English dropdown-ico

Manual Husqvarna Viking H Class E 10

32 pages Not applicable
Download

Go to site of 32

Summary
  • Husqvarna Viking H Class E 10 - page 1

    E10 USER’S GUIDE ...

  • Husqvarna Viking H Class E 10 - page 2

    This houshold sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594 IMPORT ANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always be followed, including the following: Read all instructions before using this household sewing machine. DANGER - T o reduce the risk of electric shock: • A s ...

  • Husqvarna Viking H Class E 10 - page 3

    Congratulations! As the owner of a new sewing machine, you will enjoy precision quality stitching on all types of fabrics, from multiple layers of denim to delicate silks. Y our sewing machine offers the ultimate in simplicity and ease of operation. For your safety and to fully enjoy the many advantages and ease of operation of your sewing machine, ...

  • Husqvarna Viking H Class E 10 - page 4

    4 LIST OF CONTENTS PRINCIP AL P ARTS OF THE MACHINE ....................................................................5 ACCESSORIES......................................................................................................... 7 FITTING THE SNAP-IN ACCESSORY BOX ............................................................. 8 CONNECTING ...

  • Husqvarna Viking H Class E 10 - page 5

    5 PRINCIP AL P ARTS OF THE MACHINE 1. Thread tension dial 2. Presser foot pressure 3. Thread take-up lever 4. Thread cutting 5. Presser foot 6. Needle plate 7. Accessories box 8. Bobbin stop 9. Stitch length dial 10. Stitch display 1 1. Reverse sewing lever ...

  • Husqvarna Viking H Class E 10 - page 6

    6 12. Spool pin 13. Bobbin winder 14. Hole for second spool pin 15. Hand wheel 16. Stitch selector dial 17. Power switch 18. Main plug socket 19. Bobbin thread guide 20. Upper thread guide 21. Handle 22. Presser foot lever ...

  • Husqvarna Viking H Class E 10 - page 7

    7 12 3 4 56 7 89 1 0 1 1 12 14 13 15 ACCESSORIES 1. All purpose foot 2. Zipper foot 3. Satin stitch foot 4. Blind hem foot 5 Buttonhole foot 6. L-screwdriver 7. Seam ripper/ brush 8. Oil bottle 9. Second spool pin 10. Spool holders (2x) 1 1. Pack of needles 12. Seam guide 13. Bobbins (3x) 14. Darning plate 15. Felt pad ...

  • Husqvarna Viking H Class E 10 - page 8

    8 FITTING THE SNAP-IN ACCESSOR Y BOX Keep the snap-in accessory box horizontal, and push it in the direction of the arrow . (1) T o open, lift up at the point of the arrow . (2) ...

  • Husqvarna Viking H Class E 10 - page 9

    9 1 3 CONNECTING THE MACHINE TO POWER SOURCE Connect the machine to a power source as illustrated. (1) A polarized plug must be used with the appropriate polarized outlet. (2) Attention: Unplug power cord when machine is not in use. Foot control Foot control regulates the sewing speed. (3) Attention: Consult a quali ¿ ed electrician if in doubt as ...

  • Husqvarna Viking H Class E 10 - page 10

    10 CHANGING THE BULB Attention: Disconnect the machine from the power supply by removing the plug from the main socket! Replace bulb with same type rated 10 watts (1 10-120V) or 15 watts (220-240V). - Loosen screw (A) as illustrated. (1) - Remove the cover (B). - Unscrew the bulb and ¿ t new one (C). (2) - Replace the cover and tighten screw . Sho ...

  • Husqvarna Viking H Class E 10 - page 11

    11 + - TWO-STEP PRESSER FOOT LEVER When sewing several layers or thick fabrics, the presser foot can be raised to extra high for easy positioning of the work. (A) The presser foot pressure of the machine has been pre-set and usually requires no readjustment for most fabrics (light-or-heavy weight). However , if you need to adjust the presser foot p ...

  • Husqvarna Viking H Class E 10 - page 12

    12 A TT ACHING THE PRESSER FOOT SHANK/ ANKLE Attaching the presser foot holder Raise the presser foot bar (a). (1) Attach the presser foot shank/ankle (b) as illustrated. Attaching the presser foot Lower the presser foot shank/ankle (b) until the cut-out (c) is directly above the pin on the foot (d). (2) Raise the lever (e). Lower the presser foot ...

