English dropdown-ico

Manual Orion Car Audio XTR5001

102 pages 1.55 mb
Download

Go to site of 102

Summary
  • Orion Car Audio XTR5001 - page 1

    Amplifier MODEL XTR5001 XTR10001 XTR15001 OWNER'S MANUAL ...

  • Orion Car Audio XTR5001 - page 2

    CONTENTS Introduction ............................................... 2 What’s in the Box .......................................... 2 Practice Safe Sound™ ....................................... 2 End Panel Layouts .......................................... 3 CEA Specifications .......................................... 4 Specifications ...... ...

  • Orion Car Audio XTR5001 - page 3

    © 2008 Dir ected El ectronics. All rights reserved. 2 INTRODUCTION Thank you for your purchase of Orion’s XTR5001, XTR10001, or XTR15001 power amplifier. Each Orion amplifier is designed to be the leader in its class offering the most power, advanced features, and extreme ease of use. In high-end sound systems or high SPL systems, Orion amplifie ...

  • Orion Car Audio XTR5001 - page 4

    © 2008 Dir ected El ectronics. All rights reserved. 3 END PANEL LAYOUTS XTR5001, XTR10001 and XTR15001 LPF L L R INPUT R OUTPU T FULL ON OFF 24dB 12dB COPY MAST ER GAIN 0° 180° SUB SO NIC OUT SLOPE BASS BOOST MIN MAX 30 HZ 250 HZ 0dB 18dB GAIN REM OTE PHASE POWER REM GND B+ 1 12 2 3 4 5 6 11 10 9 8 7 Bass Boost - 1. continuously adjusts from 0 t ...

  • Orion Car Audio XTR5001 - page 5

    © 2008 Dir ected El ectronics. All rights reserved. 4 +BAT 1. - connect this terminal through a FUSE or CIRCUIT BREAKER to the positive terminal of the vehicle battery or the positive ter- minal of an isolated audio system battery. WARNING: Always protect this power wire by installing a fuse or circuit breaker of the appropriate size within 12 inc ...

  • Orion Car Audio XTR5001 - page 6

    © 2008 Dir ected El ectronics. All rights reserved. 5 SPECIFICATIONS Amplifier Section XTR5001 XTR10001 XTR15001 Power Output 4 Ω (Watts) * 150 x 1 300 x 1 400 x 1 Power Output 2 Ω (Watts) ** 300 x 1 600 x 1 800 x 1 Power Output 1 Ω (Watts) 600 x 1 1200 x 1 1600 x 1 Amplifier Efficiency 80% 80% 80% Signal to Noise ratio at rated output power an ...

  • Orion Car Audio XTR5001 - page 7

    © 2008 Dir ected El ectronics. All rights reserved. 6 AMPLIFIER SETTINGS Signal Input and Output Configurations The input section of the amplifier consists of a phase switch that sets the output configuration, subsonic switch, gain controls, low pass crossovers controls, Bass Boost, and RCA inputs. The input section makes it easy to adapt this amp ...

  • Orion Car Audio XTR5001 - page 8

    © 2008 Dir ected El ectronics. All rights reserved. 7 Figure 3 Figura 3 Abbildung 3 Figure 4 Figura 4 Abbildung 4 NOTE: The first graph is the response; the second graph is the driver excursion. These designations apply to the following graphs as well. Sealed Example High-Pass Set at 20Hz This sealed example is the same 12-inch woofer in the recom ...

  • Orion Car Audio XTR5001 - page 9

    © 2008 Dir ected El ectronics. All rights reserved. 8 Sealed Example High-Pass Set at 30Hz In this example, the frequency has been increased to 30 Hz. Up to 6 dB of boost is capable at this frequency. With +6dB of boost, the woofer has more output down to 23 Hz. The overall usable output is increased. Figure 7 Figura 7 Abbildung 7 Figure 8 Figura ...

  • Orion Car Audio XTR5001 - page 10

    © 2008 Dir ected El ectronics. All rights reserved. 9 Internal Crossover Configurations The crossover section of the Orion XTR5001, XTR10001, and XTR15001 amplifiers is continuously variable and extremely flexible. In addition to the variable built-in low-pass filters, the high-pass crossover incor- porates the Bass Boost feature. This circuit is ...

  • Orion Car Audio XTR5001 - page 11

    © 2008 Dir ected El ectronics. All rights reserved. 10 AMPLIFIER WIRING Power Connections for the XTR5001, XTR10001 and XTR15001 Power connections accept up to 4 AWG wire. • 4 AWG power and ground wire recommended for optimal per- • formance. Connect 12V+ to the battery through fuse holder. This connec- • tion provides +12V main pow ...

  • Orion Car Audio XTR5001 - page 12

    © 2008 Dir ected El ectronics. All rights reserved. 11 Bridging (strapping) For bridging into a single speaker load, the Orion XTR5001, XTR10001 and XTR15001 have the ability to be bridged with another amplifier of the same model. To do this you must utilize the MASTER/COPY switch settings. For the MASTER amplifier, set the switch setting to MASTE ...

  • Orion Car Audio XTR5001 - page 13

    © 2008 Dir ected El ectronics. All rights reserved. 12 AMPLIFIER INSTALLATION Choosing Mounting Locations The location of your amplifier will depend on several important issues. Due to the low profile size of the Orion amplifiers, there are many possible installation locations that will yield satisfactory amplifier performance. Always mount the am ...

  • Orion Car Audio XTR5001 - page 14

    © 2008 Dir ected El ectronics. All rights reserved. 13 Power for systems with a single amplifier can be supplied by most auto- motive electrical systems. Systems with multiple amplifiers may require a higher capacity battery, alternator or the use of a storage capacitor. We strongly recommend the use of a Directed Audio Essentials power capacitor ...

