-
Nissan Frontier (2013) - page 1
® 2013 FRON T I E R OWN E R’S MAN UAL For y our s afety , read car efully and keep in this v ehicle. 2013 N IS SAN FR O NTI E R D40-D D40-D Printing : November 2012 (17) Publication No.: OM1E 0D40U1 Printed in U .S.A. OM3E 0D40U0 ...
-
Nissan Frontier (2013) - page 2
W elcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you under- stand the operation and maintenance of your vehicle so that you may enjoy many miles (kilome- ters) of driving pleasure. Please rea ...
-
Nissan Frontier (2013) - page 3
For descriptions specified for four-wheel drive models, a mark is placed at the begin- ning of the applicable sections/items. As with other vehicles with features for off-road use, failure to operate four-wheel drive models correctly may result in loss of control or an accident. Be sure to read “Driving safety precautions” in the “Start- ing ...
-
Nissan Frontier (2013) - page 4
If you see this symbol, it means “Do not do this” or “Do not let this happen.” If you see a symbol similar to these in an illustra- tion, it means the arrow points to the front of the vehicle. Arrows in an illustration that are similar to these indicate movement or action. Arrows in an illustration that are similar to these call attention t ...
-
Nissan Frontier (2013) - page 5
NISSAN CARE S... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Y our NISSAN dealer is always available to assist you with all your automobile sales and service needs. However, if there is something that your NISSAN dealer c ...
-
Nissan Frontier (2013) - page 6
T able of Contents Illustrated table of contents Safety—Seats, seat belts and supplemental restraint system Instruments and controls Pre-driving checks and adjustments Monitor, climate, audio, phone and voice recognition systems Starting and driving In case of emergency Appearance and care Maintenance and do-it-yourself T echnical and consumer in ...
-
Nissan Frontier (2013) - page 7
...
-
Nissan Frontier (2013) - page 8
0 Illustrated table of contents Air bags, seat belts and child restraints ..............0 - 2 Exterior front ......................................0 - 3 Exterior rear .......................................0 - 4 Passenger compartment ...........................0 - 5 Instrument panel ...................................0 - 6 Engine compartment check ...
-
Nissan Frontier (2013) - page 9
1. 2nd row seat belts (P . 1-15) 2. Roof-mounted curtain side-impact and rollover supplemental air bag (P . 1-63) 3. Front seat belts (P . 1-15) 4. Head restraints (P .1-6 ) 5. Supplemental front-impact air bags (P .1-70) 6. Seats (P . 1-2) 7. Occupant classification sensor (pressure sensor) (P . 1-70) 8. Seat belt with pretensioners (P . 1-76) 9. ...
-
Nissan Frontier (2013) - page 10
1. Engine hood (P . 8-6) 2. Windshield wiper and washer switch (P . 2-26) 3. Windshield (P . 8-22) 4. Windows (P . 2-47) 5. Door locks, keyfob (if so equipped) , keys (P . 3-3, 3-6, 3-2) 6. Mirrors (P . 3-15) 7. Tire pressure (P . 8-33) 8. Flat tire (P . 6-3) 9. Tire chains (P . 8-40) 10. Headlight and turn signal switch (P . 2-28); Replacing bulbs ...
-
Nissan Frontier (2013) - page 11
1. Rear sliding window (if so equipped) (P .2-50) 2. V ehicle loading (P . 9-13) 3. T ruck box, tailgate (P . 3-17) 4. Replacing bulbs (P . 8-29) 5. Fuel-filler cap, fuel recommendation (P . 3-11, P . 9-4) See the page number indicated in paren- theses for operating details. LII0053 EXTERIOR REAR 0-4 Illustrated table of contents ...
-
Nissan Frontier (2013) - page 12
1. Map lights (if so equipped) (P . 2-53) 2. Sun visors (P . 3-14) 3. Rearview mirror (if so equipped) (P . 3-15) 4. V ents (P . 4-17) 5. Glove box (P . 2-42) 6. Shift selector (automatic transmission, if so equipped) (P . 5-13) 7. Cup holders (P . 2-44) 8. Front seats (P . 1-2) 9. Console box (P . 2-41) 10. Rear seats (P . 1-13) 11. Flat tire/Jack ...
-
Nissan Frontier (2013) - page 13
1. V ents (P . 4-17) 2. Headlight/fog light (if so equipped)/turn signal switch (P . 2-28) 3. Steering wheel switch for audio control (if so equipped)/Bluetooth® Hands- Free Phone System (if so equipped) (P . 4-75, P . 4-70, 4-71) 4. Driver supplemental air bag/horn P . 1-63, P . 2-32) 5. Meters, gauges and warning/indicator lights (P . 2-3, 2-14) ...
-
Nissan Frontier (2013) - page 14
15. Electronic locking rear differential (E-Lock) system switch (if so equipped) (P .2-35) Heated seat switch (if so equipped) (P . 2-33) Rear sonar switch (if so equipped) (P . 2-37) V ehicle Dynamic Control (VDC) OFF switch (P . 2-34) 16. Shift selector (P . 5-13, 5-18) 17. 4WD shift switch (if so equipped) (P . 5-26) 18. Climate controls (P . 4- ...
-
Nissan Frontier (2013) - page 15
QR25DE engine 1. Windshield-washer fluid reservoir (P . 8-15) 2. Fuse/fusible link box (P . 8-24) 3. Fuse and relay box (P . 8-24) 4. Air cleaner (P . 8-20) 5. Engine oil filler cap (P . 8-10) 6. Engine oil dipstick (P . 8-10) 7. Brake fluid reservoir/Clutch fluid reservoir (M/T model) (P . 8-14) 8. Drive belt location (P .8-18) 9. Radiator cap (P ...
-
Nissan Frontier (2013) - page 16
VQ40DE engine 1. Windshield-washer fluid reservoir (P . 8-15) 2. Fuse/fusible link box (P . 8-24) 3. Fuse and relay box (P . 8-24) 4. Engine oil filler cap (P . 8-10) 5. Engine oil dipstick (P . 8-10) 6. Brake fluid reservoir/Clutch fluid reservoir (M/T model) (P . 8-14) 7. Air cleaner (P . 8-20) 8. Drive belt location (P .8-18) 9. Radiator cap (P ...
-
Nissan Frontier (2013) - page 17
W arning light Name Page or Anti-lock Braking System (ABS) warning light 2-15 Automatic transmis- sion check warning light 2-15 Automatic transmis- sion oil temperature warning light (if so equipped) 2-15 Automatic transmis- sion park warning light ( model) 2-15 or Brake warning light 2-16 W arning light Name Page Charge warning light 2-16 Door ope ...
-
Nissan Frontier (2013) - page 18
Indicator light Name Page Electronic locking rear differential (E-Lock) system on indicator light (if so equipped) 2-20 4WD shift indicator light ( model) 2-21 Front passenger air bag status light 2-21 High beam indicator light (blue) 2-21 Hill descent control system on indicator light (if so equipped) 2-34 Malfunction Indica- tor Light (MIL) 2-21 ...
-
Nissan Frontier (2013) - page 19
1 Safety—Seats, seat belts and supplemental restraint system Seats . ...........................................1 - 2 Front manual seat adjustment (if so equipped) ................................1 - 2 Front power seat adjustment (if so equipped for Crew cab models) .............1 - 4 Jump seat (King cab) ...........................1 - 6 Armrest ...
-
Nissan Frontier (2013) - page 20
Installing top tether strap (Jump seat – King cab models only) ............. 1-57 Installing top tether strap (Rear bench seat – Crew cab models only) ....... 1-57 Booster seats ................................. 1-58 Supplemental restraint system ..................... 1-63 Precautions on supplemental restraint system ........................... ...
-
Nissan Frontier (2013) - page 21
WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the lap belt and receive serious internal injuries. ● For the most effective protecti ...
-
Nissan Frontier (2013) - page 22
Forward and backward Pull the lever up and hold it while you slide the seat forward or backward to the desired position. Release the lever to lock the seat in position. Reclining T o recline the seatback, pull the lever up and lean back. T o bring the seatback forward, pull the lever up and lean your body forward. Release the lever to lock the seat ...
-
Nissan Frontier (2013) - page 23
Lumbar support (if so equipped for driver’s seat) The lumbar support feature provides lower back support to the driver. Move the lever forward or backward to adjust the seat lumbar area. FRONT POWER SEA T ADJUSTMENT (if so equipped for Crew cab models) Operating tips ● The power seat motor has an auto-reset overload protection circuit. If the m ...
-
Nissan Frontier (2013) - page 24
The reclining feature allows adjustment of the seatback for occupants of different sizes for added comfort and to help obtain proper seat belt fit (see “Precautions on seat belt usage” later in this section) . Also, the seatback can be re- clined to allow occupants to rest when the ve- hicle is stopped and the transmission is in P (Park) or N ( ...
-
Nissan Frontier (2013) - page 25
JUMP SEA T (King cab) WARNING ● Do not use a child restraint in the driv- er’s side jump seat. This seating posi- tion is not suitable for child restraint installation. A child restraint can be in- stalled in the passenger’s side jump seat when the seat extension is un- folded from the seat base. ● When folding the jump seat, be careful not ...
-
Nissan Frontier (2013) - page 26
The illustration shows the seating positions equipped with head restraints. The first row head restraints are adjustable. 䉱 Indicates the seating position is equipped with a head restraint. Components 1. Head restraint 2. Adjustment notches 3. Lock knob 4. Stalks Adjustment Adjust the head restraint so the center is level with the center of the s ...
-
Nissan Frontier (2013) - page 27
T o raise the head restraint, pull it up. T o lower, push and hold the lock knob and push the head restraint down. Removal Use the following procedure to remove the ad- justable head restraints. 1. Pull the head restraint up to the highest position. 2. Push and hold the lock knob. 3. Remove the head restraint from the seat. 4. Store the head restra ...
-
Nissan Frontier (2013) - page 28
Install 1. Align the head restraint stalks with the holes in the seat. Make sure the head restraint is facing the correct direction. The stalk with the adjustment notches 䊊 1 must be installed in the hole with the lock knob 䊊 2 . 2. Push and hold the lock knob and push the head restraint down. 3. Properly adjust the head restraint before an occ ...
-
Nissan Frontier (2013) - page 29
The illustration shows the seating positions equipped with head restraints. The second row head restraints are removable but not adjustable. 䉱 Indicates the seating position is equipped with a head restraint. + Indicates the seating position is not equipped with a head restraint or adjustable headrest. Components 1. Head restraint 2. Lock knobs 3 ...
-
Nissan Frontier (2013) - page 30
Install 1. Align the head restraint stalks with the holes in the seat. Make sure the head restraint is facing the correct direction. 2. Push the head restraint down until it locks in place. FLEXIBLE SEA TING WARNING ● Never allow anyone to ride in the cargo area or on the rear seats when they are in the fold-down position. In a collision, people ...
-
Nissan Frontier (2013) - page 31
Folding the front passenger’s seatback flat (if so equipped) T o fold the front passenger’s seatback flat for extra storage length when transporting long items: 䊊 1 Slide the seat to the rearmost position. Lift up on the recline lever, located on the out- side edge of the seat, and fold the seatback forward as far as it will go. Then lift up ...
-
Nissan Frontier (2013) - page 32
Folding the rear bench seat T o fold the rear bench seat up: 䊊 1 Lift up on the lever, located on the side of the seat, while lifting the front of the seat cushion up. 䊊 2 Fold the bottom of the seat cushion toward the back of the vehicle until it locks in place. 䊊 3 Repeat this process to raise and secure the seat cushion on the other side o ...
-
Nissan Frontier (2013) - page 33
WARNING ● When the vehicle is being used to carry cargo, properly secure all cargo to help prevent it from sliding or shifting. Do not place cargo higher than the seat- backs. In a sudden stop or collision, unsecured cargo could cause personal injury. ● Do not allow people to ride in any area of your vehicle that is not equipped with seats and ...
-
Nissan Frontier (2013) - page 34
PRECAUTIONS ON SEA T BEL T USAGE If you are wearing your seat belt properly ad- justed and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced. NISSAN strongly encourages you and all of your passengers to buckle up ...
-
Nissan Frontier (2013) - page 35
WARNING ● Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly re- strained in the rear seat and, if appro- priate, in a child restraint. WARNING ● The seat belt should be properly ad- justed to a snug fit. Failure to do so may reduce the effectiveness of the entire restraint system a ...
-
Nissan Frontier (2013) - page 36
WARNING ● Always route the shoulder belt over your shoulder and across your chest. Never put the belt behind your back, under your arm or across your neck. The belt should be away from your face and neck, but not falling off your shoulder. ● Position the lap belt as low and snug as possible AROUND THE HIPS, NO T THE WAIST . A lap belt worn too ...
-
Nissan Frontier (2013) - page 37
PREGNANT WOMEN NISSAN recommends that pregnant women use seat belts. The seat belt should be worn snug and always position the lap belt as low as possible around the hips, not the waist. Place the shoulder belt over your shoulder and across your chest. Never run the lap/shoulder belt over your ab- dominal area. Contact your doctor for specific reco ...
-
Nissan Frontier (2013) - page 38
䊊 2 Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage. ● The retractor is designed to lock dur- ing a sudden stop or on impact. A slow pulling motion permits the seat belt to move, and allows you some freedom of movement in the seat. ● If the seat belt cannot be pulle ...
-
Nissan Frontier (2013) - page 39
WARNING When fastening the seat belts, be certain that the seatbacks are completely se- cured in the latched position. If they are not completely secured, passengers may be injured in an accident or sudden stop. Fastening the seat belts (Jump seats King cab models) 1. Open the jump seat. See “Seats” earlier in this section. 䊊 2 Slowly pull th ...
-
Nissan Frontier (2013) - page 40
䊊 3 P osition the lap belt portion low and snug on the hips as shown. 䊊 4 Pull the shoulder belt portion toward the retractor to take up extra slack. Be sure the shoulder belt is routed over your shoulder and across your chest. The jump seat position’s three-point seat belts have two modes of operation: ● Emergency Locking Retractor (ELR) ? ...
-
Nissan Frontier (2013) - page 41
T o increase your confidence in the seat belts, check the operation as follows: ● Grasp the shoulder belt and pull forward quickly . The retractor should lock and re- strict further belt movement. If the retractor does not lock during this check or if you have any questions about seat belt opera- tion, see a NISSAN dealer. Shoulder belt height ad ...
-
Nissan Frontier (2013) - page 42
● Adults and children who can use the standard seat belt should not use an extender. Such unnecessary use could result in serious personal injury in the event of an accident. ● Never use seat belt extenders to install child restraints. If the child restraint is not secured properly, the child could be seriously injured in a collision or a sud- ...
-
Nissan Frontier (2013) - page 43
A child restraint may be secured in the vehicle by using either the LA T CH (Lower Anchor and T eth- ers for CHildren) system or with the vehicle seat belt. See “Child restraints” section for more infor- mation. NISSAN recommends that all pre-teens and children be restrained in the rear seat if available (Crew Cab models) . Studies show that ch ...
-
Nissan Frontier (2013) - page 44
PRECAUTIONS ON CHILD RESTRAINTS WARNING ● Failure to follow the warnings and in- structions for proper use and installa- tion of child restraints could result in serious injury or death of a child or other passengers in a sudden stop or collision: – Do not install rear-facing child re- straints in the driver’s side rear seat- ing position. ? ...
-
Nissan Frontier (2013) - page 45
– Even with the NISSAN Advanced Air Bag System, never install a rear- facing child restraint in the front seat. An inflating air bag could seri- ously injure or kill a child. A rear- facing child restraint must only be used in the rear seat. – Be sure to purchase a child restraint that will fit the child and vehicle. Some child restraints may n ...
-
Nissan Frontier (2013) - page 46
LA T CH (Lower Anchors and T ethers for CHildren) S Y STEM Y our vehicle is equipped with special anchor points that are used with LA T CH (Lower Anchors and T ethers for CHildren) system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system. With this system, you do not have to use a vehicle sea ...
-
Nissan Frontier (2013) - page 47
LA T CH lower anchor location The LA T CH lower anchors are located at the rear of the seat cushion near the seatback. A label is attached to the seatback (Crew cab models only) to help you locate the LA T CH lower anchors. Installing child restraint LA T CH lower anchor attachments LA T CH compatible child restraints include two rigid or webbing-m ...
-
Nissan Frontier (2013) - page 48
When installing a child restraint, carefully read and follow the instructions in this manual and those supplied with the child restraint. T op tether anchor WARNING Do not allow cargo to contact the top tether strap when it is attached to the top tether anchor. Properly secure the cargo so it does not contact the top tether strap. Cargo that is not ...
-
Nissan Frontier (2013) - page 49
● Under the rear window behind the rear bench seat (Crew cab only) as shown. ● On the floor between the jump seat belt buckles in the center of the vehicle (King cab only) as shown. The anchor point 䊊 3 is located on the floor be- tween the jump seat belt buckles in the center of the vehicle. The routing bracket 䊊 2 is located behind the co ...
-
Nissan Frontier (2013) - page 50
2. Secure the child restraint anchor attach- ments to the LA T CH lower anchors. Check to make sure the LA T CH attachment is prop- erly attached to the lower anchors. 3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the cente ...
-
Nissan Frontier (2013) - page 51
4. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the LA T CH attachment path. The child re- straint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the LA T CH at- tachment holds the restraint ...
-
Nissan Frontier (2013) - page 52
WARNING ● The three-point seat belt with Auto- matic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured. The restraint could tip over or be loose and cause injury to a child in a sudden stop or collision. Also, it can change the operatio ...
-
Nissan Frontier (2013) - page 53
Refer to all W arnings and Cautions in the “Child Safety” and “Child Restraint” sections before in- stalling a child restraint. Follow these steps to install a child restraint on the jump seat. 1. T o access the jump seat extension (passen- ger’s side only) 䊊 1 on the jump seat, pull up 䊊 2 on the extension to unfold it to the open po ...
-
Nissan Frontier (2013) - page 54
4. Secure the child restraint anchor attach- ments to the LA T CH lower anchors. Check to make sure the LA T CH attachment is prop- erly attached to the lower anchors. 5. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the cente ...
-
Nissan Frontier (2013) - page 55
6. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the LA T CH attachment path. The child re- straint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the LA T CH at- tachment holds the restraint ...