  • Husqvarna Viking H Class E 10 - page 13

    13 WINDING THE BOBBIN Place thread and spool holder onto spool pin (1). - For smaller spools of thread place spool holder with small side next to spool (2). - Wind thread clockwise around bobbin winder tension discs (3). - Thread bobbin as illustrated and place on spindle (4). - Push bobbin to right (5). - Hold thread end (6). - Step on foot contro ...

  • Husqvarna Viking H Class E 10 - page 14

    14 INSERTING THE BOBBIN When inserting or removing the bobbin, the foot and needle must be fully raised. 1. Open the hinged cover . 2. Hold the bobbin case with one hand. Insert the bobbin so that the thread runs in a clockwise direction (arrow). 3. Put the thread under the tension spring. 4. Hold the bobbin case by the hinged latch. 5. Insert it i ...

  • Husqvarna Viking H Class E 10 - page 15

    15 INSERTING THE NEEDLE Change the needle regularly , especially if it is showing signs of wear and causing problems. Insert the needle following the illustrated instructions. A. Loosen the needle clamp screw and tighten again after inserting the new needle. (1) B. The À at side of the needle shaft should be towards the back. C/D.Insert the needle ...

  • Husqvarna Viking H Class E 10 - page 16

    16 THREADING THE UPPER THREAD Threading is simple but it is important to thread correctly to prevent sewing problems could result. - Start by raising the needle to its highest point (1), and also raise the presser foot to release the tension discs. (2) Attention: For safety , it is strongly suggested you turn off the power before threading. - Lift ...

  • Husqvarna Viking H Class E 10 - page 17

    17 THREAD TENSION Basic thread tension setting: “4” T o increase the tension, turn the dial to the next number up. T o reduce the tension, turn the dial to the next number down. A. Normal thread tension - upper and bobbin thread join in fabric B. Upper thread tension too loose - upper thread “loops” on the underside of fabric C. Upper threa ...

  • Husqvarna Viking H Class E 10 - page 18

    18 BRINGING UP THE BOBBIN THREAD Hold the upper thread with the left hand. T urn the handwheel towards you until the needle is raised. (1) Pull on the upper thread to bring the bobbin thread up through the stitch plate hole. Place both threads to the back under the presser foot. (2) ...

  • Husqvarna Viking H Class E 10 - page 19

    19 REVERSE SEWING At the end of a seam, press down the reverse sewing lever . Sew a few reverse stitches to “the tie off” the thread ends. Release the lever and the machine will sew forwards again. (1/A) REMOVING THE F ABRIC T urn the handwheel toward you to bring the thread take up lever to its highest position, raise the presser foot and remo ...

  • Husqvarna Viking H Class E 10 - page 20

    20 MA TCHING NEEDLE / F ABRIC / THREAD NEEDLE, F ABRIC SELECTION NEEDLE SIZE F ABRICS THREAD 9-1 1(65-75) Lightweight fabrics-thin cottons, voile, silk , muslin, interlocks, cotton knits, tricots, jerseys, crepes, woven polyester , shirt & blouse fabrics. Light-duty thread in cotton, nylon or polyester . 12(80) Medium weight fabrics-cotton, sat ...

  • Husqvarna Viking H Class E 10 - page 21

    21 STRAIGHT STITCHING Straight stitching center needle position T urn the stitch selector dial so that the “A” appears in the stitch display window . Snap on the standard presser foot. Adjust the stitch length by turning the stitch length dial to the desired stitch length. 2.5 is standard stitch length. T o get the reinforced triple straight st ...

  • Husqvarna Viking H Class E 10 - page 22

    22 ZIGZAG STITCHING T urn the stitch selector dial so that the stitch display shows “C”-zig- zag. T urning the stitch selector dial will increase or decrease the zig zag width. Snap on the standard foot. Function of stitch length dial while zigzaging The density of zigzag stitches increase as the setting of stitch length dial approaches “0” ...

  • Husqvarna Viking H Class E 10 - page 23

    23 HOW TO SEW BUTT ONHOLES Preparation Select buttonhole with the stitch Selection dial. Snap on The buttonhole foot. Adjust the stitch length dial between “0.5” - “1”. The density of the stitch depends on thickness of the fabric. Note: Always test sew a buttonhole. T o prepare the fabric Measure the diameter of the button and add 0.3 cm (1 ...

  • Husqvarna Viking H Class E 10 - page 24

    24 Tips - Slightly reduce upper thread tension to produce a satin stitch on top. - Place stabilizer underneath for ¿ ne and stretchy fabrics. - It is best to sew a cord for a buttonhole on a stretch or knit fabrics. The buttonhole colomns should sew over the cord. (5) ...

