English dropdown-ico

Manual Alesis M-EQ230

11 pages 6.64 mb
Download

Go to site of 11

Summary
  • Alesis M-EQ230 - page 1

    A lesis M-EQ 230 DUAL 1/3 OCTAVE PRECISION EQUALIZATION SYSTEM USERS MANUAL ...

  • Alesis M-EQ230 - page 2

    2 A lesis M-EQ 230 DUAL 1/3 OCTAVE PRECISION EQUALIZATION SYSTEM INTRODUCTION The A lesis MEQ-230 is a two channel, 30 band/channel, 1/3rd octave graphic equalizer which features a relay based power-up delay switching circuit to eliminate turn-on transients in sound systems. Each channel features 30 bands of 1/3rd octave equalization with ANSI and ...

  • Alesis M-EQ230 - page 3

    3 SECTION 1 DESCRIPTION OF CONTROLS FRONT PANEL 1/3 OCTAVE BAND FADER Each 1/3rd octave band is controlled by a center detented fader which provides a boost or cut of 12dB. There are 30 bands per channel. MASTER CHANNEL GAIN FADER Each channel has a Master Gain Fader which controls the system's input gain by ± 12dB. CHANNEL BYPASS SWITCH Each ...

  • Alesis M-EQ230 - page 4

    4 POWER JACK Accepts the +9VAC power from the M-EQ 230 Power Supply. This external supply keeps hum, noise, and ground loops to a minimum. SECTION 2 SET-UP INSTRUMENTS, MICROPHONES The A lesis M-EQ 230 has high impedance inputs that are ideally suited for use either with instruments or line level signals. Although microphones can be connected direc ...

  • Alesis M-EQ230 - page 5

    5 INDEPENDENT USE OF LEFT AND RIGHT CHANNELS The M-EQ 230 need not be used in a stereo mode since each channel is completely independent. In Figure 2 , the right channel is connected to the house sound system for room tuning while the left channel is connected to the on-stage monitor system for feedback control. FIGURE 2 INDEPENDENT USE OF LEFT AND ...

  • Alesis M-EQ230 - page 6

    6 INTERFACING VIA INSERT SENDS AND RETURNS Another way of interfacing the M-EQ 230 is to connect the unit directly to the insert send and return patch points (if your console has them) of the channel that is to be effected. See Figure 3 FIGURE 3 INTERFACING TO A MIXING CONSOLE VIA CHANNEL INSERTS Alesis 1622 MIXING CONSOLE M-EQ 230 INSERT RETURN IN ...

  • Alesis M-EQ230 - page 7

    7 SECTION 3 OPERATION POWER-UP When the power is first turned on, the automatic power-up delay circuit will mute the M-EQ 230 for 2 seconds. This is to prevent any possible turn-on transient signal from mixers, power amps, or outboard equipment from possibly damaging speakers. TO CONTROL FEEDBACK 1) Place all microphones in the positions where they ...

  • Alesis M-EQ230 - page 8

    8 B) For feedback control, the sliders of the M-EQ 230 should always be operated in the downward or cut position. FIGURE 4 CONTROLLING FEEDBACK A. Find the 2 major feedback frequencies (1 high, 1 low frequency) B. Slightly decrease adjacent bands. ROOM FEEDBACK FREQUENCIES ADJACENT BANDS SLIGHTLY DECREASED A. B. FOR INSTRUMENT TONAL CONTOURING 1) F ...

  • Alesis M-EQ230 - page 9

    9 the same as simply raising the volume level. In this case, do the following: 1) With the instrument playing, start by boosting 3 sliders at a time until the offending frequency area is found. (If the Clip LED should light, turn down the Input control) 2) Now, decrease the sliders until you are cutting the level instead of boosting. 3) Experiment ...

  • Alesis M-EQ230 - page 10

    10 Voice Fullness at 120Hz; Boominess at 200 to 240Hz; Presence at 5KHz; Sibilance at 7.5KHz; Air at 12 to 15KHz Harmonica Fat at 240Hz, bite at 3-5kHz Conga Re so nant ring at 200 to 240Hz; Presence and slap at 5KHz Whether used to alter the timbre of an instrument, control feedback, or improve speech intelligibility, it's important to know w ...

  • Alesis M-EQ230 - page 11

    SECTION 4 SPECIFICATIONS ELECTRICAL CHARACTERISTICS FREQUENCY RESPONSE 25Hz to 20kHz in 1/3 octave increments HARMONIC DISTORTION .004% @ 1KHz @ 0dBV INPUT NUMBER OF CHANNELS 2 NOMINAL LEVEL 0dBV MAXIMUM LEVEL +18dBV IMPEDANCE 1 M Ω OUTPUT NUMBER OF CHANNELS 2 MAXIMUM LEVEL +18dBV IMPEDANCE 2 4 0 Ω FRONT PANEL CONTROLS 30 Band, 1/3rd octave , ? ...

Manufacturer Alesis Category Stereo Equalizer

Documents that we receive from a manufacturer of a Alesis M-EQ230 can be divided into several groups. They are, among others:
- Alesis technical drawings
- M-EQ230 manuals
- Alesis product data sheets
- information booklets
- or energy labels Alesis M-EQ230
All of them are important, but the most important information from the point of view of use of the device are in the user manual Alesis M-EQ230.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Alesis M-EQ230, service manual, brief instructions and user manuals Alesis M-EQ230. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Alesis M-EQ230.

Similar manuals

A complete manual for the device Alesis M-EQ230, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Alesis M-EQ230 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Alesis M-EQ230.

A complete Alesis manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Alesis M-EQ230 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Alesis M-EQ230, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Alesis M-EQ230, that we can find in the current document
3. Tips how to use the basic functions of the device Alesis M-EQ230 - which should help us in our first steps of using Alesis M-EQ230
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Alesis M-EQ230
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Alesis M-EQ230 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Alesis M-EQ230?

Use the form below

If you did not solve your problem by using a manual Alesis M-EQ230, ask a question using the form below. If a user had a similar problem with Alesis M-EQ230 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)