-
Belling IH60R - page 1
Belling IH60R Part No 082755403 Date 22/11/2012 Users Guide & Installation Handbook ...
-
Belling IH60R - page 2
CONTENTS & INTRODUCTION CONTENTS • SAFET Y • USING THE PRODUCT • CLEANING • INST ALL A TION INSTRUCTIONS • TECHNICAL DA T A • CUSTOMER CARE INTRODUCTION Thank you for buying this British- built appliance from us. This guide book is designed to help you through each step of owning your new appliance, from installati ...
-
Belling IH60R - page 3
Safety WARNING! - This appliance and its accessible parts may become hot during use. T o avoid burns, chi ldren less than 8 years of age shall be kept aw ay unless continuously supervised. This appliance can be used by children aged from 8 y ears and above and persons with re- duced physical, sensory or mental capabilities or lack of experience and ...
-
Belling IH60R - page 4
Safety General Servicing should be carried out only by authorised personnel. Do not spray aer osols in the vicinity of this appliance while it is in operation. Donotstoreoruseammableliquidsor items in the vicinity of this appliance. Do not modify this appliance. • Always ensure that pan bases are dry ,stableand ...
-
Belling IH60R - page 5
Safety Avoiding damage to the appliance. The ceramic glass of the hob can be damaged by objects falling onto it. Be especially careful with heavy jars of f ood being stored in cupboards above the hob , we recommend storing them away f rom the hob area. The edge of the glass can be damaged by being knocked by cookware. Cookware made of cast iron, ca ...
-
Belling IH60R - page 6
USING THE HOB - INDUCTION USING THE HOTPLATE • Commercial simmering aids should not be used as they create excessive temperatures that can damage the surface and may cause a hazard. • Do not place aluminium foil or plastic utensils on the ceramic glass, as they may melt and damage the surface. • Do not use the ceramic glass hotplate ...
-
Belling IH60R - page 7
USING THE HOB - INDUCTION Feature Symbol Description Eco power InductionPoweristhemostener gyefcientmeansof cooking food, providing f ast heat up and boiling times Rotary controls Simpleknobcontrolwithallthebenetsofinduction technology Digital display Secret till “lit” hob display No. ...
-
Belling IH60R - page 8
USING THE HOB - INDUCTION BASIC HOB FUNCTION Initial Power up (switching on the electrical supply to the hob) After connecting the hob to the mains electrical supply , all segments of the displaysareilluminated(lit)andabeep sounds. The hob then initialises after which, all displaysaredeactiv ated(LEDsgoout) an ...
-
Belling IH60R - page 9
Griddle Zone Large pans and griddle plates can be placed across the two left hand zones. ! Dry or empty Griddles and Frying pans can heat up very quickly on power settings greater than 5, this can, if not closely monitored lead to the induction showing a overheat warning “Shown b y a ashingC”Theinductionunitwillauto - ma ...
-
Belling IH60R - page 10
Thishelpstoreducetheriskofre through misuse of the hob. If there is an overheat situation, the hob will display the appropriate code detailed inthe“hobstatuscodestable”(next page). Approx Glass Temperature o C Hob Action 190 Automatic P ower Reduction 220 Power Automati- cally Shuts down Note:- Th ...
-
Belling IH60R - page 11
USING THE HOB - INDUCTION Ho b Status Codes Fault De scr ip tion Action "r" Max Power Se tt ing reached (Only on 13 Amp versions) Reduce t he power se tt ings on other zones "U" Indictes no pan or suitable pan on t he cook zone Ensure t he co rr ec t pan size is selected and t ha t t he pan is s uitable f or induction use " ...
-
Belling IH60R - page 12
USING THE HOB - INDUCTION Heater E rr ors & Alarms Fault De scr ip tion Turn th e controls t o th e o ff postion and turn t he power o ff and back o n to reset th e system F / 5 Co mm unication error Turn th e controls t o th e o ff postion and turn t he power o ff and back o n to reset th e system F / 1 Induction heater temperatur e sensor (NT ...