  • Orion Car Audio XTR5001 - page 15

    © 2008 Dir ected El ectronics. All rights reserved. 14 Step By Step Installation NOTE: Connect all input, power and speaker connections to amplifier before mounting the amplifier in its final location. Determine the location for the amplifier. Refer to the 1. Choosing Mounting Locations section of this manual for detailed informa- tion. Decide on ...

  • Orion Car Audio XTR5001 - page 16

    © 2008 Dir ected El ectronics. All rights reserved. 15 SET UP AND TROUBLESHOOTING Testing the System After you have completed the installation, you need to test the system. This will help ensure years of trouble-free operation. Please refer to the listed steps below when testing the sound of your Orion system. Check all the wiring connections to b ...

  • Orion Car Audio XTR5001 - page 17

    © 2008 Dir ected El ectronics. All rights reserved. 16 slig ht dis tort ion and turn the level contro l back slig htly for an undi storted output. D epen din g on y our s yste m, the mi drange a nd twee ter outpu t may be on the same out put cha nnels. Turn up the level control corresponding to the tweeter output 6. until you hear slight distortio ...

  • Orion Car Audio XTR5001 - page 18

    © 2008 Dir ected El ectronics. All rights reserved. 17 Reverse Polarity: • Any instance when the battery polarity or wires from the battery to the amplifier are reversed. Thermal LED: This LED lights up red if the amplifier overheats. An amplifier can thermal many different ways and below is a description of reasons the amplifier could engage ...

  • Orion Car Audio XTR5001 - page 19

    © 2008 Dir ected El ectronics. All rights reserved. 18 Troubleshooting Tips Symptom Probable Cause Action To Take No output Low or no remote turn-on Check remote turn-on voltage at voltage amplifier and repair as needed. Fuse blown Check power wire's integrity and check for speaker shorts. Fix as needed and replace fuse. Power wires not conn ...

  • Orion Car Audio XTR5001 - page 20

    © 2008 Dir ected El ectronics. All rights reserved. 19 Symptom Probable Cause Action To Take Speaker not connected to amplifier properly . Check speaker wires and repair or replace as needed. Refer to the Speaker Connections section of this manual for detailed instructions Internal crossover not set properly for speakers Readjust crossovers. Refe ...

  • Orion Car Audio XTR5001 - page 21

    © 2008 Dir ected El ectronics. All rights reserved. 20 ...

  • Orion Car Audio XTR5001 - page 22

    © 2008 Dir ected El ectronics. T ous droits réservés. 21 Français FRANÇAIS DISPOSITION DES PANNEAUX LATÉRAUX XTR5001, XTR10001 et XTR15001 Voir la figure 1 à la page 3 Renforcement des graves: 1. réglage continu de 0 à 18 dB d’amplification centrée sur 45 Hz. Gain: 2. réglage continu jusqu’à la pleine puissance de sortie. Entrée RC ...

  • Orion Car Audio XTR5001 - page 23

    © 2008 Dir ected El ectronics. T ous droits réservés. 22 GND: 3. Borne de retour de l’alimentation. Raccorder directement cette borne au châssis métallique du véhicule, avec un fil le plus court possible. Toujours utiliser un fil de section au moins égale à celle du fil d’alimentation de (+) 12 volts. En cas de présence de peinture ou ...

  • Orion Car Audio XTR5001 - page 24

    © 2008 Dir ected El ectronics. T ous droits réservés. 23 Français CARACTÉRISTIQUES TECHNIQUES Section amplificateur XTR5001 XTR10001 XTR15001 Puissance de sortie 4 ohms (watts)* 150 x 1 300 x 1 400 x 1 Puissance de sortie 2 ohms (watts)** 300 x 1 600 x 1 800 x 1 Puissance de sortie 1 ohm (watts) 600 x 1 1200 x 1 1600 x 1 Rendement amplifi- cat ...

  • Orion Car Audio XTR5001 - page 25

    © 2008 Dir ected El ectronics. T ous droits réservés. 24 RÉGLAGES DE L’AMPLIFICATEUR Configurations d’entrée et de sortie du signal La section d’entrée de l’amplificateur comprend un commutateur de phase qui définit la configuration de sortie, un commutateur subso- nique, des réglages du gain, du filtre passe-bas et de renforcement ...

  • Orion Car Audio XTR5001 - page 26

    © 2008 Dir ected El ectronics. T ous droits réservés. 25 Français REMARQUE : Le premier graphique montre la réponse; le second représente la course du haut-parleur. C’est également le cas pour les graphiques suivants. Voir les figures 3 et 4 à la page 7 Réglage passe-haut à 20 Hz dans le cas d’un cais- son clos Dans cet exemple, le m? ...

  • Orion Car Audio XTR5001 - page 27

    © 2008 Dir ected El ectronics. T ous droits réservés. 26 ants. Le niveau sonore est défini par le réglage du gain de sortie de l’amplificateur maître. Configuration des filtres internes La section de filtrage des amplificateurs Orion XTR5001, XTR10001 et XTR15001 permet un réglage continu et extrêmement flexible. Outre les filtres passe-b ...

  • Orion Car Audio XTR5001 - page 28

    © 2008 Dir ected El ectronics. T ous droits réservés. 27 Français RACCORDEMENT DE L’AMPLIFICATEUR Raccordement de l’alimentation des amplificateurs XTR5001, XTR10001 et XTR15001 Les fils d’alimentation peuvent avoir une section maximale de • 22 mm2. Il est conseillé d’utiliser des fils d’alimentation et de masse de 22 • mm2 ...