  • Husqvarna Viking H Class E 10 - page 25

    25 BLIND HEM For hems, curtains, trousers, skirts, etc. Select Blind hem for stretch fabrics. Select Blind hem for woven fabrics. Snap on Blind hem foot. (1) Stitch length 1.5-2.5 Note: It takes practice to sew blind hems. Always make a sewing test ¿ rst. Fold the fabric as illustrated with the wrong side up. (2) Place the fabric under the foot. T ...

  • Husqvarna Viking H Class E 10 - page 26

    26 ZIPPERS AND PIPING Set the machine as illustrated. (1) The zipper foot can be snapped onto the right or left, depending on which side of the foot you are going to place against the zipper or piping. (2) T o sew past the zipper pull, lower the needle into the fabric, raise the presser foot and push the zipper pull behind the presser foot. Lower t ...

  • Husqvarna Viking H Class E 10 - page 27

    27 3-STEP ZIG-ZAG Sewing on lace and elastic, darning, mending, ¿ nishing edges. Set the machine as illustrated. (1) Patching: Place the patch in position and stitch around edges. The stitch length can be shortened to produce very close stitches. (A) When mending tears, it is advisable to use a piece of backing fabric to reinforce. The stitch dens ...

  • Husqvarna Viking H Class E 10 - page 28

    28 STITCH SELECTION T riple straight stitch: (1) For reinforced seams. T urn the stitch length dial to “S1”. The machine sews two stitches forwards and one stitch backwards. This gives triple reinforcement. T riple zig-zag: (2) For hardwearing seams, hems and decorative seams. T urn the stitch length dial to “S1”. T riple zig-zag is suitabl ...

  • Husqvarna Viking H Class E 10 - page 29

    29 Attention: Disconnect the machine from the electricity supply by removing the plug from the main socket. When cleaning the machine, it must always be disconnected from the electricity supply . Remove the stitch plate T urn the handwheel until the needle is fully raised. Open the hinged front cover and unscrew the needle plate screw withe the scr ...

  • Husqvarna Viking H Class E 10 - page 30

    30 TROUBLE SHOOTING GUIDE Problem Cause Correction Upper thread breaks 1. The machine is not threaded correctly . 2. The thread tension is too tight. 3. The thread is too thick for the needle. 4. The needle is not inserted correctly . 5. The thread is wound around the spool holder pin. 6. The needle is damaged. 1. Rethread the machine. 2. Reduce th ...

  • Husqvarna Viking H Class E 10 - page 31

    Please note that on disposal, this product must be safely recycled in accordance with relevant National legislation relating to electrical/electronic products. If in doubt please contact your retailer for guidance ...

  • Husqvarna Viking H Class E 10 - page 32

    VSM Group AB • SE-561 84 Huskvarna • SWEDEN www .husqvarnaviking.com 412 97 80 - 26C • English • Inhouse production • © 2005 VSM Group AB • All statements valid at time of printing • Printed in Sweden on environmental-friendly paper • ...

Manufacturer Husqvarna Category Sewing Machine

Documents that we receive from a manufacturer of a Husqvarna Viking H Class E 10 can be divided into several groups. They are, among others:
- Husqvarna technical drawings
- Viking H Class E 10 manuals
- Husqvarna product data sheets
- information booklets
- or energy labels Husqvarna Viking H Class E 10
All of them are important, but the most important information from the point of view of use of the device are in the user manual Husqvarna Viking H Class E 10.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Husqvarna Viking H Class E 10, service manual, brief instructions and user manuals Husqvarna Viking H Class E 10. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Husqvarna Viking H Class E 10.

Similar manuals

A complete manual for the device Husqvarna Viking H Class E 10, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Husqvarna Viking H Class E 10 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Husqvarna Viking H Class E 10.

A complete Husqvarna manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Husqvarna Viking H Class E 10 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Husqvarna Viking H Class E 10, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Husqvarna Viking H Class E 10, that we can find in the current document
3. Tips how to use the basic functions of the device Husqvarna Viking H Class E 10 - which should help us in our first steps of using Husqvarna Viking H Class E 10
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Husqvarna Viking H Class E 10
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Husqvarna Viking H Class E 10 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Husqvarna Viking H Class E 10?

Use the form below

If you did not solve your problem by using a manual Husqvarna Viking H Class E 10, ask a question using the form below. If a user had a similar problem with Husqvarna Viking H Class E 10 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)