-
Clarke RS-16 DC - page 1
RS-16 RS-16 DC Operator's Manual Manual del operador Manuel de l’utilisateur Form No. 71121A 1/06 Printed in the U.S.A. This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting any service or maintenance procedure to your Clarke American Sanders machine cou ...
-
Clarke RS-16 DC - page 2
EN ENGLISH -2- Clarke ® American Sanders Operator's Manual (EN) - RS-16 /RS-16DC CONTENTS OF THIS BOOK Important Safety Instructions ......................................................... ..................................... 3 Machine Specifications .......................................................................................... ...
-
Clarke RS-16 DC - page 3
EN ENGLISH Clarke ® American Sanders Operator's Manual (EN) - RS-16 /RS-16DC - 3 - OPERA TOR SAFETY INSTRUCTIONS W ARNING A VERTISSEMENT ADVERTENCIA DANGER means: Severe bodily injury or death can occur to you or other personnel if the DANGER statements found on this machine or in this Owner's Manual are ignored or are not adhered to. Re ...
-
Clarke RS-16 DC - page 4
EN ENGLISH -4- Clarke ® American Sanders Operator's Manual (EN) - RS-16 /RS-16DC WARNING: Sanding wood or varnish produces dust that could self ignite and could cause injury or damage. Dispose accordingly. WARNING: Use of this machine as a step or furniture could result in injury or damage. Do not use this machine as a step or furniture. Do n ...
-
Clarke RS-16 DC - page 5
EN ENGLISH Clarke ® American Sanders Operator's Manual (EN) - RS-16 /RS-16DC - 5 - Machine Specifications Model RS-16 and RS-16DC Part Number Voltage (Volts) 1 2 0 Frequency (Hz) 6 0 Current (Amps) 1 5 Pad /Brush Speed 175 rpm Power 1.5 hp (1.1 kW) Gearbox 3-Planet Pad Driver Size 16" (41 cm) Cord Length 50' (15 m) Height w/handle 4 ...
-
Clarke RS-16 DC - page 6
EN ENGLISH -6- Clarke ® American Sanders Operator's Manual (EN) - RS-16 /RS-16DC HOW TO PREPARE THE MACHINE FOR OPERATION UNCRATE THE MACHINE When the machine is delivered, carefully inspect the shipping carton and the machine for damage. If damage is evident, save the shipping carton so that it can be inspected. Contact the Clarke Customer S ...
-
Clarke RS-16 DC - page 7
EN ENGLISH Clarke ® American Sanders Operator's Manual (EN) - RS-16 /RS-16DC - 7 - 120 VOL T MACHINES Instructions for connection to the power supply and the electrical ground. This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric ...
-
Clarke RS-16 DC - page 8
EN ENGLISH -8- Clarke ® American Sanders Operator's Manual (EN) - RS-16 /RS-16DC Figure 4 HOW TO OPERATE THE MACHINE OPERATION (F igure 4) 1 Unwrap the Power Cord (5) and plug it into a properly grounded outlet. 2 Pull up on the Handle Release Compression Lever (4). Move the Operator Handle (6) downward until your arms are almost straight. Pu ...
-
Clarke RS-16 DC - page 9
EN ENGLISH Clarke ® American Sanders Operator's Manual (EN) - RS-16 /RS-16DC - 9 - TROUBLESHOOTING MACHINE WOBBLES DURING OPERATION • Defective pad... one side is more dense than the other. • Machine left sitting on pad for extended period of time causing pad to “take a set”. • Pad not “seated” properly into pad holder bristles. ...
-
Clarke RS-16 DC - page 10
RS-16 RS-16 DC Section II Part s and Service Manual (71121A) Clarke ® American Sanders Operator's Manual - RS-16 /RS-16DC - 27 - http://www.hardwood-floor-sanders.com ...
-
Clarke RS-16 DC - page 11
RS-16, RS-16 DC Assembly Drawing 1/06 -28- Clarke ® American Sanders Operator's Manual - RS-16 /RS-16DC 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 35 34 36 37 38 39 4 40 ...
-
Clarke RS-16 DC - page 12
Ref. Part No. Description Qty. Qty. 1 71119A Label 1 1 2 21074A Handle Front 1 1 3 10687A Module 1 1 4 80290A Screw, 10-32 x 3 / 8 44 5 80291A Washer, #10 1 1 6 21075A Handle Back 1 1 7 80284A Screw, 10-32 x 3 / 4 66 8 61373A H andle Tube 1 1 9 10304A Adaptor - 1 1 0 85815A Screw, 5 / 16 x 1¼ - 1 1 1 Ref.* Bushing (Equipped with 40789A) 1 1 1 2 40 ...
-
Clarke RS-16 DC - page 13
RS-16, RS-16 DC Motor Assembly Drawing, Parts List and Schematics 1/06 VOLTS / Hz 120 / 60 MOTOR PART NUMBER 40763A Part No. Description Qt y 53193A Rotor, 1.5HP, 60Hz 1 40694A Capacitor, Start 1 53191A Capacitor, Run 1 53189A Stator, 1.5HP, 60Hz 1 53360A Cover, Capacitor 2 40699A Cover, Wiring 2 53190A Switch, Start 2 53195A Centrifugal 4-Pole 60H ...
-
Clarke RS-16 DC - page 14
RS-16, RS-16 DC Gearbox Assembly Drawing & Parts List 1/06 VOLTS / Hz 120 / 60 GEARBOX PART NUMBER 53646A Ref. Part No. Description Qt y N I 503802 Grease - 14 Ounce Tube (1 ) 3 54408A Gear, Planet 3 4 54856A Gear, Ring 1 5 54858A Cover, Gearbox 1 6 56922A Retainer, Bearing 1 7 58312A Shaft, Planet 3 8 58313A Gear, Pinon 1 9 58314A Retainer, Sh ...
-
Clarke RS-16 DC - page 15
RS-16, RS-16 DC Machine Schematic 1/06 ...
Do you have a question concerning Clarke RS-16 DC?
Use the form below
If you did not solve your problem by using a manual Clarke RS-16 DC, ask a question using the form below. If a user had a similar problem with Clarke RS-16 DC it is likely that he will want to share the way to solve it.