English dropdown-ico

Manual PAC SWI-JACK

8 pages 0.9 mb
Download

Go to site of 8

Summary
  • PAC SWI-JACK - page 1

    1 06-08-09 SWI-JACK Universal Steering Wheel Control Interface Before Y ou Start A. Is this product compatible with the vehicle? • See application guide (separate sheet) for listing of vehicles and connection information. If not, please visit http://www .pac-audio.com/swixprogramming/swixprogramming.asp for the most current list of compatible veh ...

  • PAC SWI-JACK - page 2

    2 SWI-JACK Wiring Connections Step 1. Connect the BLACK wire to ground (-). V erication: Wire or location registers a constant (-) when probed. Step 2. Connect the RED wire to switched +12V . V erication: Wire reg- isters +12V when the ignition key is turned to the ACC or ON posi- tions. Step 3. Connect the appropriate interface wire (WHITE, ...

  • PAC SWI-JACK - page 3

    3 06-08-09 Step 5. Refer to The V ehicle Application Guide . Note the INTERF ACE V ersion Number next to the selected vehicle. Fill in the information below for quick reference. The Radio Select Switch must be set BEFORE programming the INTERF ACE version number . Set the switch as follows: Alpine = 1, JVC = 2, Kenwood = 3, Clarion = 4 V alor = 5 O ...

  • PAC SWI-JACK - page 4

    4 Step 18. Press and hold program- ming/mode button on SWI-JACK. LED will light. Step 19. Release programming/ mode button. SWI-JACK SWI-JACK SWI-JACK Y ou only need to press the programming/mode button once to program all the buttons. If you press this button again after the interface is programmed, it will erase all previous learned buttons. SWI- ...

  • PAC SWI-JACK - page 5

    5 06-08-09 Programming the SWI-JACK to Control the Head Unit (cont.) The SWI-JACK must be programmed in the specic order shown in the chart below . If a function is not needed, it may be skipped by pressing the Program/Mode button 1 time per function in its place. The LED will ash once (indicating the function has been skipped) and then illum ...

  • PAC SWI-JACK - page 6

    6 SWI-JACK SWI-JACK Step 22. Release the button. The LED will turn on back on. Skip to Step 24. Step 24. If you need to program more buttons, repeat step 20 for each additional audio function on the steering wheel. Once programming is completed, wait 7 seconds. The LED will ash three times indi - cating end of program- ming. The Interface will t ...

  • PAC SWI-JACK - page 7

    7 06-08-09 T esting the SWI-JACK (For V ersion #4 only) T est each Heater function of the steering wheel controls. The TEMP and F AN should work properly . When testing the audio controls, the left LED on the SWI-JACK will ash indicating it is sending a command. If any function does not work, repeat the programming instructions (starting from St ...

  • PAC SWI-JACK - page 8

    8 T roubleshooting Guide Working on a new or unlisted vehicle? We are always looking for new vehicle information. If you’ve successfully completed the installation on a vehicle with steering wheel controls, and the vehicle is not listed in these instructions or on our Website, contact us at techsupport@pac-audio.com so that we may add the informa ...

Manufacturer PAC Category Car Stereo System

Documents that we receive from a manufacturer of a PAC SWI-JACK can be divided into several groups. They are, among others:
- PAC technical drawings
- SWI-JACK manuals
- PAC product data sheets
- information booklets
- or energy labels PAC SWI-JACK
All of them are important, but the most important information from the point of view of use of the device are in the user manual PAC SWI-JACK.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals PAC SWI-JACK, service manual, brief instructions and user manuals PAC SWI-JACK. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product PAC SWI-JACK.

Similar manuals

A complete manual for the device PAC SWI-JACK, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use PAC SWI-JACK by users. Manuals are usually written by a technical writer, but in a language understandable to all users of PAC SWI-JACK.

A complete PAC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual PAC SWI-JACK - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the PAC SWI-JACK, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the PAC SWI-JACK, that we can find in the current document
3. Tips how to use the basic functions of the device PAC SWI-JACK - which should help us in our first steps of using PAC SWI-JACK
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with PAC SWI-JACK
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of PAC SWI-JACK in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning PAC SWI-JACK?

Use the form below

If you did not solve your problem by using a manual PAC SWI-JACK, ask a question using the form below. If a user had a similar problem with PAC SWI-JACK it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)