-
Nissan Frontier (2013) - page 56
WARNING The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured. The restraint could tip over or be loose and cause injury to a child in a sudden stop or collision. Also, it can change the opera- tion of ...
-
Nissan Frontier (2013) - page 57
3. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode) . It reverts to the Emergency Locking Retractor (ELR) mode when the seat belt is fully retracted. 4. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slac ...
-
Nissan Frontier (2013) - page 58
6. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the belt holds the restraint in place. If the restraint ...
-
Nissan Frontier (2013) - page 59
WARNING ● The three-point seat belt with Auto- matic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured. The restraint could tip over or be loose and cause injury to a child in a sudden stop or collision. Also, it can change the operatio ...
-
Nissan Frontier (2013) - page 60
Refer to all W arnings and Cautions in the “Child Safety” and “Child Restraint” sections before in- stalling a child restraint. Follow these steps to install a child restraint on the passenger’s side jump seat. 1. T o access the jump seat extension 䊊 1 on the passenger’s side jump seat, pull up 䊊 2 on the extension to unfold it to t ...
-
Nissan Frontier (2013) - page 61
䊊 3 Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restraint manu- facturer’s instructions for belt routing. 䊊 4 Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking ...
-
Nissan Frontier (2013) - page 62
6. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint to compress the vehicle seat cushion and seatback while pulling up on the seat belt. 7. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the seat near the ...
-
Nissan Frontier (2013) - page 63
2. Secure the child restraint anchor attach- ments to the LA T CH lower anchors. Check to make sure the LA T CH attachment is prop- erly attached to the lower anchors. If the child restraint is equipped with a top tether strap, route the top tether strap and secure the tether strap to the tether anchor point. See “Installing top tether strap” i ...
-
Nissan Frontier (2013) - page 64
6. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the LA T CH attachment path. The child re- straint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the LA T CH at- tachment holds the restraint ...
-
Nissan Frontier (2013) - page 65
– For forward-facing child seats and boosters, DO NO T install if the child restraint base extends past the for- ward edge of the driver’s side seat cushion. Refer to all W arnings and Cautions in the “Child Safety” and “Child Restraint” sections before in- stalling a child restraint. Follow these steps to install a child restraint on t ...
-
Nissan Frontier (2013) - page 66
2. P osition the child restraint on the seat. Al- ways follow the child restraint manufactur- er’s instructions. 3. Secure the child restraint anchor attach- ments to the LA T CH lower anchors. Check to make sure the LA T CH attachment is prop- erly attached to the lower anchors. If the child restraint is equipped with a top tether strap, route t ...
-
Nissan Frontier (2013) - page 67
5. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments. 6. Tighten the tether ...
-
Nissan Frontier (2013) - page 68
Refer to all W arnings and Cautions in the “Child Safety” and “Child Restraint” sections before in- stalling a child restraint. Follow these steps to install a forward-facing child restraint using the vehicle seat belt in the rear seats (Crew cab models only) or in the front passenger seat: 1. If you must install a child restraint in the fr ...
-
Nissan Frontier (2013) - page 69
4. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode) . It reverts to Emergency Locking Retractor (ELR) mode when the seat belt is fully retracted. 5. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in ...
-
Nissan Frontier (2013) - page 70
8. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the seat belt holds the restraint in place. If the restr ...
-
Nissan Frontier (2013) - page 71
FOW ARD-F ACING CHILD RESTRAINT INST ALLA TION USING THE SEA T BEL TS — FRONT P ASSENGER AND JUMP SEA TS (King cab models only) WARNING ● The three-point seat belt with Auto- matic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured. Th ...
-
Nissan Frontier (2013) - page 72
Refer to all W arnings and Cautions in the “Child Safety” and “Child Restraint” sections before in- stalling a child restraint. Follow these steps to install a forward-facing child restraint using the vehicle seat belt in the passenger’s side jump seat (King cab models only) or in the front passenger seat: 1. If you must install a child r ...
-
Nissan Frontier (2013) - page 73
If the seating position does not have an adjustable head restraint and it is interfering with the proper child restraint fit, try another seating position or a different child restraint. 4. Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restr ...
-
Nissan Frontier (2013) - page 74
6. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt. 7. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while pulling up on the seat belt. 8. Tighten the tether strap ac ...
-
Nissan Frontier (2013) - page 75
10. Check to make sure that the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 3 through 9. After the child restraint is removed and the seat belt is fully retracted, the ALR mode (child re- straint mode) is canceled. INST ALLING T OP TETHER STRAP (Front passenger seat – King cab models only) B ...
-
Nissan Frontier (2013) - page 76
INST ALLING T OP TETHER STRAP (Jump seat – King cab models only) WARNING Do not secure the top tether strap to the routing bracket. If the child restraint is not anchored properly, the risk of a child be- ing injured or killed in a collision or a sudden stop greatly increases. First, secure the child restraint with the seat belt. 1. Pull the cove ...
-
Nissan Frontier (2013) - page 77
Before securing the child restraint with the LA T CH lower anchors (rear outboard seating po- sitions only [crew cab models only] ) or the seat belt, as applicable, follow these steps. 1. If necessary , raise or remove the head re- straint to position the top tether strap 䊊 1 over the top of the seatback. If the head restraint is removed, store i ...
-
Nissan Frontier (2013) - page 78
Booster seats of various sizes are offered by several manufacturers. When selecting any booster seat, keep the following points in mind: ● Choose only a booster seat with a label certifying that it complies with Federal Motor V ehicle Safety Standard 213 or Canadian Motor V ehicle Safety Standard 213. ● Check the booster seat in your vehicle to ...
-
Nissan Frontier (2013) - page 79
● Make sure the child’s head will be properly supported by the booster seat or vehicle seat. The seatback must be at or above the center of the child’s ears. For example, if a low back booster seat 䊊 1 is chosen, the vehicle seatback must be at or above the center of the child’s ears. If the seatback is lower than the center of the child? ...
-
Nissan Frontier (2013) - page 80
3. The booster seat should be positioned on the vehicle seat so that it is stable. If necessary , adjust or remove the head re- straint to obtain the correct booster seat fit. If the head restraint is removed, store it in a secure place. Be sure to reinstall the head restraint when the booster seat is removed. See “Head restraints” in this sec- ...
-
Nissan Frontier (2013) - page 81
Booster seat installation — jump seats (King cab models only) WARNING ● A child restraint system will not be in- stalled properly and the child could be seriously injured or killed in a sudden stop or collision. – For boosters, DO NO T install if the child restraint system base extends past the forward edge of the seat cushion. – Do not ins ...
-
Nissan Frontier (2013) - page 82
2. P osition the booster seat on the seat. Only place it in a front-facing direction. Always follow the booster seat manufacturer’s in- structions. 3. The booster seat should be positioned on the vehicle seat so that it is stable. If necessary , adjust or remove the head re- straint to obtain the correct booster seat fit. If the head restraint is ...
-
Nissan Frontier (2013) - page 83
Roof-mounted curtain side-impact and rollover supplemental air bag system: This system can help cushion the impact force to the head of occupants in front and rear outboard seating positions in certain side impact or rollover collisions. In a side impact, the curtain and roll- over air bags are designed to inflate on the side where the vehicle is i ...
-
Nissan Frontier (2013) - page 84
● The driver and front passenger seat belt buckles are equipped with sensors that detect if the seat belts are fastened. The Advanced Air Bag System monitors the severity of a collision and seat belt us- age then inflates the air bags as needed. Failure to properly wear seat belts can increase the risk or severity of injury in an accident. ● Th ...
-
Nissan Frontier (2013) - page 85
WARNING ● Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations. WARNING ● Children may be severely injured or killed when the front air bags, side air bags or curtain and rollover air bags ...
-
Nissan Frontier (2013) - page 86
WARNING ● Even with the NISSAN Advanced Air Bag System, never install a rear-facing child restraint in the front seat. An in- flating front air bag could seriously in- jure or kill your child. See “Child re- straints” earlier in this section for details. ARS1044 ARS1045 WRS0256 Safety—Seats, seat belts and supplemental restraint system 1-67 ...
-
Nissan Frontier (2013) - page 87
WARNING Front seat-mounted side-impact supple- mental air bags and roof-mounted curtain side-impact and rollover supplemental air bags: ● The side air bags and curtain and roll- over air bags ordinarily will not inflate in the event of a frontal impact, rear im- pact, or lower severity side collision. Always wear your seat belts to help reduce th ...
-
Nissan Frontier (2013) - page 88
WARNING ● The seat belts, the side air bags and curtain and rollover air bags are most effective when you are sitting well back and upright in the seat. The side air bag and curtain and rollover air bag inflate with great force. Do not allow anyone to place their hand, leg or face near the side air bag on the side of the seatback of the front sea ...
-
Nissan Frontier (2013) - page 89
1. Roof-mounted curtain side-impact and rollover supplemental air bags 2. Roof-mounted curtain side-impact and rollover supplemental air bag inflators 3. Air bag Control Unit (ACU) 4. Supplemental front-impact air bag modules 5. Crash zone sensor 6. Occupant classification system control unit 7. Occupant classification sensor (pressure sensor) 8. S ...
-
Nissan Frontier (2013) - page 90
The driver supplemental front-impact air bag is located in the center of the steering wheel. The passenger supplemental front-impact air bag is mounted in the dashboard above the glove box. The front air bags are designed to inflate in higher severity frontal collisions, although they may in- flate if the forces in another type of collision are sim ...
-
Nissan Frontier (2013) - page 91
Front passenger air bag and status light WARNING The front passenger air bag is designed to automatically turn OFF under some con- ditions. Read this section carefully to learn how it operates. Proper use of the seat, seat belt and child restraints is nec- essary for most effective protection. Fail- ure to follow all instructions in this manual con ...
-
Nissan Frontier (2013) - page 92
classification sensor and the belt tension de- tected on the seat belt, the Advanced Air Bag System determines whether the front passenger air bag should be automatically turned OFF as required by the regulations. Front passenger seat adult occupants who are properly seated and using the seat belt as out- lined in this manual should not cause the p ...
-
Nissan Frontier (2013) - page 93
If a malfunction occurs in the front passenger air bag system, the supplemental air bag warning light , located in the meter and gauges area of the instrument panel, will blink. Have the sys- tem checked by a NISSAN dealer. Other supplemental front-impact air bag precautions WARNING ● Do not place any objects on the steer- ing wheel pad or on the ...
-
Nissan Frontier (2013) - page 94
Front seat-mounted side-impact supplemental air bag and roof- mounted curtain side-impact and rollover supplemental air bag systems The side air bags are located in the outside of the seatback of the front seats. The curtain and roll- over air bags are located in the side roof rails. These systems are designed to meet voluntary guidelines to help r ...
-
Nissan Frontier (2013) - page 95
WARNING ● Do not place any objects near the seat- back of the front seats. Also, do not place any objects (an umbrella, bag, etc .) between the front door finisher and the front seat. Such objects may become dangerous projectiles and cause injury if a side air bag inflates. ● Right after inflation, several side air bag and curtain and rollover ...
-
Nissan Frontier (2013) - page 96
● If you need to dispose of a pretensioner or scrap the vehicle, contact a NISSAN dealer. Incorrect disposal procedures could cause personal injury. The pretensioner system may activate with the supplemental air bag system in certain types of collisions. W orking with the seat belt retractor, the pretensioner helps tighten the seat belt when the ...
-
Nissan Frontier (2013) - page 97
SUPPLEMENT AL AIR BAG W ARNING LIGHT The supplemental air bag warning light, displaying in the instrument panel, moni- tors the circuits for the air bag systems, preten- sioners and all related wiring. When the ignition switch is placed in the ON or ST ART position, the supplemental air bag warn- ing light illuminates for about 7 seconds and then t ...
-
Nissan Frontier (2013) - page 98
MEMO Safety—Seats, seat belts and supplemental restraint system 1-79 ...
-
Nissan Frontier (2013) - page 99
2 Instruments and controls Instrument panel ...................................2 - 2 Meters and gauges ................................2 - 3 Speedometer and odometer . . ...................2 - 4 T achometer ....................................2 - 6 Engine coolant temperature gauge ...............2 - 6 Fuel gauge .................................... ...
-
Nissan Frontier (2013) - page 100
Glove box .................................... 2-42 Sunglasses holder (if so equipped) .............. 2-42 Map pockets .................................. 2-43 Seat pocket (if so equipped) .................... 2-44 Cup holders .................................. 2-44 Roof rack (if so equipped) ...................... 2-46 Windows ..................... ...
-
Nissan Frontier (2013) - page 101
1. V ents (P . 4-17) 2. Headlight/fog light (if so equipped)/turn signal switch (P . 2-28) 3. Steering wheel switch for audio control (if so equipped)/Bluetooth® Hands- Free Phone System (if so equipped) (P . 4-75, P . 4-70, 4-71) 4. Driver supplemental air bag/horn (P . 1-63, P . 2-32) 5. Meters, gauges and warning/indicator lights (P . 2-3, 2-14 ...
-
Nissan Frontier (2013) - page 102
15. Electronic locking rear differential (E-Lock) system switch (if so equipped) (P .2-35) Heated seat switch (if so equipped) (P . 2-33) Rear sonar switch (if so equipped) (P . 2-37) V ehicle Dynamic Control (VDC) OFF switch (P . 2-34) 16. Shift selector (P . 5-13, 5-18) 17. 4WD shift switch (if so equipped) (P . 5-26) 18. Climate controls (P . 4- ...
-
Nissan Frontier (2013) - page 103
1. Speedometer 2. Odometer/T win trip odometer 3. Change/Loose fuel cap warning mes- sage reset/Check tire pressure warning message reset button SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates vehicle speed. Odometer/T win trip odometer The odometer/twin trip odometer is displayed when the ignition switch is placed in the ON position ...
-
Nissan Frontier (2013) - page 104
For vehicles equipped with trip computer, press- ing the change button changes the display as follows: T rip → T rip → Distance to Empty → Average speed → Average fuel consumption → Journey time → T rip For additional information, refer to “T rip com- puter” later in this section. Resetting the trip odometer: Pushing the change butt ...
-
Nissan Frontier (2013) - page 105
long as the low tire pressure warning light re- mains illuminated. For more information see “Low tire pressure warning light” in the “Instruments and controls” section, “Tire Pressure Monitoring System (TPMS)” in the “Starting and driving” and “Wheels and tires” section in the “Maintenance and do-it-yourself” section of this ...
-
Nissan Frontier (2013) - page 106
CAUTION If the gauge indicates coolant tempera- ture near the hot (H) end of the normal range, reduce vehicle speed to decrease temperature. If the gauge is over the nor- mal range, stop the vehicle as soon as safely possible. If the engine is over- heated, continued operation of the ve- hicle may seriously damage the engine. See “If your vehicle ...
-
Nissan Frontier (2013) - page 107
ENGINE OIL PRESSURE GAUGE (if so equipped) The gauge indicates the engine lubrication sys- tem oil pressure while the engine is running. The needle should be in the middle of the gauge when the engine is running. CAUTION ● This gauge is not designed to indicate low engine oil level. Use the dipstick to check the oil level. (See “Engine oil” i ...
-
Nissan Frontier (2013) - page 108
TRIP COMPUTER (if so equipped) The display of the trip computer is situated in the speedometer display . When the ignition switch is placed in the ON position, the display scrolls all the modes of the trip computer and then shows the mode chosen before the ignition switch was placed in the OFF position. When the ignition switch is placed in the ON ...
-
Nissan Frontier (2013) - page 109
This unit has the following functions: ● Measures terrestrial magnetism and indi- cates heading direction of vehicle ● Indicates outside air temperature (if so equipped) With the ignition switch in the ON position, press the or button as described in the charts below to activate various features of the automatic anti-glare rearview mirror. T yp ...
-
Nissan Frontier (2013) - page 110
● When the outside temperature is between 140°F (60°C) and 194°F (90°C) , the display will read 140°F (60°C) . When the tempera- ture is above 194°F (90°C) , the display will read “SC” . ● When the outside temperature is between than -40°F (-40°C) and -60°F (-51°C) , the display will read -40°F (-40°C) . When the temperature i ...
-
Nissan Frontier (2013) - page 111
Zone variation change procedure The difference between magnetic north and geo- graphical north is known as variance. In some areas, this difference can sometimes be great enough to cause false compass readings. Follow these instructions to set the variance for your particular location if this happens: 1. Press and hold the button for about 11 secon ...
-
Nissan Frontier (2013) - page 112
1. With the display turned on, press and hold the button for about 13 seconds or the for about 10 seconds. The “C” icon in the compass display will illuminate. 2. Calibrate the compass by driving the vehicle in three complete circles at a maximum speed of 5 MPH (8 km/h). 3. After completing the circles, the display should return to normal. CAUT ...
-
Nissan Frontier (2013) - page 113
or Anti-lock Braking System (ABS) warning light Low tire pressure warning light High beam indicator light (blue) Automatic T ransmission check warning light Low windshield-washer fluid warning light (if so equipped) Hill descent control system on indicator light (if so equipped) Automatic transmission oil temperature warning light (if so equipped) ...
-
Nissan Frontier (2013) - page 114
CHECKING BULBS With all doors closed, apply the parking brake and turn the ignition key to the ON position without starting the engine. The following lights will come on: , or , , , , The following lights come on briefly and then go off: or , , , , , , , , If any light fails to come on, it may indicate an open circuit in the electrical system. Have ...
-
Nissan Frontier (2013) - page 115
● Shift the 4WD switch into the 2WD, 4H or 4LO position again to turn off the A TP warning light when the shift selector is in the P position and the A TP warning light is ON . (Before shifting the 4WD switch into the 4LO position, move the shift selector into the N position once, shift the shift selector into P again and make sure the A TP warni ...
-
Nissan Frontier (2013) - page 116
CAUTION ● Do not ground electrical accessories directly to the battery terminal. Doing so will bypass the variable control sys- tem and the vehicle battery may not charge completely. Refer to “V ariable voltage control system (if so equipped) ” in the “Maintenance and do-it- yourself” section later in this manual. ● Do not continue driv ...
