from a manufacturer of a Lenovo 9127 can be divided into several groups. They are, among others:
- Lenovo technical drawings
- 9127 manuals
- Lenovo product data sheets
- information booklets
- or energy labels Lenovo 9127
All of them are important, but the most important information from the point of view of use of the device are in the user manual Lenovo 9127.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Lenovo 9127, service manual, brief instructions and user manuals Lenovo 9127. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Lenovo 9127.

Similar manuals

A complete manual for the device Lenovo 9127, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Lenovo 9127 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Lenovo 9127.

A complete Lenovo manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Lenovo 9127 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Lenovo 9127, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Lenovo 9127, that we can find in the current document
3. Tips how to use the basic functions of the device Lenovo 9127 - which should help us in our first steps of using Lenovo 9127
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Lenovo 9127
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Lenovo 9127 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Lenovo 9127?

Use the form below

If you did not solve your problem by using a manual Lenovo 9127, ask a question using the form below. If a user had a similar problem with Lenovo 9127 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)