  • Orion Car Audio XTR5001 - page 29

    © 2008 Dir ected El ectronics. T ous droits réservés. 28 REMARQUE : Pour obtenir les meilleurs résultats, raccorder les deux bornes haut-parleur négatives de l’amplificateur maître aux deux bornes négatives de l’amplificateur esclave avec des fils d’au moins 3,3 mm2 de section. Amplificateur maître, Amplificateur esclave Voir la figur ...

  • Orion Car Audio XTR5001 - page 30

    © 2008 Dir ected El ectronics. T ous droits réservés. 29 Français endroit où il risque d’être mouillé. Monter l’amplificateur de façon à ce que les fils ne subissent pas d’efforts de traction. Faire cheminer les fils de façon à ce qu’ils ne soient pas éraflés, pincés ou endommagés. Le fil d’alimentation +12 V doit être pro ...

  • Orion Car Audio XTR5001 - page 31

    © 2008 Dir ected El ectronics. T ous droits réservés. 30 Installation pas à pas REMARQUE : Raccorder tous les fils d’entrées, d’alimentation et de haut-parleurs à l’amplificateur avant de monter celui-ci à son emplace- ment définitif. Déterminez l’emplacement de l’amplificateur. Pour obtenir des 1. informations détaillées, repo ...

  • Orion Car Audio XTR5001 - page 32

    © 2008 Dir ected El ectronics. T ous droits réservés. 31 Français RÉGLAGE ET RÉSOLUTION DES PROBLÈMES Essai du système Une fois l’installation terminée, vous devez essayer le système. Cela aidera à obtenir des années de fonctionnement sans problème. La procédure ci-dessous indique comment effectuer les essais de son du système Orio ...

  • Orion Car Audio XTR5001 - page 33

    © 2008 Dir ected El ectronics. T ous droits réservés. 32 que vous entendiez une légère distorsion, puis revenez un peu en arrière pour obtenir un son sans distorsion. Dans certains systèmes, les sorties haut-parleurs de médiums et haut-parleurs d’aigus sont sur les mêmes canaux de sortie. Augmentez le volume correspondant à la sortie ha ...

  • Orion Car Audio XTR5001 - page 34

    © 2008 Dir ected El ectronics. T ous droits réservés. 33 Français l’amplificateur au circuit électrique sont sales ou corrodées. Surtension: Le dispositif de charge du véhicule fournit trop • de tension par rapport à la tension continue nominale de l’amplificateur. Cela se produit en général en cas de problème avec le circuit é ...

  • Orion Car Audio XTR5001 - page 35

    © 2008 Dir ected El ectronics. T ous droits réservés. 34 Conseils de dépannage Symptôme Cause probable Intervention Pas de son Mise en marche à distance faible ou absente Vérifier la tension de mise en marche à distance au niveau de l’amplificateur et réparer si besoin Fusible coupé Vérifier l’état des fils d’alimentation et l ...

  • Orion Car Audio XTR5001 - page 36

    © 2008 Dir ected El ectronics. T ous droits réservés. 35 Français Symptôme Cause probable Intervention Impédance trop faible pour l’amplificateur Vérifier l’impédance du haut-parleur . Si elle est inférieure à 1 ohm, modifier la configuration de câblage des haut-parleurs pour obtenir une impédance plus élevée. Fils de haut-parleu ...

  • Orion Car Audio XTR5001 - page 37

    © 2008 Dir ected El ectronics. T ous droits réservés. 36 Symptôme Cause probable Intervention Fusible utilisé de calibre inférieur à la valeur recommandée Remplacer par un fusible du bon calibre. Courant réel supérieur au calibre du fusible Vérifier l’impédance du haut-parleur . Si elle est inférieure à 1 ohm, modifier la configu ...

  • Orion Car Audio XTR5001 - page 38

    © 2008 Dir ected El ectronics. Reservados todos los derechos . 37 Español ESPAÑOL DISPOSICIONES DEL P ANEL DE EXTREMO XTR5001, XTR10001 y XTR15001 Vea la figura 1 en la página 3 Refuerzo de bajos (BASS BOOST): 1. Ajusta la amplificación continu- amente de 0 a 18 dB centrada en 45 Hz. Amplificación (GAIN): 2. Salida de potencia total con ajust ...

  • Orion Car Audio XTR5001 - page 39

    © 2008 Dir ected El ectronics. Reservados todos los derechos . 38 Adapter {P/N ORRPA}) para suministrar una señal de encendido a distancia. NO conecte esta terminal a un voltaje constante de (+) 12 V. Conexión de retorno de alimentación (GND): 3. Conecte esta ter- minal directamente a la plancha de metal del chasis del vehículo con un cable lo ...

  • Orion Car Audio XTR5001 - page 40

    © 2008 Dir ected El ectronics. Reservados todos los derechos . 39 Español ESPECIFICACIONES Sección de amplifi- cador XTR5001 XTR10001 XTR15001 Potencia de salida 4 Ω , (W) * 150 x 1 300 x 1 400 x 1 Potencia de salida 2 Ω (W) ** 300 x 1 600 x 1 800 x 1 Potencia de salida 1 Ω (W) 600 x 1 1200 x 1 1600 x 1 Eficiencia del ampli- ficador 80% 80% 8 ...

  • Orion Car Audio XTR5001 - page 41

    © 2008 Dir ected El ectronics. Reservados todos los derechos . 40 CONFIGURACIONES DEL AMPLIFICADOR Configuraciones de entrada y salida de señal La sección de entrada del amplificador tiene un selector de fase, que fija la configuración de salida, un selector subsónico, controles de amplificación, controles del crossover de pasabajas, refuerzo ...