-
Nissan Frontier (2013) - page 117
Low fuel warning light This light comes on when the fuel level in the fuel tank is getting low . Refuel as soon as it is conve- nient, preferably before the fuel gauge reaches E (Empty) . There will be a small reserve of fuel in the tank when the fuel gauge needle reaches E (Empty) . Low tire pressure warning light Y our vehicle is equipped with a ...
-
Nissan Frontier (2013) - page 118
WARNING ● If the light does not illuminate with the ignition switch placed in the ON posi- tion, have the vehicle checked by a NISSAN dealer as soon as possible. ● If the light illuminates while driving, avoid sudden steering maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as ...
-
Nissan Frontier (2013) - page 119
Supplemental air bag warning light When the ignition switch is in the ON or ST ART position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. If any of the following conditions occur, the front air bag, side air bag, curtain and rollover air bag, and pretensioner system ...
-
Nissan Frontier (2013) - page 120
4WD shift indicator light ( model) The light should turn off within 1 second after placing the ignition switch in the ON position. While the engine is running, the 4WD shift indi- cator light will illuminate the position selected by the 4WD shift switch. The 4WD shift indicator light may blink while shifting from one drive mode to the other. Front ...
-
Nissan Frontier (2013) - page 121
Operation The Malfunction Indicator Light will come on in one of two ways: ● Malfunction Indicator Light on steady — An emission control system malfunction has been detected. Check the fuel-filler cap if the L OOSE FUEL CAP warning message is displayed in the odometer. If the fuel-filler cap is loose or missing, tighten or install the cap and c ...
-
Nissan Frontier (2013) - page 122
Make sure the transfer 4L O position indicator light turns on when you shift the 4WD shift switch to 4L O. The indicator light may blink while shifting from one drive mode to the other. The 4L O indicator light must stop blinking and remain illuminated or turn off before shifting the transmission into gear. If the shift selector is shifted from the ...
-
Nissan Frontier (2013) - page 123
AUDIBLE REMINDERS Brake pad wear warning The disc brake pads have audible wear warnings. When a disc brake pad requires replacement, it makes a high pitched scraping sound when the vehicle is in motion, whether or not the brake pedal is depressed. Have the brakes checked as soon as possible if the warning sound is heard. K ey reminder chime A chime ...
-
Nissan Frontier (2013) - page 124
K eyfob operation: ● Push the button on the keyfob. All doors lock. The hazard lights flash twice and the horn beeps once to indicate all doors are locked. ● When the button is pushed with all doors locked, the hazard lights flash twice and the horn beeps once as a re- minder that the doors are already locked. The horn may or may not beep. Refe ...
-
Nissan Frontier (2013) - page 125
3. Repeat steps 1 and 2. 4. Restart the engine while holding the device (which may have caused the interference) separate from the registered key . If the no start condition re-occurs, NISSAN rec- ommends placing the registered key on a sepa- rate key ring to avoid interference from other devices. Statement related to Section 15 of FCC Rules for NI ...
-
Nissan Frontier (2013) - page 126
Push the lever up 䊊 4 to have one sweep opera- tion (MIST) of the wiper. Pull the lever toward you 䊊 5 to operate the washer. The wiper will also operate several times. WARNING In freezing temperatures the washer solu- tion may freeze on the windshield and obscure your vision which may lead to an accident. Warm the windshield with the defroster ...
-
Nissan Frontier (2013) - page 127
HEADLIGHT CONTROL SWIT CH Lighting 䊊 1 When turning the switch to the posi- tion, the front parking, tail, license plate and instrument panel lights come on. 䊊 2 When turning the switch to the posi- tion, the headlights come on and all the other lights remain on. CAUTION Use the headlights with the engine run- ning to avoid discharging the vehi ...
-
Nissan Frontier (2013) - page 128
Autolight system (if so equipped) The autolight system allows the headlights to be set so they turn on and off automatically . The autolight system can: ● T urn on the headlights, front parking, tail, license plate and instrument panel lights au- tomatically when it is dark. ● T urn off all the lights when it is light. ● K eep all the lights ...
-
Nissan Frontier (2013) - page 129
Be sure you do not put anything on top of the autolight sensor 䊊 1 located in the top side of the instrument panel. The autolight sensor controls the autolight ; if it is cov- ered, the autolight sensor reacts as if it is dark out and the headlights will illuminate. If this occurs while parked with the engine off and the switch in the ON position ...
-
Nissan Frontier (2013) - page 130
If the parking brake is applied before the engine is started, the daytime running lights do not illumi- nate. The daytime running lights illuminate when the parking brake is released. The daytime run- ning lights will remain on until the ignition switch is placed in the OFF position. WARNING When the daytime running light system is active, tail lig ...
-
Nissan Frontier (2013) - page 131
FOG LIGHT SWIT CH (if so equipped) T o turn the fog lights on, turn the headlight switch to the position, then turn the fog light switch to the position. T o turn the fog lights on with the headlight switch in the AUT O position (if so equipped) , the head- lights must be on, then turn the fog light switch to the position. T o turn the fog lights o ...
-
Nissan Frontier (2013) - page 132
The front seats are warmed by built-in heaters. 1. Start the engine. 2. Push the L O or HI position of the switch, as desired, depending on the temperature. The indicator light in the switch will illuminate. The heater is controlled by a thermostat, automatically turning the heater on and off. The indicator light will remain on as long as the switc ...
-
Nissan Frontier (2013) - page 133
The vehicle should be driven with the V ehicle Dynamic Control (VDC) system on for most driv- ing conditions. If the vehicle is stuck in mud or snow , the VDC system reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depressed to the floor. If maximum engine power is needed to free a stuck ve ...
-
Nissan Frontier (2013) - page 134
● the 4WD switch must be in the 4H position and the vehicle speed must be under 21 MPH (35 km/h), and ● the hill descent control system switch must be ON. The hill descent control system on indicator light will come on when the system is activated. Also, the stop/tail lights illuminate while the hill descent control system applies the brakes to ...
-
Nissan Frontier (2013) - page 135
● Use the E-Lock system only when free- ing a stuck vehicle. T ry the 4LO position before using the E-Lock system. Never use the E-Lock system on a slippery road surface such as snow or ice sur- face. Using the E-Lock system when driving in these road conditions may cause unexpected movement of the ve- hicle during engine braking, accelerat- ing ...
-
Nissan Frontier (2013) - page 136
WARNING The rear sonar system is a convenience but it is not a substitute for proper back - ing. Always turn and check that it is safe to do so before backing up. Always back up slowly. The rear sonar system (if so equipped) is active when the ignition switch is placed in the ON position and the shift selector is in R (Reverse) . When sensors detec ...
-
Nissan Frontier (2013) - page 137
CAUTION ● The outlet and plug may be hot during or immediately after use. ● Only certain power outlets are designed for use with a cigarette lighter unit. Do not use any other power outlet for an accessory lighter. See your NISSAN dealer for additional information. ● Do not use with accessories that ex - ceed a 12 volt, 120W (10A) power draw. ...
-
Nissan Frontier (2013) - page 138
A/T model LIC0818 M/T model — T ype A (if so equipped) WIC1431 M/T model — T ype B (if so equipped) WIC1432 Instruments and controls 2-39 ...
-
Nissan Frontier (2013) - page 139
UNDER-SEA T ST ORAGE BINS WARNING ● Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. In a sudden stop or collision, unsecured cargo could cause personal injury. ● The cargo restrained in the under-seat storage bins must not exceed the weight limits listed below or the bins may not stay secured. In a su ...
-
Nissan Frontier (2013) - page 140
● Do not place sharp objects in the under- seat storage bins. Such objects may become dangerous projectiles and cause injury when the vehicle is moving or if the vehicle is involved in a collision. T o access the under-seat storage bins: For King cab model, lift up the jump seat. Refer to “Jump seat (King cab)” in the “Safety—Seats, seat ...
-
Nissan Frontier (2013) - page 141
GL OVE BOX T o open the top portion of the glove box, push the latch 䊊 A up and raise the lid. T o open the lower portion of the glove box, pull the handle 䊊 B down and lower the lid. WARNING Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop. SUNGLASSES HOLDER (if so equipped) T o open the sunglasses ...
-
Nissan Frontier (2013) - page 142
MAP POCKETS WIC0824 King cab model LIC0826 Crew cab model LIC0825 Instruments and controls 2-43 ...
-
Nissan Frontier (2013) - page 143
SEA T POCKET (if so equipped) A pocket is located on the back of the driver’s seat. CUP HOLDERS The front cup holders have adapters that can be removed to accommodate larger cups. WARNING The cup holder should not be used while driving so full attention may be given to vehicle operation. CAUTION ● Avoid abrupt starting and braking when the cup ...
-
Nissan Frontier (2013) - page 144
T o open the 2nd row cup holders (rear of the front console) , lower the lid. T o close, raise the lid. If stepped on, the cup holder is designed to snap loose from the console. T o re-install, close the cup holder assembly and push it back into the console opening. T o fold the 2nd row bench seat back, first close the cup holder. CAUTION ● Do no ...
-
Nissan Frontier (2013) - page 145
ROOF RACK (if so equipped) WARNING ● Drive extra carefully when the vehicle is loaded at or near the cargo carrying capacity, especially if the significant portion of that load is carried on the roof rack. ● Heavy loading of the roof rack has the potential to affect the vehicle stability and handling during sudden or abnor- mal handling maneuve ...
-
Nissan Frontier (2013) - page 146
Always evenly distribute the cargo on the tubular roof rack. The maximum total load is 125 lb (56 kg) evenly distributed. Be careful that your vehicle does not exceed the Gross V ehicle W eight Rating (GVWR) or the Gross Axle W eight Ratings (GA WR front and rear) . The GVWR and GA WR are located on the F .M.V .S.S. label (located on the driver’s ...
-
Nissan Frontier (2013) - page 147
1. Window lock button 2. P ower door lock switch 3. Front passenger side window switch 4. Right rear passenger window switch (Crew Cab models only) 5. Left rear passenger window switch (Crew Cab models only) 6. Driver’s side automatic switch Driver’s side power window switch The driver’s side control panel is equipped with switches to open or ...
-
Nissan Frontier (2013) - page 148
Rear power window switch (Crew Cab models only) The rear power window switches open or close only the corresponding passenger window . T o open the window , push the switch and hold it down 䊊 1 . T o close the window, push the switch up 䊊 2 . Locking passengers’ windows When the window lock button is depressed, only the driver’s side window ...
-
Nissan Frontier (2013) - page 149
REAR SLIDING WINDOW (if so equipped) Squeeze the handles of the lever 䊊 1 , then slide the window open 䊊 2 . Sliding the moonroof T o fully open the moonroof, push the switch to- ward DOWN/OPEN 䊊 1 . T o fully close the moonroof, push the switch toward UP/CL OSE 䊊 2 . T o open or close the moonroof part way, push the switch in any direction ...
-
Nissan Frontier (2013) - page 150
Auto-reverse function (when closing or tilting down the moonroof) The auto-reverse function can be activated when the moonroof is closed or tilted down by auto- matic operation when the ignition switch is placed in the ON position or for a period of time after the ignition switch is placed in the OFF position. Depending on the environment or drivin ...
-
Nissan Frontier (2013) - page 151
T ype A LIC0789 T ype B LIC0792 T ype C LIC0630 2-52 Instruments and controls ...
-
Nissan Frontier (2013) - page 152
The interior lights have a three-position switch and operate regardless of ignition switch posi- tion. When the switch is in the ON position 䊊 1 , the interior lights illuminate, regardless of door posi- tion. The lights will go off after a period of time unless the ignition switch is in the ON position. When the switch is in the O (DOOR) positio ...
-
Nissan Frontier (2013) - page 153
The HomeLink® Universal T ransceiver provides a convenient way to consolidate the functions of up to three individual hand-held transmitters into one built-in device. HomeLink® Universal T ransceiver: ● Will operate most Radio Frequency (RF) devices such as garage doors, gates, home and office lighting, entry door locks and se- curity systems. ...
-
Nissan Frontier (2013) - page 154
2. Using both hands, simultaneously press and hold the desired HomeLink® button and handheld transmitter button. DO NO T re- lease until the HomeLink® indicator light 䊊 1 flashes slowly and then rapidly . When the indicator light flashes rapidly , both buttons may be released. (The rapid flashing indi- cates successful programming.) NO TE: Some ...
-
Nissan Frontier (2013) - page 155
PROGRAMMING HOMELINK® FOR CANADIAN CUST OMERS AND GA TE OPENERS Canadian radio-frequency laws require transmit- ter signals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLink® to pick up the signal during training. Similar to this Canadian law , some U.S. gate operators are designed to ...
-
Nissan Frontier (2013) - page 156
CLEARING THE PROGRAMMED INFORMA TION The following procedure clears the programmed information from both buttons. Individual buttons cannot be cleared. However, individual buttons can be reprogrammed, see “Reprogramming a single HomeLink® button” in this section. T o clear all programming: 1. Press and hold the two outer HomeLink® buttons unt ...
-
Nissan Frontier (2013) - page 157
MEMO 2-58 Instruments and controls ...
-
Nissan Frontier (2013) - page 158
3 Pre-driving checks and adjustments K e y s .............................................3 - 2 NISSAN vehicle immobilizer system keys (if so equipped) ................................3 - 2 Doors ............................................3 - 3 Locking with key ................................3 - 3 Locking with inside lock knob ................... ...
-
Nissan Frontier (2013) - page 159
1. T wo master keys (black) with transponder chip and chrome NISSAN brand symbol on one side. 2. T ransponder chip 3. K ey number plate A key number plate is supplied with your keys. Record the key number and keep the plate in a safe place (such as your wallet) , not in the ve- hicle. If you lose your keys, see a NISSAN dealer for duplicates by usi ...
-
Nissan Frontier (2013) - page 160
When the doors are locked using one of the following methods, the doors can not be opened using the inside or outside door handles. The doors must be unlocked to open the doors. WARNING ● Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent per ...
-
Nissan Frontier (2013) - page 161
L OCKING WITH INSIDE L OCK KNOB T o lock the door without the key, move the inside lock knob to the lock position 䊊 1 , then close the door. T o unlock the door without the key, move the inside lock knob to the unlock position 䊊 2 . L OCKING WITH POWER DOOR L OCK SWIT CH (if so equipped) T o lock all the doors without a key, push the door lock ...
-
Nissan Frontier (2013) - page 162
REAR DOORS (King Cab models) 1. Open the driver’s or passenger’s door. 2. From the outside, pull the door handle 䊊 A toward you. 3. Open the door to the desired position. AUT OMA TIC DOOR L OCKS (if so equipped) ● All doors lock automatically when the vehicle speed reaches 15 MPH (24 km/h). ● For automatic transmission models: All doors u ...
-
Nissan Frontier (2013) - page 163
The automatic unlock function can be de- activated or activated. T o deactivate or acti- vate the automatic door unlock system, perform the following procedure: 1. Close all doors. 2. Place the ignition switch in the ON position. 3. Within 20 seconds of performing Step 2, push and hold the power door lock switch to the position (UNL OCK) for more t ...
-
Nissan Frontier (2013) - page 164
As many as 5 keyfobs can be used with one vehicle. For information concerning the purchase and use of additional keyfobs, contact a NISSAN dealer. The keyfob will not function when: ● the battery is discharged ● the distance between the vehicle and the keyfob is over 33 ft (10 m) The panic alarm will not activate when the key is in the ignition ...
-
Nissan Frontier (2013) - page 165
● When the button is pressed with all doors locked, the hazard warning lights flash twice and the horn beeps once as a reminder that the doors are already locked. ● If a door is open and you press the button, the doors will lock but the horn will not beep and the hazard lights will not flash. The horn may or may not beep. Refer to “Silenc- in ...
-
Nissan Frontier (2013) - page 166
Opening windows (if so equipped) The keyfob allows you to open windows equipped with automatic operation. ● T o open the windows, press the but- ton on the keyfob for longer than 3 sec- onds after all doors are unlocked. The door windows will open while pressing the button on the keyfob. The door windows cannot be closed by using the keyfob. Usin ...
-
Nissan Frontier (2013) - page 167
Silencing the horn beep feature If desired, the horn beep feature can be deacti- vated using the keyfob. T o deactivate: Press and hold the and buttons for at least 2 seconds. The hazard warning lights will flash three times to confirm that the horn beep feature has been deactivated. T o activate: Press and hold the and buttons for at least 2 secon ...
-
Nissan Frontier (2013) - page 168
WARNING ● Make sure the hood is completely closed and latched before driving. Fail- ure to do so could cause the hood to fly open and result in an accident. ● If you see steam or smoke coming from the engine compartment, to avoid injury do not open the hood. FUEL -FILLER CAP WARNING ● Gasoline is extremely flammable and highly explosive under ...
-
Nissan Frontier (2013) - page 169
– Keep the pump nozzle in contact with the container while you are fill- ing it. – Use only approved portable fuel con- tainers for flammable liquid. CAUTION ● Do not use E-15 or E-85 fuel in your vehicle. For further information see the “Fuel Recommendation” in the “T echni- cal and consumer information” section of this manual. ● T ...
-
Nissan Frontier (2013) - page 170
Loose Fuel Cap warning message The L OOSE FUEL CAP warning message dis- plays in the odometer when the fuel-filler cap is not tightened correctly after the vehicle has been refueled. It may take a few driving trips for the message to be displayed. T o turn off the warning message, perform the following: 1. Remove and install the fuel-filler cap as ...
-
Nissan Frontier (2013) - page 171
䊊 1 T o block glare from the front, swing down the main sun visor. 䊊 2 T o block glare from the side, remove the main sun visor from the center mount and swing the visor to the side. 䊊 3 T o extend the sun visor, slide in or out as needed. CAUTION ● Do not store the sun visor before return- ing the extension to its original position. ● Do ...
-
Nissan Frontier (2013) - page 172
REARVIEW MIRROR (if so equipped) The night position 䊊 1 reduces glare from the headlights of vehicles behind you at night. Use the day position 䊊 2 when driving in daylight hours. WARNING Use the night position only when neces- sary, because it reduces rear view clarity. AUT OMA TIC ANTI-GLARE REARVIEW MIRROR (if so equipped) The inside mirror ...