-
Belling IH60R - page 13
CLEANING ELECTRIC HOB Ceramic glass hobs • The ceramic hob top can be cleaned using a clean, damp cloth or kitchen paper . Do not use a used dishcloth orspongeastheycanleavealmof detergent on the surface which can lead to discoloration. Please ensure that the elements are cooled fully to avoid steam burns. • ...
-
Belling IH60R - page 14
installation General information Installation should only be carried out by aqualiedinstallerorengineer . Please keep to the following points most carefully; Although every care has been taken to ensure this appliance has no burrs, or sharp edges, we recommend that you wear protective gloves when install- ing and moving this applianc ...
-
Belling IH60R - page 15
installation CHOOSING YOUR INSTALLATION Make sure that the air inlets through the ventilator grids underneath the hob are never blocked. W e recommend that you install this ap- pliance in a work top which is a minimum 38mm deep. Thehobcanbettedintoaworktop less than 38mm deep, but the 20mm gap between hob base and appl ...
-
Belling IH60R - page 16
installation Clearances and dimension – require- ments No shelf or overhang of combustible material should be closer than 650mm above the hob. There must be a minimum clearance of 50mm between the edges of the hob and any side walls; this clear ance must be maintained up to 420mm above the worktop. There must be a minimum clearance of 50mm betwee ...
-
Belling IH60R - page 17
installation Fitting into worktop Cut a hole in the work surface to the required size. A clearance of at least 50mm should be maintained between the cutout and any rear or side wall. The worktop must be of heat-resistant material or covered with heat -resistant material. Protecting the cut-out; The types of chipboard used for work surfaces swell re ...
-
Belling IH60R - page 18
installation Fixing Bracket Advice Dealing with sides, cross-rails and back -panels in the cabinetry . Depending on the cabinets, the worktop thickness and the hob positioning, it is possible for the hob base and/or the clamp brackets to interf ere with parts of the cabinet. Cut away cabinetry and use appr opriate xingbracketsf oryour? ...
-
Belling IH60R - page 19
installation Connect to the electricity supply (For Fixed Wiring only) WARNING: This appliance must be earthed. Only connect to the electrical mains terminal with the power switched off . The electrical mains terminal is live. Follow the terminal block connection schematic. Loose and inappropriate connections can make the terminal overheat. Ensure? ...
-
Belling IH60R - page 20
TECHNICAL DATA SINGLE PHASE SUPPLY: 230 -240V ~ 50Hz 6.6kW - 7.2kW 3 PHASE SUPPLY: 230 / 400V 3N ~ 50Hz Individual Cook Zone Power Ratings Cook Zone Normal Power/Boost Power Rating kW LHF 1.5/2.0 LHR 1.2/1.6 RHR 1.5/2.0 RHF 1.2/1.6 ...
-
Belling IH60R - page 21
CUSTOMER CARE CUSTOMER CARE WEB SHOP Having purchased a superior cooker , hob or hood from us, you’ll naturally want to keep it looking great. And who better to help you care for it than the manuf ac- turer? W e offer an extensive r ange of accesso- ries, components and cleaning products which, will instantly give your cooker a good as new look. ...
-
Belling IH60R - page 22
Please keep this handbook for f uture reference, or for an yone else who may use the appliance. ...
-
Belling IH60R - page 23
Please keep this handbook for f uture reference, or for an yone else who may use the appliance. ...
-
Belling IH60R - page 24
CUSTOMER CARE T o contact Belling about your appliance, please call Warranty Registration 0844 481 0182 to register your appliance Customer Care Helpline 0844 815 3746 incaseofdifcultywithintheUK Alternatively general, spar es and service information is available f rom our website at www.belling.co.uk Please ensure that you hav ...
Do you have a question concerning Belling IH60R?
Use the form below
If you did not solve your problem by using a manual Belling IH60R, ask a question using the form below. If a user had a similar problem with Belling IH60R it is likely that he will want to share the way to solve it.