  • Orion Car Audio XTR5001 - page 42

    © 2008 Dir ected El ectronics. Reservados todos los derechos . 41 Español presenta el desplazamiento lineal del excitador. Estas convenciones se aplican también a los gráficos siguientes. Vea las figuras 3 y 4 en la página 7 Caja sellada, pasaaltas en 20 Hz En este ejemplo, el woofer de 12 plg. que se encuentra en la caja sellada recomendada e ...

  • Orion Car Audio XTR5001 - page 43

    © 2008 Dir ected El ectronics. Reservados todos los derechos . 42 y XTR15001 es continuamente variable y extremadamente flexible. Además de los filtros variables de pasabajas integrados, el crossover de pasaaltas incorpora la característica de refuerzo de bajos. Este circuito ha sido diseñado para optimizar el rendimiento de los subwoofers Orio ...

  • Orion Car Audio XTR5001 - page 44

    © 2008 Dir ected El ectronics. Reservados todos los derechos . 43 Español CABLEADO DEL AMPLIFICADOR Conexiones de alimentación de los amplificadores XTR5001, XTR10001 y XTR15001 Las conexiones de alimentación aceptan cable de hasta calibre • 4 AWG. Se recomienda cable de conexión a tierra y cable de alimentación • de calibre 4 AWG p ...

  • Orion Car Audio XTR5001 - page 45

    © 2008 Dir ected El ectronics. Reservados todos los derechos . 44 ADVERTENCIA: La impedancia del altavoz no debe ser menos de 2 Ω . Vea el diagrama que se muestra abajo. NOTA: Para obtener los mejores resultados, conecte las dos terminales de altavoz negativas del amplificador maestro a las dos terminales negativas del amplificador esclavo con ca ...

  • Orion Car Audio XTR5001 - page 46

    © 2008 Dir ected El ectronics. Reservados todos los derechos . 45 Español dañados de ninguna manera. El cable de alimentación de +12 V debe tener un fusible lo más cerca posible de la terminal de la batería, idealmente a menos de 12 plg. de tal terminal. Utilice fusibles o interruptores automáticos del valor nominal recomendado en la secció ...

  • Orion Car Audio XTR5001 - page 47

    © 2008 Dir ected El ectronics. Reservados todos los derechos . 46 Instalación paso a paso NOTA: Haga todas las conexiones de entrada, alimentación y altavoces antes de instalar el amplificador en su posición final. Determine la ubicación del amplificador. Consulte la sección 1. Selección de ubicaciones de montaje de este manual para ver info ...

  • Orion Car Audio XTR5001 - page 48

    © 2008 Dir ected El ectronics. Reservados todos los derechos . 47 Español CONFIGURACIÓN Y DETECCIÓN Y REPARACIÓN DE AVERÍAS Prueba del sistema Después de terminar la instalación, es necesario poner a prueba el sistema. Esto contribuirá a garantizar años de funcionamiento sin problemas. Consulte la lista de pasos que aparece abajo cuando p ...

  • Orion Car Audio XTR5001 - page 49

    © 2008 Dir ected El ectronics. Reservados todos los derechos . 48 una ligera distorsión y luego baje levemente el control de nivel hasta que la distorsión desaparezca. Dependiendo del sistema, la salida de altavoz de frecuencias medias y de tweeter puede estar en los mismos canales de salida. Suba el control de nivel correspondiente a la salida ...

  • Orion Car Audio XTR5001 - page 50

    © 2008 Dir ected El ectronics. Reservados todos los derechos . 49 Español Exceso de voltaje: El sistema de carga del vehículo está suminis- • trando demasiado voltaje a las entradas nominales de corriente continua del amplificador. Por lo general, esto ocurre cuando hay un problema con el sistema eléctrico. Apague la unidad fuente cuando ...

  • Orion Car Audio XTR5001 - page 51

    © 2008 Dir ected El ectronics. Reservados todos los derechos . 50 Sugerencias de detección y reparación de averías Síntoma Causa probable Medidas a tomar No hay salida El encendido a distancia está bajo o no funciona Verifique el voltaje de encendido a distancia en el amplificador de voltaje y repárelo según sea necesario. Fusible quemado ...

  • Orion Car Audio XTR5001 - page 52

    © 2008 Dir ected El ectronics. Reservados todos los derechos . 51 Español Síntoma Causa probable Medidas a tomar La carga de impedancia al amplificador es de- masiado baja V erifique la carga de impedancia de los altavoces; si está por debajo de 1 Ω , vuelva a cablear los altavoces para lograr mayor impedancia. Cortocircuito en los cables de ...

  • Orion Car Audio XTR5001 - page 53

    © 2008 Dir ected El ectronics. Reservados todos los derechos . 52 Síntoma Causa probable Medidas a tomar El altavoz está quemado y tiene un cortocircuito en las salidas V erifique el sistema con altavoces que funcionen y repare o cambie los altav- oces quemados según sea necesario. ...

  • Orion Car Audio XTR5001 - page 54

    © 2008 Dir ected El ectronics. Alle Rechte vorbehalten . 53 Deutsch DEUTSCH LAYOUT DER ENDPLATTEN XTR5001, XTR10001 und XTR15001 Siehe Abbildung 1 auf Seite 3 Bass Boost 1. – kontinuierlich von 0 bis 18 dB einstellbar, um 45 Hz zentriert. Gain 2. – kontinuierliche Anpassung für volle Ausgangsleistung. RCA-Eingang 3. – zur Verwendung mit N-P ...

  • Orion Car Audio XTR5001 - page 55

    © 2008 Dir ected El ectronics. Alle Rechte vorbehalten . 54 Sie dieses Terminal NICHT an konstante (+) 12 Volt an. GND 3. - Rückleitung. Verbinden Sie diesen Anschluss direkt mit dem Karosserieblech und verwenden Sie hierzu einen möglichst kurzen Draht. Verwenden Sie immer Draht mit der gleichen oder größeren Stärke wie das (+) 12-Volt-Stromk ...