-
Nissan Frontier (2013) - page 173
For information on HomeLink® Universal T rans- ceiver (if so equipped) operation, see the “HomeLink® Universal T ransceiver” in the “In- struments and controls” section of this manual. For more information about the compass 䊊 2 and compass features (if so equipped) , refer to “Compass display” in the “Instruments and con- trols” ...
-
Nissan Frontier (2013) - page 174
Electric control type (if so equipped) The outside mirror remote control will operate only when the ignition switch is placed in the ACC or ON position. Move the small switch 䊊 1 to select the right or left mirror. Adjust each mirror to the desired position using the large switch 䊊 2 . Heated mirrors (if so equipped) Some outside mirrors can be ...
-
Nissan Frontier (2013) - page 175
For proper truck box loading see “V ehicle loading information” in the “T echnical and consumer in- formation” section of this manual. WARNING ● It is extremely dangerous to ride in a cargo area inside a vehicle. In a colli- sion, people riding in these areas are more likely to be seriously injured or killed. ● Do not allow people to ri ...
-
Nissan Frontier (2013) - page 176
6. T ake the tailgate plug from the glove box and connect it to the tailgate wiring harness to avoid contamination which will lead to mal- function of the rear camera. 7. Remove the tailgate. See “Removing the tailgate” in this section. Removing the tailgate 1. Release the tailgate support cables. CAUTION ● The tailgate is heavy. T wo people ...
-
Nissan Frontier (2013) - page 177
Connecting the rear camera (if so equipped) Before closing the tailgate reconnect the rear camera by performing the following: 1. After attaching the rear tailgate to the truck, keep the tailgate open and check that the tailgate harness is not hanging below the tailgate. 2. Remove the connector bracket 䊊 2 from the sill by pressing the locking ta ...
-
Nissan Frontier (2013) - page 178
BED EXTENDER (if so equipped) CAUTION ● Do not overload the bed extender. Maximum load on the open tailgate is 890N (200 lbs) . ● Evenly distribute and properly secure all cargo. ● Do not use the bed extender or tailgate to secure cargo. P ositioning the bed extender T o use the bed extender in the inward position perform the following: 1. Ro ...
-
Nissan Frontier (2013) - page 179
NO TE: Use care when rotating extender, buckles may come in contact with the truck bed railing. Removing and installing the bed extender T o remove or install the bed extender perform the following: 1. Open the tailgate. 2. Rotate the bed extender into a vertical posi- tion and lift straight up (to remove) or lower straight down (to install) . T o ...
-
Nissan Frontier (2013) - page 180
4 Monitor, climate, audio, phone and voice recognition systems Control panel buttons — color screen with Navigation System (if so equipped) ..................4 - 4 How to use the touch screen ....................4 - 5 How to use the BACK button ....................4 - 7 How to use the MENU button ....................4 - 7 button ................. ...
-
Nissan Frontier (2013) - page 181
USB interface (models without Navigation System) (if so equipped) ....................... 4-61 USB interface (models with Navigation System) ...................................... 4-62 iP od®* player operation without Navigation System (if so equipped) ........................ 4-64 iP od®* player operation with Navigation System (if so equipped) ...
-
Nissan Frontier (2013) - page 182
Navigation System voice commands ............ 4-104 Audio system voice commands ................. 4-104 Information voice commands ................... 4-105 Help voice commands ........................ 4-105 T roubleshooting guide ........................ 4-106 ...
-
Nissan Frontier (2013) - page 183
WARNING ● Positioning of the heating or air condi- tioning controls and display controls should not be done while driving in or- der that full attention may be given to the driving operation. ● Do not disassemble or modify this sys- tem. If you do, it may result in accidents, fire, or electrical shock. ● Do not use this system if you notice a ...
-
Nissan Frontier (2013) - page 184
9. P ower button/VOL (volume) control knob 10. CAMERA button * For information regarding the Navigation system control buttons, refer to the separate Navigation System Owner’s Manual. ** For information regarding the Bluetooth® Hands-Free Phone System control button, see “Bluetooth® Hands-Free Phone System” in this section. When you use thi ...
-
Nissan Frontier (2013) - page 185
T ouch screen operation Selecting the item: T ouch an item to select. For example, to select the “ Audio” key, touch the “ Audio” key 䊊 1 on the screen. Adjusting the item: For screens where an item can be adjusted incre- mentally , such as when adjusting the bass and treble for the audio system, touch the “+” key 䊊 1 or the “ ⫺ ...
-
Nissan Frontier (2013) - page 186
Inputting characters: T ouch the letter key 䊊 1 . There are some options available when inputting characters. ● 123 / ABC: Changes the available character set to num- bers. ● Space: Inserts a space. ● Delete: Deletes the last inputted character with one touch. T ouch and hold the “Delete” key to delete all of the characters. ● OK: Com ...
-
Nissan Frontier (2013) - page 187
3. Select the desired item. Audio For audio setup, refer to “ Audio system” in this section. Navigation Refer to the separate Navigation System Own- er’s Manual for information regarding this item. Phone & Bluetooth For information regarding the Bluetooth® Hands-Free Phone System, see “Bluetooth® Hands-Free Phone System” in this sec ...
-
Nissan Frontier (2013) - page 188
Display: Select the “Display” key to adjust the appearance of the display . The following settings can be adjusted: Brightness The brightness of the display can be set to V ery Bright, Bright, Default, Dark or V ery Dark. T ouch the “Brightness” key to cycle through the options. Display Mode The display can be adjusted to fit the level of l ...
-
Nissan Frontier (2013) - page 189
Clock Mode Select the mode for the clock. “ Auto” uses the system’s GPS to automatically maintain the time. “Manual” allows you to set the clock using the “Set Clock Manually” key. “Time Zone” maintains the time based upon the zone selected when selecting the “Time Zone” key . Set Clock Manually When this setting is activated, ...
-
Nissan Frontier (2013) - page 190
System Beeps: Select the “System Beeps” key to toggle the system beep tones feature on or off. When acti- vated, a beep sound will be heard when a pop-up message appears on the screen or a button on the unit (such as the button) is pressed and held for two seconds. Reset all settings/memory: Select the “Reset All Settings/Memory” key to ret ...
-
Nissan Frontier (2013) - page 191
● When washing the vehicle with high- pressure water, be sure not to spray it around the camera. Otherwise, water may enter the camera unit causing wa- ter condensation on the lens, a mal- function, fire or an electric shock. ● Do not strike the camera. It is a preci- sion instrument. Otherwise, it may mal- function or cause damage resulting in ...
-
Nissan Frontier (2013) - page 192
DIFFERENCE BETWEEN PREDICTED AND ACTUAL DIST ANCES The distance guide line and the vehicle width guide line should be used as a reference only when the vehicle is on a level, paved surface. The distance viewed on the monitor is for reference only and may be different than the actual distance between the vehicle and displayed objects. Backing up on ...
-
Nissan Frontier (2013) - page 193
Backing up on a steep downhill When backing up the vehicle down a hill, the distance guide lines and the vehicle width guide lines are shown farther than the actual distance. For example, the display shows 3 ft (1.0 m) to the place 䊊 A , but the actual 3 ft (1.0 m) distance on the hill is the place 䊊 B . Note that any object on the hill is clos ...
-
Nissan Frontier (2013) - page 194
ADJUSTING THE SCREEN The procedure for adjusting the quality of the screen differs depending on the type of screen present on the vehicle. For vehicles without Navigation System: 1. Press the ENTER/SETTING button. 2. T urn the TUNE-SCROLL knob to highlight the “Brightness” or “Contrast” key . 3. Press the ENTER/SETTING button. 4. Adjust the ...
-
Nissan Frontier (2013) - page 195
OPERA TING TIPS CAUTION ● Do not use alcohol, benzine or thinner to clean the camera. This will cause discoloration. T o clean the camera, wipe with a cloth dampened with a di- luted mild cleaning agent and then wipe with a dry cloth. ● Do not damage the camera as the moni- tor screen may be adversely affected. ● When the shift selector is sh ...
-
Nissan Frontier (2013) - page 196
Adjust air flow direction for the driver’s and pas- senger’s side windows 䊊 1 , driver and passenger 䊊 2 , or center 䊊 3 vent by moving the vent slide and/or vent assemblies. WARNING ● The air conditioner cooling function op- erates only when the engine is running. ● Do not leave children or adults who would normally require the assis ...
-
Nissan Frontier (2013) - page 197
1. Fan control dial 2. T emperature control dial 3. Air flow control dial 4. Air conditioner button (if so equipped) 5. Air recirculation button CONTROLS Fan control dial The fan control dial turns the fan on and off, and controls fan speed. Air flow control dial The air flow control dial allows you to select the air flow outlets. MAX A/C — Air f ...
-
Nissan Frontier (2013) - page 198
OFF position: Push the air recirculation button again to turn air recirculation off. The indicator light on the button will turn off. Outside air is drawn into the passenger compartment and distributed through the selected outlet. Use the off position for normal heater or air con- ditioner operation. Air conditioner button (if so equipped) The butt ...
-
Nissan Frontier (2013) - page 199
● When the position is selected, the air conditioner automatically turns on (however, the indicator light will not illuminate) if the outside temperature is more than 36°F (2°C) . If the air flow control dial is in the position for more than one minute, the air conditioning system will continue to operate until the fan control dial is turned to ...
-
Nissan Frontier (2013) - page 200
The air conditioner cooling function oper- ates only when the engine is running. Cooling This mode is used to cool and dehumidify the air. 1. Push the button to the off position. 2. T urn the air flow control dial to the position. 3. T urn the fan control dial to the desired posi- tion. 4. Push the button. The indicator light comes on. 5. T urn the ...
-
Nissan Frontier (2013) - page 201
● If the engine coolant temperature gauge indicates engine coolant tem- perature over the normal range, turn the air conditioner off. See “If your vehicle overheats” in the “In case of emergency” section of this manual. AIR FL OW CHARTS The following charts show the button and dial positions for MAXIMUM AND QUICK heating, cooling or defro ...
-
Nissan Frontier (2013) - page 202
WHA1386 WHA1387 Monitor, climate, audio, phone and voice recognition systems 4-23 ...
-
Nissan Frontier (2013) - page 203
WHA1388 WHA1389 4-24 Monitor, climate, audio, phone and voice recognition systems ...
-
Nissan Frontier (2013) - page 204
WARNING ● The air conditioner cooling function op- erates only when the engine is running. ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot ...
-
Nissan Frontier (2013) - page 205
— Air flows from center and side vents. — Air flows from center and side vents and foot outlets. — Air flows mainly from foot outlets. — Air flows from defroster outlets and foot outlets. — Air flows mainly from defroster outlets. T emperature control dial The temperature control dial allows you to adjust the temperature of the outlet air ...
-
Nissan Frontier (2013) - page 206
4. T urn the temperature control dial to the de- sired position. Defrosting or defogging This mode directs the air to the defrost outlets to defrost/defog the windows. 1. Press the defrost/defog button . 2. T urn the fan control dial to the desired posi- tion. 3. T urn the temperature control dial to the de- sired position between the middle and th ...
-
Nissan Frontier (2013) - page 207
AIR CONDITIONER OPERA TION Start the engine, turn the fan control dial to the desired position, and press the button to activate the air conditioner. When the air condi- tioner is on, cooling and dehumidifying functions are added to the heater operation. The air conditioner cooling function oper- ates only when the engine is running. Cooling This m ...
-
Nissan Frontier (2013) - page 208
Operating tips ● K eep the windows closed while the air con- ditioner is in operation. ● After parking in the sun, drive for 2 or 3 min- utes with the windows open to vent hot air from the passenger compartment. Then, close the windows. This allows the air con- ditioner to cool the interior more quickly . ● The air conditioning system should ...
-
Nissan Frontier (2013) - page 209
LHA2059 LHA2060 4-30 Monitor, climate, audio, phone and voice recognition systems ...
-
Nissan Frontier (2013) - page 210
LHA2061 LHA2062 Monitor, climate, audio, phone and voice recognition systems 4-31 ...
-
Nissan Frontier (2013) - page 211
WHA1362 4-32 Monitor, climate, audio, phone and voice recognition systems ...
-
Nissan Frontier (2013) - page 212
1. Driver temperature control dial 2. A/C ON/OFF button 3. Front window defroster button 4. Fan speed control dial 5. (System OFF) button 6. Rear window defroster button 7. Air recirculation button 8. Passenger temperature control dial 9. DUAL button 10. Air flow control buttons 11. AUT O button WARNING ● The air conditioner cooling function op- ...
-
Nissan Frontier (2013) - page 213
● The temperature of the passenger compart- ment will be maintained automatically . Air flow distribution, fan speed and A/C on/off are also controlled automatically . ● A visible mist may be seen coming from the vents in hot, humid conditions as the air is cooled rapidly . This does not indicate a mal- function. Dehumidified defrosting or defo ...
-
Nissan Frontier (2013) - page 214
The sunload sensor 䊊 1 , located on the top center of the instrument panel, helps the system main- tain a constant temperature. Do not put anything on or around this sensor. The air conditioner system in your NISSAN ve- hicle is charged with a refrigerant designed with the environment in mind. This refrigerant does not harm the earth’s ozone la ...
-
Nissan Frontier (2013) - page 215
Reception conditions will constantly change be- cause of vehicle movement. Buildings, terrain, signal distance and interference from other ve- hicles can work against ideal reception. De- scribed below are some of the factors that can affect your radio reception. Some cellular phones or other devices may cause interference or a buzzing noise to com ...
-
Nissan Frontier (2013) - page 216
AUDIO OPERA TION PRECAUTIONS Compact disc (CD) player CAUTION ● Do not force a compact disc into the CD insert slot. This could damage the CD and/or CD player. ● T rying to load a CD with the CD door closed could damage the CD and/or CD player. ● Only one CD can be loaded into the CD player at a time. ● Only use high quality 4.7 in (12 cm) ...
-
Nissan Frontier (2013) - page 217
CHECK DISC: ● Confirm that the CD is inserted cor- rectly (the label side is facing up, etc .) . ● Confirm that the CD is not bent or warped and it is free of scratches. PRESS EJECT: This is an error due to excessive tem- perature inside the player. Remove the CD by pressing the EJECT button. After a short time, reinsert the CD. The CD can be p ...
-
Nissan Frontier (2013) - page 218
Playback order: Music playback order of a CD with MP3 or WMA files is as illustrated. ● The names of folders not containing MP3 or WMA files are not shown in the display . ● If there is a file in the top level of the disc, “Root Folder” is displayed. ● The playback order is the order in which the files were written by the writing software ...
-
Nissan Frontier (2013) - page 219
Specification chart : Supported media CD, CD-R, CD-RW Supported file systems ISO9660 LEVEL1, ISO9660 LEVEL2, Apple ISO, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. Supported versions*1 MP3 V ersion MPEG1, MPEG2, MPEG2.5 Sampling frequency 8 kHz - 48 kHz Bit rate 8 kbps - 320 kbps, VBR WMA V ersion WMA7, WMA8, WMA9 Sampling fr ...
-
Nissan Frontier (2013) - page 220
T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the disc was inserted correctly. Check if the disc is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, the CD player wil ...
-
Nissan Frontier (2013) - page 221
USB (Universal Serial Bus) memory (if so equipped) WARNING Do not connect or disconnect the USB device while driving. Doing so can be a distraction. If distracted you could lose control of your vehicle and cause an acci- dent or serious injury. CAUTION ● Do not force the USB device into the USB port. Inserting the USB device tilted or up-side-dow ...
-
Nissan Frontier (2013) - page 222
● During cold weather or rainy days, the player may malfunction due to humid- ity. If this occurs, remove the USB de- vice and dehumidify or ventilate the USB player completely. ● Do not connect a USB device if a con- nector, cable or USB port is wet. Allow the connector, cable, and USB port to dry completely before connecting the USB device. ( ...
-
Nissan Frontier (2013) - page 223
● Do not place the Bluetooth® audio device in an area surrounded by metal or far away from the in-vehicle Bluetooth® module to prevent tone quality degradation and wireless con- nection disruption. ● While an audio device is connected through the Bluetooth® wireless connection, the battery power of the device may discharge quicker than usual ...
-
Nissan Frontier (2013) - page 224
FM/AM RADIO WITH COMP ACT DISC (CD) PLA YER (if so equipped) For all operation precautions, see ⬙ Audio opera- tion precautions ⬙ in this section. Audio main operation Power button and VOL control knob Place the ignition switch in the ACC or ON position, then press the PWR (power) button. If you listen to the radio with the engine not running, ...
-
Nissan Frontier (2013) - page 225
Resetting the time Hold the MENU button down and then press the TUNE or SEEK button; the time will reset as follows: ● If the displayed minutes before the reset are in the range of :00 - :29, the hour displayed before the reset will stay the same and the minutes will be reset to :00. ● If the displayed minutes before the reset are in the range ...
-
Nissan Frontier (2013) - page 226
TUNE (rewind and fast forward) buttons: When the TUNE or button is pressed while the compact disc is playing, the compact disc plays at an increased speed while rewinding or fast forwarding. When the button is released, the compact disc returns to normal play speed. SEEK buttons: When is pressed while the compact disc is playing, the next track fol ...
-
Nissan Frontier (2013) - page 227
1. CD eject button 2. XM button* 3. CD insert slot 4. Display screen 5. SEEK button 6. SCAN button 7. CA T button 8. BACK button 9. iPod MENU button 10. TUNE/SCROLL knob, ENTER/SETTING button 11. AUX IN jack 12. Station select (1 - 6) buttons 13. RDM button 14. RPT button 15. DISP button 16. VOL (volume) knob / PWR (power) button 17. CD•AUX butto ...
-
Nissan Frontier (2013) - page 228
FM/AM/SA T RADIO WITH COMP ACT DISC (CD) PLA YER (T ype A) (if so equipped) For all operation precautions, see “ Audio opera- tion precautions” in this section. Audio main operation VOL (volume) knob / ON-OFF button: Place the ignition switch in the ACC or ON position and press the VOL (volume) knob / ON-OFF button while the system is off to ca ...
-
Nissan Frontier (2013) - page 229
Brightness and Contrast Adjust the brightness or contrast to adjust the appearance of the display screen. Clock Adjust Press the ENTER button to highlight the hours or minutes and then use the TUNE/SCROLL knob to adjust the value. Press the ENTER button again to set the value. On-Screen Clock Select “ON” or “OFF” to control whether or not t ...
