English dropdown-ico

Manual Star Micronics TUP992-24

8 pages Not applicable
Download

Go to site of 8

Summary
  • Star Micronics TUP992-24 - page 1

    TUP900 Quick Setup Guide Thank you for choosing Star Micronics as your provider for printing solutions. Unpacking the Unit Contents a. Printer b. Paper Shaft c. 1” Paper Core Adapter d. 2” Paper Core Adapter e. 3” Paper Core Adapter f. Shaft Weight* g. Interface Mounting Screws(2)* h. Paper Core Adapter Screws(2) *Not Pictured Assembly – In ...

  • Star Micronics TUP992-24 - page 2

    Assembly – Paper Roll Setup It is necessary to adjust the paper roll holder for the width of the paper you use. If the setting position is in correct, the paper roll will be supplied impro perly to the mechanism which in turn causes paper transport problems. Thus, it is should be properly adjusted. The following table shows the pap er roll holder ...

  • Star Micronics TUP992-24 - page 3

    Assembly – Paper Roll Setup Continued Once the paper roll holder is properly configured for the roll to be used, simply insert the roll holder into the paper core as show. Be sure that the cut end of the paper roll is properly cut to ensure proper paper loading. To aid in the installation of the paper roll, th e TUP900’s mechanism is hinged to ...

  • Star Micronics TUP992-24 - page 4

    Assembly – Connecting the Power Supply The TUP900 requires a 24 VDC power source for proper operation. Star recommends use of the PS60L-24A (pt. no. 30781440) universal power supply. The PS60L-24A power supply is supplied with a US standard grounded power cord. The printer end of the power supply cable is the mating Hoshiden connector for the TUP ...

  • Star Micronics TUP992-24 - page 5

    To begin, simply select the printer for which you are in stalling the driver. In this case; we are installing the TUP992 (TUP900 series kiosk printer with presenter attached). Next, select the port to which the printer is connected. Here we will select the “LPT1” parallel printer port. ...

  • Star Micronics TUP992-24 - page 6

    Once the printer and port have been selected, an eas ily recognizable name for the printer should be assigned. This name will show up in the Printe r and Faxes dialogue of the Windows Control Panel. The Star Language Monitor allows for reporting of the status of the printer. (P aper out, paper low, etc.) Installation of this com ponent is optional, ...

  • Star Micronics TUP992-24 - page 7

    Printing a test page will allow for confirmation t hat correct installation and communication are established and working properly. Installation is complete. Click “Yes” to let the inst aller restart the system. Click “N o” to restart the system manually. Testing – Printing a Printer Self-Test Page The TUP900, like all Star printers, has ...

  • Star Micronics TUP992-24 - page 8

    Additional Documentation This “Quick Setup Guide” is a condensed summary of the information availa ble from all of the manuals available on the provided CD. Listed below are the manuals available on the CD: TUP900 Specification Manual (tup900sm.pdf) – This manual provides detailed specification for the configuration and use of the TU P900. Al ...

Manufacturer Star Micronics Category Label Printer

Documents that we receive from a manufacturer of a Star Micronics TUP992-24 can be divided into several groups. They are, among others:
- Star Micronics technical drawings
- TUP992-24 manuals
- Star Micronics product data sheets
- information booklets
- or energy labels Star Micronics TUP992-24
All of them are important, but the most important information from the point of view of use of the device are in the user manual Star Micronics TUP992-24.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Star Micronics TUP992-24, service manual, brief instructions and user manuals Star Micronics TUP992-24. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Star Micronics TUP992-24.

Similar manuals

A complete manual for the device Star Micronics TUP992-24, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Star Micronics TUP992-24 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Star Micronics TUP992-24.

A complete Star Micronics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Star Micronics TUP992-24 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Star Micronics TUP992-24, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Star Micronics TUP992-24, that we can find in the current document
3. Tips how to use the basic functions of the device Star Micronics TUP992-24 - which should help us in our first steps of using Star Micronics TUP992-24
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Star Micronics TUP992-24
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Star Micronics TUP992-24 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Star Micronics TUP992-24?

Use the form below

If you did not solve your problem by using a manual Star Micronics TUP992-24, ask a question using the form below. If a user had a similar problem with Star Micronics TUP992-24 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)