  • Orion Car Audio XTR5001 - page 56

    © 2008 Dir ected El ectronics. Alle Rechte vorbehalten . 55 Deutsch TECHNISCHE DATEN Verstärkerbereich XTR5001 XTR10001 XTR15001 Leistung 4 Ω (Watt)* 150 x 1 300 x 1 400 x 1 Leistung 2 Ω (Watt)** 300 x 1 600 x 1 800 x 1 Leistung 1 Ω (Watt) 600 x 1 1200 x 1 1600 x 1 Verstärker-Wirkungsgrad 80 % 80 % 80 % Rauschabstand bei Nennleistung und nied ...

  • Orion Car Audio XTR5001 - page 57

    © 2008 Dir ected El ectronics. Alle Rechte vorbehalten . 56 VERSTÄRKEREINSTELLUNGEN Signaleingangs- und -ausgangskonfigurationen Der Eingangsbereich des Verstärkers besteht aus einem Phasenschalter, der die Ausgangskonfiguration, den Subsonic- Schalt er, Verstä rkungsregl er, Tiefp ass-Crosso ver-Regler , Bass-Bo ost und RCA-Eingänge festlegt. ...

  • Orion Car Audio XTR5001 - page 58

    © 2008 Dir ected El ectronics. Alle Rechte vorbehalten . 57 Deutsch den Diagramme zu. Siehe Abbildung 3 und 4 auf Seite 7 Beispiel: Geschlossenes Gehäuse, Hochpassfilter bei 20 Hz Bei diesem Beispiel eines geschlossenen Gehäuses wird der gleiche 12-Zoll-Tieftöner im empfohlenen geschlossenen Gehäuse verwendet. Bei Einstellung auf 20 Hz ist bis ...

  • Orion Car Audio XTR5001 - page 59

    © 2008 Dir ected El ectronics. Alle Rechte vorbehalten . 58 Interne Crossover -Konfigurationen Die Crossover-Einheiten der Verstärker Orion XTR5001, XTR10001 und XTR15001 sind stufenlos einstellbar und extrem flexibel. Neben den variablen integrierten Tiefpassfiltern besitzt die Hochpass-Crossover- Einheit eine Bass-Boost-Funktion. Diese Schaltun ...

  • Orion Car Audio XTR5001 - page 60

    © 2008 Dir ected El ectronics. Alle Rechte vorbehalten . 59 Deutsch VERSTÄRKERVERKABELUNG Stromanschlüsse für den XTR5001, XTR10001 und XTR15001 Stromanschlüsse mit bis zu 4 AWG Drahtdicke. • 4 AWG Strom- und Erdungskabel für optimale Leistung emp- • fohlen. Durch Sicherungsfassung 12V+ an die Batterie anschließen. Dieser • An ...

  • Orion Car Audio XTR5001 - page 61

    © 2008 Dir ected El ectronics. Alle Rechte vorbehalten . 60 Lautsprecheranschlüsse am Master-Verstärker mit beiden negativen Lautsprecheranschlüssen am Slave-Verstärker, wobei Sie ein Kabel von mindestens 12 AWG verwenden. Master-Verstärker Slave-Verstärker Siehe Abbildung 10 auf Seite 11 VERSTÄRKERINSTALLATION W ahl der Einbaustelle Der Ei ...

  • Orion Car Audio XTR5001 - page 62

    © 2008 Dir ected El ectronics. Alle Rechte vorbehalten . 61 Deutsch Das +12V-Stromkabel muss möglichst nahe an der Batterie abgesich- ert werden, am besten weniger als 30 cm entfernt. Verwenden Sie die im Abschnitt Stromanschlüsse in dieser Anleitung aufgelisteten Sicherungen oder Trennschalter. HINWEIS: Vergewissern Sie sich, dass alle Geräte ...

  • Orion Car Audio XTR5001 - page 63

    © 2008 Dir ected El ectronics. Alle Rechte vorbehalten . 62 Schrittweise Installation HINWEIS : Schließen Sie alle Netz-, Eingangs- und Lautsprecherkabel an den Verstärker an, bevor Sie ihn am Einbauort installieren. Legen Sie den Einbauort des Verstärkers fest. Detaillierte 1. Informationen hierzu finden Sie im Abschnitt Wahl der Einbaustelle ...

  • Orion Car Audio XTR5001 - page 64

    © 2008 Dir ected El ectronics. Alle Rechte vorbehalten . 63 Deutsch EINSTELLUNG UND PROBLEMLÖSUNG Systemtest Nach Abschluss der Installation müssen Sie das System testen. Dadurch stellen Sie einen langen, problemlosen Betrieb sicher. Folgen Sie beim Test Ihres Orion-Systems bitte den untenstehenden Schritten. Prüfen Sie, ob alle Kabelanschlüss ...

  • Orion Car Audio XTR5001 - page 65

    © 2008 Dir ected El ectronics. Alle Rechte vorbehalten . 64 Drehen Sie den Pegelregler für den Hochtönerbereich höher, 6. bis Sie etwas Verzerrung hören, und senken ihn dann wieder etwas ab, so dass die Verzerrung verschwindet. Je nach System können sich der Mittel- und Hochtönerausgang auf den gleichen Ausgangskanälen befinden. Führen Sie ...

  • Orion Car Audio XTR5001 - page 66

    © 2008 Dir ected El ectronics. Alle Rechte vorbehalten . 65 Deutsch Bordnetz schmutzig oder korrodiert sind. Überspannung: Das Ladesystem des Fahrzeugs liefert zu viel • Spannung oder mehr, als der Gleichstromeingang des Verstärkers aufnehmen kann. Dies tritt meist dann auf, wenn ein Problem mit dem Bordnetz vorliegt. Schalten Sie das Autor ...