-
Nissan Frontier (2013) - page 230
XM band select : Press the XM button to change the band as follows: XM1* → XM2* → XM3* → XM1 (satellite, if so equipped) When the XM button is pressed while the ignition switch is in the ACC or ON position, the radio will come on at the station last played. The last station played will also come on when the VOL/ON·OFF control knob is pressed ...
-
Nissan Frontier (2013) - page 231
SEEK/CA T (Reverse or Fast Forward) button: Press and hold the SEEK/CA T button or for 1.5 seconds while the compact disc is playing to reverse or fast forward the track being played. The compact disc plays at an in- creased speed while reversing or fast forwarding. When the button is released, the compact disc returns to normal play speed. SEEK/CA ...
-
Nissan Frontier (2013) - page 232
Press the CD•AUX button to play a compatible device plugged into the AUX IN jack. The CD•AUX button is also used to switch the audio system to a source plugged into the USB input jack in the center console. When a device is plugged into the AUX IN jack while another de- vice is plugged into the USB input jack, the CD•AUX button is used to tog ...
-
Nissan Frontier (2013) - page 233
1. CD eject button 2. FM-AM button 3. AUX button 4. CD insert slot 5. BACK button 6. TUNE knob / AUDIO button 7. Display screen 8. ON-OFF button / VOL (volume) 9. Backward seek button and Forward seek button 10. CD button 11. XM button* *No satellite radio reception is available when the XM button is pressed to access satellite radio stations unles ...
-
Nissan Frontier (2013) - page 234
This vehicle may be equipped with Speed Sen- sitive V olume. When this feature is active, the audio volume changes as the driving speed changes. Audio settings: 1. Press the MENU button. 2. Select the “Settings” key . 3. Select the “ Audio” key. Use the touchscreen to adjust the following items to the desired setting: Bass, T reble, Balance ...
-
Nissan Frontier (2013) - page 235
XM settings: T o view the XM settings: 1. Press the MENU button. 2. Select the “Settings” key . 3. Select the “XM” key . The signal strength, activation status and other information are displayed on the screen. FM/AM/SA T radio operation FM·AM button: Press the FM·AM button to change the band as follows: AM → FM1 → FM2 → AM If anoth ...
-
Nissan Frontier (2013) - page 236
While the radio is in XM mode, the operation can be controlled through the touchscreen. T ouch the “Channels” key to display a list of channels. T ouch a channel displayed on the list to change to that channel. T ouch the “Categories” key to display a list of categories. T ouch a category displayed on the list to display options within that ...
-
Nissan Frontier (2013) - page 237
1 to 6 Station memory operations: T welve stations can be set for the FM band (6 for FM1, 6 for FM2) and six stations can be set for the AM band. Eighteen stations can be set for the XM band (6 for XM1, 6 for XM2, 6 for XM3) . 1. Choose the radio band AM, FM1 or FM2 using the FM·AM select button or choose the radio band XM1, XM2 or XM3 using the X ...
-
Nissan Frontier (2013) - page 238
Random: T ouch the “Random” key to apply a random play pattern to the CD. When the random mode is active, the icon will be displayed to the left of the song title. If an MP3 CD is playing, touch- ing “Random” alternates between randomly play- ing songs within the current folder and songs from the CD as a whole. The icon is dis- played to th ...
-
Nissan Frontier (2013) - page 239
AUX button: The AUX IN audio input jack is located in the center console 䊊 1 and accepts any standard analog audio input such as from a portable cas- sette tape/CD player, MP3 player or a laptop computer. Press the AUX button to play a compatible device plugged into the AUX IN jack. EJECT button: When the button is pressed with a com- pact disc l ...
-
Nissan Frontier (2013) - page 240
USB INTERF ACE (models without Navigation System) (if so equipped) Connecting a device to the USB input jack CAUTION ● Depending on size and shape of USB device, the console lid may not fully close. Do not force console lid closed as this may damage USB device. ● Do not force the USB device into the USB port. Inserting the USB device tilted or ...
-
Nissan Frontier (2013) - page 241
Press the SEEK/CA T button while an au- dio file on the USB device is playing to advance one track. Press the SEEK/CA T button several times to skip forward several tracks. If the last track in a folder on the USB device is skipped, the first track of the next folder is played. RDM button: When the RDM button is pressed while an audio file on the U ...
-
Nissan Frontier (2013) - page 242
● Do not force the USB device into the USB port. Inserting the USB device tilted or up-side-down into the port may damage the USB device and the port. Make sure that the USB device is con- nected correctly into the USB port. (Some USB devices come with a mark as a guide. Make sure that the mark is facing the correct direction be- fore inserting t ...
-
Nissan Frontier (2013) - page 243
Press the button while an audio file on the USB device is playing to advance one track. Press the button several times to skip for- ward several tracks. If the last track in a folder on the USB device is skipped, the first track of the next folder is played. Random and repeat play mode: While files on a USB device are playing, the play pattern can ...
-
Nissan Frontier (2013) - page 244
T o disconnect the iPod® from the vehicle, re- move the USB end of the cable from the USB jack on the vehicle, then remove the cable from the iP od®. * iP od® is a trademark of Apple Inc., registered in the U.S. and other countries. Compatibility The following models are compatible: ● iP od® 5th Generation (firmware version 1.3 or later) ● ...
-
Nissan Frontier (2013) - page 245
● Songs ● P odcasts ● Genres ● Composers ● Audiobooks ● Shuffle songs For more information about each item, see the iP od® Owner’s Manual. SEEK/CA T buttons: Press the SEEK/CA T buttons or to skip backward or forward one track. Press and hold the SEEK/CA T buttons or for 1.5 seconds while a track is playing to reverse or fast forward ...
-
Nissan Frontier (2013) - page 246
● Do not force the iPod® cable into the USB port. Inserting the USB device tilted or up-side-down into the port may damage the iPod® cable and the port. Make sure that the iPod® cable is con- nected correctly into the USB port. (Some iPod® cables come with a mark as a guide. Make sure that the mark is facing the correct direction be- fore ins ...
-
Nissan Frontier (2013) - page 247
Audio main operation Place the ignition switch in the ACC or ON position. Press the AUX button repeatedly to switch to the iP od® mode. If the system has been turned off while the iP od® was playing, pressing the VOL/ON·OFF control knob will start the iP od®. AUX button: When the AUX button is pressed with the system off and the iP od® connect ...
-
Nissan Frontier (2013) - page 248
● Playlists ● Artists ● Albums ● Genres ● Songs ● Composers ● Audiobooks ● P odcasts Random and repeat play mode: While the iP od® is playing, the play pattern can be altered so that songs are repeated or played randomly . Random: T ouch the “Random” key to apply a random play pattern to the iP od®. When the random mode is act ...
-
Nissan Frontier (2013) - page 249
BLUET OO TH® STREAMING AUDIO WITHOUT NA VIGA TION S Y STEM (if so equipped) If you have a compatible Bluetooth® audio de- vice that is capable of playing audio files, the device can be connected to the vehicle’s audio system so that the audio files on the device play through the vehicle’s speakers. Connecting Bluetooth® audio T o connect you ...
-
Nissan Frontier (2013) - page 250
Audio main operation T o switch to the Bluetooth® audio mode, press the CD•AUX button repeatedly until the Bluetooth® audio mode is displayed on the screen. The controls for the Bluetooth® audio are dis- played on the screen. Use the Preset 3 button for play and the Preset 4 button for pause. BLUET OO TH® STREAMING AUDIO WITH NA VIGA TION S Y ...
-
Nissan Frontier (2013) - page 251
3. Select the “Phone & Bluetooth” key . 4. Select the “Connect New Device” key . 5. The system acknowledges the command and asks you to initiate connecting from the phone handset. The connecting procedure of the cellular phone varies according to each cellular phone model. See the cellular phone Owner’s Manual for details. Y ou can al ...
-
Nissan Frontier (2013) - page 252
Compatibility The following iPhone® models are compatible with the system: ● iPhone® 3GS ● iPhone® 4 ● iPhone® 4S The latest Pandora® application should be in- stalled on the phone. Audio main operation Models without Navigation System: T o switch to the Pandora® audio mode, press the CD-AUX button repeatedly until the Pan- dora® audio ...
-
Nissan Frontier (2013) - page 253
The controls for the Pandora® audio are dis- played on the screen. T ouch the keys on the screen to play or pause the audio. T ouch the key to select “thumbs up” or the key to select “thumbs down” . NO TE: There is a limit of six skips per station per hour. If a “ ” (thumbs down) is given after the skip limit has been reached, the curr ...
-
Nissan Frontier (2013) - page 254
● A new disc may be rough on the inner and outer edges. Remove the rough edges by rubbing the inner and outer edges with the side of a pen or pencil as illustrated. 1. V olume control switch 2. MODE select switch 3. T uning switch STEERING WHEEL SWIT CH FOR AUDIO CONTROL (if so equipped) The audio system can be operated using the controls on the ...
-
Nissan Frontier (2013) - page 255
XM (if so equipped) : ● Tilt up/down for less than 1.5 seconds to increase or decrease the preset station. ● Tilt up/down for more than 1.5 seconds to go to the next or previous category . ● Press the ENTER button to show the XM Menu. iPod® (if so equipped) : ● Tilt up/down for less than 1.5 seconds to increase or decrease the track number ...
-
Nissan Frontier (2013) - page 256
When installing a CB, ham radio or car phone in your vehicle, be sure to observe the following precautions; otherwise, the new equipment may adversely affect the engine control system and other electronic parts. WARNING ● A cellular phone should not be used for any purpose while driving so full atten- tion may be given to vehicle operation. Some ...
-
Nissan Frontier (2013) - page 257
Y our NISSAN is equipped with the Bluetooth® Hands-Free Phone System. If you have a com- patible Bluetooth® enabled cellular phone, you can set up the wireless connection between your cellular phone and the in-vehicle phone module. With Bluetooth® wireless technology , you can make or receive a hands-free telephone call with your cellular phone ...
-
Nissan Frontier (2013) - page 258
● Y ou will not be able to use a hands-free phone under the following conditions: – Y our vehicle is outside of the cellular ser- vice area. – Y our vehicle is in an area where it is difficult to receive a cellular signal; such as in a tunnel, in an underground parking garage, near a tall building or in a moun- tainous area. – Y our cellula ...
-
Nissan Frontier (2013) - page 259
Initialization When the ignition switch is placed in the ON position, NISSAN V oice Recognition is initialized, which takes a few seconds. If the button is pressed before the initialization completes, the system will announce “Hands-free phone system not ready” and will not react to voice commands. Operating tips T o get the best performance ou ...
-
Nissan Frontier (2013) - page 260
● Either “zero” or “oh” can be used for “0”. Example: 1-800-662-6200 – “One eight oh oh six six two six two oh oh” , or – “One eight zero zero six six two six two oh oh” ● W ords can be used for the first 4 digits places only . Example: 1-800-662-6200 – “One eight hundred six six two six two oh oh” , – NO T “On ...
-
Nissan Frontier (2013) - page 261
Y ou can also use the button to interrupt the system feedback and give a command at once. See “List of voice commands” and “During a call” in this section for more information. PHONE/END While the V oice Recognition sys- tem is active, press and hold the button for 5 seconds to quit the V oice Recognition system at any time. ENTER button / ...
-
Nissan Frontier (2013) - page 262
1. Press the button on the steering wheel. The system announces the available commands. 2. Say: “Connect phone” 䊊 A . The system ac- knowledges the command and announces the next set of available commands. 3. Say: “ Add phone” 䊊 B . The system acknowl- edges the command and asks you to initiate connecting from the phone handset 䊊 C . ...
-
Nissan Frontier (2013) - page 263
LIST OF VOICE COMMANDS Main Menu “Call” “Phonebook” “Recent Calls” “Connect Phone” “Help” When you press and release the button on the steering wheel, you can choose from the commands on the Main Menu. The following pages describe these commands and the com- mands in each sub-menu. Remember to wait for the tone before speaking. ...
-
Nissan Frontier (2013) - page 264
During a call During a call there are several command options available. Press the button on the steering wheel to mute the receiving voice and enter com- mands. ● “Help” — The system announces the avail- able commands. ● “Go back/Correction” — The system an- nounces “Go back,” ends the VR session and returns to the call. ● ? ...
-
Nissan Frontier (2013) - page 265
Also, if the name sounds too much like a name already stored, the system tells you, then prompts you for a name again. The system will ask you to transfer a phone number stored in the cellular phone’s memory . Enter a phone number by voice command: For example, say: “five five five one two one two.” See “How to say numbers” in this sectio ...
-
Nissan Frontier (2013) - page 266
NO TE: Each phone has its own separate phone- book. Y ou cannot access Phone A’s phone- book if you are currently connected with Phone B . “List Names” 䊊 A Use the List Names command to hear all the names and locations in the phone book. The system recites the phone book entries but does not include the actual phone numbers. When the playba ...
-
Nissan Frontier (2013) - page 267
“Select Phone” 䊊 B Use the Select Phone command to select from a list of phones connected to the vehicle. The sys- tem will list the names assigned to each phone and then prompt you for the phone you wish to select. Only one phone can be active at a time. “Delete Phone” 䊊 C Use the Delete Phone command to delete a phone that is connecte ...
-
Nissan Frontier (2013) - page 268
T raining phrases During the V A mode, the system instructs the trainer to say the following phrases. (The system will prompt you for each phrase.) ● phonebook transfer entry ● dial three oh four two nine ● delete call back number ● incoming ● transfer entry ● eight pause nine three two pause seven ● delete all entries ● call seven ...
-
Nissan Frontier (2013) - page 269
● T o select the current menu option, press the PHONE/SEND ( ) button. ● T o go back to the previous menu, press the PHONE/END ( ) button. If the current menu is the Main Menu, pressing the PHONE/END ( ) button will exit the Phone system. ● T o exit the manual control mode, press and hold the PHONE/END ( ) button for 5 seconds. TROUBLESHOO TI ...
-
Nissan Frontier (2013) - page 270
WARNING ● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. ● If you are unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop you ...
-
Nissan Frontier (2013) - page 271
phone module when the ignition switch is placed in the ON position with the connected cellular phone turned on and carried in the vehicle. Y ou can register up to 5 different Bluetooth® cellular phones to the in-vehicle phone module. However, you can talk on only one cellular phone at a time. NISSAN V oice Recognition system supports the phone com ...
-
Nissan Frontier (2013) - page 272
2. this device must accept any interference, including interference that may cause unde- sired operation of the device. IC Regulatory information – Operation is subject to the following two con- ditions: (1) this device may not cause interfer- ence, and (2) this device must accept any interference, including interference that may cause undesired ...
-
Nissan Frontier (2013) - page 273
3. Select the “Phone & Bluetooth” key . 4. Select the “Connect New Device” key . 5. Initiate the connecting process from the handset. The system will display the mes- sage: “Is PIN XXXXXX displayed on your Bluetooth device?” . If the PIN is displayed on your Bluetooth® device, select “Y es” to complete the connecting process. F ...
-
Nissan Frontier (2013) - page 274
3. Choose the desired entry from the displayed list. NO TE: T o scroll quickly through the list, touch the “ A-Z” key in the upper right corner of the screen. T urn the TUNE/SCROLL knob to choose a letter or number and then press ENTER. The list will move to the first entry that begins with that number or letter. 4. The number of the entry will ...
-
Nissan Frontier (2013) - page 275
RECEIVING A CALL When a call is placed to the connected phone, the display will change to phone mode. T o accept the incoming call, either: ● Press the button on the steering wheel, or ● T ouch the green phone icon on the screen. T o reject the incoming call, either: ● Press the button on the steering wheel, or ● T ouch the red phone icon o ...
-
Nissan Frontier (2013) - page 276
TEXT MESSAGING WARNING ● Use the text messaging feature after stopping your vehicle in a safe location. If you have to use the feature while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. ● If you are unable to devote full attention to vehicle operation while using the text messaging feature, ...
-
Nissan Frontier (2013) - page 277
Reading a received text message: 1. Press the button. 2. Say “Read T ext” . The text message, sender and delivery time are shown on the screen. Use the tuning switch to scroll through all text messages if more than one are available. Press the button to exit the text message screen. Press the button to access the following options for replying ...
-
Nissan Frontier (2013) - page 278
3. Select the “Phone & Bluetooth” key . ● Phone Settings See “Phone settings” in this section for more information. ● Connect New Device Select to connect a new Bluetooth® device to the Bluetooth® Hands-Free Phone Sys- tem. ● Select Connected Device Select to choose a Bluetooth® device from a list of those devices connected to ...
-
Nissan Frontier (2013) - page 279
PHONE SETTINGS T o access the phone settings: 1. Press the MENU button. 2. Select the “Settings” key . 3. Select the “Phone & Bluetooth” key . 4. Select the “Phone Settings” key and adjust the following settings as desired: ● Sort Phonebook By: Select “First Name” or “Last Name” to choose how phonebook entries are alpha- b ...
-
Nissan Frontier (2013) - page 280
The NISSAN V oice Recognition system allows hands-free operation of the systems equipped on this vehicle, such as the phone and navigation systems. T o operate NISSAN V oice Recognition, press the button located on the steering wheel. When prompted, speak the command for the system you wish to activate. The command given is picked up by the microph ...
-
Nissan Frontier (2013) - page 281
● The voice command screen can also be accessed using the control panel display: 1. Press the MENU button. 2. Select the “V oice Commands” key . Operating tips T o get the best performance out of NISSAN V oice Recognition, observe the following: ● K eep the interior of the vehicle as quiet as possible. Close the windows to eliminate the sur ...
-
Nissan Frontier (2013) - page 282
How to say numbers NISSAN V oice Recognition requires a certain way to speak numbers in voice commands. Refer to the following examples. General rule: Either “zero” or “oh” can be used for “0” . Phone numbers Speak phone numbers according to the following example. For 1-800-662-6200, say dial number and then speak the phone number in an ...
-
Nissan Frontier (2013) - page 283
● Redial Redials the last called number. ● Read T ext Reads an incoming text message. For more information about text messaging with the Bluetooth® Hands-Free Phone System, see “Bluetooth® Hands-Free Phone System with Navigation System” in this section. ● Send T ext Sends a text message. For more information about text messaging with th ...
-
Nissan Frontier (2013) - page 284
– Composers* – Audiobooks* – P odcasts* * Say “Next Page” to access these com- mands. Say “Previous Page” to return to the first page of commands. ● USB Switches the audio system to the USB mode. A USB device must be inserted for this command to be available and functional. ● Pandora® Switches the audio system to the Pandora® au ...
-
Nissan Frontier (2013) - page 285
TROUBLESHOO TING GUIDE The system should respond correctly to all voice commands without difficulty . If problems are en- countered, follow the solutions given in this guide for the appropriate error. Where the solutions are listed by number, try each solution in turn, starting with number one, until the problem is resolved. Symptom/error message S ...
-
Nissan Frontier (2013) - page 286
MEMO Monitor, climate, audio, phone and voice recognition systems 4-107 ...
-
Nissan Frontier (2013) - page 287
5 Starting and driving Precautions when starting and driving ................5 - 2 Exhaust gas (carbon monoxide) ..................5 - 2 Three-way catalyst ..............................5 - 3 Tire Pressure Monitoring System (TPMS) ..........5 - 3 On-pavement and off-road driving precautions ....................................5 - 6 Avoiding collisi ...
-
Nissan Frontier (2013) - page 288
Anti-freeze .................................... 5-41 Battery ....................................... 5-41 Draining of coolant water ....................... 5-41 Tire equipment ................................ 5-41 Special winter equipment ....................... 5-41 Driving on snow or ice ......................... 5-41 Engine block heater (if so ...
-
Nissan Frontier (2013) - page 289
WARNING ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to ca ...
-
Nissan Frontier (2013) - page 290
THREE-W A Y CA T AL Y ST The three-way catalyst is an emission control device installed in the exhaust system. Exhaust gases in the three-way catalyst are burned at high temperatures to help reduce pollutants. WARNING ● The exhaust gas and the exhaust sys- tem are very hot. Keep people, animals or flammable materials away from the exhaust system ...
-
Nissan Frontier (2013) - page 291
subsequent vehicle start-ups as long as the mal- function exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alter- nate tires or wheels on the vehicle that prevent the ...
-
Nissan Frontier (2013) - page 292
WARNING ● If the low tire pressure warning light illuminates while driving, avoid sudden steering maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as possible. Driving with under- inflated tires may permanently damage the tires and increase the likelihood of tire failure. Serious ...
-
Nissan Frontier (2013) - page 293
For Canada: This device complies with RSS-210 of In- dustry Canada. Operation is subject to the following two conditions: 1. This device may not cause interfer- ence, and 2. This device must accept any interfer- ence, include interference that may cause undesired operation of the de- vice. 3. The term “IC:” before the radio certifi- cation numb ...
-
Nissan Frontier (2013) - page 294
5. If there is nothing in the way , steer the ve- hicle to follow the road while vehicle speed is reduced. Do not attempt to drive the ve- hicle back onto the road surface until vehicle speed is reduced. 6. When it is safe to do so, gradually turn the steering wheel until both tires return to the road surface. When all tires are on the road surface ...
-
Nissan Frontier (2013) - page 295
NISSAN is committed to safe driving. However, you must choose not to drive under the influence of alcohol. Every year thousands of people are injured or killed in alcohol-related accidents. Al- though the local laws vary on what is considered to be legally intoxicated, the fact is that alcohol affects all people differently and most people underest ...
-
Nissan Frontier (2013) - page 296
● T o avoid raising the center of gravity excessively, do not exceed the rated capacity of the roof rack (if so equipped) and evenly distribute the load. Secure heavy loads in the cargo area as far forward and as low as pos- sible. Do not equip the vehicle with tires larger than specified in this manual. This could cause your vehicle to roll over ...
-
Nissan Frontier (2013) - page 297
WARNING ● Never remove the ignition key or place the ignition switch in the LOCK position while driving. The steering wheel will lock (for models with a steering lock mechanism) . This may cause the driver to lose control of the vehicle and could result in serious vehicle damage or per- sonal injury. AUT OMA TIC TRANSMISSION (if so equipped) The ...
-
Nissan Frontier (2013) - page 298
There is an OFF position between the LOCK and ON positions. The OFF position is indicated by a “1” on the ignition switch. When the ignition is in the OFF position, the steering wheel is not locked (for mod- els with a steering lock mechanism) . In order for the steering wheel to be locked, it must be turned about 1/8 of a turn clockwise from t ...
-
Nissan Frontier (2013) - page 299
NISSAN VEHICLE IMMOBILIZER S Y STEM (if so equipped) The NISSAN V ehicle Immobilizer System will not allow the engine to start without the use of the registered key . If the engine fails to start using a registered key (for example, when interference is caused by another registered key , an automated toll road device or automatic payment device on ...
-
Nissan Frontier (2013) - page 300
3. Crank the engine with your foot off the accelerator pedal by placing the ignition switch in the ST ART position. Release the key when the engine starts. If the engine starts, but fails to run, repeat the above procedure. ● If the engine is very hard to start in ex- tremely cold weather or when restarting, depress the accelerator pedal a little ...
-
Nissan Frontier (2013) - page 301
CAUTION ● Except in an emergency, do not shift to the N (Neutral) position while driving. Coasting with the transmission in the N (Neutral) position may cause serious damage to the transmission. ● When stopping the vehicle on an uphill grade, do not hold the vehicle by de- pressing the accelerator pedal. The foot brake should be used for this p ...
-
Nissan Frontier (2013) - page 302
WARNING Apply the parking brake if the shift selec- tor is in any position while the engine is not running. Failure to do so could cause the vehicle to move unexpectedly or roll away and result in serious personal injury or property damage. If the ignition switch is placed in the OFF position for any reason while the vehicle is in N (Neutral) , or ...
-
Nissan Frontier (2013) - page 303
1 (Low gear) : Use this position when climbing steep hills slowly or slow driving through deep snow , sand or mud, or for maximum engine braking on steep downhill grades. Do not downshift into the 1 position at speeds over the following and do not exceed the follow- ing speeds in the 1 position. 2WD: 37 MPH (60 km/h) 4H: 37 MPH (60 km/h) 4L O: 12 M ...
-
Nissan Frontier (2013) - page 304
WARNING If the shift selector cannot be moved from the P (Park) position while the engine is running and the brake pedal is depressed, the stop lights may not work. Malfunction- ing stop lights could cause an accident injuring yourself and others. Accelerator downshift — in D position — For passing or hill climbing, depress the accel- erator pe ...
-
Nissan Frontier (2013) - page 305
OFF: For driving up and down long slopes where engine braking is nec- essary push the Overdrive switch once. The O/D OFF indicator light in the instrument panel comes on at this time. When cruising at a low speed or climbing a gentle slope, you may feel uncomfortable shift shocks as the transmission shifts into and out of Overdrive repeatedly . In ...
-
Nissan Frontier (2013) - page 306
Start the vehicle in 1st gear and shift to 2nd, 3rd, 4th, 5th and 6th gear in sequence according to vehicle speed. T o back up depress the shift selector and then move it to the R (Reverse) position after stopping the vehicle completely . On the 5-speed manual transmission model, you cannot shift directly from the 5th gear into R (Reverse) . First ...
-
Nissan Frontier (2013) - page 307
2–wheel drive models (VQ40DE engine) GEAR MPH (km/h) 1st 35 (56) 2nd 60 (97) 3rd 87 (141) 4th — 5th — 4–wheel drive models (VQ40DE engine) 2H/4H position GEAR MPH (km/h) 1st 33 (54) 2nd 58 (93) 3rd 84 (135) 4th — 5th — 6th — 4L position GEAR MPH (km/h) 1st 12 (20) 2nd 22 (35) 3rd 32 (51) 4th 43 (70) 5th 55 (89) 6th — WARNING ● Be ...
-
Nissan Frontier (2013) - page 308
1. ACCEL/RES switch 2. COAST/SET switch 3. ON/OFF switch 4. CANCEL switch PRECAUTIONS ON CRUISE CONTROL ● If the cruise control system malfunctions, it cancels automatically . The SET indicator light in the instrument panel then blinks to warn the driver. ● If the SET indicator light blinks, turn the cruise control main switch off and have the ...
-
Nissan Frontier (2013) - page 309
T o cancel the preset speed, use one of the following three methods. ● Push the CANCEL button; the SET indicator light in the instrument panel goes out. ● T ap the brake pedal; the SET indicator light goes out. ● T urn the main switch off. Both the CRUISE indicator light and SET indicator light in the instrument panel go out. The cruise contr ...
-
Nissan Frontier (2013) - page 310
Follow these easy-to-use Fuel Efficient Driving Tips to help you achieve the most fuel economy from your vehicle. 1. Use Smooth Accelerator and Brake Pedal Application ● Avoid rapid starts and stops ● Use smooth, gentle accelerator and brake application whenever possible ● Maintain constant speed while commut- ing and coast whenever possible ...
-
Nissan Frontier (2013) - page 311
10. Keeping your V ehicle Cool ● Park your vehicle in a covered parking area or in the shade whenever possible ● When entering a hot vehicle, opening the windows will help to reduce the inside temperature faster, resulting in reduced demand on your A/C system ● K eep your engine tuned up. ● Follow the recommended scheduled main- tenance. ? ...
-
Nissan Frontier (2013) - page 312
CAUTION ● Do not drive the vehicle in the 4H or 4LO position on dry hard surface roads. Driv- ing on dry, hard surfaces in 4H or 4LO may cause unnecessary noise, tire wear and increased fuel consumption. If the 4WD warning light turns on when you are driving on dry hard surface roads: – in the 4H position, shift the 4WD shift switch to 2WD. – ...
-
Nissan Frontier (2013) - page 313
TRANSFER CASE SHIFTING PROCEDURES The part time 4WD system provides 3 positions (2WD, 4H and 4L O) , so you can select the desired drive mode according to the driving conditions. 2WD or 4WD shift procedure: 4WD Shift Switch Position Wheels Driven Indicator Light Use Conditions 4WD Shift Procedure 4WD shift T ransfer 4LO position 2WD Rear wheels For ...
-
Nissan Frontier (2013) - page 314
*1: Before moving the shift selector from neutral, wait until the 4L O indicator light stays on steady. This indicates that the 4WD shift procedure is completed and the transfer gear is correctly set in the 4L O position. If the vehicle is shifted into gear before the indicator is on steady, the transfer gear may grind, not engage correctly or stay ...
-
Nissan Frontier (2013) - page 315
The transfer case 4WD shift switch is used to select either 2WD or 4WD depending on the driving conditions. There are three types of drive modes available, 2WD, 4H and 4L O. The 4WD shift switch electronically controls the transfer case operation. Rotate the switch to move between each mode, 2WD, 4H and 4L O. T o change into or out of 4LO, the vehi ...
-
Nissan Frontier (2013) - page 316
When the vehicle is stuck, ● Set the 4WD shift switch to 4H or 4L O. ● Use the Electronic Locking Rear Differential (E-Lock) system (if so equipped) . T urn the switch ON while the vehicle is stationary and apply the throttle to try to free the vehicle. ● If it is difficult to free the vehicle, rock the vehicle back and forth between reverse ...
-
Nissan Frontier (2013) - page 317
4WD shift indicator light The 4WD shift indicator light is located in the odometer display . The light should turn off within 1 second after turning the ignition switch to the ON position. While the engine is running, the 4WD shift indi- cator light will illuminate the position selected by the 4WD shift switch. ● The 4WD shift indicator light may ...
-
Nissan Frontier (2013) - page 318
● When the warning light comes on, the 2WD mode may be engaged even if the 4WD shift switch is in 4H . Be especially careful when driving. If corresponding parts are malfunctioning, the 4WD mode will not be engaged even if the 4WD shift switch is shifted. ● Do not drive the vehicle in the 4H or 4LO position on dry hard surface roads. Driv- ing ...
-
Nissan Frontier (2013) - page 319
WARNING ● Never leave the E-Lock system ON when driving on paved or hard-surfaced roads. T urning the vehicle may result in the rear wheels slipping and result in an accident and personal injury. After us- ing the E-Lock system to free the ve- hicle, turn the system OFF . ● Use the E-Lock system only when free- ing a stuck vehicle. T ry the 4LO ...
-
Nissan Frontier (2013) - page 320
WARNING ● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. ● Safe parking procedures require that both the parking brake be set and the transmission placed into P (Park) for automatic transmission models or in an appropriate gear for manual transmis- sion models. ...
-
Nissan Frontier (2013) - page 321
The power assisted steering uses a hydraulic pump, driven by the engine, to assist steering. If the engine stops or the drive belt breaks, you will still have control of the vehicle. However, much greater steering effort is needed, especially in sharp turns and at low speeds. WARNING If the engine is not running or is turned off while driving, the ...
-
Nissan Frontier (2013) - page 322
This procedure is described in the vehicle service manual and can be performed by a NISSAN dealer. ANTI-L OCK BRAKING S Y STEM (ABS) WARNING ● The Anti-lock Braking System (ABS) is a sophisticated device, but it cannot pre- vent accidents resulting from careless or dangerous driving techniques. It can help maintain vehicle control during braking ...
-
Nissan Frontier (2013) - page 323
When the ABS senses that 1 or more wheels are close to locking up, the actuator rapidly applies and releases hydraulic pressure. This action is similar to pumping the brakes very quickly . Y ou may feel a pulsation in the brake pedal and hear a noise from under the hood or feel a vibration from the actuator when it is operating. This is normal and ...
-
Nissan Frontier (2013) - page 324
The V ehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and ve- hicle motion. Under certain driving conditions, the VDC System helps to perform the following functions: ● Controls brake pressure to reduce wheel slip on one slipping drive wheel so power is transferred to a non slipping drive wheel on the same axle. ...
-
Nissan Frontier (2013) - page 325
● Do not modify the vehicle’s suspension. If suspension parts such as shock ab- sorbers, struts, springs, stabilizer bars, bushings and wheels are not NISSAN recommended for your vehicle or are extremely deteriorated, the VDC system may not operate properly. This could adversely affect vehicle handling per- formance, and the indicator may flash ...
-
Nissan Frontier (2013) - page 326
centrate on steering while reducing the burden of brake and accelerator operation. ● When additional braking is required on steep downhill roads activate the hill de- scent control system by pushing the switch ON, see “Hill descent control switch” in the “Instruments and controls” section. ● Once the system is activated the indicator li ...
-
Nissan Frontier (2013) - page 327
WARNING ● Always turn and look back before back - ing up. The RSS is not a substitute for proper backing procedures. ● Read and understand the limitations of the rear sonar system as contained in this section. Inclement weather may af- fect the function of the RSS; this may include reduced performance or a false activation. ● This system is n ...
-
Nissan Frontier (2013) - page 328
FREEING A FROZEN DOOR L OCK T o prevent a door lock from freezing, apply de-icer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole or use the remote keyless entry keyfob (if so equipped) . ANTI-FREEZE In the winter when it is anticipated that the tem- perature will drop below 32°F (0°C) , check t ...
-
Nissan Frontier (2013) - page 329
● Allow more stopping distance under these conditions. Braking should be started sooner than on dry pavement. ● Allow greater following distances on slippery roads. ● Watch for slippery spots (glare ice) . These may appear on an otherwise clear road in shaded areas. If a patch of ice is seen ahead, brake before reach- ing it. T ry not to brak ...
-
Nissan Frontier (2013) - page 330
6 In case of emergency First aid kit (if so equipped) .........................6 - 2 Hazard warning flasher switch ......................6 - 3 Flat tire ...........................................6 - 3 Tire Pressure Monitoring System (TPMS) ..........6 - 3 Changing a flat tire .............................6 - 4 Jump starting ....................... ...
-
Nissan Frontier (2013) - page 331
The first aid kit is located in the under-seat stor- age bins. T o access the first aid kit: For King cab model, lift up the rear jump seat and remove net to remove the first aid kit. Refer to “Jump Seats” in the “Safety — Seats, seat belts and supplemental restraint system” section ear- lier in the manual. For Crew cab model, lift up the ...
-
Nissan Frontier (2013) - page 332
Push the switch on to warn other drivers when you must stop or park under emergency condi- tions. All turn signal lights flash. WARNING ● If stopping for an emergency, be sure to move the vehicle well off the road. ● Do not use the hazard warning flashers while moving on the highway unless unusual circumstances force you to drive so slowly that ...
-
Nissan Frontier (2013) - page 333
● If the low tire pressure warning light illuminates while driving, avoid sudden steering maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as possible. Driving with under- inflated tires may permanently damage the tires and increase the likelihood of tire failure. Serious vehicle ...
-
Nissan Frontier (2013) - page 334
Blocking wheels Place suitable blocks 䊊 1 at both the front and back of the wheel diagonally opposite the flat tire 䊊 2 to prevent the vehicle from moving when it is jacked up. WARNING Be sure to block the wheel as the vehicle may move and result in personal injury. Getting the spare tire and tools For King Cab models: The tool storage compartm ...
-
Nissan Frontier (2013) - page 335
For Crew Cab models: The tools and tool case are located behind the rear bench seat. 1. Fold the rear bench seat down. Refer to “Folding the rear bench seatdown” in the “Safety–Seats, seat belts and supplemental restraint system” section earlier in this manual. 2. Remove the jack 䊊 1 and jacking tools 䊊 2 . 1. Fit the square end of th ...
-
Nissan Frontier (2013) - page 336
All models: 3. Seat the T -shaped end of the jack rod into the T -shaped opening of the spare tire winch. Apply pressure to keep the jack rod engaged in the spare tire winch and turn the jack rod counterclockwise to lower the spare tire. 4. Once the spare tire is completely lowered, reach under the vehicle, remove the retainer chain, and carefully ...
-
Nissan Frontier (2013) - page 337
● Use the correct jack -up points. Never use any other part of the vehicle for jack support. ● Never jack up the vehicle more than necessary. ● Never use blocks on or under the jack. ● Do not start or run the engine while vehicle is on the jack. It may cause the vehicle to move. This is especially true for vehicles with limited slip differe ...