  • Orion Car Audio XTR5001 - page 67

    © 2008 Dir ected El ectronics. Alle Rechte vorbehalten . 66 Problemlösungen Symptom Mögliche Ursache Lösung Kein Sound Schwache oder fehlende Ferneinschaltung Prüfen Sie die Ferneinschaltungsspannung am Spannungsverstärker und stellen Sie diese ggf. richtig ein. Sicherung durchgebrannt Prüfen Sie das Stromkabel und etwaige Kurzschlüsse an L ...

  • Orion Car Audio XTR5001 - page 68

    © 2008 Dir ected El ectronics. Alle Rechte vorbehalten . 67 Deutsch Symptom Mögliche Ursache Lösung Lautsprecher nicht korrekt an Verstärker angeschlos- sen. Prüfen Sie die Lautsprecherkabel und reparieren oder ersetzen Sie sie ggf. Detaillierte Anweisungen finden Sie im Abschnitt Lautsprecheranschlüsse in dieser Anleitung. Interne Crossover- ...

  • Orion Car Audio XTR5001 - page 69

    © 2008 Dir ected El ectronics. Alle Rechte vorbehalten . 68 ...

  • Orion Car Audio XTR5001 - page 70

    © 2008 Dir ected El ectronics. T utti i diritti riservati . 69 Italiano ITALIANO LAYOUT DEI PANNELLI TERMINALI XTR5001, XTR10001 e XTR15001 Vedi Figura 1 a pagina 3 Amplificazione bassi 1. – Il guadagno può essere regolato con con- tinuità da 0 a 18 dB, alla frequenza centrale di 45 Hz. Guadagno 2. – Può essere regolato con continuità sino ...

  • Orion Car Audio XTR5001 - page 71

    © 2008 Dir ected El ectronics. T utti i diritti riservati . 70 + 12 volt costante. GND 3. – Connessione di ritorno dell’alimentazione. Questo ter- minale va collegato direttamente al telaio metallico del veicolo impiegando il cavo più corto possibile che permetta di realizzare la connessione. Adoperare sempre un cavo di sezione uguale o maggi ...

  • Orion Car Audio XTR5001 - page 72

    © 2008 Dir ected El ectronics. T utti i diritti riservati . 71 Italiano DA TI TECNICI Sezione amplificatore XTR5001 XTR10001 XTR15001 Uscita di potenza a 4 Ω (watt) * 150 x 1 300 x 1 400 x 1 Uscita di potenza a 2 Ω (watt) ** 300 x 1 600 x 1 800 x 1 Uscita di potenza a 1 Ω (watt) 600 x 1 1200 x 1 1600 x 1 Efficienza amplifica- tore 80% 80% 80% R ...

  • Orion Car Audio XTR5001 - page 73

    © 2008 Dir ected El ectronics. T utti i diritti riservati . 72 IMPOSTAZIONI DELL’AMPLIFICATORE Configurazione dei segnali d’ingresso e di uscita La sezione d’ingresso dell’amplificatore, che consiste di uno sfasatore per l’impostazione della configurazione dell’uscita, un selettore del filtro subsonico, comandi del guadagno, dei crosso ...

  • Orion Car Audio XTR5001 - page 74

    © 2008 Dir ected El ectronics. T utti i diritti riservati . 73 Italiano successivi. Vedi figure 3 e 4 a pagina 7 Esempio di cassa sigillata con filtr o passa-alto impostato a 20 Hz Il woofer di questo esempio è identico a quello dell’esempio prec- edente. Impostando il filtro a 20 Hz, è possibile amplificare i bassi fino a 6 dB. Con un’ampli ...

  • Orion Car Audio XTR5001 - page 75

    © 2008 Dir ected El ectronics. T utti i diritti riservati . 74 Configurazione dei crossover interni La sezione di crossover degli amplificatori XTR5001, XTR10001 e XTR15001 è regolabile in continuo ed è estremamente flessibile. Oltre ai filtri passa-basso regolabili di cui è dotato, il crossover passa-alto presenta la funzione di amplificazione ...

  • Orion Car Audio XTR5001 - page 76

    © 2008 Dir ected El ectronics. T utti i diritti riservati . 75 Italiano CABLAGGIO DELL’AMPLIFICATORE Connessioni di alimentazione per gli amplificatori XTR5001, XTR10001 e XTR15001 I terminali di alimentazione accettano un cavo di sezione mas- • sima pari a 4 AWG (21,1 mm2). Per ottenere prestazioni ottimali è raccomandabile adoperare un ? ...

  • Orion Car Audio XTR5001 - page 77

    © 2008 Dir ected El ectronics. T utti i diritti riservati . 76 per altoparlanti positivo dell’amplificatore secondario al terminale negativo (-) dell’altoparlante. ATTENZIONE . L’impedenza dell’altoparlante deve essere uguale o maggiore di 2 Ù. Vedere il diagramma seguente. NOTA: per ottenere risultati ottimali, collegare entrambi i termi ...

  • Orion Car Audio XTR5001 - page 78

    © 2008 Dir ected El ectronics. T utti i diritti riservati . 77 Italiano può essere proiettato con violenza sui passeggeri. Non collocare mai l’amplificatore in un punto in cui potrebbe bagnarsi; fissarlo in modo che i cavi a cui è collegato non vengano tirati, graffiati, compressi o danneggiati in qualunque altra maniera. Il cavo di alimentazi ...

  • Orion Car Audio XTR5001 - page 79

    © 2008 Dir ected El ectronics. T utti i diritti riservati . 78 Procedura di installazione NOTA: eseguire tutte le connessioni di ingresso, alimentazione e con gli altoparlanti prima della collocazione finale dell’amplificatore nel veicolo. Determinare l’ubicazione dell’amplificatore; per informazioni 1. dettagliate consultare la sezione Scel ...