-
Nissan Frontier (2013) - page 338
3. Install the assembled jack rod into the jack as shown. 4. T o lift the vehicle, securely hold the jack lever and rod. Carefully raise the vehicle until the tire clears the ground. 5. Remove the wheel nuts and then remove the tire. Installing the spare tire The spare tire is designed for emergency use. See specific instructions under the heading ...
-
Nissan Frontier (2013) - page 339
Adjust tire pressure to the COLD pressure. COLD pressure: After vehicle has been parked for three hours or more or driven less than 1 mile (1.6 km) . COLD tire pressures are shown on the Tire and Loading Information label located in the driver’s door opening. 5. Securely store the flat tire and jacking equip- ment in the vehicle. WARNING ● Alwa ...
-
Nissan Frontier (2013) - page 340
WARNING Always follow the instructions below. Failure to do so could result in damage to the charging system and cause personal injury. 1. If the booster battery is in another vehicle, position the two vehicles to bring their bat- teries near each other. Do not allow the two vehicles to touch. 2. Apply the parking brake. Move the shift se- lector t ...
-
Nissan Frontier (2013) - page 341
CAUTION ● Do not push start this vehicle. The three-way catalyst may be damaged. ● Automatic transmission models cannot be push-started or tow-started. At- tempting to do so may cause transmis- sion damage. ● For manual transmission models, never try to start the vehicle by towing it. When the engine starts, the forward surge could cause the ...
-
Nissan Frontier (2013) - page 342
6. After the engine cools down, check the cool- ant level in the engine coolant reservoir tank with the engine running. Add coolant to the engine coolant reservoir tank if necessary . Have your vehicle repaired at a NISSAN dealer. When towing your vehicle, all State (Provincial in Canada) and local regulations for towing must be followed. Incorrect ...
-
Nissan Frontier (2013) - page 343
T OWING RECOMMENDED B Y NISSAN T wo-wheel drive models NISSAN recommends that your vehicle be towed with the driving (rear) wheels off the ground or place the vehicle on a flat bed truck as illustrated. CAUTION ● Never tow automatic transmission models with the rear wheels on the ground or four wheels on the ground (forward or backward) , as this ...
-
Nissan Frontier (2013) - page 344
Four-wheel drive models NISSAN recommends that towing dollies be used when towing your vehicle or place the ve- hicle on a flat bed truck as illustrated. CAUTION Never tow 4WD models with any of the wheels on the ground as this may cause serious and expensive damage to the transfer case and transmission. VEHICLE RECOVER Y (freeing a stuck vehicle) ...
-
Nissan Frontier (2013) - page 345
● Attach recovery devices only to main structural members of the vehicle or the recovery hooks. ● Do not use the vehicle tie-downs to tow or free a stuck vehicle. ● Only use devices specifically designed for vehicle recovery and follow the manufacturer’s instructions. ● Always pull the recovery device straight out from the front of the ve ...
-
Nissan Frontier (2013) - page 346
7 Appearance and care Cleaning exterior ..................................7 - 2 W ashing ......................................7 - 2 W axing ........................................7 - 2 Removing spots ................................7 - 3 Underbody ....................................7 - 3 Glass .........................................7 - 3 Alumi ...
-
Nissan Frontier (2013) - page 347
In order to maintain the appearance of your ve- hicle, it is important to take proper care of it. T o protect the paint surfaces, please wash your vehicle as soon as you can: ● after a rainfall to prevent possible damage from acid rain. ● after driving on coastal roads. ● when contaminants such as soot, bird drop- pings, tree sap, metal parti ...
-
Nissan Frontier (2013) - page 348
REMOVING SPO TS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the surface of the paint to avoid lasting damage or staining. Special cleaning products are available at a NISSAN dealer or any automotive accessory store. UNDERBOD Y In areas where road salt is used in winter, it is necessary to clean the u ...
-
Nissan Frontier (2013) - page 349
Occasionally remove loose dust from the interior trim, plastic parts and seats using a vacuum cleaner or soft bristled brush. Wipe the vinyl and leather surfaces with a clean, soft cloth damp- ened in mild soap solution, then wipe clean with a dry , soft cloth. Regular care and cleaning is required in order to maintain the appearance of the leather ...
-
Nissan Frontier (2013) - page 350
Floor mat positioning aid This vehicle includes two driver’s side front floor mat brackets and one passenger’s side front floor mat bracket to help keep your floor mats in place. Genuine NISSAN floor mats have been specially designed for your vehicle model. The driver’s side floor mat has two grommet holes incorporated in it and the passenger ...
-
Nissan Frontier (2013) - page 351
T emperature High temperatures accelerate the rate of corro- sion to those parts which are not well ventilated. Air pollution Industrial pollution, the presence of salt in the air in coastal areas, or heavy road salt use acceler- ates the corrosion process. Road salt also accel- erates the disintegration of paint surfaces. T O PRO TECT Y OUR VEHICL ...
-
Nissan Frontier (2013) - page 352
8 Maintenance and do-it-yourself Maintenance requirements ..........................8 - 2 General maintenance ..............................8 - 2 Explanation of general maintenance items .........8 - 2 Maintenance precautions ...........................8 - 5 Engine compartment check locations ................8 - 6 Engine cooling system ............ ...
-
Nissan Frontier (2013) - page 353
Y our NISSAN has been designed to have mini- mum maintenance requirements with long ser- vice intervals to save you both time and money . However, some day-to-day and regular mainte- nance is essential to maintain your NISSAN’s good mechanical condition, as well as its emis- sions and engine performance. It is the owner’s responsibility to make ...
-
Nissan Frontier (2013) - page 354
When driving in areas using road salt or other corrosive materials, check lubrication frequently . Lights* Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely . Also check headlight aim. Road wheel nuts (lug nuts)* Wh ...
-
Nissan Frontier (2013) - page 355
Seat belts Check that all parts of the seat belt system (for example, buckles, anchors, adjusters and retractors) operate properly and smoothly , and are installed securely . Check the belt web- bing for cuts, fraying, wear or damage. Steering wheel Check for changes in the steer- ing system, such as excessive freeplay , hard steering or strange no ...
-
Nissan Frontier (2013) - page 356
When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle. The following are general precau- tions which should be closely observed. WARNING ● Park the vehicle on a level surface, ap- ply the parking brake securely and block the wheels to prevent ...
-
Nissan Frontier (2013) - page 357
QR25DE engine 1. Windshield-washer fluid reservoir 2. Fuse/Fusible link box 3. Fuse and relay box 4. Air cleaner 5. Engine oil filler cap 6. Engine oil dipstick 7. Brake fluid reservoir/Clutch fluid reservoir (M/T model) 8. Drive belt location 9. Radiator cap 10. P ower steering fluid reservoir 11. Battery 12. Engine coolant reservoir WDI0643 ENGIN ...
-
Nissan Frontier (2013) - page 358
VQ40DE engine 1. Windshield-washer fluid reservoir 2. Fuse/fusible link box 3. Fuse and relay box 4. Engine oil filler cap 5. Engine oil dipstick 6. Brake fluid reservoir/Clutch fluid reservoir (M/T model) 7. Air cleaner 8. Drive belt location 9. Radiator cap 10. P ower steering fluid reservoir 11. Battery 12. Engine coolant reservoir LII0167 Maint ...
-
Nissan Frontier (2013) - page 359
The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round anti-freeze and coolant protection. The antifreeze solution con- tains rust and corrosion inhibitors. Additional en- gine cooling system additives are not necessary . WARNING ● ...
-
Nissan Frontier (2013) - page 360
CHECKING ENGINE COOLANT LEVEL Check the coolant level in the reservoir when the engine is cold. If the coolant level is below the MIN level, add coolant to the MAX level. If the reservoir is empty , check the coolant level in the radiator when the engine is cold. If there is insufficient coolant in the radiator, fill the radiator with coolant up to ...
-
Nissan Frontier (2013) - page 361
CHECKING ENGINE OIL LEVEL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature. 3. T urn off the engine. Wait more than 10 minutes for the oil to drain back into the oil pan. 4. Remove the dipstick and wipe it clean. Re- insert it all the way . 5. Remove the d ...
-
Nissan Frontier (2013) - page 362
CAUTION Oil level should be checked regularly. Op- erating the engine with an insufficient amount of oil can damage the engine, and such damage is not covered by warranty. CHANGING ENGINE OIL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature, then turn it o ...
-
Nissan Frontier (2013) - page 363
WARNING ● Prolonged and repeated contact with used engine oil may cause skin cancer. ● T ry to avoid direct skin contact with used oil. If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible. ● Keep used engine oil out of reach of children. CAUTION Be careful not to burn yourself. The engine oil may be hot. 6. ...
-
Nissan Frontier (2013) - page 364
CAUTION Be careful not to burn yourself. The engine oil may be hot. 6. Wipe the engine oil filter sealing surface with a clean rag. CAUTION Be sure to remove any old gasket material remaining on the sealing surface of the engine. Failure to do so could lead to engine damage. 7. Coat the gasket on the new filter with clean engine oil. 8. Screw on th ...
-
Nissan Frontier (2013) - page 365
The fluid level should be checked using the HO T MAX range on the power steering fluid reservoir at fluid temperatures of 122° - 176°F (50° - 80°C) or using the COLD MAX range on the power steering fluid reservoir at fluid tempera- tures of 32° - 86°F (0° - 30°C) . If the fluid is at or below the MIN line, add Genu- ine NISSAN PSF . Remove ...
-
Nissan Frontier (2013) - page 366
CLUT CH FLUID (if so equipped) Check the clutch fluid level in the reservoir (manual transmissions only) . If the fluid level is below the MIN line, add Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DO T 3 fluid up to the MAX line. If fluid must be added fre- quently , the system should be checked by a NISSAN dealer. For further brake a ...
-
Nissan Frontier (2013) - page 367
● K eep the battery surface clean and dry. Clean the battery with a solution of baking soda and water. ● Make certain the terminal connections are clean and securely tightened. ● If the vehicle is not to be used for 30 days or longer, disconnect the negative (-) battery terminal cable to prevent discharge. NO TE: Care should be taken to avoid ...
-
Nissan Frontier (2013) - page 368
1. Remove the vent caps with a screwdriver as shown. Use a cloth to protect the battery case. 2. Check the fluid level in each cell. If it is necessary to add fluid, add only distilled water to bring the level up to the bottom of the filler opening. Do not overfill. Reinstall the vent caps. V ehicles operated in high temperatures or under severe co ...
-
Nissan Frontier (2013) - page 369
CAUTION ● Do not ground accessories directly to the battery terminal. Doing so will by- pass the variable voltage control sys- tem and the vehicle battery may not charge completely. ● Use electrical accessories with the en- gine running to avoid discharging the vehicle battery. Y our vehicle is equipped with a variable voltage control system. T ...
-
Nissan Frontier (2013) - page 370
1. Visually inspect the belt for signs of unusual wear, cuts, fraying or looseness. If the belt is in poor condition or is loose, have it replaced or adjusted by a NISSAN dealer. 2. Have the belt checked regularly for condi- tion and tension in accordance with the maintenance schedule found in the “NISSAN Service and Maintenance Guide” . 1. P o ...
-
Nissan Frontier (2013) - page 371
If replacement is required, see your NISSAN dealer for assistance. Iridium-tipped spark plugs (VQ40DE models) It is not necessary to replace iridium-tipped 䊊 A spark plugs as frequently as conventional type spark plugs because they last much longer. Fol- low the maintenance log shown in the “NISSAN Service and Maintenance Guide” . Do not serv ...
-
Nissan Frontier (2013) - page 372
WARNING ● Operating the engine with the air cleaner removed can cause you or oth- ers to be burned. The air cleaner not only cleans the air, it stops the flame if the engine backfires. If it isn’t there, and the engine backfires, you could be burned. Do not drive with the air cleaner removed, and be careful when working on the engine with the a ...
-
Nissan Frontier (2013) - page 373
6. Replace the filter cover. The cover will click into place under the tab. 7. Install the glove box door. CLEANING If your windshield is not clear after using the windshield washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield. Clean the outside of the windshield with a washer solution or a mild ...
-
Nissan Frontier (2013) - page 374
6. Return the wiper to its original position and release it until it has made contact with the windshield. CAUTION ● After wiper blade replacement, return the wiper arm to its original position; otherwise it may be damaged when the hood is opened. ● Make sure the wiper blades contact the glass; otherwise the arms may be dam- aged from wind pres ...
-
Nissan Frontier (2013) - page 375
Proper brake inspection intervals should be followed. For more information regarding brake inspections, see the appropriate mainte- nance schedule information in the “NISSAN Ser- vice and Maintenance Guide” . T wo types of fuses are used. T ype 䊊 A is used in the fuse boxes in the engine compartment. T ype 䊊 B is used in the passenger compa ...
-
Nissan Frontier (2013) - page 376
ENGINE COMP ARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not come on, check for an open fuse. 1. Be sure the ignition switch and the headlight switch are OFF . 2. Open the engine hood. 3. Remove th ...
-
Nissan Frontier (2013) - page 377
Fusible links If the electrical equipment does not operate and fuses are in good condition, check the fusible links. If any of these fusible links are melted, replace with only Genuine NISSAN parts. P ASSENGER COMP ARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the elect ...
-
Nissan Frontier (2013) - page 378
Extended storage switch If any electrical equipment does not operate, remove the extended storage switch and check for an open fuse. NO TE: The extended storage switch is used for long term vehicle storage. Even if the ex - tended storage switch is broken it is not necessary to replace it. Replace only the open fuse in the switch with a new fuse. H ...
-
Nissan Frontier (2013) - page 379
CAUTION Be careful not to allow children to swallow the battery or removed parts. KEYFOB (if so equipped) Replace the battery in the keyfob as follows: 䊊 1 Open the lid using a coin 䊊 A . 䊊 2 Remove the battery 䊊 B . 䊊 3 Install a new battery 䊊 C with the “+” facing down. ● Hold the battery by the edges. Holding the battery across ...
-
Nissan Frontier (2013) - page 380
● Do not touch the internal circuit and electric terminals as it could cause a malfunction. ● When changing the battery , do not let dust or oil get on the keyfob. ● There is danger of explosion if a lithium bat- tery is incorrectly replaced. Replace only with the same or equivalent type. Recommended battery: CR2025 or equivalent. 䊊 4 Close ...
-
Nissan Frontier (2013) - page 381
Fog may temporarily form inside the lens of the exterior lights in the rain or in a car wash. A temperature difference between the inside and the outside of the lens causes the fog. This is not a malfunction. If large drops of water collect inside the lens, contact a NISSAN dealer. Removing the headlight bulb 1. Open the hood. 2. Disconnect the neg ...
-
Nissan Frontier (2013) - page 382
EXTERIOR AND INTERIOR LIGHTS Item W attage (W) Bulb No.* 1 Headlight 60/55 9007 (HB5) T urn signal light/Parking light 28/8 HT7444NA Side marker 5 168 Rear combination light T urn signal 27 3156AK Stop/T ail 27/8 3157K Back -up 18 921 License plate light 5 W5W Fog light* 2 (if so equipped) 55 H11 Map lights (if so equipped) 8 AL12 Interior light 8 ...
-
Nissan Frontier (2013) - page 383
Replacement procedures All other lights are either type A , B, C or D. When replacing a bulb, first remove the lens and/or cover. : Indicates bulb removal : Indicates bulb installation Use a cloth 䊊 1 to protect the housing. WDI0306 Map lights/personal lights LDI0478 Interior light WDI0206 8-32 Maintenance and do-it-yourself ...
-
Nissan Frontier (2013) - page 384
If you have a flat tire, see “Flat tire” in the “In case of emergency” section of this manual. TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pressure of all tires except the spare. When the low tire pressure warning light is lit and the CHECK ...
-
Nissan Frontier (2013) - page 385
Tire inflation pressure Check the tire pressures (including the spare) often and always prior to long dis- tance trips. The recommended tire pres- sure specifications are shown on the F .M.V .S.S./C.M.V .S.S. certification label or the Tire and Loading Information label under the “Cold Tire Pressure” heading. The Tire and Loading Information la ...
-
Nissan Frontier (2013) - page 386
Tire and loading information label 䊊 1 Seating capacity: The maximum num- ber of occupants that can be seated in the vehicle. 䊊 2 V ehicle load limit: See loading infor- mation in the “T echnical and con- sumer information” section. 䊊 3 Original tire size: The size of the tires originally installed on the vehicle at the factory . 䊊 4 Co ...
-
Nissan Frontier (2013) - page 387
Checking tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem side- ways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage. 3. Remove ...
-
Nissan Frontier (2013) - page 388
TIRE LABELING Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information iden- tifies and describes the fundamental characteristics of the tire and also pro- vides the tire identification number (TIN) for safety standard certification. The TIN can be used to identify the tire in case of ...
-
Nissan Frontier (2013) - page 389
䊊 2 TIN (Tire Identification Number) for a new tire (example: DO T XX XX XXX XXXX) 1. DO T : Abbreviation for the “Depart- ment Of T ransportation” . The symbol can be placed above, below or to the left or right of the Tire Identification Number. 2. T wo-digit code: Manufacturer’s identification mark. 3. T wo-digit code: Tire size. 4. Three ...
-
Nissan Frontier (2013) - page 390
䊊 7 The word “radial” The word “radial” is shown if the tire has radial structure. 䊊 8 Manufacturer or brand name Manufacturer or brand name is shown. Other Tire-related T erminology In addition to the many terms that are defined throughout this section, Intended Outboard Sidewall is (1) the sidewall that contains a whitewall, bears whi ...
-
Nissan Frontier (2013) - page 391
studded tires. Skid and traction capabilities of studded snow tires on wet or dry surfaces may be poorer than that of non-studded snow tires. TIRE CHAINS Use of tire chains may be prohibited according to location. Check the local laws before installing tire chains. When installing tire chains, make sure they are the proper size for the tires on you ...
-
Nissan Frontier (2013) - page 392
Wheel nut tightening torque: 98 ft-lb (133 N·m) The wheel nuts must be kept tight- ened to specifications at all times. It is recommended that wheel nuts be tightened to specification at each tire rotation interval. WARNING ● After rotating the tires, check and adjust the tire pressure. ● Retighten the wheel nuts when the vehicle has been driv ...