  • Orion Car Audio XTR5001 - page 80

    © 2008 Dir ected El ectronics. T utti i diritti riservati . 79 Italiano IMPOSTAZIONE E SOLUZIONE DEI PROBLEMI Prova dell’impianto Una volta completata l’installazione occorre provare l’impianto Orion per accertarsi che funzioni senza problemi. Procedere come segue: Accertarsi che tutte le connessioni siano state eseguite corret- 1. tamente e ...

  • Orion Car Audio XTR5001 - page 81

    © 2008 Dir ected El ectronics. T utti i diritti riservati . 80 non si sente una leggera distorsione, quindi girare il comando del livello in modo da non sentirla più. Secondo il tipo di impianto, l’uscita del midrange e quella del tweeter potrebbero essere sugli stessi canali di uscita. Regolare con precisione il livello di uscita tra il midran ...

  • Orion Car Audio XTR5001 - page 82

    © 2008 Dir ected El ectronics. T utti i diritti riservati . 81 Italiano Spegnere l’unità di pilotaggio se si avvia il veicolo con una bat- teria esterna. Polarità inversa: scambio dei terminali della batteria o dei cavi • che vanno dalla batteria all’amplificatore. LED di surriscaldamento: un amplificatore può surriscaldare per i seg- ...

  • Orion Car Audio XTR5001 - page 83

    © 2008 Dir ected El ectronics. T utti i diritti riservati . 82 Soluzione dei problemi Sintomo Causa probabile Intervento necessario Uscita assente T ensione di accensione a distanza bassa o nulla Controllare il livello della tensione di accensione a distanza ed eseguire le riparazioni necessarie. Fusibile bruciato Controllare l’integrità del ca ...

  • Orion Car Audio XTR5001 - page 84

    © 2008 Dir ected El ectronics. T utti i diritti riservati . 83 Italiano Sintomo Causa probabile Intervento necessario Uscita distorta Sensibilità dell’amplificatore impostata su un livello troppo alto Regolare il guadagno; per istruzioni dettagliate consultare la sezione Rego- lazione dell’audio dell’impianto. Impedenza di carico dell’am ...

  • Orion Car Audio XTR5001 - page 85

    © 2008 Dir ected El ectronics. T utti i diritti riservati . 84 Sintomo Causa probabile Intervento necessario Fusibile di portata minore di quella raccoman- data Sostituirlo con un fusibile della giusta portata. Corrente effettiva maggiore della portata del fusibile Controllare l’impedenza di carico dell’amplificatore; se è minore di 1 Ω , m ...

  • Orion Car Audio XTR5001 - page 86

    © 2008 Dir ected El ectronics. T odos os dir eitos reservados . 85 Português PORTUGUÊS LAYOUTS DOS PAINÉIS XTR5001, XTR10001 e XTR15001 Ver figura 1 na página 3 Bass Boost (Intensificação de graves) 1. – faz o ajuste contínuo de 0 a 18 dB de intensificação centralizada em 45Hz. Gain (Ganho) 2. – ajuste contínuo para reprodução em p ...

  • Orion Car Audio XTR5001 - page 87

    © 2008 Dir ected El ectronics. T odos os dir eitos reservados . 86 a uma tensão de (+) 12 V constante. GND (Terra) 3. – conexão de retorno de potência. Conecte este terminal diretamente à placa do chassis do veículo, usando o fio de menor comprimento necessário para fazer a conexão. Sempre use fio da mesma bitola ou de bitola superior à ...

  • Orion Car Audio XTR5001 - page 88

    © 2008 Dir ected El ectronics. T odos os dir eitos reservados . 87 Português ESPECIFICAÇÕES Seção do amplificador XTR5001 XTR10001 XTR15001 Potência de saída 4 Ω (Watts) * 150 x 1 300 x 1 400 x 1 Potência de saída 2 Ω (Watts) ** 300 x 1 600 x 1 800 x 1 Potência de saída 1 Ω (Watts) 600 x 1 1200 x 1 1600 x 1 Eficiência do amplifi- ca ...

  • Orion Car Audio XTR5001 - page 89

    © 2008 Dir ected El ectronics. T odos os dir eitos reservados . 88 AJUSTES DO AMPLIFICADOR Configurações de entrada e saída dos sinais A seção de entrada do amplificador consiste em uma chave de seleção de fase que determina a configuração da saída, chave subsônica, con- troles de ganho, controles de crossovers passa-baixa, intensifica? ...

  • Orion Car Audio XTR5001 - page 90

    © 2008 Dir ected El ectronics. T odos os dir eitos reservados . 89 Português NOTA: O primeiro gráfico representa a resposta e o segundo o deslo- camento do driver. Essas designações também se aplicam aos próximos gráficos. Ver figuras 3 e 4 na página 7 Exemplo de caixa selada com passa-alta ajustado a 20 Hz Este exemplo é para o mesmo woo ...

  • Orion Car Audio XTR5001 - page 91

    © 2008 Dir ected El ectronics. T odos os dir eitos reservados . 90 dos filtros passa-baixa variáveis embutidos, o crossover passa-alta inclui o recurso de intensificação de graves. O circuito foi projetado para otimizar o desempenho dos subwoofers Orion em todos os tipos de caixas. Ao usar alto-falantes Orion, pequenos desvios das faixas de fre ...