-
Nissan Frontier (2013) - page 393
Replacing wheels and tires When replacing a tire, use the same size, tread design, speed rating and load carrying capacity as originally equipped. Recommended types and sizes are shown in “Wheels and tires” in the “T echnical and consumer information” section of this manual. WARNING ● The use of tires other than those recom- mended or the ...
-
Nissan Frontier (2013) - page 394
Wheel balance service should be per- formed with the wheels off the vehicle. Spin balancing the wheels on the vehicle could lead to mechanical damage. ● For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Infor- mation” (Canada) in the Warranty In- formation Booklet. Care of wheels ...
-
Nissan Frontier (2013) - page 395
MEMO 8-44 Maintenance and do-it-yourself ...
-
Nissan Frontier (2013) - page 396
9 T echnical and consumer information Capacities and recommended fuel/lubricants .........9 - 2 Fuel recommendation ...........................9 - 4 Engine oil and oil filter recommendations ..........9 - 6 Air conditioner system (if so equipped) refrigerant and oil recommendations . .............9 - 7 Specifications ............................... ...
-
Nissan Frontier (2013) - page 397
The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity. Capacity (Approximate) Recommended Fluids and Lubricants US measure Imp measure Liter Fuel 21-1/8gal 17-5/8 gal ...
-
Nissan Frontier (2013) - page 398
Capacity (Approximate) Recommended Fluids and Lubricants US measure Imp measure Liter Air conditioning system refrigerant — — — HFC-134a (R-134a) *5 Air conditioning system oil — — — Genuine NISSAN A/C System Oil T ype R or equivalent *5 T ransfer fluid 2-1/8 qt 1-3/4 qt 2.0 Genuine NISSAN Matic D A TF recommended *6 Front final drive o ...
-
Nissan Frontier (2013) - page 399
FUEL RECOMMENDA TION Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91) . CAUTION ● Only vehicles with the E-85 filler door label can operate on E-85. Fuel system or other damage can occur if E-85 is used in vehicles that are not designed to run on E-85. ● Using a fuel ...
-
Nissan Frontier (2013) - page 400
● If a methanol blend is used, it should contain no more than 5% methanol (methyl alcohol, wood alcohol) . It should also contain a suitable amount of appropriate cosolvents and corro- sion inhibitors. If not properly formu- lated with appropriate cosolvents and corrosion inhibitors, such methanol blends may cause fuel system damage and/or vehicl ...
-
Nissan Frontier (2013) - page 401
ENGINE OIL AND OIL FIL TER RECOMMENDA TIONS Selecting the correct oil It is essential to choose the correct grade, quality and viscosity engine oil to ensure satisfactory engine life and performance. See “Capacities and recommended fuel/lubricants” earlier in this section. NISSAN recommends the use of an energy conserving oil in order to improv ...
-
Nissan Frontier (2013) - page 402
Y our engine was filled with a high-quality engine oil when it was built. Y ou do not have to change the oil before the first recommended change interval. Oil and filter change intervals depend upon how you use your vehicle. Operation under the following conditions may require more frequent oil and filter changes: ● repeated short distance drivin ...
-
Nissan Frontier (2013) - page 403
ENGINE Model QR25DE VQ40DE T ype Gasoline, 4-cycle, DOHC Gasoline, 4-cycle, DOHC Cylinder arrangement 4-cylinder in-line 6-cylinder, V-block, Slanted at 60° Bore x Stroke in (mm) 3.5 x 3.9 (89.0 x 100.0) 3.760 x 3.622 (95.5 x 92) Displacement cu in (cm 3 ) 151.82 (2,488) 241.30 (3,954) Firing order 1–3–4–2 1–2–3–4–5–6 Idle speed M/ ...
-
Nissan Frontier (2013) - page 404
WHEELS AND TIRES Wheels 15 x 6.5JJ 16 x 7.0JJ 18 x 7.5JJ Tires P235/75R15 P265/70R16 P265/75R16 P265/60R18 Spare tire Full size DIMENSIONS AND WEIGHTS Overall length Short wheel base in (mm) 205.5 (5,220) Long wheel base in (mm) 219.4 (5,574) Overall width in (mm) 72.8 (1,850) Overall height With roof rack in (mm) 73.9 (1,878) Without roof rack S a ...
-
Nissan Frontier (2013) - page 405
When planning to drive your NISSAN ve- hicle in another country, you should first find out if the fuel available is suitable for your vehi- cle’s engine. Using fuel with an octane rating that is too low may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline. There- fore, avoid taking your vehicle to areas where app ...
-
Nissan Frontier (2013) - page 406
ENGINE SERIAL NUMBER The number is stamped on the engine as shown. F .M.V .S.S./C.M.V .S.S. CERTIFICA TION LABEL The Federal/Canadian Motor V ehicle Safety Standard (F .M.V .S.S./C.M.V .S.S.) certification la- bel is affixed as shown. This label contains valu- able vehicle information, such as: Gross V ehicle W eight Ratings (GVWR) , Gross Axle Wei ...
-
Nissan Frontier (2013) - page 407
TIRE AND L OADING INFORMA TION LABEL The cold tire pressure is shown on the Tire and Loading Information label. The label is located as shown. AIR CONDITIONER SPECIFICA TION LABEL (if so equipped) The air conditioner specification label is affixed as shown. INST ALLING FRONT LICENSE PLA TE WITH GROMMETS Use the following steps to mount the front li ...
-
Nissan Frontier (2013) - page 408
INST ALLING FRONT LICENSE PLA TE WITHOUT GROMMETS Use the following steps to mount the front license plate without grommets: 1. Make a shallow hole in each plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. T o avoid damaging the threads behind the finisher, apply only light pressure to the drill. 2. Mount the licens ...
-
Nissan Frontier (2013) - page 409
● V ehicle Capacity Weight, Load limit, T otal load capacity - maximum total weight limit specified of the load (passengers and cargo) for the ve- hicle. This is the maximum combined weight of occupants and cargo that can be loaded into the vehicle. If the vehicle is used to tow a trailer, the trailer tongue weight must be in- cluded as part of t ...
-
Nissan Frontier (2013) - page 410
Steps for determining correct load limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX lbs or XXX kg” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX ...
-
Nissan Frontier (2013) - page 411
5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be trans- ferred to your vehicle. Consult this manual to determine how this re- duces the av ...
-
Nissan Frontier (2013) - page 412
1. Side channels 2. Header channel 3. Channel sections 4. Floor channels UTILI- TRACK™ CHANNEL S Y STEM (if so equipped) WARNING ● Properly install and tighten the tie- down cleats into the Utili-track™ chan- nel system. Also, do not attach any rope or straps directly to the channel. Failure to properly install the tie-down cleats or attachin ...
-
Nissan Frontier (2013) - page 413
3. Insert the cleat into the channel perpendicu- lar to the channel as shown. Then rotate the cleat clockwise 90° and slide it to the de- sired location. 4. P osition the cleat so the nubs on the bottom fully seat into the channel detents. LTI0103 LTI0104 9-18 T echnical and consumer information ...
-
Nissan Frontier (2013) - page 414
5. There should be no gap between the bottom of the cleat and the top of the channel. Tighten the center bolt hand tight (20-40 in- lbs ) . WTI0124 T echnical and consumer information 9-19 ...
-
Nissan Frontier (2013) - page 415
CAUTION ● Install only one cleat per section of channel. ● Applying loads at angles to the cleats greater then 45° or loads greater than 150 lbs. (header and floor channels) or 200 lbs. (side channels) may cause damage to the channel or bed. LTI0106 9-20 T echnical and consumer information ...
-
Nissan Frontier (2013) - page 416
WARNING Do not install accessories over the gap between the front and rear side channels. Doing this could affect the rear structure in certain rear impacts, which could result in serious injury. CAUTION Properly secure all cargo with ropes or straps to prevent it from sliding or shifting. Use the channel end stoppers to help se- cure items in the ...
-
Nissan Frontier (2013) - page 417
Install the channels end stoppers as follows: 1. Remove the channel protectors by sliding them out the back of the truck bed. Properly store the channel protectors. 2. Loosen the bolt on the center of the end stopper with the provided wrench and insert it into the channel. 3. P osition the end stopper to the desired lo- cation on the channel so the ...
-
Nissan Frontier (2013) - page 418
CREW CAB MODELS Crew Cab short wheel base models should not be used to carry a slide-in camper. KING CAB MODELS This information is provided for you to properly install a slide-in camper and is based on the National Highway T raffic Safety Administration regulations. It is recommended that, before in- stalling the camper, you carefully read the fol ...
-
Nissan Frontier (2013) - page 419
WARNING Overloading or improper loading can ad- versely affect vehicle handling, braking and performance and may lead to accidents. VEHICLE L OAD WEIGHT CAP ACITY The vehicle payload weight capacity shown on the Tire and Loading Information label, see “Tire and Loading Information label” in this section, indicates the maximum total weight of pa ...
-
Nissan Frontier (2013) - page 420
MAXIMUM L OAD LIMITS Maximum trailer loads Never allow the total trailer load to exceed the value specified in the “T owing Load/Specification” chart found later in this sec- tion. The total trailer load equals trailer weight plus its cargo weight. ● When towing a trailer load of 3,500 lbs. (1,587 kg) or more, trailers with a brake system MUS ...
-
Nissan Frontier (2013) - page 421
T ongue load When using a weight carrying or a weight distrib- uting hitch, keep the tongue load between 10 - 15 percent of the total trailer load or use the trailer tongue load specified by the trailer manu- facturer. The tongue load must be within the maximum tongue load limits shown in the follow- ing “T owing Load/Specification” chart. If t ...
-
Nissan Frontier (2013) - page 422
1. Find the GCWR for your vehicle on the ⬙ T owing Load/Specification ⬙ chart found later in this section. 2. Subtract the actual vehicle weight from the GCWR. The remaining amount is the avail- able maximum towing capacity . T o determine the Gross T railer Weight, weigh your trailer on a scale with all equipment and cargo, that are normally i ...
-
Nissan Frontier (2013) - page 423
T OWING L OAD/SPECIFICA TION King Cab 2WD (4 cyl) King Cab 2WD (6 cyl) King Cab 4WD (6 cyl) Crew Cab 2WD Crew Cab 4WD Maximum T owing Capacity*1, *2, *3 3,500 lb. (1,588 kg) 6,505 lb. (2,949 kg) 6,300 lb. (2,858 kg) 6,300 lb. (2,858 kg) 6,100 lb. (2,767 kg) Maximum T ongue Load*2, *3 350 lb. (158 kg) 650 lb. (295 kg) 630 lb. (285 kg) 630 lb. (285 k ...
-
Nissan Frontier (2013) - page 424
T OWING SAFETY T railer hitch Y our vehicle may be equipped with an optional trailer tow package. The trailer tow package in- cludes a receiver-type frame mounted hitch. This hitch is rated for the maximum towing capacity of this vehicle when the proper towing equipment is used. Choose a proper ball mount and hitch ball that is rated for the traile ...
-
Nissan Frontier (2013) - page 425
Bumper towing The genuine NISSAN step bumper has provi- sions to install a trailer hitch ball and is designed to tow trailers of a maximum weight of 3,500 lb (1,588 kg). T o install a trailer hitch ball cut out the circle in the center of the step bumper 䊊 A , then remove it to install the trailer hitch ball. W eight carrying hitches A weight car ...
-
Nissan Frontier (2013) - page 426
Sway control device Sudden maneuvers, wind gusts, and buffeting caused by other vehicles can affect trailer han- dling. Sway control devices may be used to help control these affects. If you choose to use one, contact a reputable trailer hitch supplier to make sure the sway control device will work with the vehicle, hitch, trailer and the trailer? ...
-
Nissan Frontier (2013) - page 427
Safety chains Always use suitable safety chains between your vehicle and the trailer. The safety chains should be crossed and should be attached to the hitch, not to the vehicle bumper or axle. The safety chains can be attached to the bumper if the hitch ball is mounted to the bumper. Be sure to leave enough slack in the chains to permit turning co ...
-
Nissan Frontier (2013) - page 428
A Genuine NISSAN jumper harness is available that is specifically designed to be used when installing an aftermarket brake controller. Install the aftermarket electric trailer brake con- troller according to the manufacturer’s instruc- tions. Pre-towing tips ● Be certain your vehicle maintains a level position when a loaded and/or unloaded trai ...
-
Nissan Frontier (2013) - page 429
6. Make sure the indicator light (if so equipped) indicates the transfer case is in 4H, 4L, or 2H and that the A TP light is off. If the indicator light is flashing, or the A TP light is ON, make sure the transmission is in P (Park) (A/T) and turn the 4WD switch to 2WD or 4H. See “ Automatic transmission park warning light” in the “Instrument ...
-
Nissan Frontier (2013) - page 430
● Downshift the transmission to a lower gear for engine braking when driving down steep or long hills. This will help slow the vehicle without applying the brakes. ● Avoid holding the brake pedal down too long or too frequently . This could cause the brakes to overheat, resulting in reduced braking efficiency . ● Increase your following dista ...
-
Nissan Frontier (2013) - page 431
DO T (Department of T ransportation) Quality Grades: All passenger car tires must conform to federal safety requirements in addition to these grades. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: T readwear 200 Traction AA T emperature A T readwear The treadwear grad ...
-
Nissan Frontier (2013) - page 432
Y our NISSAN vehicle is covered by the following emission warranties: For USA 1. Emission Defects W arranty 2. Emissions Performance W arranty Details of this warranty may be found with other vehicle warranties in your W arranty Information Booklet which comes with your NISSAN vehicle. If you did not receive a W arranty Information Booklet, or it i ...
-
Nissan Frontier (2013) - page 433
Additional information concerning motor vehicle safety may be obtained from T rans- port Canada’s Road Safety Information Centre at 1-800-333-0371 or online at www .tc.gc.ca/roadsafety (English speak - ers) or www .tc.gc.ca/securiteroutiere (French speakers) . T o notify NISSAN of any safety concerns please contact our Consumer Information Centre ...
-
Nissan Frontier (2013) - page 434
This vehicle is equipped with an Event Data Re- corder (EDR) . The main purpose of an EDR is to record, in certain crash or near crash-like situa- tions, such as an air bag deployment or hitting a road obstacle, data that will assist in understand- ing how a vehicle’s systems performed. The EDR is designed to record data related to vehicle dynami ...
-
Nissan Frontier (2013) - page 435
MEMO 9-40 T echnical and consumer information ...
-
Nissan Frontier (2013) - page 436
10 Index 4 W D w a r n i n g l i g h t ............... 2 - 1 7 A Active brake limited slip (ABLS) system . . .5-36 Air bag (See supplemental restraint s y s t e m ) ..................... 1 - 6 3 Air bag system Front (See supplemental front impact air bag system) ............... 1 - 7 0 Air bag warning labels . . . . . . . . . . . . .1-77 Air bag wa ...
-
Nissan Frontier (2013) - page 437
Child restraint with top tether strap ....... 1 - 2 9 Child safety rear door lock ............ 3 - 6 Chimes, audible reminders ........... 2 - 2 4 Cleaning exterior and interior . . . . . . . . . . .7-2 C l o c k ....................... 4 - 4 5 Clutch C l u t c h f l u i d .................. 8 - 1 5 Clutch interlock (clutch start) switch . . . . . ...
-
Nissan Frontier (2013) - page 438
Fuel Capacities and recommended fuel/lubricants ................. 9 - 2 Fuel economy ................ 5 - 2 4 Fuel-filler door and cap ........... 3 - 1 1 Fuel gauge ................... 2 - 7 F u e l o c t a n e r a t i n g ............... 9 - 5 Fuel recommendation ............. 9 - 4 Loose fuel cap warning . . . . . . . .2-5, 3-11 F u s e s ...... ...
-
Nissan Frontier (2013) - page 439
Headlight and turn signal switch ...... 2 - 2 8 Headlight control switch . . . . . . . . . .2-28 H e a d l i g h t s .................. 8 - 2 9 I n t e r i o r l i g h t .................. 2 - 5 3 L i g h t b u l b s .................. 8 - 2 9 Low tire pressure warning light ....... 2 - 1 8 Low windshield-washer fluid warning l i g h t ............ ...
-
Nissan Frontier (2013) - page 440
Push starting ................... 6 - 1 2 R Radio Car phone or CB radio ........... 4 - 7 7 FM/AM radio with compact disc (CD) player .................. 4 - 4 5 FM/AM/SA T radio with compact disc (CD) player .............. 4 - 4 9 , 4 - 5 4 Steering wheel audio control switch .... 4 - 7 5 Readiness for inspection maintenance (I/M) test ............ ...
-
Nissan Frontier (2013) - page 441
Automatic power window switch ...... 2 - 4 9 Clutch interlock (clutch start) switch .... 2 - 3 6 Electronic locking rear differential (E-Lock) s y s t e m s w i t c h ................ 2 - 3 5 F o g l i g h t s w i t c h ............... 2 - 3 2 Hazard warning flasher switch ........ 6 - 3 Headlight and turn signal switch ...... 2 - 2 8 Headlight con ...
-
Nissan Frontier (2013) - page 442
Low tire pressure warning light ....... 2 - 1 8 Low windshield-washer fluid warning l i g h t ...................... 2 - 1 9 Passenger air bag and status light ..... 1 - 7 2 Seat belt warning light ............ 2 - 1 9 V ehicle security system ........... 2 - 2 4 W arning/indicator lights and audible reminders ................... 2 - 1 4 W arning l ...
-
Nissan Frontier (2013) - page 443
RECOMMENDED FUEL: Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91) . CAUTION ● Using a fuel other than that specified could adversely affect the emission control system, and may also affect the warranty coverage. ● Under no circumstances should a leaded gasoline be us ...
-
Nissan Frontier (2013) - page 444
® 2013 FRON T I E R OWN E R’S MAN UAL For y our s afety , read car efully and keep in this v ehicle. 2013 N IS SAN FR O NTI E R D40-D D40-D Printing : November 2012 (17) Publication No.: OM1E 0D40U1 Printed in U .S.A. OM3E 0D40U0 ...
Do you have a question concerning Nissan Frontier (2013)?
Use the form below
If you did not solve your problem by using a manual Nissan Frontier (2013), ask a question using the form below. If a user had a similar problem with Nissan Frontier (2013) it is likely that he will want to share the way to solve it.