  • Orion Car Audio XTR5001 - page 92

    © 2008 Dir ected El ectronics. T odos os dir eitos reservados . 91 Português CONEXÃO DOS CABOS DO AMPLIFICADOR Conexões elétricas do XTR5001, XTR10001 e XTR15001 As conexões de alimentação elétrica podem ser feitas com cabos • de bitola máxima de 4 AWG. Recomendamos cabos de alimentação e aterramento de 4 AWG • para maximizar ...

  • Orion Car Audio XTR5001 - page 93

    © 2008 Dir ected El ectronics. T odos os dir eitos reservados . 92 negativos de alto-falante do amplificador mestre aos dois terminais negativos do amplificador escravo usando um cabo de bitola mínima de 12 AWG. Amplificador mestre Amplificador escravo Ver figura 10 na página 11 INSTALAÇÃO DO AMPLIFICADOR Escolha de locais de instalação A lo ...

  • Orion Car Audio XTR5001 - page 94

    © 2008 Dir ected El ectronics. T odos os dir eitos reservados . 93 Português próximo possível do terminal da bateria. A distância ideal é de, no máximo, 30 cm. Use um fusível ou disjuntor do tamanho recomendado na seção Conexões para alimentação elétrica deste manual. NOTA: Certifique-se de que todos os equipamentos do sistema este- j ...

  • Orion Car Audio XTR5001 - page 95

    © 2008 Dir ected El ectronics. T odos os dir eitos reservados . 94 Instalação passo a passo NOTA: Faça todas as conexões de entrada, alimentação elétrica e dos alto-falantes ao amplificador antes de montar o amplificador no local definitivo. Determine o local de instalação do amplificador. Consulte as 1. informações detalhadas na seçã ...

  • Orion Car Audio XTR5001 - page 96

    © 2008 Dir ected El ectronics. T odos os dir eitos reservados . 95 Português AJUSTE E RESOLUÇÃO DE PROBLEMAS Como testar o sistema O sistema precisa ser testado após a instalação. Isso ajudará a garantir muitos anos de funcionamento sem problemas. Consulte as etapas descritas abaixo ao testar o som do sistema Orion. Verifique todas as conex ...

  • Orion Car Audio XTR5001 - page 97

    © 2008 Dir ected El ectronics. T odos os dir eitos reservados . 96 reprodução sem distorção. Dependendo do sistema, os sons produzidos pelos alto-falantes que reproduzem as freqüências médias e pelo tweeter podem estar nos mesmos canais de saída. Aumente o controle do volume de som do tweeter até ouvir 6. uma leve distorção e, em seguid ...

  • Orion Car Audio XTR5001 - page 98

    © 2008 Dir ected El ectronics. T odos os dir eitos reservados . 97 Português nais que conectam o amplificador ao sistema elétrico estiverem sujos ou corroídos. Sobretensão: O sistema de carregamento do veículo está for- • necendo tensão em excesso ou acima da capacidade nominal de entrada CC dos amplificadores. Isso normalmente ocorre ...

  • Orion Car Audio XTR5001 - page 99

    © 2008 Dir ected El ectronics. T odos os dir eitos reservados . 98 Sugestões para resolução de problemas Problema Provável causa Medida a ser tomada Nenhum som Acionamento remoto baixo ou inexistente V erifique a tensão do acionamento remoto no amplificador e repare con- forme necessário. Fusível queimado V erifique a integridade do cabo ...

  • Orion Car Audio XTR5001 - page 100

    © 2008 Dir ected El ectronics. T odos os dir eitos reservados . 99 Português Problema Provável causa Medida a ser tomada Carga de impedância ao amplificador muito baixa V erifique a carga de impedância dos alto-falantes. Se estiver abaixo de 1 Ω , reconecte os alto-falantes para obter impedância mais alta. Cabos dos alto-falantes em curto V ...

  • Orion Car Audio XTR5001 - page 101

    © 2008 Dir ected El ectronics. T odos os dir eitos reservados . 100 Problema Provável causa Medida a ser tomada O alto-falante queima com saídas em curto V erifique o sistema usando alto-falantes que funcionem e, se necessário, repare ou troque os alto-falantes com problema. ...

  • Orion Car Audio XTR5001 - page 102

    © 2009 Directed Electronics. All rights reserved. GXTR5001 2009-02 Vista, CA 92081 WWW .DIRECTED.COM Directed Electronics is committed to delivering world class quality products and services that excite and delight our customers. Directed Electronics is an ISO 9001 registered company . W ARRANTY LIMITED ONE-YEAR CONSUMER WARRANTY/*LIMITED TWO-YEAR ...

Manufacturer Orion Car Audio Category Car Amplifier

Documents that we receive from a manufacturer of a Orion Car Audio XTR5001 can be divided into several groups. They are, among others:
- Orion Car Audio technical drawings
- XTR5001 manuals
- Orion Car Audio product data sheets
- information booklets
- or energy labels Orion Car Audio XTR5001
All of them are important, but the most important information from the point of view of use of the device are in the user manual Orion Car Audio XTR5001.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Orion Car Audio XTR5001, service manual, brief instructions and user manuals Orion Car Audio XTR5001. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Orion Car Audio XTR5001.

Similar manuals

A complete manual for the device Orion Car Audio XTR5001, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Orion Car Audio XTR5001 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Orion Car Audio XTR5001.

A complete Orion Car Audio manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Orion Car Audio XTR5001 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Orion Car Audio XTR5001, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Orion Car Audio XTR5001, that we can find in the current document
3. Tips how to use the basic functions of the device Orion Car Audio XTR5001 - which should help us in our first steps of using Orion Car Audio XTR5001
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Orion Car Audio XTR5001
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Orion Car Audio XTR5001 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Orion Car Audio XTR5001?

Use the form below

If you did not solve your problem by using a manual Orion Car Audio XTR5001, ask a question using the form below. If a user had a similar problem with Orion Car Audio XTR5001 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)